PubMed Health⌕ Search

Biomedical subjects

A Kapanen

Publications and source records attributed to A Kapanen.

7 recordsLinked to original sources
PubMed2002

The influence of lignin content and temperature on the biodegradation of lignocellulose in composting conditions.

The aim of this research was to study the influence of lignin content and composting temperature on the biodegradation of lignin-containing pulp and paper products in a controlled composting test (European standard prEN 14046). Lignin reduced the biodegradation of the samples, and there was a linear correlation between the lignin content and the biodegradation of pulp and paper products at 58 degrees C. The influence of incubation temperature (35, 50 and 58 degrees C) on biodegradation was studied using bleached kraft paper containing 0.2 wt% lignin and mechanical pulp (stone-ground wood) containing 24-27 wt% lignin. Mechanical pulp biodegraded better at lower temperatures, while kraft paper biodegraded well at all three temperatures. Microbial activity was evaluated by measuring CO(2) evolution and the change in ATP content, and fungal biomass by measuring the ergosterol content during the composting experiments. Kraft paper strongly increased microbial activity during the controlled composting test, but the activity returned to the background level at the end of the composting test. The proportion of sample carbon converted to microbial biomass carbon was considerably higher at lower incubation temperatures. Changes in microbial community structure during biodegradation of mechanical pulp and kraft paper at 50 degrees C were studied by the PCR-based technique denaturing gradient gel electrophoresis. Changes in the microbial community were observed during the intensive degradation phase of kraft paper.

Bacteria↗
PubMed2002

Bone morphogenetic protein 3b expressing reindeer antler.

A cDNA sequence of bone morphogenetic protein 3b (BMP-3b) of reindeer antler was produced with degenerative homology primers in polymerase chain reaction (PCR). An in situ hybridization study of BMP-3b mRNA in 1-month-old antler showed expression in most differentiated cells in the antler center. In addition, the bone-inductive capacity of the reindeer antler matrix was evaluated. Decalcified and powdered antler matrix of different stages of antler maturity was implanted in gelatin capsules under the rat dorsal muscle fascia for two implantation periods: 3 and 8 weeks. Allogenic matrix prepared from rat long bones was used as a positive control implant. Heterotopic ossification was evaluated histomorphometrically and densitometrically. Allogenic bone matrix induced rapid osteogenesis and mineral accumulation. Both endochondral and intramembranous ossification was evident, endochondral ossification being the dominant form. Mineral density in the induced ossicle was 115 +/- 48 mg/cm(3) as early as at 3 weeks and 350 +/- 69 mg/cm(3) at 8 weeks. The proportional areas of von Kossa-stained mineral were 3.67 +/- 2.1% and 11.6 +/- 0.07%, respectively. The antler preparations induced mineralization, but significantly less than the allogenic bone matrix. At 8 weeks, mineral density was significantly lower in the cast antler preparation than in the allogenic implants. The morphology of the mineralized areas of the antler preparations showed no ossification.

Animals↗
PubMed2002

Behaviour of nitinol in osteoblast-like ROS-17 cell cultures.

Nickel titanium shape memory metal alloy Nitinol (NiTi) has been used in dental wares and in gastrointestinal surgery. Nitinol is a promising implant material in orthopedics, but its biocompatibility, especially in long-term implantation is not confirmed yet. We studied Nitinol's effect on a cell culture model. Comparisons to stainless steel, pure titanium and pure nickel were performed. The effects of Nitinol on cell death rate, the apoptosis rate and the formation of local contacts were studied on rat osteosarcoma cell line ROS-17 in 48-h cultures. The cell death rate was assessed with combined calcein-ethidium-homodimer labelling. The amount of dead cells 1000 cells were as follows: four in the NiTi, 21 in the Stst, 4.8 in the Ti and 51 in the Ni group. In the NiTi and Ti groups, the number of dead cells was significantly lower (p < or = 0.01) than in Ni group. The rate of apoptosis was detected with TUNEL-assay. The assay results were: 1.93 apoptotic cells 1000 cells in the NiTi, 1.1 in the Stst, 2.98 in the Ti and 0.62 in the Ni group. A comparison of these two results shows that 48% of the dead cells were apoptotic in the NiTi, 56.6 in the Stst, 62% in the Ti and only 1.8% in the Ni group. The focal contacts were stained with a paxillin antibody and counted. There were marked differences in the number of focal contacts per unit area compared to NiTi (774 focal contacts): 335 in Stst (p < or = 0.01), 462 in Ti (p < or = 0.01) and 261 in Ni (p < or = 0.005). Our results show that NiTi is well tolerated by the osteoblastic type ROS-17 cells.

