PubMed HealthSearch

Biomedical subjects

A Chrambach

Publications and source records attributed to A Chrambach.

At least 19 recordsLinked to original sources

DNA electrophoresis in uncross-linked polyacrylamide solution, studied by epifluorescence microscopy.

Electrophoresis of human DNA fragments (approximately 1 x 10(5) to 1 x 10(7) bases in size) was conducted in a solution of uncross-linked polyacrylamide contained in a horizontally mounted 1 mm diameter glass tube and monitored by epifluorescence microscopy. In presence of the polymer, molecular conformations described as a "trailing network" of DNA and a globular "head" were observed. The migration velocity varies between species differing in the size of the "head", and in the ratio between the size of the "head" and that of the trailing "network". By contrast, in pure buffer, lambda phage DNA migrates in a globular form at a mobility consistent with known macroscopic data. When electrophoresis in the polymer solution of an agarose plug preparation of Schizosaccharomyces pombe DNA was carried out after melting at 70 degrees C, a migrating DNA-agarose complex was observed. The complex was not fully dissociated by an agarose-hydrolyzing enzyme (Gelase).

Breast Neoplasms

Resolution of circular, nicked circular and linear DNA, 4.4 kb in length, by electrophoresis in polyacrylamide solutions.

Circular DNA of more than 1,400 bp in size is known not to migrate into polyacrylamide gels. The migration of supercoiled plasmid pBR322 DNA (4,363 by) into uncrosslinked polyacrylamide (Mw 5 x 10(6)) solutions and its separation, on the basis of conformation, from its nicked form is demonstrated in this study. Migration of the supercoiled, nicked circular and linear forms of the plasmid DNA is retarded in proportion to the concentration of uncrosslinked polyacrylamide, the degree of retardation being highest for the nicked circular form. Decreasing the level of supercoiling of the covalently closed circular form by decreasing the concentration of the intercalating dye (ethidium homodimer) shows that the degree of retardation decreases in proportion to the superhelix density.

DNA, Bacterial

Concave Ferguson plots of DNA fragments and convex Ferguson plots of bacteriophages: evaluation of molecular and fiber properties, using desktop computers.

A desktop computer program evaluating physical properties of DNA and bacteriophages is presented. The analysis is based on data obtained from capillary and submarine-type agarose electrophoresis. Native molecular/particle properties and properties of the gel (or polymer) medium can be derived from electrophoresis at several gel concentrations. This is done conveniently by a computerized evaluation of the semi-logarithmic plot of mobility vs. gel concentration, designated the Ferguson plot. In application to most proteins, this plot is linear and computer programs exist to evaluate it. However, nonlinear Ferguson plots have assumed great importance in view of the fact that the plots are concave for DNA. Similarly, convex plots are important since they prevail in the electrophoresis of large particles in agarose. The computer program reported here is the first to (i) address concave Ferguson plots and (ii) allow for the evaluation of both cases using a desktop computer. Program ELPHOFIT version 2.0, a Macintosh application, is available upon request.

Bacteriophages

Distinction between supercoiled and linear DNA in transverse agarose pore gradient gel electrophoresis.

Four species of linear DNA and the first four members of a linking series, generated by treatment of plasmid DNA (PUC19, 2.7 kb) with mitochondrial topoisomerase I, were differentiated by transverse agarose pore gradient gel electrophoresis. The experimental curves of migration distance vs. agarose concentration (Ferguson curves) of supercoiled DNA exhibit a steeper trajectory than those of linear DNA of the same size range. As a consequence, the four supercoiled species exhibit an increase in apparent size (relative to linear DNA standards) with increasing agarose concentration. Both the crossing of the Ferguson curves with those of linear standards as well as the apparent size increase with agarose concentration can serve to detect supercoiled plasmid-sized DNA in mixtures with linear DNA.

DNA

Computer-aided analysis of DNA curves on transverse gradient gels.

Transverse pore gradient polyacrylamide gel electrophoresis of DNA restriction fragments was used to generate gel patterns describing migration distance as a function of gel concentration (Ferguson curves). These Ferguson curves were digitized, traced and analyzed with the aid of a personal computer. The traced curves were plotted semi-logarithmically and the plots were subjected to least-squares linear regression analysis to yield values of the slope (KR) and the intercept at %T = 0 (YO). These values are highly precise since they are based on approx. 100 measurements per curve. The computerized method reduces the errors due to manual measurements of migration distances and is time and labor saving. The method is still limited to intra-experimental comparison of Ferguson curves, since it does not as yet comprise a determination of gel concentration. At present, curve tracing remains semi-automated, requiring manual intervention when Ferguson curves cross or approach one another. Potentially, the importance of the computerized analysis of transverse pore gradient gels lies in the rapid quantitative interpretation of Ferguson curves for detection of anomalously migrating DNA species. Potentially, that application provides a more sensitive and informative mode of detection than either the mere visual observation of crossing Ferguson curves or of a shift in mobility at a single gel concentration.

