PubMed Health⌕ Search

Biomedical subjects

A A Poot

Publications and source records attributed to A A Poot.

At least 19 recordsLinked to original sources
PubMed2006

First steps towards tissue engineering of small-diameter blood vessels: preparation of flat scaffolds of collagen and elastin by means of freeze drying.

Porous scaffolds composed of collagen or collagen and elastin were prepared by freeze drying at temperatures between -18 and -196 degrees C. All scaffolds had a porosity of 90-98% and a homogeneous distribution of pores. Freeze drying at -18 degrees C afforded collagen and collagen/elastin matrices with average pore sizes of 340 and 130 mum, respectively. After 20 successive cycles up to 10% of strain, collagen/elastin dense films had a total degree of strain recovery of 70% +/- 5%, which was higher than that of collagen films (42% +/- 6%). Crosslinking of collagen/elastin matrices either in water or ethanol/water (40% v/v) was carried out using a carbodiimide (N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride, EDC) in combination with a succinimide (N-hydroxysuccinimide, NHS) in the presence or absence of a diamine (J230) or by reaction with butanediol diglycidylether (BDGE), followed by EDC/NHS. Crosslinking with EDC/NHS or EDC/NHS/J230 resulted in matrices with increased stiffness as compared to noncrosslinked matrices, whereas sequential crosslinking with the diglycidylether and EDC/NHS yielded very brittle scaffolds. Ethanol/water was the preferred solvent in the crosslinking process because of its ability to preserve the open porous structure during crosslinking. Smooth muscle cells were seeded on the (crosslinked) scaffolds and could be expanded during 14 days of culturing.

Biomechanical Phenomena↗
PubMed2006

Oestrogen removal from biological pretreated wastewater within decentralised sanitation and re-use concepts.

Two parallel researches were performed; one focused on the fate of oestrogens in the biological treatment systems within decentralised sanitation and re-use concepts (DESAR), the second related to the development of a suitable specific removal method. A new affinity membrane was developed using antibodies as specific binding sites for hormone removal. It was found that, especially in anaerobic treatment, the core technology in DESAR, the removal is insufficient and therefore an additional separation method is required. The affinity membrane with antibodies was found to be a suitable additional method, though in the current system it only removes one selected compound. Future research will focus on making this method more feasible in practise.

Adsorption↗
PubMed2005

Electrospinning of collagen and elastin for tissue engineering applications.

Meshes of collagen and/or elastin were successfully prepared by means of electrospinning from aqueous solutions. Flow rate, applied electric field, collecting distance and composition of the starting solutions determined the morphology of the obtained fibres. Addition of PEO (M(w)=8 x 10(6)) and NaCl was always necessary to spin continuous and homogeneous fibres. Spinning a mixture of collagen and elastin resulted in fibres in which the single components could not be distinguished by SEM. Increasing the elastin content determined an increase in fibres diameters from 220 to 600 nm. The voltage necessary for a continuous production of fibres was dependent on the composition of the starting solution, but always between 10 and 25 kV. Under these conditions, non-woven meshes could be formed and a partial orientation of the fibres constituting the mesh was obtained by using a rotating tubular mandrel as collector. Collagen/elastin (1:1) meshes were stabilized by crosslinking with N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS). This treatment afforded materials with a high thermal stability (T(d)=79 degrees C) without altering their original morphology. Upon crosslinking PEO and NaCl were fully leached out. Smooth muscle cells grew as a confluent layer on top of the crosslinked meshes after 14 d of culture.

Animals↗
PubMed2005

A novel time resolved fluorometric assay of anoikis using Europium-labelled Annexin V in cultured adherent cells.

BACKGROUND: Adherent cells undergo apoptosis when detached from their home ground, a process called anoikis (homelessness). METHODS: We developed a new and sensitive method to analyse apoptosis and anoikis of adherent cell types using a time resolved fluorometric assay with Europium-labelled Annexin V. Anoikis was induced with tumor necrosis factor-alpha/cycloheximide and three cell fractions of the cell cultures were prepared and analysed. Fraction 1 consisted of adherent cells, analysed while growing on their support (without detachment by trypsinisation). Fraction 2 contained detached cells due to anoikis (floating cells) and fraction 3 contained apoptotic bodies. Both fractions 2 and 3 were present in the culture medium and were isolated by differential centrifugation. RESULTS: TNF-alpha treatment of three different types of adherent cell cultures induced a significant increase of the amount of floating cells (anoikis) and apoptotic bodies compared to control cell cultures. Also in the adherent cell fractions a small amount of apoptosis was observed. CONCLUSIONS: The novel time resolved assay provides the ability to analyse the cell death cascade in adherent cell cultures of the same sample at the same time in a sensitive and reproducible way.

