Biomedical subjects

A J Koster

Publications and source records attributed to A J Koster.

At least 19 recordsLinked to original sources

PubMed2003

Endosomal compartmentalization in three dimensions: implications for membrane fusion.

Endosomes are major sorting stations in the endocytic route that send proteins and lipids to multiple destinations in the cell, including the cell surface, Golgi complex, and lysosomes. They have an intricate architecture of internal membrane structures enclosed by an outer membrane. Recycling proteins remain on the outer membrane, whereas proteins that are destined for degradation in the lysosome are sorted to the interior. Recently, a retrograde pathway was discovered whereby molecules, like MHC class II of the immune system, return from the internal structures to the outer membrane, allowing their further transport to the cell surface for T cell activation. Whether this return involves back fusion of free vesicles with the outer membrane, or occurs via the continuity of the two membrane domains, is an unanswered question. By electron tomography of cryo-immobilized cells we now demonstrate that, in multivesicular endosomes of B-lymphocytes and dendritic cells, the inner membranes are free vesicles. Hence, protein transport from inner to outer membranes cannot occur laterally in the plane of the membrane, but requires fusion between the two membrane domains. This implies the existence of an intracellular machinery that mediates fusion between the exoplasmic leaflets of the membranes involved, which is opposite to regular intracellular fusion between cytoplasmic leaflets. In addition, our 3D reconstructions reveal the presence of clathrin-coated areas at the cytoplasmic face of the outer membrane, known to participate in protein sorting to the endosomal interior. Interestingly, profiles reminiscent of inward budding vesicles were often in close proximity to the coats.

Animals↗

PubMed2003

Correction of autofocusing errors due to specimen tilt for automated electron tomography.

Transmission electron microscopy images acquired under tilted-beam conditions experience an image shift as a function of defocus settings - a fact that is exploited as a method for defocus determination in most of the automated tomography data collection systems. Although the method was shown to be highly accurate for a large variety of specimens, we point out that in its original design it can strictly only be applied to images of untilted samples. The application to tilted samples and thus in automated electron tomography is impaired mainly due to a defocus change across the images, resulting in reduced accuracy. In this communication we present a method that can be used to improve the accuracy of the basic autofocusing procedures currently used in systems for automated electron tomography.

Animals↗

PubMed2003

Influence of aldehyde fixation on the morphology of endosomes and lysosomes: quantitative analysis and electron tomography.

Cryoimmobilization is regarded as the most reliable method to preserve cellular ultrastructure for electron microscopic analysis, because it is both fast (milliseconds) and avoids the use of harmful chemicals on living cells. For immunolabelling studies samples have to be dehydrated by freeze-substitution and embedded in a resin. Strangely, although most of the lipids are maintained, intracellular membranes such as endoplasmic reticulum, Golgi and mitochondrial membranes are often poorly contrasted and hardly visible. By contrast, Tokuyasu cryosectioning, based on chemical fixation with aldehydes is the best established and generally most efficient method for localization of proteins by immunogold labelling. Despite the invasive character of the aldehyde fixation, the Tokuyasu method yields a reasonably good ultrastructural preservation in combination with excellent membrane contrast. In some cases, however, dramatic differences in cellular ultrastructure, especially of membranous structures, could be revealed by comparison of the chemical with the cryofixation method. To make use of the advantages of the two different approaches a more general and quantitative knowledge of the influence of aldehyde fixation on ultrastructure is needed. Therefore, we have measured the size and shape of endosomes and lysosomes in high-pressure frozen and aldehyde-fixed cells and found that aldehyde fixation causes a significant deformation and reduction of endosomal volume without affecting the membrane length. There was no considerable influence on the lysosomes. Ultrastructural changes caused by aldehyde fixation are most dramatic for endosomes with tubular extensions, as could be visualized with electron tomography. The implications for the interpretation of immunogold localization studies on chemically fixed cells are discussed.

Aldehydes↗

PubMed2002

Automated high-throughput electron tomography by pre-calibration of image shifts.

