PubMed Health⌕ Search

Biomedical subjects

A C Courtney

Publications and source records attributed to A C Courtney.

7 recordsLinked to original sources

An extensometer for global measurement of bone strain suitable for use in vivo in humans.

An axial extensometer able to measure global bone strain magnitudes and rates encountered during physiological activity, and suitable for use in vivo in human subjects, is described. The extensometer uses paired capacitive sensors mounted to intraosseus pins and allows measurement of strain due to bending in the plane of the extensometer as well as uniaxial compression or tension. Data are presented for validation of the device against a surface-mounted strain gage in an acrylic specimen under dynamic four-point bending, with square wave and sinusoidal loading inputs up to 1500 mu epsilon and 20 Hz, representative of physiological strain magnitudes and frequencies. Pearson's correlation coefficient (r) between extensometer and strain gage ranged from 0.960 to 0.999. Mean differences between extensometer and strain gage ranged up to 15.3 mu epsilon. Errors in the extensometer output were directly proportional to the degree of bending that occurs in the specimen, however, these errors were predictable and less than 1 mu epsilon for the loading regime studied. The device is capable of tracking strain rates in excess of 90,000 mu epsilon/s.

Bone and Bones↗

Effects of age, density, and geometry on the bending strength of human metatarsals.

In this basic study, we investigated the relative roles of donor age, bone density, and bone geometry in determining structural strength of human metatarsals tested in a four-point bending configuration. Density measurements were made noninvasively using dual energy X-ray absorptiometry, and geometric measurements were made by digitally imaging cross-sections of specimens. Correlations between area bone mineral density and metatarsal strength were strong (r2 = 0.83, 0.81 for second and third metatarsals, respectively) and were not improved by including cross-sectional area or minimum moment of inertia in multiple regression analyses. Increased donor age was associated with decreased bending strength (r2 = 0.51 and 0.45, respectively), which was expected because increased age correlated significantly with decreased bone density (r2 = 0.69 and 0.80, respectively). These results indicate that the strength of human metatarsals generally decreases with age and that this decrease is likely attributable to decreased bone density. Moreover, the results indicate that noninvasive dual energy x-ray absorptiometry measurements of metatarsal density are useful for assessing metatarsal strength and that additional measurements of bone geometry are not required.

Absorptiometry, Photon↗

Age-related differences in post-yield damage in human cortical bone. Experiment and model.

Very few quantitative comparisons between mechanical test behavior of cortical bone and microscopic evidence of damage have been reported. In this study, the hypothesis that age-related degradation of mechanical properties in human cortical bone is associated with increases in damage in the form of microcracks was investigated. The initial modulus and yield stress were 6% (not significant) and 10% (p = 0.05) lower, respectively, in specimens from elderly femora than in specimens from young adult femora. However, both groups showed a 34% decrease in modulus after being loaded to 1% strain. Microcracks were observed in cement lines and between lamellae and were parallel to the loading direction. There were 50% more cracks in longitudinal sections of tested specimens than in controls from elderly femora; however, there were no more cracks in tested specimens than in controls from young adult femora. In addition, there were twice as many cracks in controls and three times as many cracks in tested specimens from elderly femora than in those from young adult femora (p < 0.01). A microstructurally based model was developed which supported the mechanical test results and indicated that damage began to develop at about 1500 mu epsilon. The results suggest that older bone may have reduced mechanical properties due to the presence of more microcracks, and that older bone is more susceptible to developing microcracks at a given strain level. However, the mechanical test data indicate that specimens from young adult femora also sustained some king of damage as a result of mechanical loading, which requires further investigation.

Adult↗

Etiology and prevention of age-related hip fractures.

Falls and fall-related injuries are among the most serious and common medical problems experienced by the elderly. Hip fracture, one of the most severe consequences of falling in the elderly, occurs in only about 1% of falls. Despite this, hip fracture accounts for a large share of the disability, death, and medical costs associated with falls. As measured by their frequency, influence on quality of life, and economic cost, hip fractures are a public health problem of crisis proportions. Without successful international initiatives aimed at reducing the incidence of falls and hip fractures, the implications for allocations of health resources in this and the next century are staggering. Identifying those at risk for harmful falls requires an understanding of what kinds of falls result in injury and fracture. In elderly persons who fall, in most of whom hip bone mineral density is already several standard deviations below peak values, fall severity (as reflected in falling to the side and impacting the hip) and body habitus are important risk factors for hip fracture and touch on a domain of risk entirely missed by knowledge of bone mineral density. These findings clearly suggest that factors related to both loading and bone fragility play important roles in the etiology of hip fracture. We provide a strategy, based on engineering approaches to fracture risk prediction, for determining the relative etiologic importance of loading and bone fragility and to summarize some of what is known about both sets of factors. We define a factor of risk, phi, as the ratio of the loads applied to the hip divided by the loads necessary to cause fracture and summarize available data on the numerator and the denominator of phi. We then provide an overview of the complex interplay between the risks associated with the initiation, descent, and impact phases of a fall, thereby suggesting an organized approach for evaluating intervention efforts being used to prevent hip fractures. The findings emphasize the continuing need for combined intervention strategies that focus on fall prevention, reductions in fall severity, and maintaining or increasing femoral bone mass and strength, either through targeted exercise programs, optimal nutrition (Ca, Vitamin D), and/or in the use of osteodynamic agents. By developing and refining the factor of risk, a property that captures both the contributions of bone density and the confounding influences of body habitus and fall severity, we believe these intervention strategies can be targeted more appropriately.

