PubMed Health⌕ Search

Biomedical subjects

A B Edmundson

Publications and source records attributed to A B Edmundson.

At least 19 recordsLinked to original sources
PubMed1992

Three-dimensional structure of an Fv from a human IgM immunoglobulin.

An IgM(kappa) immunoglobulin from a patient (Pot) with Waldenstrom's macroglobulinemia was hydrolyzed with pepsin to release a fragment consisting of the 'variable' (V) domains of the light and heavy chains plus eight residue 'tails' from the 'constant' (C) domains. The crystal structure of this fragment was determined at 2.3 A resolution by molecular replacement and crystallographic refinement methods. When examined separately, the light chain component closely resembles another human kappa chain (Rei) in both the beta-pleated sheet regions and the 'hypervariable' loops. The conserved pleated sheets in the heavy chain are similar to those in the human Kol IgG1 protein, but the third hypervariable loop in particular is different from that in any immunoglobulin structure described to date. As in the Kol protein, this loop blocks the access to any internal active site along the light-heavy chain interface. Unlike the Kol protein, however, the loop does not protrude beyond the boundaries of a conventional antigen combining site. Instead, it forms a very compact structure, which fills almost all residual space between the domains. This is an example of one dominant complementarity-determining region (CDR) essentially negating the diversity possible with five other CDRs in the two chains. Ordered water molecules are associated with light chain constituents along the interface, but not with CDR3 of the heavy chain. In screening exercises the Pot IgM failed to bind a wide variety of peptides. Together, the results suggest that ligand binding can only occur on external surfaces of the protein. These surfaces carry a limited number of side chains usually assigned to CDRs in more typical antibodies.

Amino Acid Sequence↗
PubMed1992

Human autoantibodies reactive with synthetic autoantigens from T-cell receptor beta chain.

We used mapping with synthetic overlapping peptides in combination with molecular modeling to analyze the IgG antibodies that humans naturally produce against human T-cell receptor beta chains and to localize the recognized peptide autoantigens in the three-dimensional structure of the molecule. Healthy individuals produce low levels of antibodies against T-cell receptor peptides, and these can be increased in autoimmune diseases. We characterized the reactivities in detail because IgG molecules reactive with self peptides occur in preparations of intravenous immunoglobulin and can be isolated by immunoaffinity chromatography. Natural IgG antibodies were directed against three major peptides. One corresponds to the first complementarity-determining region of the variable region. A second corresponds to the third framework of the variable region. The third is located in the constant region and is predicted to be a loop that extends out of the beta-barrel structure. This peptide is one that would give a characteristic structural distinction between the beta-chain constant region and the constant regions of immunoglobulin light chains to which beta chains are homologous. The capacity to bind these peptides is found in small fractions of normal polyclonal IgG, which contains both kappa chains and lambda chains. The activity is antibody-like in being confined to the Fab fragment and in its capacity to discriminate among homologous synthetic peptides corresponding to distinct beta-chain variable-region genes. We propose that a recognition and regulatory process naturally occurs that parallels the immune network for the regulation of the production of antibodies.

Adult↗
PubMed1992

Antigenic mapping of a human lambda light chain: correlation with three dimensional structure.

Although the amino acid sequence and three-dimensional structure of human immunoglobulin light chains have been known for more than 15 years, the location of antigenic markers characteristic of lambda chains has not been determined. Here, we use a set of synthetic overlapping peptides to completely model the sequence of the lambda chain Mcg and test these for the binding of rabbit and goat antisera specific for lambda chain determinants. We assess peptide contributions to lambda-antigenic reactivity and also to identify a portion of C-region where conformational factors contribute to the antigenicity. Specific determinants occur both in the constant and variable (first and third framework) domains of the molecule. The fourth framework of the variable region, a segment specified by the joining gene, is also recognized and cross-reacts antigenically with the homologous region of T cell receptor beta chains. Major lambda specific determinants are localized in the N- and C-terminal segments, which are linear and devoid of major conformational folding. Other segments that are strongly antigenic, such as the third framework of the V region (residue 78-93) and a segment of the constant region (residues 177-192), show strong conformational dependence in antigenicity.