Electron tomography is a versatile method for obtaining three-dimensional (3D) images with transmission electron microscopy. The technique is suitable to investigate cell organelles and tissue sections (100-500 nm thick) with 4-20 nm resolution. 3D reconstructions are obtained by processing a series of images acquired with the samples tilted over different angles. While tilting the sample, image shifts and defocus changes of several microm can occur. The current generation of automated acquisition software detects and corrects for these changes with a procedure that incorporates switching the electron optical magnification. We developed a novel method for data collection based on the measurement of shifts prior to data acquisition, which results in a five-fold increase in speed, enabling the acquisition of 151 images in less than 20 min. The method will enhance the quality of a tilt series by minimizing the amount of required focus-change compensation by aligning the optical axis to the tilt axis of the specimen stage. The alignment is achieved by invoking an amount of image shift as deduced from the mathematical model describing the effect of specimen tilt. As examples for application in biological and materials sciences 3D reconstructions of a mitochondrion and a zeolite crystal are presented.

Animals↗

PubMed2001

Small cargo proteins and large aggregates can traverse the Golgi by a common mechanism without leaving the lumen of cisternae.

Procollagen (PC)-I aggregates transit through the Golgi complex without leaving the lumen of Golgi cisternae. Based on this evidence, we have proposed that PC-I is transported across the Golgi stacks by the cisternal maturation process. However, most secretory cargoes are small, freely diffusing proteins, thus raising the issue whether they move by a transport mechanism different than that used by PC-I. To address this question we have developed procedures to compare the transport of a small protein, the G protein of the vesicular stomatitis virus (VSVG), with that of the much larger PC-I aggregates in the same cell. Transport was followed using a combination of video and EM, providing high resolution in time and space. Our results reveal that PC-I aggregates and VSVG move synchronously through the Golgi at indistinguishable rapid rates. Additionally, not only PC-I aggregates (as confirmed by ultrarapid cryofixation), but also VSVG, can traverse the stack without leaving the cisternal lumen and without entering Golgi vesicles in functionally relevant amounts. Our findings indicate that a common mechanism independent of anterograde dissociative carriers is responsible for the traffic of small and large secretory cargo across the Golgi stack.

Animals↗

PubMed2001

Corneal collagen fibril structure in three dimensions: Structural insights into fibril assembly, mechanical properties, and tissue organization.

The ability of the cornea to transmit light while being mechanically resilient is directly attributable to the formation of an extracellular matrix containing orthogonal sheets of collagen fibrils. The detailed structure of the fibrils and how this structure underpins the mechanical properties and organization of the cornea is understood poorly. In this study, we used automated electron tomography to study the three-dimensional organization of molecules in corneal collagen fibrils. The reconstructions show that the collagen molecules in the 36-nm diameter collagen fibrils are organized into microfibrils (approximately 4-nm diameter) that are tilted by approximately 15 degrees to the fibril long axis in a right-handed helix. An unexpected finding was that the microfibrils exhibit a constant-tilt angle independent of radial position within the fibril. This feature suggests that microfibrils in concentric layers are not always parallel to each other and cannot retain the same neighbors between layers. Analysis of the lateral structure shows that the microfibrils exhibit regions of order and disorder within the 67-nm axial repeat of collagen fibrils. Furthermore, the microfibrils are ordered at three specific regions of the axial repeat of collagen fibrils that correspond to the N- and C-telopeptides and the d-band of the gap zone. The reconstructions also show macromolecules binding to the fibril surface at sites that correspond precisely to where the microfibrils are most orderly.

Animals↗

PubMed2001

The supramolecular organization of fibrillin-rich microfibrils.

We propose a new model for the alignment of fibrillin molecules within fibrillin microfibrils. Automated electron tomography was used to generate three-dimensional microfibril reconstructions to 18.6-A resolution, which revealed many new organizational details of untensioned microfibrils, including heart-shaped beads from which two arms emerge, and interbead diameter variation. Antibody epitope mapping of untensioned microfibrils revealed the juxtaposition of epitopes at the COOH terminus and near the proline-rich region, and of two internal epitopes that would be 42-nm apart in unfolded molecules, which infers intramolecular folding. Colloidal gold binds microfibrils in the absence of antibody. Comparison of colloidal gold and antibody binding sites in untensioned microfibrils and those extended in vitro, and immunofluorescence studies of fibrillin deposition in cell layers, indicate conformation changes and intramolecular folding. Mass mapping shows that, in solution, microfibrils with periodicities of <70 and >140 nm are stable, but periodicities of approximately 100 nm are rare. Microfibrils comprise two in-register filaments with a longitudinal symmetry axis, with eight fibrillin molecules in cross section. We present a model of fibrillin alignment that fits all the data and indicates that microfibril extensibility follows conformation-dependent maturation from an initial head-to-tail alignment to a stable approximately one-third staggered arrangement.

