PubMed Health⌕ Search

Biomedical subjects

A A Hincal

Publications and source records attributed to A A Hincal.

At least 19 recordsLinked to original sources

DEET-loaded solid lipid particles for skin delivery: in vitro release and skin permeation characteristics in different vehicles.

DEET (N,N-diethyl m-toluamide) is a lipophilic compound which has a common use as an insect repellent and causes not only skin irritation but also systemic side effects at high concentrations in long-term skin application. In this study, DEET is incorporated into solid lipid particles, a colloidal drug delivery system, in order to reduce the percutaneous permeation and avoid toxic effects and also maintain drug effectiveness on the skin surface for a long duration of insect repellence. Solid lipid particles were prepared based on emulsion systems at different concentrations and after the characterization studies, the formulation with 20% lipid phase and 1:1 drug:lipid ratio was carried to in vitro release and skin permeation studies. Solid lipid particles with DEET were compared to free DEET using cream and hydrophilic gel vehicles. Results showed that incorporation of DEET into solid lipid particles reduced the release rate and skin permeation of DEET. Imaging studies using scanning electron microscopy showed that there were still solid lipid particles on skin surface after 2 h indicating that DEET could be present for a longer time on the application site.

DEET↗

Potential use of freeze-drying technique for estimation of tissue water content.

Desiccation and freeze-drying methods were used for the estimation of water content of various rat tissues. In the desiccation method, the tissue samples were cut into small pieces and subsequently dried at 40 degrees C to constant weight. In the freeze-drying method, the prefrozen tissue samples were freeze-dried (-50 degrees C) for 24 h. Tissue water contents obtained by the desiccation and freeze-drying methods were very similar, with no significant difference between them. Regardless of the method, the highest tissue water content was found in testes (0.841 +/- 0.010 ml/g for freeze-drying and 0.865 +/- 0.002 ml/g for desiccation); the lowest values were obtained in bone (0.254 +/- 0.007 ml/g for freeze-drying and 0.267 +/- 0.003 ml/g for desiccation). Upon correction for the water content of residual tissue blood, regardless of the drying method, significant differences were found between corrected and uncorrected tissue water values of all tissues. However, for a given method, the difference between the tissue water contents was not significant after correcting for residual blood. The water content values for all tissues (except bone) agree well with those published previously and obtained by desiccation. All these clearly suggest that the freeze-drying method can be used as an alternative to desiccation for estimation of tissue water content.

Animals↗

The effects of lyophilization on the stability of liposomes containing 5-FU.

Multilamellar liposomes containing 5-fluorouracil (5-FU) were prepared by modified lipid film hydration method and were lyophilized with or without saccharose as cryoprotectant. The effect of lyophilization on the stability of liposomes was evaluated by comparing the vesicle size, encapsulation efficiency and the drug release rate before and after lyophilization/rehydration. The process of lyophilization, without cryoprotectant, resulted in particle size increase and significant content leakage. By the addition of saccharose, the lipid bilayers become more stable and less permeable to the encapsulated drug, saccharose imparted 5-FU retention of about 80% after lyophilization/rehydration. Freeze-drying did not affect the particle size of liposomes containing saccharose as cryoprotectant. The drug release profiles of rehydrated liposomes followed Higuchi's square root model. Also, the obtained release profiles were all biphasic: a rapid initial drug release phase (burst release of the portion of the drug that leaked out of liposomes during the lyophilization) was followed by a slower, approximately constant drug release phase (zero-order kinetics).

Antineoplastic Agents↗

In vitro and in vivo studies of ibuprofen-loaded biodegradable alginate beads.