Amino Acid Sequence↗
PubMed1991

Binding of peptides to proteins: an exercise in molecular design.

Peptides coupled to solid supports were systematically tested for binding activity with a polyreactive immunoglobulin light chain dimer by the methods of Geysen and colleagues. Once identified, peptides of progressively increasing affinity for the dimer were synthesized in milligram quantities and diffused into crystals of the protein. The three-dimensional structures of the peptide-protein complexes were determined by X-ray analysis and crystallographic refinement. Criteria for the design of ligands to fill the binding cavity in incremental stages could be formulated from the combined results of peptide scanning and crystallographic analyses. Histidine proved to be an important substituent in the binding series. It was possible to manipulate the properties of this amino acid residue to alter the structures and binding patterns of the ligands. For example, if two beta-alanine residues were added to the carboxyl end of a tetrapeptide ligand, the terminal carboxyl group formed an intramolecular ion pair with the imidazolium group (N-3) of histidine. This interaction was accompanied by cleavage of the intra molecular hydrogen bond between N-1 of histidine and the amide group of a glutamine side chain. The shape of the ligand shifted from a compact to an extended form and the mode of binding changed from a lock-and-key to an induced-fit type. The direction of entry of dipeptides of histidine and proline into the binding cavity (normally amino end first) could be reversed (carboxyl end first) by protonation of the histidine ring.

Amino Acid Sequence↗
PubMed1991

An autoantibody to single-stranded DNA: comparison of the three-dimensional structures of the unliganded Fab and a deoxynucleotide-Fab complex.

Crystal structures of the Fabs from an autoantibody (BV04-01) with specificity for single-stranded DNA have been determined in the presence and absence of a trinucleotide of deoxythymidylic acid, d(pT)3. Formation of the ligand-protein complex was accompanied by small adjustments in the orientations of the variable (VL and VH) domains. In addition, there were local conformational changes in the first hypervariable loop of the light chain and the third hypervariable loop of the heavy chain, which together with the domain shifts led to an improvement in the complementarity of nucleotide and Fab. The sugar-phosphate chain adopted an extended and "open" conformation, with the base, sugar, and phosphate components available for interactions with the protein. Nucleotide 1 (5'-end) was associated exclusively with the heavy chain, nucleotide 2 was shared by both heavy and light chains, and nucleotide 3 was bound by the light chain. The orientation of phosphate 1 was stabilized by hydrogen bonds with serine H52a and asparagine H53. Phosphate 2 formed an ion pair with arginine H52, but no other charge-charge interactions were observed. Insertion of the side chain of histidine L27d between nucleotides 2 and 3 resulted in a bend in the sugar-phosphate chain. The most dominant contacts with the protein involved the central thymine base, which was immobilized by cooperative stacking and hydrogen bonding interactions. This base was intercalated between a tryptophan ring (no. H100a) from the heavy chain and a tyrosine ring (no. L32) from the light chain. The resulting orientation of thymine was favorable for the simultaneous formation of two hydrogen bonds with the backbone carbonyl oxygen and the side chain hydroxyl group of serine L91 (the thymine atoms were the hydrogen on nitrogen 3 and keto oxygen 4).

Amino Acid Sequence↗
PubMed1991

Atomic force microscopy: seeing molecules of lipid and immunoglobulin.