Buffers

Transverse agarose pore gradient gel electrophoresis of DNA.

Transverse agarose pore gradient gels were prepared on GelBond in the concentration range of nominally 0.2-1.5% SeaKem GTG agarose, using density stabilization by glycerol and incorporation of a dye to define the gel concentration at each point on the pore gradient gel. The distribution of the dye was evaluated by photography, video-acquisition and digitization of the gradient mixture and by densitometry of the gel. The gel was applied to the electrophoresis of a 1-kb standard ladder of DNA fragments, using standard submarine apparatus. The method extends to agarose gel electrophoresis the benefits of semi-automated analysis of 'Ferguson curves' described in application to polyacrylamide gel by Wheeler et al. (J. Biochem. Biophys. Methods 24, 171-180).

Coloring Agents

Information on DNA conformation derived from the Ferguson plot of DNA fragments of up to 9 kb in size, using polyacrylamide gel electrophoresis in a discontinuous buffer system.

The Ferguson plot in polyacrylamide gel electrophoresis (PAGE)(15%CDATD, moving boundary electrophoresis buffer system operative at pH 8.9, 4 degrees C, 8 mA/cm2 of gel) of DNA fragments up to 9.4 kb in size was found to exhibit a linear segment at polyacrylamide concentrations starting at 3% T and undergoing a gradual transition into a concave segment at higher gel concentrations, confirming previous findings by Stellwagen. The larger the DNA, and the higher the gel concentration, the less extended the linear and the more extended the concave segment of the plot. The lowest % T of the linear range for DNA in polyacrylamide remains unknown since mobilities at nongelling concentrations below 3% T have not as yet been measured. As previously suggested, the transition from the linear to the concave segment corresponds to that from the randomly oriented DNA to the anisotropically stretched, "reptating" DNA. For a DNA of 9.4 kb in size, the end of the linear range of the Ferguson plot can be extended from 3.5 to 5% T when 15% DATD rather than 2.5% Bis is used to crosslink the polyacrylamide. Increasing the temperature of PAGE from 4 degrees C to 25 and 50 degrees C widens the linear segment progressively, indicating an increasingly random orientation with rising temperature. When current density is increased from 8 to 40 mA/cm2, the concave curvature of the Ferguson plot of DNA 1 to 9.4 kb in size decreases, suggesting a transition from a "reptating" to a randomly distributed molecule, due to increased Joule heat.(ABSTRACT TRUNCATED AT 250 WORDS)

Buffers

Electrophoretic size separations in liquified agarose of polystyrene particles and circular DNA.

Polystyrene sulfate particles of 0.37 to 1.78 mu in diameter are retarded in their electrophoretic migration in proportion to the concentration of agarose liquified above its gelling temperature. In the concentration range of 0.02 to 0.2% liquified agarose, the degree of this retardation in electrophoresis at 40 degrees C is inversely related to particle size. By contrast, mitochondrial DNA (16 kb), plasmid pBR322 DNA (4 kb) and plasmid PSA509 DNA (3 kb) exhibit under the same conditions a degree of retardation which is proportional to their size. This confirms the existence of two divergent mechanisms of size separation similarly observed in other liquid polymer media, i.e. one based on collisions with the gel fiber (molecular sieving) and one based on exclusion from the fiber network (the electrophoretic equivalent of gel permeation).

DNA, Circular

Electrophoresis with intermittent scanning of the migration path: detection of resolution within shortened time.

Intermittent optical scanning (by detection of optical density or fluorescence) of the electrophoretic migration path was applied to the resolution of two dyes under an arbitrary set of conditions. Scanning at 5-min intervals allows for detection of resolution between the two zones at least 3 times faster than conventional automatic zone detection employing a detector at the end of the migration path. This result promises that replacing stationary by mobile detectors in general would result in a substantial time saving for automated detection of electrophoretic zones.

Densitometry

Disaggregation of adenylate cyclase during polyacrylamide-gel electrophoresis in mixtures of ionic and non-ionic detergents.

