Biomedical subjects

A Büchter

Publications and source records attributed to A Büchter.

6 recordsLinked to original sources

PubMed2005

Design and performance of a bioreactor system for mechanically promoted three-dimensional tissue engineering.

There is currently considerable interest in increasing the response of mesenchymal cells to physical forces, and numerous loading devices have been used to increase the formation of skeletal tissue in vivo and in vitro. We have developed a bioreactor system to apply cyclic strains on three-dimensional specimens over a range of 0-20,000 mustrain. The piezoelectric-driven mechanism allows the precise adjustment and control over load-related deformations of tissue, as shown by finite-element calculations of deformation of a collagen gel under load. We present the design of the bioreactor and its performance in specimens of tissue containing activated osteoblasts and chondrocytes. Biaxial tissue straining at 2,000 mustrain led to a substantial increase in the number of both types of cell compared with unstimulated controls. The synthesis of cell-specific extracellular matrix proteins increased when physiological loads (2,000 mustrain) were applied in the bioreactor, whereas higher deformations (20,000 mustrain) resulted in a reduction in proliferation and differentiation of cells. The mechanisms whereby mechanical stimulation leads to a defined cell reaction are not known, but the application of physiological micromovements in extracorporeal tissue chambers is a promising approach to the formation of hard tissue.

Animals↗

PubMed2005

Basic reactions of osteoblasts on structured material surfaces.

In order to assess how bone substitute materials determine bone formation in vivo it is useful to understand the mechanisms of the material surface/tissue interaction on a cellular level. Artificial materials are used in two applications, as biomaterials alone or as a scaffold for osteoblasts in a tissue engineering approach. Recently, many efforts have been undertaken to improve bone regeneration by the use of structured material surfaces. In vitro studies of bone cell responses to artificial materials are the basic tool to determine these interactions. Surface properties of materials surfaces as well as biophysical constraints at the biomaterial surface are of major importance since these features will direct the cell responses. Studies on osteoblastlike cell reactivity towards materials will have to focus on the different steps of protein and cell reactions towards defined surface properties. The introduction of new techniques allows nowadays the fabrication of materials with ordered surface structures. This paper gives a review of present knowledge on the various stages of osteoblast reactions on material surfaces, focused on basic cell events under in vitro conditions. Special emphasis is given to cellular reactions towards ordered nano-sized topographies.

Biocompatible Materials↗

PubMed2005

[Aggressive fibromatosis in the jaw and facial region with bone involvement. A review].

BACKGROUND: Aggressive fibromatosis (AF) involving bones of the head is rare and surgery is often complicated by a high recurrence rate. Interdisciplinary treatment is of the utmost importance to avoid extensive, mutilating resection. Two cases emphasize the difficulties in the management. CASE REPORTS: A 67-year-old woman was referred to our unit with a blepharochalasis of the left upper palpebra and a palsy of the face on the left side. Her medical history included 12 operations over the previous 4 years for an extensive AF. MATERIAL AND METHODS: Our review includes all case reports of AF involving bones of the head published between 1960 and 2004. Additionally, our two cases are presented. Signs, symptoms and outcome were analyzed in relation to different treatment options. CONCLUSION: According to the literature, surgery is the most common treatment for AF in the head and neck region. Alternative modes of therapy must be considered because of the high recurrence rate and to avoid mutilating operations.

Aged↗

PubMed2004

[Peri-implant bone formation around cylindrical and conical implant systems].

BACKGROUND: The treatment of patients with early or immediately loaded dental implants has renewed interest in the behavior of osseointegration at the implant surface. Whereas it is generally accepted that peri-implant tissue formation and mineralization are dependent on the local mechanical environment in the interface zone, controversies exist concerning the impact of implant design on peri-implant bone formation. The aim of the present study was the in vivo evaluation of peri-implant bone formation by two different implant systems: cylindrical (ITI) versus conical (ILI). MATERIAL AND METHOD: A total of 60 implants (30 ITI and 30 ILI) were placed in the cranial and caudal part of the tibia of eight Göttinger minipigs. Half of the minipigs were sacrificed at 7 days and 28 days of osseointegration. Implant-containing bone specimens were prepared for histological and ultrastructural investigations. RESULTS: Histological and scanning electron-microscopic investigations showed a direct contact of bone-like minerals over the whole implant surface from day 7 of implant/bone interaction. Whereas the ILI implant showed direct contact up to the top of the crestal bone, ITI implants demonstrated a crestally located narrow gap without ossification over the whole experimental period. CONCLUSION: Our investigations support the hypothesis of an implant design-inherent emergence and maintenance of crestal bone.

Animals↗

PubMed2003

[Primary implant stability with different bone surgery techniques. An in vitro study of the mandible of the minipig].

The treatment concept of osseointegration is based on a stable embodiment of implants in bone and the maintenance of stability during functional load. A goal of the surgical preparation technique is therefore to obtain a stable and firm implant anchorage. The aim of this study was to evaluate implant stability after different surgical treatment of the bony implantation bed. Thirty cylindrical solid-screw-shaped implants with standard SLA ITI configuration were implanted into the explanted mandibles of five minipigs. The implant sites were prepared either by a conventional burr technique (group A), by burr technique with additional thread cutting (group B), or by the osteotome technique (group C). Primary implant stability was evaluated by resonance frequency analysis and removal torque test. The average value of the resonance frequency analysis (RFA) was 6000+/-469 cycles/s in group A, 5700+/-557 cycles/s in group B, and 5540+/-527 cycles/s in group C. Removal torque values of group A (507+/-57 Nmm) were significantly higher than those of group B (466+/-45 Nmm) and group C (240+/-31 Nmm) (between group A and C p<0.05, group A to B p=0.39, and B to C p<0.05). It can be concluded from this study that the conventional burr technique achieves a statistically significantly better primary bone anchorage than the osteotome technique.

Animals↗

PubMed2003

[Odontogenic foci--possible etiology of urticaria?].

Recent studies have shown that chronic odontogenic infections could pose a risk for myocardial infarction, cerebral ischemia, and arteriosclerosis. However, the correlation between urticaria and dental infections has rarely been examined so far. Therefore, we performed a case-control study using a standardized questionnaire and examination. We investigated 66 patients suffering from an acute or chronic urticaria and 65 age- and sex-matched healthy patients as a control group. Dental status was determined by a so-called total dental index (TDI) which primarily reflects caries, periodontitis, periapical lesions, and nonvital and missing teeth. All 66 patients were referred from the department of dermatology. After their treatment in hospital, all patients received a questionnaire with questions on intensity and localization of the urticaria. The TDI of the urticaria patients was slightly better ( n=66; 2.6+/-1.98) than that of the control group ( n=65, TDI=3.3+/-1.86). Subsequently, it was determined if the urticaria had receded after dental treatment. In conclusion, chronic dental infections do not seem to correlate with an increased risk for urticaria.

Adult↗