The atomic force microscope (AFM) can image individual molecules by raster-scanning a sharp tip over a surface. In this paper we present molecular-resolution images of immunoglobulin M (IgM) and of ultraviolet light-polymerized films of the lipid dimethyl-bis(pentacosadiynoyloxyethyl) ammonium bromide ("BRONCO"). The polar head groups of individual lipid molecules can be resolved on the surface of this and other lipid films. These lipid films also provide a good substrate for AFM imaging of DNA and of other molecules such as antibodies. Because the AFM scans surfaces, it is most often successful at imaging either molecules that can form an array on a surface or molecules that are quite firmly attached to a surface. The ability of the AFM to operate under water, buffers, and other liquids makes it possible to study biological molecules under conditions in which they are physiologically active. Imaging of the actual molecular process of fibrin polymerization shows the potential of the AFM for studying biological processes. In the six years since its invention, the AFM has excited much interest and has imaged molecules in a wide range of systems.

Antibodies↗
PubMed1990

Active site structure and antigen binding properties of idiotypically cross-reactive anti-fluorescein monoclonal antibodies.

This report includes complete VH and V kappa nucleotide and deduced amino acid sequences of idiotypically cross-reactive monoclonal anti-fluorescein antibodies that differed greater than 10(5)-fold in affinity. High affinity monoclonal antibody 4-4-20 and intermediate affinity antibodies 10-25, 5-14, 9-40, 12-40, and 3-24 utilized greater than or equal to 90% homologous VHIIIC germ-line genes. Extensive D segment length and sequence variability were observed; however, compensatory germ-line JH4 (4-4-20 and 3-24) or JH3 (10-25, 5-14, 9-40, and 12-40) sequence lengths resulted in H chain CDR3 + FR4 to be a constant 18 amino acids. In addition, each antibody and low affinity 3-13 rearranged greater than or equal to 96% homologous V kappa II genes to J kappa 1, except for 10-25 (J kappa 5) and 3-13 (J kappa 4). Resolved crystal structure of complexed fluorescein and 4-4-20 Fab fragments revealed residues HisL27d, TyrL32, ArgL34, SerL91, TrpL96, and TrpH33 acted as hapten contact residues. Antibodies 5-14, 9-40, 12-40, and 3-24 primary structures possessed identical contact residues as 4-4-20 except for the substitution of HisL34 for ArgL34. Thus, ArgL34 was implicated in the increased affinity of monoclonal antibody 4-4-20. Finally, it was difficult to correlate extensive H chain CDR3 residue heterogeneity directly with fluorescein binding and idiotypy.

Amino Acid Sequence↗
PubMed1990

Three-dimensional structure of a hybrid light chain dimer: protein engineering of a binding cavity.

An attempt was made to engineer a binding site and check its structure by X-ray analysis. Two human light chains (Mcg and Weir), with "variable" domain sequences differing in 36 positions, were hybridized into a heterologous dimer and crystallized in ammonium sulfate by the same procedure used for the trigonal form of the Mcg dimer. The three-dimensional structure of the hybrid was determined at 3.5-A resolution by difference Fourier analysis, interactive model building with computer graphics and crystallographic refinement. In the heterologous dimer, the Weir protein behaved as the structural analog of the heavy chain in an antigen binding fragment, while the Mcg protein assumed the role of the light chain component. The hybrid and the Mcg dimer were closely similar in overall structure, an observation probably correlated with the deliberate cleavage of the intrachain disulfide bond in the variable domain of the Weir protein during the hybridization procedure. Examination of the crystal structure of the hybrid suggested that the cleavage resulted in the relaxation of restraints which might otherwise have interfered with the formation of an Mcg-like dimer. There were six substitutions among the residues lining the binding cavities of the hybrid and Mcg dimer. These substitutions significantly affected the sizes, shapes and binding properties of the two cavities.

Amino Acid Sequence↗
PubMed1989

Three-dimensional structure of a light chain dimer crystallized in water. Conformational flexibility of a molecule in two crystal forms.

