Mobile genetic elements. Inside an intron invasion.
Explore the source record for details and available documents.
Catalysis↗
Biomedical subjects
A M Pyle
Publications and source records attributed to A M Pyle.
Catalytic role of 2'-hydroxyl groups within a group II intron active site.
Domain 5 is an essential active-site component of group II intron ribozymes. The role of backbone substituents in D5 function was explored through synthesis of a series of derivatives containing deoxynucleotides at each position along the D5 strand. Kinetic screens revealed that eight 2'-hydroxyl groups were likely to be critical for activity of D5. Through two separate methods, including competitive inhibition and direct kinetic analysis, effects on binding and chemistry were distinguished. Depending on their function, important 2'-hydroxyl groups lie on opposite faces of the molecule, defining distinct loci for molecular recognition and catalysis by D5.
Base Composition↗
Two competing pathways for self-splicing by group II introns: a quantitative analysis of in vitro reaction rates and products.
Self-splicing group II introns are found in bacteria and in the organellar genes in plants, fungi, and yeast. The mechanism for the first step of splicing is generally believed to involve attack of a specific intronic 2'-hydroxyl group on a phosphodiester linkage at the 5'-splice site, resulting in the formation of a lariat intron species. In this paper, we present kinetic and enzymatic evidence that in vitro there are two distinct pathways for group II intron self-splicing: one involves 2'-OH attack and another involves attack of water or hydroxide. These two pathways occur in parallel under all reaction conditions, although either can dominate in the presence of particular salts or protein cofactors. Both pathways are followed by a successful second step of splicing, and either pathway can be highly efficient. We find that the hydrolytic pathway prevails under physiological ionic conditions, while branching predominates at molar concentrations of ammonium ion. The intron is observed to adopt two major active conformations. In order to quantify their individual reaction rates, we applied a mechanistic model describing biphasic parallel kinetic behavior. Kinetic analysis throughout the investigation reveals that there is no coupling between the unproductive "spliced-exon-reopening" reaction (SER) and hydrolysis during the first step of splicing. Conditions that stimulate branching can promote the SER reaction just as efficiently as conditions that stimulate the hydrolytic pathway. Although there is little evidence that it exists in vivo, a hydrolytic splicing pathway for group II introns has important implications for the translation of intron-encoded proteins and the inhibition of intron migration into new genomic positions.
Ammonium Chloride↗
Role of metal ions in ribozymes.
Explore the source record for details and available documents.
Base Composition↗
Conversion of a group II intron into a new multiple-turnover ribozyme that selectively cleaves oligonucleotides: elucidation of reaction mechanism and structure/function relationships.
The self-splicing ai5g group II intron was transformed into a three-part ribozyme that site-specifically cleaves small oligonucleotide substrates with multiple turnover. The ribozyme is composed of intron domain 1 (D1, 425 nucleotides), with catalytically essential domain 5 (D5, 58 nucleotides) provided separately as a reaction cofactor. Together, the D1/D5 complex cleaves small substrates analogous in sequence to the 5'-splice site of the intron. Activity of the ribozyme was studied using a combination of single- and multiple-turnover experiments in which the concentrations of the RNA components were varied in order to probe their individual role in the overall mechanism. Values for kcat, Km, and kcat/Km were the same within experimental error for the two enzymological approaches. These kinetic analyses reveal that the ribozyme utilizes a classic Michaelis-Menten reaction mechanism in which the chemical step of catalysis (kcat = kchem = approximately 0.03 min-1 at full saturation) is rate limiting for the overall reaction. The D1/D5 complex binds tightly to the substrate (Km = 6.3 nM) and specifically recognizes sequences both 5' and 3' to the ribozyme cleavage site. These studies represent the first quantitative analysis of group II recognition and affinity for the 5'-splice site. As observed in previous studies on the role of D5 RNA, D5 binds tightly to the ternary complex (Km = 870 nM). The second-order rate constant for RNA cleavage (kcat/Km = 3.3 x 10(6)) is an order of magnitude slower than that observed for other ribozymes in this mechanistic class, all of which are rate-limited by steps other than chemistry. That kcat equals kchem in this ribozyme is supported by the overall kinetic analysis and by the observation that an Rp phosphorothioate is cleaved approximately 3-fold more slowly than a phosphate at the cleavage site. These studies represent a preliminary examination of stereochemical preference by a group II intron active site in the transition state. The substrate specificity, reaction conditions, and mutational sensitivity of this ribozyme are consistent with a reaction analogous to the first step of group II intron self-splicing, although its stereochemical preference is analogous to a second-step reversal.
Base Sequence↗
RNA folding.