The irritation effects of ibuprofen, a widely used non-steroidal anti-inflammatory drug (NSAID), were evaluated on mouse gastric and duodenal mucosa when suspended in 0.5% (w/v) sodiumcarboxymethylcellulose (NaCMC) solution and loaded in alginate beads. The ionotropic gelation method was used to prepare controlled release alginate beads of ibuprofen. The influence of various formulation factors on the encapsulation efficiency, as in vitro drug release and micromeritic properties, was investigated. Other variables included the alginate concentration, percentage drug loading and stirring speed during the microencapsulation process. Scanning electron micrographs of alginate beads loaded with ibuprofen showed rough surface morphology and particle sizes in the range of 1.15 +/- 0.4 - 3.15 +/- 0.6 mm. The yield of microspheres, as collected after drying, was generally 80-90%. Formulation code H showing t50% value of 3.5 h was chosen for in vivo trials because of the appropriate drug release properties. For in vivo trials, free ibuprofen (100 mg kg(-1)), blank and ibuprofen (100 mg kg(-1)) loaded alginate beads (formulation code H) were suspended in 0.5% (w/v) NaCMC solution and each group was given to six mice orally by gavage. NaCMC solution was used as a control in experimental studies. In vivo data showed that the administration of ibuprofen in alginate beads prevented the gastric lesions.

Alginates↗

Preparation and characterization of PLGA nanospheres for the targeted delivery of NR2B-specific antisense oligonucleotides to the NMDA receptors in the brain.

Treatment of central nervous system (CNS) diseases with potentially useful pharmaceuticals is prevented by the blood-brain barrier (BBB). The BBB is a unique protective barrier in the body. It is formed by epithelial-like tight junctions, which are expressed by the brain capillary endothelial cells. Although most molecules are potentially active in the CNS, they cannot readily enter the brain because of their properties. Antisense oligonucleotides (ODNs) have a great potential as neuropharmaceuticals; however, the large size and polar nature of nucleic acid drugs prevent these molecules from bypassing the BBB and readily entering the CNS following systemic administration. One approach to improve both the pharmacokinetics and the pharmacodynamics of ODNs involves the use of sustained-release polymer formulations, such as poly(lactide-co-glycolide) (PLGA) nanoparticulate systems. In this study, nanospheres were prepared by the emulsification diffusion technique and characterized in terms of particle size, surface morphology, encapsulation efficiency, in vitro release profiles and ODN stability. The nanospheres produced were spherical with homogenous size distribution. Nanospheres were prepared with different encapsulation efficiency. Release profiles of formulations were also evaluated. The results show that formulations with different ODN content exhibited different release profiles. Moreover, the chemical integrity of ODN during the processes was conserved. These results demonstrate that a stable ODN formulation could be prepared utilizing PLGA nanospheres as a potential delivery system for the treatment of CNS diseases.

Brain↗

In vitro cytotoxicity of mitoxantrone-incorporated albumin microspheres on acute promyelocytic leukaemia cells.

In the present study, the preparation and characterization of bovine serum albumin (BSA) microspheres and the evaluation of the in vitro cytotoxicity of these microspheres on acute promyelocytic leukaemia (HL-60) cells were described. Mitoxantrone (MTZ)-incorporated microspheres were evaluated for particle size, drug loading, release characteristics and surface morphology. The biological effect of MTZ released from BSA microspheres was determined on an in vitro cultured HL-60 cell line, showing that, after encapsulation, MTZ still retains cytotoxic activity. For this purpose, methyl-thiazol-tetrazolium (MTT) assay was used to evaluate the in vitro cytotoxicity of MTZ-loaded microspheres. Particle size of BSA microspheres was determined between 17.61-20.38 microm and they were smooth and spherical in shape. Encapsulation efficiency of the drug-loaded microspheres was between 22.26-60.50%. For MTZ-containing microspheres, the cell death ratios were greater than 80% for all formulations. This study demonstrate that BSA microspheres were well suited for the controlled release of MTZ and were promising for anti-cancer chemotherapy.

Animals↗

Effect of chitosan on a periodontal pathogen Porphyromonas gingivalis.