The three-dimensional structure of an immunoglobulin light chain dimer (Mcg) crystallized in deionized water (orthorhombic form) was determined at 2.0 A resolution by phase extension and crystallographic refinement. This structure was refined side-by-side with that of the same molecule crystallized in ammonium sulfate (trigonal form). The dimer adopted markedly different structures in the two solvents. "Elbow bend" angles between pseudo 2-fold axes of rotation relating pairs of "variable" (V) and "constant" (C) domains were found to be 132 degrees in the orthorhombic form and 115 degrees in the trigonal form. Modes of association of the V domains and, to a lesser extent, the pairing interactions of the C domains were different in the two structures. Alterations in the V domain pairing were reflected in the shapes of the binding regions and in the orientations of the side-chains lining the walls of the binding sites. In the trigonal form, for instance, the V domain interface was compartmentalized into a main binding cavity and a deep pocket, whereas these spaces were continuous in the orthorhombic structure. Patterns of ordered water molecules were quite distinct in the two crystal types. In some cases, the solvent structures could be correlated with conformational changes in the proteins. For example, close contacts between V and C domains of monomer 1 of the trigonal form were not retained in orthorhombic crystals. Ordered water molecules filled the space created when the two domains moved apart.

Bence Jones Protein↗
PubMed1989

Synthetic site-directed ligands.

Complexes of nucleotides, peptides and aromatic hapten-like compounds with immunoglobulin fragments were studied by X-ray analysis. After tri- or hexanucleotides of deoxythymidylate were diffused into triclinic crystals of a Fab (BV04-01) with specificity for single-stranded DNA, extensive changes were detected throughout the structure of the protein. The Fab co-crystallized with a tri- or pentanucleotide in a different space group (monoclinic), an observation sometimes correlated with alterations in the structure of the 'native' protein. Structural analyses of the co-crystals are in progress for direct comparisons with the unliganded Fab. In crystals of a human (Mcg) Bence-Jones dimer, synthetic opioid peptides, chemotactic peptides or dinitrophenyl (DNP) derivatives could be diffused into a large conical binding cavity. The conformations of both the ligand and the protein were usually altered during the binding process. At the base of the cavity tyrosine residues could be displaced like trap-doors to permit entry of some opioid peptides and DNP compounds into a deep binding pocket. In co-crystals of the dimer and bis(DNP)lysine, two ligand molecules were bound in tandem, one in the main cavity and the second in the deep pocket. One ligand adopted an extended conformation, with the epsilon-DNP ring near the floor of the main cavity and the alpha-DNP group in solvent outside the binding site. There were no significant conformational changes in the protein. In contrast, the second ligand was very compact, with DNP rings immersed in the deep pocket, and the binding site was expanded to accommodate the oversized ligand. Peptides designed to be specific for the main cavity were incrementally constructed from minimal binding units by M. Geysen, G. Trippick, S. Rodda and their colleagues. A pentapeptide optimized for binding by this method was diffused into a crystal of the dimer and found by Fourier difference analysis to lodge exclusively in the main cavity as predicted. Binding regions in the BV04-01 Fab and the Mcg dimer were markedly different in size and shape. The Fab had a groove-type site, in which a layer of sidechains acted like a false floor over regions analogous to the cavity and deep pocket of the Bence-Jones dimer.

Antibodies, Monoclonal↗
PubMed1989

Three-dimensional structure of a fluorescein-Fab complex crystallized in 2-methyl-2,4-pentanediol.

The crystal structure of a fluorescein-Fab (4-4-20) complex was determined at 2.7 A resolution by molecular replacement methods. The starting model was the refined 2.7 A structure of unliganded Fab from an autoantibody (BV04-01) with specificity for single-stranded DNA. In the 4-4-20 complex fluorescein fits tightly into a relatively deep slot formed by a network of tryptophan and tyrosine side chains. The planar xanthonyl ring of the hapten is accommodated at the bottom of the slot while the phenylcarboxyl group interfaces with solvent. Tyrosine 37 (light chain) and tryptophan 33 (heavy chain) flank the xanthonyl group and tryptophan 101 (light chain) provides the floor of the combining site. Tyrosine 103 (heavy chain) is situated near the phenyl ring of the hapten and tyrosine 102 (heavy chain) forms part of the boundary of the slot. Histidine 31 and arginine 39 of the light chain are located in positions adjacent to the two enolic groups at opposite ends of the xanthonyl ring, and thus account for neutralization of one of two negative charges in the haptenic dianion. Formation of an enol-arginine ion pair in a region of low dielectric constant may account for an incremental increase in affinity of 2-3 orders of magnitude in the 4-4-20 molecule relative to other members of an idiotypic family of monoclonal antifluorescyl antibodies. The phenyl carboxyl group of fluorescein appears to be hydrogen bonded to the phenolic hydroxyl group of tyrosine 37 of the light chain. A molecule of 2-methyl-2,4-pentanediol (MPD), trapped in the interface of the variable domains just below the fluorescein binding site, may be partly responsible for the decrease in affinity for the hapten in MPD.