Annexin A5↗
PubMed2003

In vivo behavior of poly(1,3-trimethylene carbonate) and copolymers of 1,3-trimethylene carbonate with D,L-lactide or epsilon-caprolactone: Degradation and tissue response.

The degradation and the tissue response evoked by poly(1,3-trimethylene carbonate) [poly(TMC)] and copolymers of TMC with either 52 mol % D,L-lactide (DLLA) or 89 mol % epsilon-caprolactone (CL) were evaluated in vivo by subcutaneous implantation of polymer films in rats for periods up to one year. Poly(TMC) specimens were extensively degraded after 3 weeks and, as confirmed by histology, totally resorbed in less than a year. A fast linear decrease in thickness and mass without a change in molecular weight was observed. Initially an acute sterile inflammatory tissue reaction, caused by the implantation procedure, was observed, followed by a mild macrophage-mediated foreign body reaction that lasted during the resorption period of the polymer. It is concluded that in vivo, poly(TMC) is degraded via surface erosion involving cellular-mediated processes. The degradation of the copolymers was slower than that of poly(TMC), taking place via autocatalyzed bulk hydrolysis, preferentially of ester bonds. The TMC-DLLA copolymer degraded 20 times faster than the TMC-CL one. In both cases, the tissue reaction upon implantation resembled a sterile inflammatory reaction followed by a foreign body reaction that led to the polymer encapsulation. Significant mass loss was only observed for the TMC-DLLA copolymer, which underwent 96% mass loss in 1 year. When extensive mass loss started, a mild-to-moderate secondary foreign body reaction, related to clearance of the polymer fragments, was triggered. The results presented in this study demonstrate that poly(TMC) and both TMC copolymers are biodegradable and biocompatible materials, making these polymers attractive for the preparation of short- and long-term degradable devices for soft tissue engineering.

Animals↗
PubMed2003

Preparation and evaluation of molecularly-defined collagen-elastin-glycosaminoglycan scaffolds for tissue engineering.

Extracellular matrix components are valuable building blocks for the preparation of biomaterials involved in tissue engineering, especially if their biological, chemical and physical characteristics can be controlled. In this study, isolated type I collagen fibrils, elastin fibres and chondroitin sulphate (CS) were used for the preparation of molecularly-defined collagen-elastin-glycosaminoglycan scaffolds. A total of 12 different scaffolds were prepared with four different ratios of collagen and elastin (1:9, 1:1, 9:1 and 1:0), with and without chemical crosslinking, and with and without CS. Collagen was essential to fabricate coherent, porous scaffolds. Electron microscopy showed that collagen and elastin physically interacted with each other and that elastin fibres were enveloped by collagen. By carbodiimide-crosslinking, amine groups were coupled to carboxylic groups and CS could be incorporated. More CS could be bound to collagen scaffolds (10%) than to collagen-elastin scaffolds (2.4-8.5% depending on the ratio). The attachment of CS increased the water-binding capacity to up to 65%. Scaffolds with a higher collagen content had a higher tensile strength whereas addition of elastin increased elasticity. Scaffolds were cytocompatible as was established using human myoblast and fibroblast culture systems. It is concluded that molecularly-defined composite scaffolds can be composed from individual, purified, extracellular matrix components. Data are important in the design and application of tailor-made biomaterials for tissue engineering.

Biocompatible Materials↗
PubMed2003

Preparation of degradable porous structures based on 1,3-trimethylene carbonate and D,L-lactide (co)polymers for heart tissue engineering.

