PubMed Health⌕ Search

Biomedical subjects

A Kolinski

Publications and source records attributed to A Kolinski.

At least 19 recordsLinked to original sources
PubMed2001

Model of three-dimensional structure of vitamin D receptor and its binding mechanism with 1alpha,25-dihydroxyvitamin D(3).

Comparative modeling of the vitamin D receptor three-dimensional structure and computational docking of 1alpha,25-dihydroxyvitamin D(3) into the putative binding pocket of the two deletion mutant receptors: (207-423) and (120-422, Delta [164-207]) are reported and evaluated in the context of extensive mutagenic analysis and crystal structure of holo hVDR deletion protein published recently. The obtained molecular model agrees well with the experimentally determined structure. Six different conformers of 1alpha,25-dihydroxyvitamin D(3) were used to study flexible docking to the receptor. On the basis of values of conformational energy of various complexes and their consistency with functional activity, it appears that 1alpha,25-dihydroxyvitamin D(3) binds the receptor in its 6-s-trans form. The two lowest energy complexes obtained from docking the hormone into the deletion protein (207-423) differ in conformation of ring A and orientation of the ligand molecule in the VDR pocket. 1alpha,25-Dihydroxyvitamin D(3) possessing the A-ring conformation with axially oriented 1alpha-hydroxy group binds receptor with its 25-hydroxy substituent oriented toward the center of the receptor cavity, whereas ligand possessing equatorial conformation of 1alpha-hydroxy enters the pocket with A ring directed inward. The latter conformation and orientation of the ligand is consistent with the crystal structure of hVDR deletion mutant (118-425, Delta [165-215]). The lattice model of rVDR (120-422, Delta [164-207]) shows excellent agreement with the crystal structure of the hVDR mutant. The complex obtained from docking the hormone into the receptor has lower energy than complexes for which homology modeling was used. Thus, a simple model of vitamin D receptor with the first two helices deleted can be potentially useful for designing a general structure of ligand, whereas the advanced lattice model is suitable for examining binding sites in the pocket.

Amino Acid Sequence↗
PubMed2001

TOUCHSTONE: an ab initio protein structure prediction method that uses threading-based tertiary restraints.

The successful prediction of protein structure from amino acid sequence requires two features: an efficient conformational search algorithm and an energy function with a global minimum in the native state. As a step toward addressing both issues, a threading-based method of secondary and tertiary restraint prediction has been developed and applied to ab initio folding. Such restraints are derived by extracting consensus contacts and local secondary structure from at least weakly scoring structures that, in some cases, can lack any global similarity to the sequence of interest. Furthermore, to generate representative protein structures, a reduced lattice-based protein model is used with replica exchange Monte Carlo to explore conformational space. We report results on the application of this methodology, termed TOUCHSTONE, to 65 proteins whose lengths range from 39 to 146 residues. For 47 (40) proteins, a cluster centroid whose rms deviation from native is below 6.5 (5) A is found in one of the five lowest energy centroids. The number of correctly predicted proteins increases to 50 when atomic detail is added and a knowledge-based atomic potential is combined with clustered and nonclustered structures for candidate selection. The combination of the ratio of the relative number of contacts to the protein length and the number of clusters generated by the folding algorithm is a reliable indicator of the likelihood of successful fold prediction, thereby opening the way for genome-scale ab initio folding.

Algorithms↗
PubMed2001

Generalized comparative modeling (GENECOMP): a combination of sequence comparison, threading, and lattice modeling for protein structure prediction and refinement.

An improved generalized comparative modeling method, GENECOMP, for the refinement of threading models is developed and validated on the Fischer database of 68 probe-template pairs, a standard benchmark used to evaluate threading approaches. The basic idea is to perform ab initio folding using a lattice protein model, SICHO, near the template provided by the new threading algorithm PROSPECTOR. PROSPECTOR also provides predicted contacts and secondary structure for the template-aligned regions, and possibly for the unaligned regions by garnering additional information from other top-scoring threaded structures. Since the lowest-energy structure generated by the simulations is not necessarily the best structure, we employed two structure-selection protocols: distance geometry and clustering. In general, clustering is found to generate somewhat better quality structures in 38 of 68 cases. When applied to the Fischer database, the protocol does no harm and in a significant number of cases improves upon the initial threading model, sometimes dramatically. The procedure is readily automated and can be implemented on a genomic scale.