Antibodies, Monoclonal↗
PubMed1989

Similar binding properties of peptide ligands for a human immunoglobulin and its light chain dimer.

The urinary light chain dimer and serum monoclonal IgG1 protein from a patient (Mcg) with multiple myeloma and amyloidosis were systematically tested for their binding activities to peptides presented on solid supports. The system was validated using a series of enkephalins, beta-casomorphins and DNP-lysine derivatives which were known to complex with the dimer. Sets of peptide ligands binding to the proteins were constructed by incremental additions of amino acid residues to minimal binding units [Geysen et al., J. Immun. Meth. 102, 259-274 (1987)]. Both the amino acid sequences and the combinations of optical isomers were optimized at each stage of the syntheses. Binding could be demonstrated for ligands ranging in size from a tethered single amino acid to pentapeptides. At the dipeptide levels, the dimer and the IgG1 protein showed different preferences (Hp versus qf, where lower case letters designate D-amino acid residues). However, in a tetrapeptide ligand (qfHp) for the dimer, both of these initial preferences had converged. With few exceptions, the IgG1 molecule showed binding activity for the ligands developed for the dimer. Two sets of selected peptides, one based on Hp and the other on mW, were synthesized for diffusion into crystals of the dimer. X-ray analyses showed that these peptides bound exclusively in the main binding cavity between the "variable" domains of the dimer. As predicted from the ELISA results with tethered ligands, the relative occupancies in the crystals followed the order of tetrapeptide greater than tripeptide much greater than dipeptide. The crystallographic studies confirmed that peptides with very different sequences can bind in the same cavity.

Bence Jones Protein↗
PubMed1989

Cocrystallization of an immunoglobulin light chain dimer with bis(dinitrophenyl) lysine: tandem binding of two ligands, one with and one without accompanying conformational changes in the protein.

Previous studies showed that the Mcg dimer of immunoglobulin light chains bound bis(dinitrophenyl)lysine both in trigonal crystals and in solution. On prolonged storage in ammonium sulfate, mixtures of ligand and protein produced small trigonal cocrystals in low frequency. These crystals were nearly isomorphous with those of the unliganded dimer in which the subunits were covalently linked by an interchain disulfide bond. By difference Fourier analyses at 3.5 A resolution and subsequent crystallographic refinement, the cocrystals were found to contain molecules with two ligands aligned in tandem along the interface of the variable (V) domains of the protein. One ligand molecule adopted an almost fully extended conformation, with the epsilon-DNP ring situated near the floor, the alpha-carboxyl group directed toward the solvent at the entry, and the alpha-DNP ring outside the rim of the main cavity. As if architecturally designed, the ligand was located symmetrically between the two domains in an orientation that was compatible with both the unaltered structure of the cavity lining and with the known crystal packing interactions of neighboring protein molecules. The second ligand molecule in the cocrystal lodged in the deep pocket immediately under the floor of the main cavity. The ligand adopted a very compact conformation with the two DNP rings roughly antiparallel to each other. This molecule appeared to be semi-permanently sequestered in the pocket since it could not be dislodged by exhaustive perfusion with ammonium sulfate crystallizing media. Relative to its volume in the native dimer, the pocket was expanded to accommodate the oversized ligand. Within a single protein molecule, therefore, two types of binding of a flexible ligand were observed, one with and one without accompanying conformational changes in the protein. The number of cocrystals which could be produced was markedly increased if the interchain disulfide bond between the Mcg monomers was first reduced and alkylated.

