Biomedical subjects

A Mattevi

Publications and source records attributed to A Mattevi.

48 records · Page 3Linked to original sources

PubMed1995

Crystallographic and enzymatic investigations on the role of Ser558, His610, and Asn614 in the catalytic mechanism of Azotobacter vinelandii dihydrolipoamide acetyltransferase (E2p).

Dihydrolipoamide acetyltransferase (E2p) is the structural and catalytic core of the pyruvate dehydrogenase multienzyme complex. In Azotobacter vinelandii E2p, residues Ser558, His610', and Asn614' are potentially involved in transition state stabilization, proton transfer, and activation of proton transfer, respectively. Three active site mutants, S558A, H610C, and N614D, of the catalytic domain of A. vinelandii E2p were prepared by site-directed mutagenesis and enzymatically characterized. The crystal structures of the three mutants have been determined at 2.7, 2.5, and 2.6 A resolution, respectively. The S558A and H610C mutants exhibit a strongly (200-fold and 500-fold, respectively) reduced enzymatic activity whereas the substitution of Asn614' by aspartate results in a moderate (9-fold) reduced activity. The decrease in enzymatic activity of the S558A and H610C mutants is solely due to the absence of the hydroxyl and imidazole side chains, respectively, and not due to major conformational rearrangements of the protein. Furthermore the sulfhydryl group of Cys610' is reoriented, resulting in a completely buried side chain which is quite different from the solvent-exposed imidazole group of His610' in the wild-type enzyme. The presence of Asn614' in A. vinelandii E2p is exceptional since all other 18 known dihydrolipoamide acyltransferase sequences contain an aspartate in this position. We observe no difference in conformation of Asp614' in the N614D mutant structure compared with the conformation of Asn614' in the wild-type enzyme. Detailed analysis of all available structures and sequences suggests two classes of acetyltransferases: one class with a catalytically essential His-Asn pair and one with a His-Asp-Arg triad as present in chloramphenicol acetyltransferase [Leslie, A. G. W. (1990) J. Mol. Biol. 213, 167-186] and in the proposed active site models of Escherichia coli and yeast E2p.

Acetyltransferases↗

PubMed1994

Crystal structures of wild-type p-hydroxybenzoate hydroxylase complexed with 4-aminobenzoate,2,4-dihydroxybenzoate, and 2-hydroxy-4-aminobenzoate and of the Tyr222Ala mutant complexed with 2-hydroxy-4-aminobenzoate. Evidence for a proton channel and a new binding mode of the flavin ring.

The crystal structures of wild-type p-hydroxybenzoate hydroxylase from Pseudomonas fluorescens, complexed with the substrate analogues 4-aminobenzoate, 2,4-dihydroxybenzoate, and 2-hydroxy-4-aminobenzoate have been determined at 2.3-, 2.5-, and 2.8-A resolution, respectively. In addition, the crystal structure of a Tyr222Ala mutant, complexed with 2-hydroxy-4-aminobenzoate, has been determined at 2.7-A resolution. The structures have been refined to R factors between 14.5% and 15.8% for data between 8.0 A and the high-resolution limit. The differences between these complexes and the wild-type enzyme-substrate complex are all concentrated in the active site region. Binding of substrate analogues bearing a 4-amino group (4-aminobenzoate and 2-hydroxy-4-aminobenzoate) leads to binding of a water molecule next to the active site Tyr385. As a result, a continuous hydrogen-bonding network is present between the 4-amino group of the substrate analogue and the side chain of His72. It is likely that this hydrogen-bonding network is transiently present during normal catalysis, where it may or may not function as a proton channel assisting the deprotonation of the 4-hydroxyl group of the normal substrate upon binding to the active site. Binding of substrate analogues bearing a hydroxyl group at the 2-position (2,4-dihydroxybenzoate and 2-hydroxy-4-aminobenzoate) leads to displacement of the flavin ring from the active site. The flavin is no longer in the active site (the "in" conformation) but is in the cleft leading to the active site instead (the "out" conformation). It is proposed that movement of the FAD out of the active site may provide an entrance for the substrate to enter the active site and an exit for the product to leave.

4-Aminobenzoic Acid↗

PubMed1993

X-ray crystal structure of ferric Aplysia limacina myoglobin in different liganded states.

The X-ray crystal structure of the ligand-free ferric form of Aplysia limacina myoglobin (pH 6.0) has been refined at 1.7 A resolution (R = 15.1%), and its cyanide, thiocyanate and imidazole derivatives studied by difference Fourier techniques at atomic resolution. The crystallographic R-factors of the three different derivatives reported are 16.1%, 16.1% and 15.6% at 1.8 A, 2.0 A and 2.0 A resolution, respectively. The present results have been analyzed in parallel with previous crystallographic studies on the molecular structures of the fluoride and azide derivatives of ferric Aplysia limacina myoglobin. Ligand binding to the distal site of the heme pocket results in different networks of hydrogen bonds involving to various degrees the bound ligand, residue Arg(66)E10, the heme propionate III, ordered water molecules and/or protein backbone atoms from the CD region. In particular, Arg(66)E10 stabilizes the bound ligand and compensates for the absence of the hydrogen bond donor residue HisE7, commonly present in oxygen-carrying globins.

Animals↗

PubMed1993

Refined crystal structure of the catalytic domain of dihydrolipoyl transacetylase (E2p) from Azotobacter vinelandii at 2.6 A resolution.