1. Adenylate cyclase [ATP pyrophosphate-lyase (cyclizing), EC 4.6.1.1] solubilized from the rat liver plasma membrane with 1% Lubrol PX and partially purified by gel filtration in buffer containing 0.01% Lubrol PX was physically characterized by polyacrylamide-gel electrophoresis. 2. The molecular radius determined for the partially purified enzyme was 4.9nm, compared with the value of 3.9nm obtained for the enzyme before gel filtration. 3. This difference, representing an approximate doubling of the molecular volume of the enzyme, implied that aggregation with itself or other proteins had occurred during partial purification. 4. Aggregation was not reversed by electrophoresis in the presence of high Lubrol concentrations. 5. Substitution of deoxycholate or N-dodecylsarcosinate for Lubrol PX either for solubilization or during electrophoresis led to poorer resolution of membrane proteins at concentrations giving greater than 70% loss of enzyme activity. 6. Partially purified adenylate cyclase was electrophoresed in the presence of mixed micelles of Lubrol PX and deoxycholate or Lubrol PX and N-dodecylsarcosinate. Different mixtures were examined simultaneously in a suitable apparatus. 7. Electrophoresis in the presence of 0.1% Lubrol plus 0.03% deoxycholate decreased the molecular radius of the cyclase to 4.0nm, with greater than 90% recovery of enzymic activity. The net charge of the enzyme was also increased, indicating ionic detergent binding. 8. With 0.1% Lubrol plus 0.03% N-dodecylsarcosinate the molecular radius was 4.3nm, recovery approx. 50% and net charge similar to that seen in Lubrol plus deoxycholate. 9. The resolution of cyclase from bulk protein, on an analytical scale, was improved in the presence of detergent mixtures, as compared with resolution in Lubrol alone. 10. The results demonstrate the usefulness of polyacrylamide-gel electrophoresis to detect and overcome aggregation problems with membrane proteins and suggest that detergent mixtures in specific ratios may be useful in the purification of adenylate cyclase and other intrinsic membrane proteins.

Adenylyl Cyclases

Estimation of polymerization efficiency in the formation of polyacrylamide gel, using continuous optical scanning during polymerization.

The Ferguson plot and 'quantitative' gel electrophoresis (based on the Ferguson plot) depend on a knowledge of accurate gel concentrations. The easiest way to estimate accuracy of gel concentrations, in terms of the degree of completion of the polymerization reaction which gives rise to a gel, is by spectrophometry. Making use of the apparatus for continuous optical scanning of polyacrylamide gels, the extent and rate of polymerization of cross-linked polyacrylamide were estimated by measuring the absorbance at 275 nm of the reaction mixture subsequent to free radical initiation of polymerization. Under appropriate conditions of monomer concentration, initiator levels and temperature, absorbance decreased monotonically after a lag period of 10 min, and after 20--30 min of reaction the absorbance reached a plateau value which provided a measure of polymerization efficiency. Application of a standard curve of absorbance vs. monomer concentration allowed one to quantitate concentrations of residual monomer throughout the course of polymerization. Under a set of arbitrary polymerization conditions (e.g. 6--20% total gel concentration), the reaction went to 63--96% completion. The rate of polymerization was approximately proportional to the square of the monomer concentration (2nd-order reaction kinetics). Absorbance decrease subsequent to the initiation of the polymerization reaction appeared suitable as a measure of efficiency of polymerization since: (a) absorbance spectra of monomers at 0.5 %T and residual monomers in a 10 %T gel, at a time when polymerization seemed terminated, coincided; (b) values of residual monomer obtained were reasonable (10--30%); (c) bimolecular reaction kinetics were found, in agreement with expectation; and (d) absorbance of incomplete polymerization mixtures, deficient in either initiators or monomers, was constant with time.

Acrylamides

A three-step method for isolating a few to several hundred milligrams of protein.

An operationally simple general protein isolation method was devised from three previously available separation tools, and was tested by application to two demanding fractionation problems and for yield. One test system was the isolation by gel electrofocusing of two model proteins with pI values of 4.6 and 4.8, bovine serum albumin and ovalbumin, with a load of 220 mg each. The other test was the isolation of 10 mg of human growth hormone isohormone B from a mixture of closely migrating other isohormones. The three-step procedure comprises of: (1) separation into zones of homogeneous protein by gel electrofocusing; (2) excision of the zones of homogeneous protein from the gel followed by concentration of the protein to a small volume of solution by means of Steady-State Stacking; (3) purification from polyacrylamide-like contaminants and non-volatile buffers by gel filtration followed by lyophilization. The average overall recovery was 70--80%.

Electrophoresis, Polyacrylamide Gel