Ammonium Sulfate↗
PubMed1989

Evolution of immunoglobulin light chains: cDNA clones specifying sandbar shark constant regions.

Sharks are living fossils that are indistinguishable morphologically from their Devonian ancestors of approximately equal to 400 million years ago. If parallel conservatism characterizes their biochemical evolution, characterization of their immunoglobulin chains could provide information regarding the primordial features of these essential defense molecules. Shark immunoglobulins are polydisperse like those of mammals, but these species lack homogeneous myeloma proteins. This heterogeneity has precluded direct determination of the sequence of elasmobranch light-chain proteins. We have sequenced four cDNA clones that contain the constant-region sequence as well as varying degrees of variable- or joining-region segments. The sandbar shark (Carcharhinus plumbeus) has at least four distinct light-chain constant regions, and these can be considered homologs of mammalian lambda chains. Approximately 40% identity was found in comparison from sharks to mammals. Certain stretches of sequence were remarkably conserved, whereas others varied in a manner consistent with accepted concepts of speciation. One hexapeptide (Ala-Thr-Leu-Val-Cys-Leu) occurred in lambda constant regions of all vertebrate species. There was a universal conservation of certain cysteines, phenylalanines, tryptophans, and glycines and strong identities in the block of residues from Ser-176 to Trp-186. Comparison of the shark sequence with that of the characterized human lambda myeloma protein Mcg indicates a strong conservation of three-dimensional structure in this light-chain domain representing species whose ancestors diverged early in vertebrate evolution. The shark light-chain sequence contains primordial features shared by mammalian kappa and lambda chains and by T-cell receptor beta chains.

Amino Acid Sequence↗
PubMed1988

Differences in crystal properties and ligand affinities of an antifluorescyl Fab (4-4-20) in two solvent systems.

An antigen-binding fragment (Fab) from a murine monoclonal antibody (4-4-20) with high affinity for fluorescein was cocrystallized with ligand in polyethylene glycol (PEG) and 2-methyl-2,4-pentanediol (MPD) in forms suitable for X-ray analyses. In MPD the affinity of the intact antibody for fluorescein was 300 times lower than the value (3.4 x 10(10) M-1) obtained in aqueous buffers. This decreased affinity was manifested by the partial release of bound fluorescein when MPD was added to solutions of liganded Fab during crystallization trials. In PEG, the ligand remained firmly bound to the protein. The liganded Fab crystallized in the monoclinic space group P2(1) in PEG, with a = 58.6, b = 97.2, c = 44.5 A and beta = 95.2 degrees. In MPD the space group was triclinic P1, with a = 58.3, b = 43.4, c = 42.3 A, alpha = 83.9 degrees, beta = 87.6 degrees, and gamma = 84.5 degrees. X-ray diffraction data were collected for both forms to 2.5-A resolution. Surprisingly, the triclinic form of the liganed antifluorescyl Fab had the same space group, closely similar cell dimensions, and practically the same orientation in the unit cell as an unliganded Fab (BV04-01) with activity against single-stranded DNA.

Animals↗
PubMed1987

The binding of opioid peptides to the Mcg light chain dimer: flexible keys and adjustable locks.