Amino Acid Sequence↗

PubMed2000

Automated electron tomography of the septal pore cap in Rhizoctonia solani.

Dolipore septa and septal pore caps (SPCs) in filamentous basidiomycetes may play an important role in maintaining the integrity of hyphal cells. We have investigated the ultrastructure of the dolipore septum and the SPC in Rhizoctonia solani hyphal cells after high-pressure freezing, freeze substitution, and Spurr embedding. We visualized the SPC with associated cell ultrastructures in three dimensions by automated electron tomography of thick-sectioned cells, followed by 3D tomographic reconstructions. Using these methods we were able to document the passage of mitochondria through the SPC, small tubular membranous structures at the entrance of the septal pore channel, filamentous structures connecting the inner side of the SPC with pore-plugging material, thin filaments anchoring the pore-plugging material with the plasma membrane, small vesicles attached to the plugging material, and tubular endoplasmic reticulum continuous with the base of the SPC. We hypothesize that the SPC, the filamentous structures, the plugging material, and the endoplasmic reticulum act in a coordinated fashion to maintain cellular integrity, intercellular communication, and the transport of solutes and cell organelles in the filamentous fungus R. solani.

Automation↗

PubMed1999

The C-terminal domain of the Pseudomonas secretin XcpQ forms oligomeric rings with pore activity.

The Pseudomonas secretin XcpQ forms an oligomeric complex, which is involved in the translocation of proteins across the outer membrane via the type II secretion pathway. Pseudomonas aeruginosa produces only small amounts of this complex, 50 to 100 copies per bacterium, and overexpression is lethal to these cells. However, overexpression of Pseudomonas alcaligenes XcpQ could be achieved in the P. alcaligenes mutant strain 537. Protease protection experiments with P. alcaligenes XcpQ showed that the C-terminal domain of XcpQ, which is conserved in all the different members of the secretin family, is largely resistant to proteinase K. This protease-resistant fragment is embedded in the membrane and remains a stable complex, indicating that this domain is involved in complex formation. Both the intact and the protease-protected XcpQ complex showed a tendency to form two-dimensional crystal-like structures. Electron microscopic analysis of these structures showed that the overall oligomeric rings of the intact and of the protease-resistant complex are highly similar. The central cavity of the intact XcpQ complex contains structured mass. Both the intact and the protease-protected XcpQ complex showed pore-forming activity in planar lipid bilayers, consistent with their role as a translocation channel. However, the single-channel conductances observed were not uniform. Together, these results demonstrate that the C-terminal secretin homology domain of XcpQ is the structural domain that forms the channel through which macromolecules are being transported.

Bacterial Proteins↗

PubMed1999

Capsids of tricorn protease studied by electron cryomicroscopy.

Tricorn protease from the archaeon Thermoplasma acidophilum acts "downstream" of the proteasome; in conjunction with its aminopeptidase cofactors it converts peptides generated by the proteasome into free amino acids. The basic functional unit of Tricorn is a homohexamer of the 121-kDa subunit, 20 of which can assemble further to form an icosahedral capsid with a molecular mass of 14.6 MDa. We have used electron cryomicroscopy to determine the structure of the Tricorn capsids to a resolution of 1.3 nm.

Archaeal Proteins↗

PubMed1998

Nucleosomes, linker DNA, and linker histone form a unique structural motif that directs the higher-order folding and compaction of chromatin.

The compaction level of arrays of nucleosomes may be understood in terms of the balance between the self-repulsion of DNA (principally linker DNA) and countering factors including the ionic strength and composition of the medium, the highly basic N termini of the core histones, and linker histones. However, the structural principles that come into play during the transition from a loose chain of nucleosomes to a compact 30-nm chromatin fiber have been difficult to establish, and the arrangement of nucleosomes and linker DNA in condensed chromatin fibers has never been fully resolved. Based on images of the solution conformation of native chromatin and fully defined chromatin arrays obtained by electron cryomicroscopy, we report a linker histone-dependent architectural motif beyond the level of the nucleosome core particle that takes the form of a stem-like organization of the entering and exiting linker DNA segments. DNA completes approximately 1.7 turns on the histone octamer in the presence and absence of linker histone. When linker histone is present, the two linker DNA segments become juxtaposed approximately 8 nm from the nucleosome center and remain apposed for 3-5 nm before diverging. We propose that this stem motif directs the arrangement of nucleosomes and linker DNA within the chromatin fiber, establishing a unique three-dimensional zigzag folding pattern that is conserved during compaction. Such an arrangement with peripherally arranged nucleosomes and internal linker DNA segments is fully consistent with observations in intact nuclei and also allows dramatic changes in compaction level to occur without a concomitant change in topology.