Biodegradable porous scaffolds for heart tissue engineering were prepared from amorphous elastomeric (co)polymers of 1,3-trimethylene carbonate (TMC) and D,L-lactide (DLLA). Leaching of salt from compression-molded polymer-salt composites allowed the preparation of highly porous structures in a reproducible fashion. By adjusting the salt particle size and the polymer-to-particle weight ratio in the polymer-salt composite preparation the pore size and porosity of the scaffolds could be precisely controlled. The thermal properties of the polymers used for scaffold preparation had a strong effect on the morphology, mechanical properties and dimensional stability of the scaffolds under physiological conditions. Interconnected highly porous structures (porosity, 94%; average pore size, 100 microm) based on a TMC-DLLA copolymer (19:81, mol%) had suitable mechanical properties and displayed adequate cell-material interactions to serve as scaffolds for cardiac cells. This copolymer is noncytotoxic and allows the adhesion and proliferation of cardiomyocytes. During incubation in phosphate-buffered saline at 37 degrees C, these scaffolds were dimensionally stable and the number average molecular weight (Mn) of the polymer decreased gradually from 2.0 x 10(5) to 0.3 x 10(5) in a period up to 4 months. The first signs of mass loss (5%) were detected after 4 months of incubation. The degradation behavior of the porous structures was similar to that of nonporous films with similar composition and can be described by autocatalyzed bulk hydrolysis.

Biocompatible Materials↗
PubMed2003

Endothelialization of small-diameter vascular prostheses.

In the field of arterial vascular reconstructions there is an increasing need for functional small-diameter artificial grafts (inner diameter < 6mm). When autologous replacement vessels are not available, for example because of the bad condition of the vascular system in the patient, the surgeon has no other alternative than to implant a synthetic polymer-based vessel. After implantation the initial major problem concerning these vessels is the almost immediate occlusion, due to blood coagulation and platelet deposition, under the relatively low flow conditions. As the search for the perfect bio-inert polymer has not revealed a material with suitable properties for this application, improved performance of small-diameter artificial blood vessels is now being sought in the biological field. The poor blood-compatibility of an artificial vascular graft is not simply because of its coagulation-stimulating or platelet-activating properties, but more due to its inability to actively participate in the prevention of blood coagulation and platelet deposition. As these functions are naturally performed by endothelial cells, the utilization of these cells seems inevitable for the construction of a functional small-diameter artificial blood vessels. This review describes the current status of the use of endothelial cells to improve the performance of artificial vascular prostheses.

Biocompatible Materials↗
PubMed2001

Expression of leukocyte adhesion molecules by endothelial cells seeded on various polymer surfaces.

Although endothelial cell seeding in small-diameter vascular prostheses significantly improves graft survival, the detachment of adherent endothelial cells after the restoration of circulation remains one of the major obstacles. Because in vivo experiments indicate that leukocyte infiltration is involved in endothelial cell loss, we hypothesize that seeded endothelial cells become activated and express leukocyte adhesion molecules and cytokines because of an interaction with the underlying polymer surface. The aim of this study was to investigate the expression of the leukocyte adhesion molecules ICAM-1, VCAM-1, PECAM-1, and E-selectin by cultured human umbilical vein endothelial cells (HUVECs) and human adipose microvascular endothelial cells (HAMVECs). The cells were seeded on tissue culture poly(styrene) and the vascular graft materials Dacron and Teflon. The results of this study indicate that the expression of leukocyte adhesion molecules by cultured endothelial cells is mainly affected by the endothelial cell origin, that is, umbilical vein or adipose tissue. Expressions of both ICAM-1 and E-selectin by HUVECs and HAMVECs are characterized by the presence of two cell populations with distinct levels of expression. With respect to endothelial cell seeding in vascular prostheses, the increased expression of E-selectin by microvascular endothelial cells deserves further attention.

Cell Adhesion↗
PubMed2001

In vivo biocompatibility of carbodiimide-crosslinked collagen matrices: Effects of crosslink density, heparin immobilization, and bFGF loading.

Collagen matrices, crosslinked using N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide (E) and N-hydroxysuccinimide (N), were previously developed as a substrate for endothelial cell seeding of small-diameter vascular grafts. In the present study, the biocompatibility of various EN-crosslinked collagen matrices was evaluated following subcutaneous implantation in rats for periods up to 10 weeks. The effects of the crosslink density, referred to as the number of free primary amino groups per 1,000 amino acid residues (EN10, EN14, EN18, or EN22), the amount of heparin immobilized to EN14, and the effect of preloading heparinized EN14 with basic fibroblast growth factor (bFGF) on the induced tissue reaction were studied. EN-crosslinked collagen was biocompatible at both early and late time intervals, and matrices with high crosslink densities (i.e., EN14, EN10) especially demonstrated a significantly decreased antigenic response when compared to noncrosslinked collagen. Furthermore, increased crosslinking resulted in a decreased degradation rate. Immobilization of heparin onto EN14 resulted in a similar to EN14 (thus without heparin) or somewhat reduced tissue reaction, but fibrin formation and vascularization were increased with increasing quantities of immobilized heparin. Matrices preloaded with bFGF also demonstrated good biocompatibility, especially in combination with higher amounts of immobilized heparin. The latter matrices [EN14 with high heparin and bFGF, thus EN14-H (0.4)F and EN14-H(1.0)F] demonstrated significantly increased vascularization for periods up to 3 weeks. Neither heparin immobilization nor bFGF preloading induced an increased antigenic response. It is concluded that the results of this study justify further evaluation of bFGF preloaded, heparin immobilized EN14 collagen, as a matrix for endothelial cell seeding in experimental animals.