Enkephalins and beta-casomorphins (opioid peptides) were found to bind in a variety of conformations to a human light chain (Bence-Jones) dimer from a patient (Mcg) with amyloidosis. The peptides were diffused into crystals of the protein and their positions, relative occupancies and modes of binding were determined at 2.7 A resolution by difference Fourier analyses. Collectively, the opioid peptides occupied practically all of the available space in the concave, internal parts of the binding region, as well as flat or convex external surfaces around the rim of the binding cavity. Suitable ligands ranged in size from four to seven residues. As many as five residues could be accommodated inside the binding region, and there was space for at least four residues on the external surfaces. External binding was influenced by solvent effects and local packing interactions among adjacent protein molecules in the crystal lattice. In the enkephalin series the presence of amino-terminal tyrosine was necessary, but not sufficient for binding. [Met]-enkephalin, a pentapeptide, showed two different modes of binding in overlapping subsites. In one subsite, preferred over the second in a ratio of 1.3:1.0, the side chain of amino-terminal tyrosine penetrated through the floor of the main cavity to lodge in the deep binding pocket about 20 A from the entrance. The remainder of the peptide spanned the length of the main cavity in an extended conformation. In the second subsite the amino end was restricted to the main cavity and the peptide backbone turned abruptly upward at residue 3 to interact with external surfaces. An (Arg-6, Phe-7) heptapeptide extension of [Met]-enkephalin entered the deep pocket and assumed an extended conformation in the main cavity like the pentapeptide. Its last two residues flattened against the external surfaces. [Leu]-enkephalin and its analogues displayed a combination of internal and external binding like [Met]-enkephalin in its secondary subsite. Enkephalin analogues with D-amino acids in position 2 generally adopted conformations which were more convoluted than those in the L-isomers. Moreover, external interactions tended to be more prominent in the D-derivatives. The beta-casomorphin-7 heptapeptide penetrated into the deep pocket and traversed the main cavity in as extended a conformation as the presence of two proline residues would permit. On removal of the ligand there was an unexpected hysteresis effect involving permanent structural alterations in the walls of the binding region. beta-casomorphins-4 and -5 were bound in the main cavity with the carboxyl ends protruding from the entrance.(ABSTRACT TRUNCATED AT 400 WORDS)

Bence Jones Protein↗
PubMed1987

Localization of an idiotope on the L chain dimer and intact IgG1 immunoglobulin from the patient Mcg.

A monoclonal anti-idiotype (M3.9) raised against the covalently linked Mcg lambda chain dimer binds with a similar affinity to the Mcg IgG immunoglobulin and covalent heterodimers of Mcg with other human L chains. Despite having identical amino acid sequences, the two light chains in the Mcg dimer adopt different conformations with monomer 1 acting as a heavy chain analog and monomer 2 behaving like a light chain component of an Fab. As the lambda chain in the Mcg IgG and at least one hybrid L chain dimer (Mcg X Weir) assumes a conformation similar to that of monomer 2 and the binding of anti-idiotype requires only the presence of a single Mcg lambda chain, we conclude that the idiotope is restricted to the monomer 2 type of the Mcg lambda chain conformational isomer. Cooperative binding of two molecules of rhodamine 123 in the main cavity of the Mcg dimer block the binding of the anti-idiotype whereas the binding of one molecule of bis(DNP)lysine has no significant effect on the idiotype-anti-idiotype system. Previous crystallographic analyses indicated that bound rhodamine 123 protrudes outside the rim while bis(DNP)lysine is completely immersed in the cavity. At high concns bis(DNP)lysine penetrates through the floor of the main cavity and forms a virtually irreversible complex with the dimer. Production of this complex is accompanied by conformational changes, which are presumed to be correlated with observed inhibition of binding with the anti-idiotype M3.9. Expression of the idiotope probably involves more than one linear sequence since reduction and alkylation of the intra- and inter-chain disulphide bonds in 8 M urea leads to a complete loss of binding of the anti-idiotype. The inhibition data suggest involvement of residues on or near the rim of the main cavity. Distribution of potential contact residues for rhodamine 123 is asymmetric only in the case of aspartic acid 97, which is located on the cavity rim in only one conformational isomer (monomer 2). The homologous residue in monomer 1 is directed away from the cavity and is unlikely to participate in the epitope recognized by M3.9. Attempts to define the epitope in more detail by simulation with multiple peptides have been initiated in collaboration with the laboratory of H. M. Geysen.

Amyloidosis↗