Animals↗

PubMed1998

26S proteasome structure revealed by three-dimensional electron microscopy.

In 26S proteasomes, "19S cap complexes" associate with either one or both ends of the barrel-shaped 20S core complex. These regulatory complexes which comprise about 20 different subunits, including 6 ATPases of the AAA family, are thought to recognize ubiquitinated substrate proteins, to dissociate and unfold them before threading them into the 20S core where they are degraded. Here, we examine the structure of 26S proteasomes from Drosophila embryos and Xenopus oocytes by electron microscopy. Image analysis reveals a rather flexible linkage between the 19S caps and the 20S core, with a peculiar wagging-type movement of the caps relative to the core. At this stage of the analysis, it is not clear whether this movement is relevant in terms of function. Three-dimensional reconstructions, taking this into account, provide first insights into the remarkably complex structure of the 19S caps and allows us to put forward a composite model of the entire 26S complex.

Animals↗

PubMed1997

Three-dimensional image reconstruction of large nuclear RNP (lnRNP) particles by automated electron tomography.

Nuclear RNA transcripts of split genes and their splicing products, as well as the general population of nuclear polyadenylated RNA are packaged in multi-component large nuclear ribonucleoprotein (lnRNP) particles. These lnRNP particles, which sediment at the 200 S region in sucrose gradients, contain all U small nuclear RNPs required for precursor messenger RNA (pre-mRNA) splicing and several protein splicing factors, including U2AF and the SR proteins. Electron microscopy of lnRNP particles revealed a large compact structure of 50 nm in diameter. In this study we employed automated computed tomography from electron micrographs for the three-dimensional (3D) image reconstruction of individual lnRNP particles isolated from mammalian cells nuclei and negatively stained. For each particle, a tilt series of 71 images was collected by direct digital recording of the images on a CCD camera attached to a computer controlled TEM facility. The 3D image was reconstructed according to the back projection principle. For rendering, real time display and comparison of the reconstructed particles, interactive computer graphics was employed. The reconstructed 3D images show a compact structure composed of four major subunits connected to each other. Comparison of the reconstructed lnRNP particles revealed morphological similarity of the individual particles, as well as similarity among the sub-structures. Based on these observations we propose a model for the packaging of nuclear pre-mRNAs in lnRNP particles where each substructure represents a functional unit. This model is compatible with the requirements for alternative splicing in multi-intronic pre-mRNAs, and with the fact that the splicing of multi-intronic pre-mRNAs does not occur in a sequential manner.

Animals↗

PubMed1997

Automated electron microscope tomography of frozen-hydrated chromatin: the irregular three-dimensional zigzag architecture persists in compact, isolated fibers.

The potential of electron microscope tomography as a tool for obtaining three-dimensional (3D) information about large macromolecular assemblies is greatly extended by automation of data collection. With the implementation of automated control of tilting, focusing, and digital image recording described here, tilt series of frozen-hydrated specimens can be collected with the requisite low dose. Long chromatin fibers were prepared in 90 mM monovalent ions to maintain a fully compact conformation, and after vitrification were completely contained within the ice layer. Tilt series of this material were recorded at 5 degrees tilt increments between +60 degrees and -60 degrees, with a cumulative dose of approximately 35 e-/A2 for the series. This extremely low dose data was successfully aligned, then reconstructed by weighted backprojection. The underlying architecture of the fibers is an irregular 3D zigzag of interconnected nucleosomes, with the linker DNA between successive nucleosomes in a largely extended conformation. The visualization of this structural motif within long, frozen-hydrated chromatin fibers at relatively high salt extends our previous studies on small fragments at low ionic strength and is in agreement with the observation of this architecture in chromatin fibers in situ in sectioned nuclei.

Animals↗

PubMed1997

Automated electron tomography of large nuclear RNP (InRNP) particles--the naturally assembled complexes of precursor messenger RNA and splicing factors.