Algorithms↗
PubMed2001

Ab initio protein structure prediction via a combination of threading, lattice folding, clustering, and structure refinement.

A combination of sequence comparison, threading, lattice, and off-lattice Monte Carlo (MC) simulations and clustering of MC trajectories was used to predict the structure of all (but one) targets of the CASP4 experiment on protein structure prediction. Although this method is automated and is operationally the same regardless of the level of uniqueness of the query proteins, here we focus on the more difficult targets at the border of the fold recognition and new fold categories. For a few targets (T0110 is probably the best example), the ab initio method produced more accurate models than models obtained by the fold recognition techniques. For the most difficult targets from the new fold categories, substantial fragments of structures have been correctly predicted. Possible improvements of the method are briefly discussed.

Cluster Analysis↗
PubMed2001

Three-dimensional modeling of the I-TevI homing endonuclease catalytic domain, a GIY-YIG superfamily member, using NMR restraints and Monte Carlo dynamics.

Using a recent version of the SICHO algorithm for in silico protein folding, we made a blind prediction of the tertiary structure of the N-terminal, independently folded, catalytic domain (CD) of the I-TevI homing endonuclease, a representative of the GIY-YIG superfamily of homing endonucleases. The secondary structure of the I-TevI CD has been determined using NMR spectroscopy, but computational sequence analysis failed to detect any protein of known tertiary structure related to the GIY-YIG nucleases (Kowalski et al., Nucleic Acids Res., 1999, 27, 2115-2125). To provide further insight into the structure-function relationships of all GIY-YIG superfamily members, including the recently described subfamily of type II restriction enzymes (Bujnicki et al., Trends Biochem. Sci., 2000, 26, 9-11), we incorporated the experimentally determined and predicted secondary and tertiary restraints in a reduced (side chain only) protein model, which was minimized by Monte Carlo dynamics and simulated annealing. The subsequently elaborated full atomic model of the I-TevI CD allows the available experimental data to be put into a structural context and suggests that the GIY-YIG domain may dimerize in order to bring together the conserved residues of the active site.

Algorithms↗
PubMed2000

Accurate reconstruction of all-atom protein representations from side-chain-based low-resolution models.

A procedure for the reconstruction of all-atom protein structures from side-chain center-based low-resolution models is introduced and applied to a set of test proteins with high-resolution X-ray structures. The accuracy of the rebuilt all-atom models is measured by root mean square deviations to the corresponding X-ray structures and percentages of correct chi(1) and chi(2) side-chain dihedrals. The benefit of including C(alpha) positions in the low-resolution model is examined, and the effect of lattice-based models on the reconstruction accuracy is discussed. Programs and scripts implementing the reconstruction procedure are made available through the NIH research resource for Multiscale Modeling Tools in Structural Biology (http://mmtsb.scripps.edu).

Models, Molecular↗
PubMed2000

Derivation of protein-specific pair potentials based on weak sequence fragment similarity.

A method is presented for the derivation of knowledge-based pair potentials that corrects for the various compositions of different proteins. The resulting statistical pair potential is more specific than that derived from previous approaches as assessed by gapless threading results. Additionally, a methodology is presented that interpolates between statistical potentials when no homologous examples to the protein of interest are in the structural database used to derive the potential, to a Go-like potential (in which native interactions are favorable and all nonnative interactions are not) when homologous proteins are present. For cases in which no protein exceeds 30% sequence identity, pairs of weakly homologous interacting fragments are employed to enhance the specificity of the potential. In gapless threading, the mean z score increases from -10.4 for the best statistical pair potential to -12.8 when the local sequence similarity, fragment-based pair potentials are used. Examination of the ab initio structure prediction of four representative globular proteins consistently reveals a qualitative improvement in the yield of structures in the 4 to 6 A rmsd from native range when the fragment-based pair potential is used relative to that when the quasichemical pair potential is employed. This suggests that such protein-specific potentials provide a significant advantage relative to generic quasichemical potentials.