Animals↗
PubMed2001

Immobilization of heparin to EDC/NHS-crosslinked collagen. Characterization and in vitro evaluation.

In the present study, heparin immobilization to a non-cytotoxic crosslinked collagen substrate for endothelial cell seeding was investigated. Crosslinking of collagen using N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide (EDC) and N-hydroxysuccinimide (NHS) resulted in a material containing 14 free primary amino groups per 1000 amino acid residues (E/N14C). At a fixed molar ratio NHS:EDC of 0.6, the amount of heparin covalently immobilized to E/N14C increased with increasing molar ratios of EDC to heparin carboxylic acid groups (Hep-COOH), to a maximum of approximately 5-5.5 wt% at a ratio of 2. Upon incubation in cell culture medium of endothelial cells, 4 to 7% of the immobilized heparin was released during 11 days. Immobilization of increasing amounts of heparin to E/N14C progressively reduced activation of contact activation proteases. Optimal anticoagulant activity, as measured by thrombin inhibition, was obtained after heparin immobilization using a ratio of EDC to Hep-COOH of 0.2-0.4 (14-20 mg heparin immobilized per gram of collagen). Platelets deposited to (heparinized) E/N14C showed only minor spreading and aggregation, although heparin immobilization slightly increased the number of adherent platelets. The results of this study suggest that heparin immobilization to EDC/NHS-crosslinked collagen may improve the in vivo blood compatibility of this material.

Biocompatible Materials↗
PubMed2001

Relation between cell density and the secretion of von Willebrand factor and prostacyclin by human umbilical vein endothelial cells.

In this study, the relation between the density of human umbilical vein endothelial cells (HUVECs) cultured on TCPS and (crosslinked) collagen, and the secretion of von Willebrand factor (vWF) and prostacyclin (PGI2) was determined. Collagen was crosslinked using N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide (EDC) in combination with N-hydroxy-succinimide (NHS), resulting in a matrix containing 14 free primary amino groups per 1000 amino acid residues after crosslinking (E/N14C). HUVECs were seeded on E/N14C, non-crosslinked collagen (N-Coll) and fibronectin-coated TCPS at densities ranging from 2500 to 50,000 cells/cm2. After 1 day of culture, both basal and A23187-stimulated secretion of vWF (expressed per 1,000,000 cells) was considerably increased at low cell densities (i.e. below 5000 cells/cm2) on all substrates. Secretion of PGI2 gradually increased with decreasing cell densities below 10,000 cells/cm2. After 10 days of proliferation, cell numbers on all substrates exceeded 50,000 cells/cm2, irrespective of the seeding density. Concomitantly, the initial higher secretion of PGI2 and vWF at the lowest seeding densities was decreased after longer times of culture, to values comparable to those obtained for higher seeding densities.

Biocompatible Materials↗
PubMed2001

Binding and release of basic fibroblast growth factor from heparinized collagen matrices.

