PubMed Health⌕ Search

Biomedical subjects

A M Jørgensen

Publications and source records attributed to A M Jørgensen.

10 recordsLinked to original sources

A biocompatible micro cell culture chamber (microCCC) for the culturing and on-line monitoring of eukaryote cells.

We have previously shown that a polymeric (PMMA) chip with medium perfusion and integrated heat regulation provides sufficiently precise heat regulation, pH-control and medium exchange to support cell growth for weeks. However, it was unclear how closely the cells cultured in the chip resembled cells cultured in the culture flask. In the current study, gene expression profiles of cells cultured in the chip were compared with gene expression profiles of cells cultured in culture flasks. The results showed that there were only two genes that were differently expressed in cells grown in the cell culture chip compared to cell culture flasks. The cell culture chip could without further modification support cell growth of two other cell lines. Light coming from the microscope lamp during optical recordings of the cells was the only external factor identified, that could have a negative effect on cell survival. Low grade light exposure was however compatible with optical recordings as well as cell viability. These results strongly indicate that a cell culture chip could be constructed that allowed for on-line optical recording of cellular events without affecting the cell culturing condition compared to cell cultured in culture flasks incubated in a dark and CO2 conditioned incubator.

Caco-2 Cells↗

Solution structure of reduced plastocyanin from the blue-green alga Anabaena variabilis.

The three-dimensional solution structure of plastocyanin from Anabaena variabilis (A.v.PCu) has been determined by nuclear magnetic resonance spectroscopy. Sixty structures were calculated by distance geometry from 1141 distance restraints and 46 dihedral angle restraints. The distance geometry structures were optimized by simulated annealing and restrained energy minimization. The average rms deviation from the mean structure for the 20 structures with the lowest total energy is 1.25 A for the backbone atoms and 1.75 A for all heavy atoms. Overall, the global tertiary fold of A.v.PCu resembles those of other plastocyanins which have been structurally characterized by X-ray diffraction and NMR methods. This holds even though A.v.PCu is longer than any other known plastocyanins, contains far less invariant amino acid residues, and has an overall charge that differs considerably from those of other plastocyanins (+1 vs -9 +/- 1 at pH > or = 7). The most striking feature of the A.v. PCu structure is the absence of the beta-turn, formed at the remote site by residues (58)-(61) in most higher plant plastocyanins. The displacement caused by the absence of this turn is compensated for by an extension of the small helix [from Ala53(51) to Ser60(58) in A.v.PCu] found in other plastocyanins. Moreover, the extra residues of A.v.PCu from Pro77 to Asp79 form an appended loop. These two features allow A.v.PCu to retain almost the same global fold as observed in other plastocyanins. From a comparison with the structures of other plastocyanins it is concluded that the lack of negatively charged residues at the remote site, rather than the specific structure of A.v.PCu, is the main reason for the failure of the remote site of this plastocyanin to function as a significant electron transfer site.

Amino Acid Sequence↗

Solution structure of the superactive monomeric des-[Phe(B25)] human insulin mutant: elucidation of the structural basis for the monomerization of des-[Phe(B25)] insulin and the dimerization of native insulin.

The three-dimensional solution structure of des-[Phe(B25)] human insulin has been determined by nuclear magnetic resonance spectroscopy and restrained molecular dynamics calculations. Thirty-five structures were calculated by distance geometry from 581 nuclear Overhauser enhancement-derived distance constraints, ten phi torsional angle restraints, the restraints from 16 helical hydrogen bonds, and three disulfide bridges. The distance geometry structures were optimized using simulated annealing and restrained energy minimization. The average root-mean-square (r.m.s.) deviation for the best 20 refined structures is 1.07 angstroms for the backbone and 1.92 angstroms for all atoms if the less well-defined N and C-terminal residues are excluded. The helical regions are more well defined, with r.m.s. deviations of 0.64 angstroms for the backbone and 1.51 angstroms for all atoms. It is found that the des-[Phe(B25)] insulin is a monomer under the applied conditions (4.6 to 4.7 mM, pH 3.0, 310 K), that the overall secondary and tertiary structures of the monomers in the 2Zn crystal hexamer of native insulin are preserved, and that the conformation-averaged NMR solution structure is close to the structure of molecule 1 in the hexamer. The structure reveals that the lost ability of des-[Phe(B25)] insulin to self-associate is caused by a conformational change of the C-terminal region of the B-chain, which results in an intra-molecular hydrophobic interaction between Pro(B28) and the hydrophobic region Leu(B11)-Leu(B15) of the B-chain alpha-helix. This interaction interferes with the inter-molecular hydrophobic interactions responsible for the dimerization of native insulin, depriving the mutant of the ability to dimerize. Further, the structure displays a series of features that may explain the high potency of the mutant on the basis of the current model for the insulin-receptor interaction. These features are: a change in conformation of the C-terminal region of the B-chain, the absence of strong hydrogen bonds between this region and the rest of the molecule, and a relatively easy accessibility to the Val(A3) residue.