Accidental Falls↗

Ultrasound and densitometry of the calcaneus correlate with the failure loads of cadaveric femurs.

We assessed the bone mineral density (BMD) of 16 matched sets of cadaveric proximal femurs and feet using dual-energy x-ray absorptiometry (DXA). We also estimated the femoral neck length from the DXA scans. Quantitative ultrasound densitometry was used to measure the velocity of sound and broadband ultrasound attenuation (BUA) in the calcaneus of each foot. The proximal femurs were then tested to failure in a loading configuration designed to simulate a fall with impact to the greater trochanter. Femoral neck BMD and trochanteric BMD were strongly associated with the femoral failure load (r2 = 0.79 and 0.81, respectively; P < 0.001), whereas femoral neck length was modestly correlated with femoral failure load (r2 = 0.27, P = 0.04). Calcaneal BMD (r2 = 0.63, P < 0.001) and BUA (r2 = 0.51, P = 0.002) were also significantly associated with femoral failure load. Given the small sample size, we were unable to detect differences in the strength of the correlations between the independent parameters and femoral failure load. Using linear multiple regression analyses, the strongest predictor of femoral failure load was a combination of femoral neck BMD and femoral neck length (R2 = 0.85, P < 0.001). Thus, it appears that both femoral and calcaneal bone mineral properties may be useful for identifying those persons at greatest risk for hip fracture.

Absorptiometry, Photon↗

Age-related reductions in the strength of the femur tested in a fall-loading configuration.

UNLABELLED: To assess age-related changes in femoral strength as a component in the risk of fracture of the hip, we compared the loads at fracture of the proximal aspects of femora from the cadavera of older and younger individuals, as tested in a fall-loading configuration. To provide a basis for non-invasive in vivo estimates of femoral strength, we also determined the correlations between variables measured with dual-energy x-ray absorptiometry and these loads. Femora from the cadavera of eight older individuals (mean age, seventy-four years) and nine younger individuals (mean age, thirty-three years) were scanned with a Hologic QDR-2000 densitometer to obtain densitometric and geometric information. The femora were then tested mechanically in a loading configuration that simulated a fall on the greater trochanter. The femora from the older group were half as strong as those from the younger group (p < 0.001), and they absorbed one-third as much energy (p < 0.001). The area bone-mineral density of the femoral neck correlated strongly with the load at fracture (r2 = 0.92). CLINICAL RELEVANCE: The prevalence of fracture of the hip increases exponentially with age. 90 percent of those fractures are the result of a simple fall from a standing height.(ABSTRACT TRUNCATED AT 250 WORDS)

Absorptiometry, Photon↗

Effects of loading rate on strength of the proximal femur.

Results from previous quasi-static mechanical tests indicate that femurs from elderly subjects fail in vitro at forces 50% below those available in a fall from standing height. However, bone is a rate-dependent material, and it is not known whether this imbalance is present at rates of loading which occur in a fall. Based on recent data on time to peak force and body positions at impact during simulated falls, we designed a high rate test of the femur in a loading configuration meant to represent a fall on the hip. We used elderly (mean age 73.5 +/- 7.4 (SD) years) and younger adult (32.7 +/- 12.8 years) cadaveric femurs to investigate whether (1) the strength, stiffness, and energy absorption capacity of the femur increases under high rate loading conditions; (2) elderly femurs have reduced strength, stiffness, and energy absorption capacity compared with younger adult femurs at this loading rate; and (3) densitometric and geometric measures taken at the hip correlate with the measured fracture loads. Femurs were scanned using dual-energy X-ray absorptiometry (DXA) and then tested to failure in a fall loading configuration at a displacement rate of 100 mm/second. The fracture load in elderly and younger adult femurs increased by about 20% with a 50-fold increase in displacement rate. However, energy absorption did not increase with displacement rate because of a twofold increase in stiffness at the higher loading rate.(ABSTRACT TRUNCATED AT 250 WORDS)

Absorptiometry, Photon↗