Amino Acids↗
PubMed2000

Computer simulations of the properties of the alpha2, alpha2C, and alpha2D de novo designed helical proteins.

Reduced lattice models of the three de novo designed helical proteins alpha2, alpha2C, and alpha2D were studied. Low temperature stable folds were obtained for all three proteins. In all cases, the lowest energy folds were four-helix bundles. The folding pathway is qualitatively the same for all proteins studied. The energies of various topologies are similar, especially for the alpha2 polypeptide. The simulated crossover from molten globule to native-like behavior is very similar to that seen in experimental studies. Simulations on a reduced protein model reproduce most of the experimental properties of the alpha2, alpha2C, and alpha2D proteins. Stable four-helix bundle structures were obtained, with increasing native-like behavior on-going from alpha2 to alpha2D that mimics experiment.

Amino Acid Sequence↗
PubMed2000

Structural genomics and its importance for gene function analysis.

Structural genomics projects aim to solve the experimental structures of all possible protein folds. Such projects entail a conceptual shift from traditional structural biology in which structural information is obtained on known proteins to one in which the structure of a protein is determined first and the function assigned only later. Whereas the goal of converting protein structure into function can be accomplished by traditional sequence motif-based approaches, recent studies have shown that assignment of a protein's biochemical function can also be achieved by scanning its structure for a match to the geometry and chemical identity of a known active site. Importantly, this approach can use low-resolution structures provided by contemporary structure prediction methods. When applied to genomes, structural information (either experimental or predicted) is likely to play an important role in high-throughput function assignment.

Animals↗
PubMed1999

A method for the improvement of threading-based protein models.

A new method for the homology-based modeling of protein three-dimensional structures is proposed and evaluated. The alignment of a query sequence to a structural template produced by threading algorithms usually produces low-resolution molecular models. The proposed method attempts to improve these models. In the first stage, a high-coordination lattice approximation of the query protein fold is built by suitable tracking of the incomplete alignment of the structural template and connection of the alignment gaps. These initial lattice folds are very similar to the structures resulting from standard molecular modeling protocols. Then, a Monte Carlo simulated annealing procedure is used to refine the initial structure. The process is controlled by the model's internal force field and a set of loosely defined restraints that keep the lattice chain in the vicinity of the template conformation. The internal force field consists of several knowledge-based statistical potentials that are enhanced by a proper analysis of multiple sequence alignments. The template restraints are implemented such that the model chain can slide along the template structure or even ignore a substantial fraction of the initial alignment. The resulting lattice models are, in most cases, closer (sometimes much closer) to the target structure than the initial threading-based models. All atom models could easily be built from the lattice chains. The method is illustrated on 12 examples of target/template pairs whose initial threading alignments are of varying quality. Possible applications of the proposed method for use in protein function annotation are briefly discussed.

Amino Acid Sequence↗
PubMed1999

Correlation between knowledge-based and detailed atomic potentials: application to the unfolding of the GCN4 leucine zipper.

The relationship between the unfolding pseudo free energies of reduced and detailed atomic models of the GCN4 leucine zipper is examined. Starting from the native crystal structure, a large number of conformations ranging from folded to unfolded were generated by all-atom molecular dynamics unfolding simulations in an aqueous environment at elevated temperatures. For the detailed atomic model, the pseudo free energies are obtained by combining the CHARMM all-atom potential with a solvation component from the generalized Born, surface accessibility, GB/SA, model. Reduced model energies were evaluated using a knowledge-based potential. Both energies are highly correlated. In addition, both show a good correlation with the root mean square deviation, RMSD, of the backbone from native. These results suggest that knowledge-based potentials are capable of describing at least some of the properties of the folded as well as the unfolded states of proteins, even though they are derived from a database of native protein structures. Since only conformations generated from an unfolding simulation are used, we cannot assess whether these potentials can discriminate the native conformation from the manifold of alternative, low-energy misfolded states. Nevertheless, these results also have significant implications for the development of a methodology for multiscale modeling of proteins that combines reduced and detailed atomic models.