Local delivery systems of antimicrobial agents for treatment of the periodontal diseases received considerable attention during the past decade due to the disadvantages of the systemic administration. An ideal formulation should exhibit ease of delivery, a good retention at the application site, and a controlled release of the drug. The application of bioadhesive gels provides a long stay in the oral cavity, adequate drug penetration, high efficacy and acceptability. In dentistry and oral medicine, various applications of chitosan, which is a bioadhesive polymer have been proposed due to its favorable properties such as biocompatibility and biodegradability. The aim of this study was to determine the antimicrobial activity of chitosan formulations either in gel or film form against a periodontal pathogen, Porphyromonas gingivalis. The viscosity, bioadhesive properties and antimicrobial activity of chitosans at different molecular weight and deacetylation degree were evaluated in the absence or presence of chlorhexidine gluconate (Chx), incorporated into the formulations at 0.1 and 0.2% concentrations. The flow property of the gels were found to be suitable for topical application on the oral mucosa and to syringe into the periodontal pocket. Bioadhesion of the gels and films examined ex-vivo using fresh porcine buccal mucosa showed that both the film and gel formulations exert bioadhesive properties and was not affected by incorporation of Chx. Chitosan is shown to have an antimicrobial activity against P. gingivalis and this was higher with high molecular weight chitosan. The combination of chitosan with Chx showed a higher activity when compared to that of Chx alone, which would provide Chx application at lower concentrations thus avoiding its unwanted side effects. Chitosan films and gels seem to be promising delivery systems for local therapy of periodontal diseases with its bioadhesive property and antimicrobial activity.

Anti-Bacterial Agents↗

Drug permeation enhancement via buccal route: possibilities and limitations.

Over the last decade, there has been a particular interest in delivering drugs, especially peptides and proteins via the buccal route. It provides direct entry into the systemic circulation thus avoiding the hepatic first-pass effect and degradation in the gastrointestinal tract, ease of administration, and the ability to terminate delivery when required. However membrane permeation can be a limiting factor for many drugs administered via the buccal route, and the epithelium that lines the oral mucosa is a very effective barrier to the absorption of drugs. In order to deliver broader classes of drugs across the buccal mucosa, reversible methods of reducing the barrier potential of this tissue must be employed. This requisite has fostered the study of penetration enhancers that will safely alter the permeability restrictions of the buccal mucosa. It has been shown that buccal penetration can be improved by using various classes of transmucosal and transdermal penetration enhancers such as bile salts, surfactants, fatty acids and derivatives, chelators, cyclodextrins and chitosan. Among these chemicals used for the drug permeation enhancement, bile salts are most common. The first part of this paper focuses on work related to the elucidation of mechanisms of action of bile salts in buccal permeation enhancement of various drugs and mucosal irritation. In the second part, results showing the enhancing effect of chitosan on buccal permeation of hydrocortisone, a commonly used topical oral anti-inflammatory agent, and transforming growth factor beta (TGF-beta), which is a bioactive peptide to which the oral mucosa is relatively impermeable is presented.

Administration, Buccal↗

Approaches to education of pharmaceutical biotechnology in faculties of pharmacy.

Pharmaceutical biotechnology is developing rapidly both in academic institutions and in the biopharmaceutical industry. For this reason, FIP Special Interest Group of Pharmaceutical Biotechnology decided to develop a questionnaire concerning pharmaceutical biotechnology education. After preliminary studies were completed, questionnaires were sent to the leading scientists in academia and research directors or senior managers of various Pharmaceutical Biotechnology Companies in order to gather their views about how to create a satisfactory program. The objectives of this study were as follows: -To review all of the graduate and undergraduate courses which are presently available worldwide on pharmaceutical biotechnology in Faculties of Pharmacy. -To review all of the text books, references and scientific sources available worldwide in the area of pharmaceutical biotechnology. When replying to the questionnaires, the respondents were asked to consider the present status of pharmaceutical biotechnology education in academia and future learning needs in collaboration with the biotechnology industry. The data from various pharmacy faculties and biotechnology industry representatives from Asia, Europe and America were evaluated and the outcome of the survey showed that educational efforts in training qualified staff in the rapidly growing field of pharmaceutical biotechnology is promising. Part of the results of this questionnaire study have already been presented at the 57th International Congress of FIP Vancouver, Canada in 1997.

Biotechnology↗

Diclofenac sodium incorporated PLGA (50:50) microspheres: formulation considerations and in vitro/in vivo evaluation.

