Biomedical subjects
Publications and source records attributed to A Barrero.
This study shows that conducting liquids can be electrosprayed in steady cone-jet mode inside liquid insulator baths. Experimental results show that the current emitted from the meniscus fits well the scaling laws given in the literature for electrosprays in air at atmospheric pressure or vacuum. The technique may be of interest in obtaining fine liquid-liquid emulsions of uniformly sized droplets in the nanometric range.
Water solutions with electrical conductivities ranging from that of the deionized water up to 2 S/m have been electrosprayed in air through narrow silica tubes. Results show unambiguously that steady cone jets of water in air without the assistance of glow discharge can be formed for the range of electrical conductivities we have explored. The absence of corona discharge has been proven not only for the good agreement between the experimental results and the scaling laws given in the cone-jet literature but also for the independence of the spray current on the atmosphere (air or CO(2)) in which water was being electrosprayed. Other regimes such as the electric dripping and the assisted glow discharge cone-jet mode that appear in the electrospraying of water in air at room temperature have also been investigated.
The mechanism of appearance of swirl in a certain class of converging flows is investigated numerically. The analysis is motivated by the spontaneous generation of swirl, which has been observed in electrified menisci (Taylor cones). The electrical stress acting on the cone surface drives these electrified millimetric fluid flows. Numerical results show that the primarily swirl-free meridian flow is unstable within an interval of values of the Reynolds number based on the surface stress. For values of the Reynolds number outside this interval, which depends on the forcing conditions and the geometry of the flow, the nonswirling meridian flow is stable. The instability mechanism of circulation amplification, which has nothing to do with the well-known increase of swirl velocity due to the vortex stretching mechanism, is due to a convection-diffusion effect. The circulation accumulated at the axis zone by the converging meridian motion is pumped by diffusion toward the conical surface. This feedback loop mechanism shoots the circulation amplification for values of the Reynolds number larger than a critical one. The same instability mechanism of swirl amplification could also appear in other converging flows generated by body forces (natural convection, electrical forces, etc.).
We report a method to generate steady coaxial jets of immiscible liquids with diameters in the range of micrometer/nanometer size. This compound jet is generated by the action of electro-hydrodynamic (EHD) forces with a diameter that ranges from tens of nanometers to tens of micrometers. The eventual jet breakup results in an aerosol of monodisperse compound droplets with the outer liquid surrounding or encapsulating the inner one. Following this approach, we have produced monodisperse capsules with diameters varying between 10 and 0.15 micrometers, depending on the running parameters.
Explore the source record for details and available documents.