Amino Acid Sequence↗

Three-dimensional solution structure of an insulin dimer. A study of the B9(Asp) mutant of human insulin using nuclear magnetic resonance, distance geometry and restrained molecular dynamics.

The solution structure of the B9(Asp) mutant of human insulin has been determined by two-dimensional 1H nuclear magnetic resonance spectroscopy. Thirty structures were calculated by distance geometry from 451 interproton distance restraints based on intra-residue, sequential and long-range nuclear Overhauser enhancement data, 17 restraints on phi torsional angles obtained from 3JH alpha HN coupling constants, and the restraints from 17 hydrogen bonds, and the three disulphide bridges. The distance geometry structures were optimized using restrained molecular dynamics (RMD) and energy minimization. The average root-mean-square deviation for the best 20 RMD refined structures is 2.26 A for the backbone and 3.14 A for all atoms if the less well-defined N and C-terminal residues are excluded. The helical regions are better defined, with root-mean-square deviation values of 1.11 A for the backbone and 2.03 A for all atoms. The data analysis and the calculations show that B9(Asp) insulin, in water solution at the applied pH (1.8 to 1.9), is a well-defined dimer with no detectable difference between the two monomers. The association of the two monomers in the solution dimer is relatively loose as compared with the crystal dimer. The overall secondary and tertiary structures of the monomers in the 2Zn crystal hexamer is found to be preserved. The conformation-averaged NMR structures obtained for the monomer is close to the structure of molecule 1 in the hexamer of the 2Zn insulin crystal. However, minor, but significant deviations from this structure, as well as from the structure of monomeric insulin in solution, exist and are ascribed to the absence of the hexamer and crystal packing forces, and to the presence of monomer-monomer interactions, respectively. Thus, the monomer in the solution dimer shows a conformation similar to that of the crystal monomer in molecular regions close to the monomer-monomer interface, whereas it assumes a conformation similar to that of the solution structure of monomeric insulin in other regions, suggesting that B9(Asp) insulin adopts a monomer-like conformation when this is not inconsistent with the monomer-monomer arrangement in the dimer.

Crystallization↗

Characterization of tertiary interactions in a folded protein by NMR methods: studies of pH-induced structural changes in human growth hormone.

The pH-induced conformational changes in human growth hormone (hGH) have been studied, using a new quantitative NMR approach that combines 13C labeling of specific backbone carbonyl carbons with a complete spectral analysis of the corresponding 13C resonances. Thus, a complete analysis of the carbonyl resonances of the 26 Leu residues of hGH and their variation with pH provided detailed information about the equilibrium folding processes of the protein, including information about the kinetics of the folding. By combining this information with the pH dependence of readily identifiable 1H resonances, the pH-induced changes observed in the carbonyl carbon spectra can be associated with specific regions in the protein and can be ascribed to a series of localized adjustments in the tertiary structure, brought about by changes in the hydrogen bond interactions or electrostatic interactions between different residues in the globular folded protein. The preexchange lifetimes of these adjustments range from a fraction of a millisecond to a few milliseconds.

Amino Acid Sequence↗

Proton nuclear magnetic resonance study of the B9(Asp) mutant of human insulin. Sequential assignment and secondary structure.

The sequence-specific 1H nuclear magnetic resonance (n.m.r.) assignment of 49 of the 51 amino acid residues of human B9(Asp) insulin in water at low pH is reported. Spin systems were identified using a series of two-dimensional n.m.r. techniques. For the majority of the amino acid residues with unique spin systems, particularly Ala, Thr, Val, Leu, Ile and Lys, the complete spin systems were identified. Sequence-specific assignments were obtained from sequential nuclear Overhauser enhancement (NOE) connectivities. The results indicate that the solution structure of the mutant closely resembles the crystal structure of native insulin. Thus, the NOE data reveal three helical domains all consistent with the secondary structure of the native human 2Zn insulin in the crystal phase. Numerous slowly exchanging amide protons support these structural elements, and indicate a relatively stable structure of the protein. A corresponding resemblance of the tertiary structures in the two phases is also suggested by slowly exchanging amide protons, and by the extreme chemical shift values observed for the beta-protons of B15(Leu) that agree with a close contact between this residue and the aromatic rings of B24(Phe) and B26(Tyr), as found in the crystal structure of the 2Zn insulin. Finally, there are clear indications that the B9(Asp) insulin mutant exists primarily as a dimer under the given conditions.

Amino Acid Sequence↗

Structural diversity of small molecule libraries.

A novel method for assessing structural diversity is presented. Maximum common subgraph identity is used as the measure of similarity between two chemical structures. A conditional probability treatment of similarity distributions for libraries of chemical structures is used to define diversity. This evaluation method together with the evaluation of traditional physicochemical properties is used to assess a large number of chemical libraries and to understand structural differences between these.

Journal Article↗