Biomedical subjects

A J Mattus

Publications and source records attributed to A J Mattus.

2 recordsLinked to original sources

PubMed2004

Laboratory stabilizations/solidification of tank sludges: MVST/BVEST.

Oak Ridge tank sludges that have been collected over several decades are being combined for treatment and disposal. Stabilization of the highly radioactive, mixed-waste sludges in the different tank sets has been evaluated prior to the proposed combination and treatment. This paper documents the testing of a Melton Valley Storage Tank (MVST)/Bethel Valley Evaporator Storage Tank set. Subsequent papers will discuss continued work on other tank sets and efforts to maximize the sludge loading. Grout formulations were tested in the laboratory both with a surrogate and with a sample of an actual mixed waste tank sludge from MVST W-25. Wet-sludge loadings of 50-60wt% resulted in strong wasteforms with no free water and gave a volume increase of about 40-50vol%. Resource Conservation and Recovery Act (RCRA) metals included in the surrogate testing were cadmium, chromium, lead, selenium, thallium, and mercury. The actual sludge sample was only characteristically hazardous for mercury by the Toxic Characteristic Leaching Procedure but exceeded the Universal Treatment Standard (UTS) limit for chromium. The grout formulations stabilized these two RCRA metals within UTS limits. In addition, a grout leachability index of about 9.0-10.0 was measured for both (85)Sr and (137)Cs, meeting the recommended requirement of >6.0.

Conservation of Natural Resources↗

PubMed2004

Laboratory stabilization/solidification of tank sludges: maximizing sludge loading.

Highly radioactive, mixed-waste sludges that have been collected in tanks at Oak Ridge over several decades are being combined for treatment and disposal. Stabilization of the sludges in the different tank sets was tested prior to the proposed combination and treatment. This paper is the third one in a series on the laboratory stabilization/solidification of these tank sludges. It discusses efforts to maximize the sludge loading with no strength criterion for the grout formulation. Grout formulations were tested in the laboratory both with surrogates and with actual samples of tank sludge. Hydrogels eliminated free water generation, even at sludge loadings of >90wt%, albeit strong monoliths did not form at such high loadings. Correlations established the dependence of the chromium and mercury performance in the Toxicity Characteristic Leach Procedure for the surrogates on the slag content of the grout while the lead performance depended on the extract pH. The surrogate sludge loading was limited by the chromate content to about 90wt%, meeting Universal Treatment Standard limits. However, tests with actual sludges at such high loadings revealed problems with lead and silver stabilization that were not experienced with the surrogate testing.

Chromium↗