The number of known motifs for RNA folding and RNA tertiary organization is expanding rapidly as we learn more about the diverse biological functions of RNA. Problems in protein and RNA folding have melded in recent investigations of ribonucleoprotein folding. Theoretical and experimental models are rapidly being developed for the pathways and stabilizing forces involved in RNA folding.
Animals↗
Branch-point attack in group II introns is a highly reversible transesterification, providing a potential proofreading mechanism for 5'-splice site selection.
By examining the first step of group II intron splicing in the absence of the second step, we have found that there is an interplay of three distinct reactions at the 5'-splice site: branching, reverse branching, and hydrolytic cleavage. This approach has yielded the first kinetic parameters describing eukaryotic branching and establishes that group II intron catalysis can proceed on a rapid timescale. The efficient reversibility of the first step is due to increased conformational organization in the branched intermediate and it has several important mechanistic implications. Reversibility in the first step requires that the second step of splicing serve as a kinetic trap, thus driving splicing to completion and coordinating the first and second step of splicing. Facile reverse branching also provides the intron with a proofreading mechanism to control the fidelity of 5'-splice site selection and it provides a kinetic basis for the apparent mobility of group II introns.
Base Sequence↗
Replacement of the conserved G.U with a G-C pair at the cleavage site of the Tetrahymena ribozyme decreases binding, reactivity, and fidelity.
There is a phylogenetically conserved G.U pair at the 5'-splice site of group I introns. When this is mutagenized to a G-C pair, splicing of these introns is greatly reduced. We have used a ribozyme derived from the Tetrahymena group I intron to compare the binding and reactivity of oligonucleotides that form either a G.U or a G-C pair at this position. Ribozyme binding of oligonucleotides at 42 degrees C was measured by native gel electrophoresis and equilibrium dialysis. Binding of GGCCCUCC (C(-1)P), which base-pairs with the ribozyme guide sequence to form a G-C at the cleavage site, was 10-fold weaker than the binding of GGCCCUCU (U(-1)P), which maintains the conserved G.U pair at the cleavage site. This is surprising since a terminal G-C enhances the binding between oligonucleotides by 20-fold relative to a terminal G.U. Thermal denaturation studies indicate that C(-1)P and several analogs with deoxy substitutions bind the guide-sequence oligonucleotide, GGAGGGAAA, as strongly as they bind the ribozyme. In contrast, U(-1)P binds 240-fold more strongly to the ribozyme than to GGAGGGAAA, a difference that is decreased by deoxy substitutions. Thus, while U(-1)P binds the ribozyme through a combination of base-pairing and specific 2-OH and other tertiary interactions, C(-1)P may bind by base-pairing alone. The substrate GGCCCUCCAAAAA (C(-1)S) is cleaved 100-fold more slowly than GGCCCUCUAAAAA (U(-1)S) and also has a higher propensity to be cleaved at the wrong nucleotide position.(ABSTRACT TRUNCATED AT 250 WORDS)
Animals↗
Building a kinetic framework for group II intron ribozyme activity: quantitation of interdomain binding and reaction rate.
Ribozyme kinetics and binding studies of a two-piece group II intron were used to mechanistically characterize a reaction analogous to the first step of RNA splicing. Domain 5 RNA (D5) catalyzes specific hydrolysis of an RNA substrate (exD123) composed of sequences surrounding the 5' exon/intron boundary. Both single- and multiple-turnover kinetic analyses produced similar values of kcat (0.04 and 0.1 min-1, respectively) and Km (270 and 190 nM, respectively) for 5' splice site hydrolysis catalyzed by D5. Base pairing is not believed to stabilize the binding of D5 to exD123, so the low Km values suggest that unusual tertiary interactions provide considerable energetic stabilization to this complex. The strength of D5-exD123 binding was confirmed using a new direct binding assay based on gel filtration chromatography. In this initial application of the assay, which systematically underestimates binding by approximately 3-fold, Kd values were obtained in relative agreement with Km. This agreement, together with agreement between kinetically determined variables, suggests that the reaction is described by a straightforward Michaelis-Menten mechanism and that kcat is the rate of the chemical step. This is supported by the log/linear pH/rate profile for kcat which has a slope = 1 up to pH 6.2, consistent with a form of general base catalysis within this linear range. The shape of the plot suggests that the active site responsible for 5' splice site hydrolysis has a pKa of > or = 7.0.
Base Sequence↗
Ribozymes: a distinct class of metalloenzymes.
Ribozymes are an important new class of metalloenzymes that have an unlikely feature: they are made entirely of ribonucleic acid (RNA). Metal ions are essential for efficient chemical catalysis by ribozymes and are often required for the stabilization of ribozyme structure. Most ribozymes catalyze reactions at phosphorus centers through one of two major mechanistic pathways, and reaction has been observed at carbon centers. Creative experiments have revealed the position of metal ions in the active site of two ribozymes. The exploitation of variable metal geometry and reactivity has expanded ribozyme chemistry and has facilitated the application of in vitro selection for the creation of novel ribozymes.