Recently, considerable interest has been focused on the use of biodegradable polymers for specialized applications such as controlled release of drug formulations; meanwhile, microsphere drug-delivery systems using various kinds of biodegradable polymers have been studied extensively during the past two decades. Poly (lactide-co-glycolide) (PLGA) polymers have been proven to be excellent drug carriers for microparticulate systems due to their advantages, e.g. biocompatibility and regulatory approval. The administration of nonsteroidal anti-inflammatory drugs (NSAIDs) into the intra-articular cavity in patients with chronic inflammatory disease is complicated due to the short duration of effect. In the present study, controlled-release parenteral formulations of diclofenac sodium (DS), a commonly used NSAID, were prepared for intra-articular administration, and evaluated in vitro for particle size, yield, drug loading, surface morphology and release characteristics. For in vivo studies, Technetium-99m labelled polyclonal human immunogammaglobulin (99m Tc-HIG) was used as the radiopharmaceutical to demonstrate arthritic lesions by gamma scintigraphy. Evaluation of arthritic lesions post-therapy in rabbits showed no significant difference in the group treated with PLGA (50:50) (mw 34000) DS microspheres compared to control groups.

Animals↗

Chitosan films and hydrogels of chlorhexidine gluconate for oral mucosal delivery.

Topical delivery of antimicrobial agents is the most widely accepted approach aimed at prolonging active drug concentrations in the oral cavity. As most antifungals do not posses inherent ability to bind to the oral mucosa, this is best achieved through improved formulations. Chitosan, a partially deacetylated chitin, which is a biologically safe biopolymer, prolongs the adhesion time of oral gels and drug release from them. Chitosan also inhibits the adhesion of Candida albicans to human buccal cells and has antifungal activity. The antifungal agent, chlorhexidine gluconate (Chx), also reduces C. albicans adhesion to oral mucosal cells. The aim of this study was to design a formulation containing chitosan for local delivery of Chx to the oral cavity. Gels (at 1 or 2% concentration) or film forms of chitosan were prepared containing 0.1 or 0.2% Chx and their in vitro release properties were studied. The antifungal activity of chitosan itself as well as the various formulations containing Chx was also examined. Release of Chx from gels was maintained for 3 h. A prolonged release was observed with film formulations. No lag-time was observed in release of Chx from either gels or films. The highest antifungal activity was obtained with 2% chitosan gel containing 0.1% Chx.

Absorption↗

Enhancing effect of chitosan on peptide drug delivery across buccal mucosa.

The buccal mucosa represents a potentially important topical route for delivery of peptide or protein drugs with some unique advantages such as the avoidance of hepatic first-pass metabolism and the acidity and protease activity encountered in the gastrointestinal tract. However, the bioavailabilities or relative potencies of intraorally administered peptides are usually quite low, unless permeabilizers are employed. Chitosan, a mucopolysaccharide of marine origin, has been claimed to act both as a bioadhesive and permeabilizer, making it a candidate system for mucosal drug delivery. In this study, the enhancement effect of chitosan in gel form for oral mucosa was investigated with a large bioactive peptide, transforming growth factor-beta (TGF-beta). Chitosan gel was prepared at 2% concentration in dilute lactic acid and TGF-beta was incorporated into the gel. The effect of chitosan as a permeabilizer was determined by measuring the flux of TGF-beta across porcine oral mucosa in an in vitro system. The localization of TGF-beta within the oral mucosa was determined by horizontal sectioning and counting. Chitosan was found to exert a marked permeabilizing effect on buccal mucosa for peptide drug.

Animals↗

In vitro/in vivo studies on a buccal bioadhesive tablet formulation of carbamazepine.

A buccoadhesive controlled-release system for delivery of carbamazepine (CBZ) was prepared by compression of hydroxypropyl methylcellulose (HPMC) and carbomer, incorporating a penetration enhancer, sodium glycodeoxycholate (GDC). The release behaviour of systems containing CBZ and various amounts of the two polymers with and without GDC was found to be non-Fickian. Formation of an interpolymer complex between HPMC and carbomer was confirmed in acidic medium by turbidity, viscosity and FT-IR measurements. Addition of the drug to the buccoadhesive formulation reduced the adhesion force significantly (p < 0.1). GDC did not have any effect on bioadhesion. Permeability of bovine buccal mucosa to CBZ was determined using Ussing diffusion chambers [1]. In vivo interaction between the tablet and tissue was examined histologically as well as by scoring mucosal irritation. Histological changes observed in the buccal epithelium after 4 h contact with the tablets containing GDC recovered completely within 24 h after removal. No measurable plasma level of CBZ was obtained either in the absence or presence of GDC.