DNA-Binding Proteins↗
PubMed1999

Ab initio folding of proteins using restraints derived from evolutionary information.

We present our predictions in the ab initio structure prediction category of CASP3. Eleven targets were folded, using a method based on a Monte Carlo search driven by secondary and tertiary restraints derived from multiple sequence alignments. Our results can be qualitatively summarized as follows: The global fold can be considered "correct" for targets 65 and 74, "almost correct" for targets 64, 75, and 77, "half-correct" for target 79, and "wrong" for targets 52, 56, 59, and 63. Target 72 has not yet been solved experimentally. On average, for small helical and alpha/beta proteins (on the order of 110 residues or smaller), the method predicted low resolution structures with a reasonably good prediction of the global topology. Most encouraging is that in some situations, such as with target 75 and, particularly, target 77, the method can predict a substantial portion of a rare or even a novel fold. However, the current method still fails on some beta proteins, proteins over the 110-residue threshold, and sequences in which only a poor multiple sequence alignment can be built. On the other hand, for small proteins, the method gives results of quality at least similar to that of threading, with the advantage of not being restricted to known folds in the protein database. Overall, these results indicate that some progress has been made on the ab initio protein folding problem. Detailed information about our results can be obtained by connecting to http:/(/)www.bioinformatics.danforthcenter.org/+ ++CASP3.

Algorithms↗
PubMed1999

De novo simulations of the folding thermodynamics of the GCN4 leucine zipper.

Entropy Sampling Monte Carlo (ESMC) simulations were carried out to study the thermodynamics of the folding transition in the GCN4 leucine zipper (GCN4-lz) in the context of a reduced model. Using the calculated partition functions for the monomer and dimer, and taking into account the equilibrium between the monomer and dimer, the average helix content of the GCN4-lz was computed over a range of temperatures and chain concentrations. The predicted helix contents for the native and denatured states of GCN4-lz agree with the experimental values. Similar to experimental results, our helix content versus temperature curves show a small linear decline in helix content with an increase in temperature in the native region. This is followed by a sharp transition to the denatured state. van't Hoff analysis of the helix content versus temperature curves indicates that the folding transition can be described using a two-state model. This indicates that knowledge-based potentials can be used to describe the properties of the folded and unfolded states of proteins.

Computer Simulation↗
PubMed1999

Dynamics and thermodynamics of beta-hairpin assembly: insights from various simulation techniques.

Small peptides that might have some features of globular proteins can provide important insights into the protein folding problem. Two simulation methods, Monte Carlo Dynamics (MCD), based on the Metropolis sampling scheme, and Entropy Sampling Monte Carlo (ESMC), were applied in a study of a high-resolution lattice model of the C-terminal fragment of the B1 domain of protein G. The results provide a detailed description of folding dynamics and thermodynamics and agree with recent experimental findings (. Nature. 390:196-197). In particular, it was found that the folding is cooperative and has features of an all-or-none transition. Hairpin assembly is usually initiated by turn formation; however, hydrophobic collapse, followed by the system rearrangement, was also observed. The denatured state exhibits a substantial amount of fluctuating helical conformations, despite the strong beta-type secondary structure propensities encoded in the sequence.

Amino Acid Sequence↗
PubMed1998

Assembly of protein structure from sparse experimental data: an efficient Monte Carlo model.