Animals↗
RNA catalysis by a group I ribozyme. Developing a model for transition state stabilization.
Explore the source record for details and available documents.
Animals↗
RNA substrate binding site in the catalytic core of the Tetrahymena ribozyme.
In catalysis by group I introns, the helix (P1) containing the RNA cleavage site must be positioned next to the guanosine binding site. We have identified a conserved adenine in the catalytic core that contributes to the stability of this arrangement and propose that it accepts a hydrogen bond from a specific 2'-OH in P1. Such base-backbone tertiary interactions may be generally important to the organization of RNA tertiary structure.
Adenine↗
Ribozyme recognition of RNA by tertiary interactions with specific ribose 2'-OH groups.
Shortened forms of the group I intron from Tetrahymena catalyse sequence-specific cleavage of exogenous oligonucleotide substrates. The association between RNA enzyme (ribozyme) and substrate is mediated by pairing between an internal guide sequence on the ribozyme and a complementary sequence on the substrate. RNA substrates and cleavage products associate with a binding energy greater than that of base-pairing by approximately 4 kcal-mol-1 (at 42 degrees C), whereas DNA associates with an energy around that expected for base-pairing. It has been proposed that the difference in binding affinity is due to specific 2'-OH groups on an RNA substrate forming stabilizing tertiary interactions with the core of the ribozyme, or that the RNA.RNA helix formed upon association of an RNA substrate and the ribozyme might be more stable than an RNA.DNA helix of the same sequence. To differentiate between these two models, chimaeric oligonucleotides containing deoxynucleotide residues at successive positions along the chain were synthesized, and their equilibrium binding constants for association with the ribozyme were measured directly by a new gel electrophoresis technique. We report here that most of the extra binding energy can be accounted for by discrete RNA-ribozyme interactions, the 2'-OH group on the sugar residue three nucleotides from the cleavage site contributing the most interaction energy. Thus, in addition to the well documented binding of RNA to RNA by base-pairing, 2'-OH groups within a duplex can also mediate association between RNA molecules.
Animals↗
Direct measurement of oligonucleotide substrate binding to wild-type and mutant ribozymes from Tetrahymena.
Like protein enzymes, RNA enzymes (ribozymes) provide specific binding sites for their substrates. We now show that equilibrium dissociation constants for complexes between the Tetrahymena ribozyme and its RNA substrates and products can be directly measured by electrophoresis in polyacrylamide gels containing divalent cations. Binding is 10(3)- to 10(4)-fold tighter (4-5 kcal/mol at 42 degrees C) than expected from base-pairing interactions alone, implying that tertiary interactions also contribute to energetic stabilization. Binding decreases with single base changes in the substrate, substitution of deoxyribose sugars, and lower Mg2+ concentration. Ca2+, which enables the ribozyme to fold but is unable to mediate efficient RNA cleavage, promotes weaker substrate binding than Mg2+. This indicates that Mg2+ has special roles in both substrate binding and catalysis. Mutagenesis of a region near the internal guide sequence disrupts substrate binding, whereas binding is not significantly affected by a mutation of the guanosine-binding site. This approach should be generally useful for analysis of ribozyme variants independent of their catalytic activities.
Animals↗
High resolution footprinting of EcoRI and distamycin with Rh(phi)2(bpy)3+, a new photofootprinting reagent.
The complex bis(phenanthrenequinone diimine)(bipyridyl)rhodium(III), Rh(phi)2(bpy)3+, cleaves DNA efficiently in a sequence-neutral fashion upon photoactivation so as to provide a novel, high resolution, chemical photofootpring reagent. Photofootprinting of two crystallographically characterized DNA-binding agents, distamycin, a small natural product which binds to DNA in the minor groove, and the endonuclease EcoRI, which binds in the major groove, gave respectively a 5-7 base pair footprint for the drug at its A6 binding site and a 10-12 base pair footprint for the enzyme centered at its recognition site (5'-GAATTC-3'). Both footprints agree closely with the crystallographic results. The photocleavage reaction can be performed using either a high intensity lamp or, conveniently, a simple transilluminator box, and the photoreaction is not inhibited by moderate concentrations of reagents which are sometimes required for examining interactions of molecules with DNA. When compared with other popular footprinting agents, the rhodium complex shows a number of distinct advantages: sequence-neutrality, high resolution, ability to footprint major as well as minor groove-binding ligands, applicability in the presence of additives such as Mg2+ or glycerol, ease of handling, and a sharply footprinted pattern. Light activated footprinting reactions furthermore offer the possibility of examining DNA-binding interactions with time resolution and within the cell.
2,2'-Dipyridyl↗