Endothelial cell seeding is a promising method to improve the performance of small-diameter vascular grafts. Growth of endothelial cells seeded on the luminal surface of synthetic vascular grafts, coated with a matrix suitable for cell seeding (e.g. collagen), can be accelerated by local, sustained release of basic fibroblast growth factor (bFGF). In this study two potential matrices for in vivo endothelial cell seeding were studied with respect to bFGF binding and release: collagen crosslinked using N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide (EDC) and N-hydroxysuccinimide (NHS), as well as heparinized EDC/NHS-crosslinked collagen. bFGF binding was determined after incubation of circular samples (10 mm diameter) with 0.25 ml bFGF solution for 90 min. Immobilization of increasing amounts of heparin, also using EDC and NHS, to crosslinked collagen containing 14 free primary amino groups per 1000 amino acid residues (E/N14C) resulted in binding of increasing amounts of bFGF. A plateau in bFGF binding was observed for heparinized E/N14C containing approximately 2.0-3.0 wt% of immobilized heparin which was obtained using a molar ratio of EDC to heparin-carboxylic acid groups of 0.4 during heparin immobilization (E/N14C-H(0.4)). At concentrations up to 840 ng bFGF/ml, 10% of the added bFGF bound to E/N14C, while binding of bFGF to E/N14C-H(0.4) amounted to 22%. Both E/N14C and E/N14C-H(0.4) pre-loaded with bFGF showed sustained bFGF release. A burst release of 30% in endothelial cell culture medium (CM) was observed for E/N14C during the first 6 h, compared to 2% release from E/N14C-H(0.4). After 28 days, the bFGF release from E/N14C and E/N14C-H(0.4) in CM amounted to 100 and 65%, respectively. Combined results of binding and release of bFGF indicate that compared to E/N14C, E/N14C-H(0.4) is the substrate of choice for bFGF pre-loading and subsequent endothelial cell seeding.

Biocompatible Materials↗
PubMed2001

Copolymers of trimethylene carbonate and epsilon-caprolactone for porous nerve guides: synthesis and properties.

Copolymers of trimethylene carbonate and epsilon-caprolactone were synthesized and characterized with the aim of assessing their potential in the development of a flexible and slowly degrading artificial nerve guide for the bridging of large nerve defects. The effect of the monomer ratio on the physical properties of the polymers and its influence on the processability of the materials was investigated. Under the applied polymerization conditions (130 degrees C, 3 days using stannous octoate as a catalyst) high molecular weight polymers (Mn above 93 000) were obtained. All copolymers had glass transition temperatures below room temperature. At trimethylene carbonate contents higher than 25 mol% no crystallinity was detected. A decrease in crystallinity resulted in the loss of strength and decrease in toughness, as well as in an increased polymer wettability. Amorphous poly(trimethylene carbonate), however, showed excellent ultimate mechanical properties due to strain-induced crystallization (Tm = 36 degrees C). Low crystallinity copolymers could be processed into dimensionally stable porous structures by means of immersion precipitation and by combination of this technique with the use of porosifying agents. Porous membranes of poly(trimethylene carbonate) could be prepared when blended with small amounts of high molecular weight poly(ethylene oxide). Poly(trimethylene carbonate) and poly(trimethylene carbonate-co-epsilon-caprolactone) copolymers with high epsilon-caprolactone content possess good physical properties and are processable into porous structures. These materials are most suitable for the preparation of porous artificial nerve guides.

Biocompatible Materials↗
PubMed2000

Endothelial cell seeding of (heparinized) collagen matrices: effects of bFGF pre-loading on proliferation (after low density seeding) and pro-coagulant factors.

Endothelial cell seeding to improve the performance of small-diameter vascular grafts requires a suitable substrate, such as crosslinked collagen. In addition to providing a suitable substrate for adhesion and growth of endothelial cells, proliferation of seeded endothelial cells can be enhanced by local, sustained release of basic fibroblast growth factor (bFGF, a heparin-binding growth factor for endothelial cells). We have previously shown that collagen crosslinked using N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide (EDC) and N-hydroxysuccinimide (NHS) supports adhesion and proliferation of human umbilical vein endothelial cells (HUVECs). In the present study, HUVECs were seeded on (heparinized) EDC/NHS-crosslinked collagen, pre-loaded with bFGF. Proliferation of HUVECs on (heparinized) crosslinked collagen increased with increasing amounts of pre-loaded bFGF. The minimal cell-seeding density required for proliferation proved to be very low after pre-loading the substrates with bFGF, and was 4-fold lower for heparinized crosslinked collagen compared to crosslinked collagen (250 versus 1000 cells/cm(2)). Pro-coagulant properties (von Willebrand factor secretion and tissue factor expression) of HUVECs seeded on (heparinized) crosslinked collagen, with or without pre-loading of bFGF, were comparable to those of HUVECs on TCPS. It is concluded that heparinized, EDC/NHS-crosslinked collagen pre-loaded with bFGF is a candidate matrix for in vivo endothelial cell seeding of synthetic vascular graft materials.

Cell Division↗