Alloys↗
PubMed2001

Ecotoxicity tests for compost applications.

Interest in the ecological effects of composting has been growing recently. However, no established methods are available for testing the toxicity of composted materials. Despite this, international and national quality requirements define that compost shall not contain any environmentally harmful substances. Safety requirements have to be fulfilled if the produced compost is intended for agricultural use. This literature review focuses on methods that could potentially be used to evaluate the ecotoxicity of compost. The toxicity test methods discussed are those employing microbes, enzymes, soil fauna, and plants.

Animals↗
PubMed2001

Effect of nickel-titanium shape memory metal alloy on bone formation.

The aim of this study was to determine the biocompatibility of NiTi alloy on bone formation in vivo. For this purpose we used ectopic bone formation assay which goes through all the events of bone formation and calcification. Comparisons were made between Nitinol (NiTi), stainless steel (Stst) and titanium-aluminium (6%)-vanadium (4%) alloy (Ti-6Al-4V), which were implanted for 8 weeks under the fascia of the latissimus dorsi muscle in 3-month-old rats. A light-microscopic examination showed no chronic inflammatory or other pathological findings in the induced ossicle or its capsule. New bone replaced part of the decalcified matrix with mineralized new cartilage and bone. The mineral density was measured with peripheral quantitative computed tomography (pQCT). The total bone mineral density (BMD) values were nearly equal between the control and the NiTi samples, the Stst samples and the Ti-6Al-4V samples had lower BMDs. Digital image analysis was used to measure the combined area of new fibrotic tissue and original implanted bone matrix powder around the implants. There were no significant differences between the implanted materials, although Ti-6Al-4V showed the largest matrix powder areas. The same method was used for measurements of proportional cartilage and new bone areas in the ossicles. NiTi showed the largest cartilage area (p < or = 0.05). Between implant groups the new bone area was largest in NiTi. We conclude that NiTi has good biocompatibility, as its effects on ectopic bone formation are similar to those of Stst, and that the ectopic bone formation assay developed here can be used for biocompatibility studies.

Alloys↗
PubMed1998

Estrogen enhances differentiation of osteoblasts in mouse bone marrow culture.

The effects of estrogen on bone are possibly mediated by several cell types. In the present study, the effect of 17beta-estradiol (E2) on osteoblast-like cells was investigated by using mouse bone marrow cultures. Bone marrow cells were harvested from the shafts of femurs of 10-week-old NMRI mice and cultured. On day 6, confluent primary cultures were trypsinized and subcultured. Under the conditions used (Keila, S., Pitaru, S., Grosskopf, A., and Wernreb, M. Bone marrow from mechanically unloaded rat bones expresses reduced osteogenic capacity in vitro. J Bone Miner Res 9:321-327; 1994), the bone marrow cultures showed differentiation towards the osteoblastic phenotype. This was demonstrated by the appearance of osteoblastic markers such as alpha1(I) collagen (COL1), alkaline phosphatase (ALP), osteocalcin (OCN), osteopontin (OP), and transforming growth factor-beta1 (TGFbeta1), which were detected by using reverse transcriptase polymerase chain reaction (RT-PCR). Bone nodule formation, including deposition of collagen fibers and matrix mineralization, was also studied at several time points of the 3-week culture period. The effect of E2 on the appearance of osteoblastic markers was studied by incubating cultures in the presence or absence of the hormone. The messenger ribonucleic acid (mRNA) for the estrogen receptor (ER) was found to be expressed at all time points as demonstrated by RT-PCR. When grown with E2, the rate of cell proliferation was increased in the early phase of cultures, but not after day 6. The addition of E2 in subcultures resulted in an increase of levels of mRNA for COL1, ALP, OCN, OP, and TGF-beta1. ALP activity was also increased. Bone nodule formation, as well as calcium contents, were significantly increased in the cultures grown in the presence of E2. All E2 concentrations used (0.01-10 nmol/L) were effective but the maximum response was obtained with 0.1 nmol/L E2. Addition of the antiestrogen ICI 182,780 abolished the E2-induced stimulation of proliferation and later an increase in ALP activity. Addition of ICI 182,780 without the hormone did not cause any changes when compared to control cultures. In conclusion, our results demonstrate that E2 stimulates sequential differentiation of osteoblasts and increases deposition and mineralization of matrix in mouse bone marrow cultures in an estrogen receptor-dependent manner.

Alkaline Phosphatase↗