Splicing of nuclear pre-mRNA is an important step in the regulation of gene expression as only correctly spliced mRNAs will be exported to the cytoplasm to function in protein synthesis. Nuclear RNA transcripts of split genes and their splicing products, as well as the general population of nuclear polyadenylated RNA, are packaged in multicomponent large nuclear ribonucleoprotein (lnRNP) particles. These lnRNP particles, which sediment at the 200S region in sucrose gradients, contain all U snRNPs required for pre-mRNA splicing and several protein splicing factors, including U2AF and the SR proteins and can thus be viewed as naturally assembled complexes of pre-mRNA and splicing factors. We have previously reconstructed the three-dimensional image of negatively stained individual lnRNP particles by automated electron tomography. The reconstruction revealed a compact structure, 50 nm in diameter, composed of four major subunits. Here we further analyzed the reconstructed models and the apparent connectivity between the subunits using a new rendering technique. The uniformity of the lnRNP particles was substantiated by measurement of the volume engulfed by their surface. This study further supports the model proposed for the packaging of nuclear pre-mRNAs in lnRNP particles, where each substructure represents a functional unit. This model is compatible with the requirements for alternative splicing in multiintronic pre-mRNAs, and with the fact that the splicing of multiintronic pre-mRNAs does not occur in a sequential manner.

Animals↗

PubMed1997

Perspectives of molecular and cellular electron tomography.

After a general introduction to three-dimensional electron microscopy and particularly to electron tomography (ET), the perspectives of applying ET to native (frozen-hydrated) cellular structures are discussed. In ET, a set of 2-D images of an object is recorded at different viewing directions and is then used for calculating a 3-D image. ET at a resolution of 2-5 nm would allow the 3-D organization of structural cellular components to be studied and would provide important information about spatial relationships and interactions. The question of whether it is a realistic long-term goal to visualize or--by sophisticated pattern recognition methods--identify macromolecules in cells frozen in toto or in frozen sections of cells is addressed. Because of the radiation sensitivity of biological specimens, a prerequisite of application of ET is the automation of the imaging process. Technical aspects of automated ET as realized in Martinsried and experiences are presented, and limitations of the technique are identified, both theoretically and experimentally. Possible improvements of instrumentation to overcome at least part of the limitations are discussed in some detail. Those means include increasing the accelerating voltage into the intermediate voltage range (300 to 500 kV), energy filtering, the use of a field emission gun, and a liquid-helium-cooled specimen stage. Two additional sections deal with ET of isolated macromolecules and of macromolecular structures in situ, and one section is devoted to possible methods for the detection of structures in volume data.

Actins↗

PubMed1997

Tricorn protease exists as an icosahedral supermolecule in vivo.

Tricorn protease is the core enzyme of a recently discovered modular proteolytic system. We present evidence that tricorn protease exists in vivo in the form of a higher-order assembly, namely as an icosahedral capsid. Its size exceeds that of many virus particles and represents by far the largest known homooligomeric enzyme complex. Each capsid is built from 20 copies of the tricorn hexameric toroid and thus has a molecular weight of 14.6 MDa. Three-dimensional reconstructions of ice-embedded capsids from electron micrographs show that it is hollow and has large void volumes in its wall. We suggest that the tricorn capsid, in addition to its intrinsic proteolytic activity, serves as the organizing center of a multienzyme complex.

Archaeal Proteins↗

PubMed1995

Structural features of archaebacterial and eukaryotic proteasomes.

The 26S proteasome is the central protease of the ubiquitin-dependent pathway of protein degradation. The molecule has a molecular mass of approximately 2000 kD and has a highly conserved structure in eukaryotes. The 26S proteasome is formed by a barrel-shaped 20S core complex and two polar 19S complexes. The 20S complex has C2 symmetry and is formed by four seven-membered rings of which the outer rings (alpha-type subunits) are rotated by 25.7 degrees relative to the inner rings while the inner rings (beta-type subunits) are in register. From a comparison of the activity and regulation of the 26S and 20S particles it can be deduced that the 20S particle contains the protease activity while the 19S complex contains isopeptidase, ATPase and protein unfolding activities. In this article we describe the structures of various proteasome complexes as determined by electron microscopy and discuss structural implications of their subunit sequences.

Animals↗