A new, efficient method for the assembly of protein tertiary structure from known, loosely encoded secondary structure restraints and sparse information about exact side chain contacts is proposed and evaluated. The method is based on a new, very simple method for the reduced modeling of protein structure and dynamics, where the protein is described as a lattice chain connecting side chain centers of mass rather than Calphas. The model has implicit built-in multibody correlations that simulate short- and long-range packing preferences, hydrogen bonding cooperativity and a mean force potential describing hydrophobic interactions. Due to the simplicity of the protein representation and definition of the model force field, the Monte Carlo algorithm is at least an order of magnitude faster than previously published Monte Carlo algorithms for structure assembly. In contrast to existing algorithms, the new method requires a smaller number of tertiary restraints for successful fold assembly; on average, one for every seven residues as compared to one for every four residues. For example, for smaller proteins such as the B domain of protein G, the resulting structures have a coordinate root mean square deviation (cRMSD), which is about 3 A from the experimental structure; for myoglobin, structures whose backbone cRMSD is 4.3 A are produced, and for a 247-residue TIM barrel, the cRMSD of the resulting folds is about 6 A. As would be expected, increasing the number of tertiary restraints improves the accuracy of the assembled structures. The reliability and robustness of the new method should enable its routine application in model building protocols based on various (very sparse) experimentally derived structural restraints.

Algorithms↗
PubMed1998

Fold assembly of small proteins using monte carlo simulations driven by restraints derived from multiple sequence alignments.

The feasibility of predicting the global fold of small proteins by incorporating predicted secondary and tertiary restraints into ab initio folding simulations has been demonstrated on a test set comprised of 20 non-homologous proteins, of which one was a blind prediction of target 42 in the recent CASP2 contest. These proteins contain from 37 to 100 residues and represent all secondary structural classes and a representative variety of global topologies. Secondary structure restraints are provided by the PHD secondary structure prediction algorithm that incorporates multiple sequence information. Predicted tertiary restraints are derived from multiple sequence alignments via a two-step process. First, seed side-chain contacts are identified from correlated mutation analysis, and then a threading-based algorithm is used to expand the number of these seed contacts. A lattice-based reduced protein model and a folding algorithm designed to incorporate these predicted restraints is described. Depending upon fold complexity, it is possible to assemble native-like topologies whose coordinate root-mean-square deviation from native is between 3.0 A and 6.5 A. The requisite level of accuracy in side-chain contact map prediction can be roughly 25% on average, provided that about 60% of the contact predictions are correct within +/-1 residue and 95% of the predictions are correct within +/-4 residues. Precision in tertiary contact prediction is more critical than absolute accuracy. Furthermore, only a subset of the tertiary contacts, on the order of 25% of the total, is sufficient for successful topology assembly. Overall, this study suggests that the use of restraints derived from multiple sequence alignments combined with a fold assembly algorithm holds considerable promise for the prediction of the global topology of small proteins.

Amino Acid Sequence↗
PubMed1998

Tertiary structure prediction of the KIX domain of CBP using Monte Carlo simulations driven by restraints derived from multiple sequence alignments.

Using a recently developed protein folding algorithm, a prediction of the tertiary structure of the KIX domain of the CREB binding protein is described. The method incorporates predicted secondary and tertiary restraints derived from multiple sequence alignments in a reduced protein model whose conformational space is explored by Monte Carlo dynamics. Secondary structure restraints are provided by the PHD secondary structure prediction algorithm that was modified for the presence of predicted U-turns, i.e., regions where the chain reverses global direction. Tertiary restraints are obtained via a two-step process: First, seed side-chain contacts are identified from a correlated mutation analysis, and then, a threading-based algorithm expands the number of these seed contacts. Blind predictions indicate that the KIX domain is a putative three-helix bundle, although the chirality of the bundle could not be uniquely determined. The expected root-mean-square deviation for the correct chirality of the KIX domain is between 5.0 and 6.2 A. This is to be compared with the estimate of 12.9 A that would be expected by a random prediction, using the model of F. Cohen and M. Sternberg (J. Mol. Biol. 138:321-333, 1980).

Algorithms↗