Absorption↗

Formulation and in vitro/in vivo investigation of carbamazepine controlled-release matrix tablets.

Carbamazepine controlled-release tablet formulations containing hydroxypropyl methylcellulose (HPMC) as matrix material at different concentrations were developed and evaluated in vitro and in vivo. The formulation containing 10% HPMC (HPMC-10) showed a controlled-release profile comparable to that of a commercially available, controlled-release carbamazepine preparation (Tegretol CR 200). The kinetics of controlled-release carbamazepine tablets was examined in eight healthy volunteers. The peak plasma concentration of 1.99 +/- 0.56 micrograms.ml-1 was obtained for HPMC-10 at 15.0 +/- 9.0 h, and 1.33 +/- 0.35 micrograms.ml-1 for Tegretol CR 200 at 15.2 +/- 8.9 h, and AUC0-infinity values of 85.2 +/- 30.8 micrograms.h.ml-1 and 76.9 +/- 20.7 micrograms.h.ml-1, respectively. Developed formulation (HPMC-10) was found to be bioequivalent to Tegretol CR 200 and, controlled release was obtained with smoother concentration-time curve resulting in less fluctuations.

Adult↗

In vitro studies on enhancing effect of sodium glycocholate on transbuccal permeation of morphine hydrochloride.

During the perioperative period, gastric emptying rate and first-pass metabolism limit the use of peroral morphine. Buccal mucosa appears to be a potential site for delivery of morphine as it provides direct entry into the system circulation thereby avoiding the hepatic first-pass effect. However, the low permeability of the buccal epithelium results in a low flux of the drug. The use of a penetration enhancer is required to improve the bioavailability of the drug via buccal route. In this study, the enhancing effect of sodium glycocholate (GC) used at 10 mM and 100 mM concentrations on permeation of morphine hydrochloride (MPH) across the porcine buccal mucosa was studied in vitro. Furthermore, in conjunction with its permeation, accumulation of GC in the tissue with time was also studied in order to elucidate the relationship between GC and enhanced mucosal permeation of the drug. Franz diffusion cells were used in the experiments. Permeation of MPH was increased in the presence of 100 mM GC with an enhancement factor of 9.3 whereas no enhancement was obtained with 10 mM GC. The calculated permeability coefficient for MPH in the presence of 100 mM GC was 2.35 x 10(-5) cm/s. Accumulation of GC at 100 mM in the tissue appears to be more significant at 100 mM concentration which correlated well with the increased permeation of the drug. GC was diffused through the buccal epithelium significantly at 100 mM concentration. Interaction of GC with the tissue appears to be more significant at 100 mM concentration compared to 10 mM concentration, thus resulting in a significant enhancing effect.

Analgesics, Opioid↗

Naproxen incorporated lipid emulsions. I. Formulation and stability studies.

BACKGROUND: Intravenous lipid emulsions stabilized with phospholipids have been an attractive alternative as vehicles for drug delivery, particularly for the parenteral administration of drugs with solubility problems. METHODS: Naproxen (a poorly aqueous soluble non-steroidal anti-inflammatory agent) emulsions were formulated with different types of emulsifiers (soybean lecithin, synperonic PEF-127 and a 50:50 mixture of these). The stability of the various emulsion systems was evaluated at different temperatures (4, 25 and 40 degrees C) for a period of 6 months by measuring changes in pH, droplet size, viscosity and percentage oil separation. The percentage of naproxen incorporation and the degree of haemolysis induced by the different types of emulsion systems was also determined. RESULTS: The emulsifier type showed a pronounced effect on the physicochemical properties of the emulsion systems, whereas storage temperature and time did not. Irrespective of emulsifier type, storage temperature and time, the percentage incorporation of naproxen in emulsions was between 80 and 100%. The degree of haemolysis induced by other emulsion components (dimethylsulfoxide (DMSO) and naproxen solution in DMSO) was about 10 times higher than that induced by emulsion systems. CONCLUSION: Choice of emulsifier is the most important factor in the stability of the naproxen emulsions.

Anti-Inflammatory Agents, Non-Steroidal↗