Dihydrolipoyl transacetylase (E2p) is both structurally and functionally the central enzyme of the pyruvate dehydrogenase multienzyme complex. The crystal structure of the catalytic domain, i.e. residues 382 to 637, of Azotobacter vinelandii E2p (E2pCD) was solved by multiple isomorphous replacement and refined by energy minimization procedures. The final model contains 2182 protein atoms and 37 ordered water molecules. The R-factor is 18.7% for 10,344 reflections between 10.0 and 2.6 A resolution. The root-mean-square shift deviation from the ideal values is 0.017 A for bond lengths and 3.3 degrees for bond angles. The N-terminal residues 382 to 394 are disordered and not visible in the electron density map, otherwise all residues have well-defined density. The catalytic domain forms an oligomer of 24 subunits, having octahedral 432 symmetry. In the E2pCD crystals, the 24 subunits are related by the crystallographic symmetry. The cubic arrangement of subunits gives rise to a large hollow cube with edges of 120 A. The faces of the cube have pores of diameter of 30 A. The true building block of the cube is the E2p trimer, eight of which occupy the corners of the cube. Two levels of intermolecular contacts can be distinguished: (1) the extensive interactions between 3-fold related subunits leading to a tightly associated trimer; and (2) the interactions along the 2-fold axis leading to the assembly of the trimers into the cubic 24-mer. Each subunit has a topology similar to chloramphenicol acetyltransferase (CAT) and comprises a central beta-sheet surrounded by five alpha-helices. The comparison of the two proteins indicates a large rotation of the N-terminal residues 395 to 426 of E2pCD, which reshapes the substrate binding site and extends the interaction between threefold related subunits. The catalytic centre consists of a 30 A long channel extending from the "inner" side of the trimer to the "outer" side, where inner and outer refer to the position in the 24-meric cubic core of the pyruvate dehydrogenase complex and correspond with CoA and lipoamide binding sites, respectively. The active site is formed by the residues with the lowest mobility as indicated by the atomic B-factors. Five proline residues surround the active site.(ABSTRACT TRUNCATED AT 400 WORDS)

Acetyltransferases↗

PubMed1993

Three-dimensional structure of lipoamide dehydrogenase from Pseudomonas fluorescens at 2.8 A resolution. Analysis of redox and thermostability properties.

The structure of Pseudomonas fluorescens lipoamide dehydrogenase, a dimeric flavoenzyme with a molecular mass of 106,000 daltons, was solved by the molecular replacement method and refined to an R-factor of 19.4% at 2.8 A resolution. The root-mean-square difference from ideal values for bonds and angles is 0.019 A and 3.8 degrees, respectively. The structure is closely related to that of the same flavoprotein from Azotobacter vinelandii. The root-mean-square difference for 932 C alpha atoms is 0.64 A, with 84% sequence identity. The residues in the active site are identical, while 89% of the interface residues are the same in the two enzymes. A few structural variations provide the basis for the differences in thermostability and redox properties between the two homologous proteins. Particularly, in the A. vinelandii molecule a threonine to alanine (T452A) mutation leaves a buried carbonyl oxygen, located at the subunit interface and in proximity of the flavin ring, unpaired to any H-bond donor, probably providing an explanation for the lower stability of the A. vinelandii enzyme with respect to the P. fluorescens enzyme. Six surface loops, which previously could not be accurately positioned in the A. vinelandii structure, are well defined in P. fluorescens lipoamide dehydrogenase. On the basis of the P. fluorescens structure, the six loops could be correctly defined also in the A. vinelandii enzyme. This is an unusual case where similar refinement methodologies applied to two crystal forms of closely related proteins led to electron density maps of substantially different quality. The correct definition of these surface residues is likely to be an essential step for revealing the structural basis of the interactions between lipoamide dehydrogenase and the other members of the pyruvate dehydrogenase multienzyme complex.

Amino Acid Sequence↗

PubMed1993

Crystallographic analysis of substrate binding and catalysis in dihydrolipoyl transacetylase (E2p).

The catalytic domain of dihydrolipoyl transacetylase (E2pCD) forms the core of the pyruvate dehydrogenase multienzyme complex and catalyzes the acetyltransferase reaction using acetylCoA as acetyl donor and dihydrolipoamide (Lip(SH)2) as acceptor. The crystal structures of six complexes and derivatives of Azotobacter vinelandii E2pCD were solved. The binary complexes of the enzyme with CoA and Lip(SH)2 were determined at 2.6- and 3.0-A resolutions, respectively. The two substrates are found in an extended conformation at the two opposite entrances of the 30 A long channel which runs at the interface between two 3-fold-related subunits and forms the catalytic center. The reactive thiol groups of both substrates are within hydrogen-bond distance from the side chain of His 610. This fact supports the indication, derived from the similarity with chloramphenicol acetyl transferase, that the histidine side chain acts as general-base catalyst in the deprotonation of the reactive thiol of CoA. The conformation of Asn 614 appears to be dependent on the protonation state of the active site histidine, whose function as base catalyst is modulated in this way. Studies on E2pCD soaked in a high concentration of dithionite lead to the structure of the binary complex between E2pCD and hydrogen sulfite solved at 2.3-A resolution. It appears that the anion is bound in the middle of the catalytic center and is therefore capable of hosting and stabilizing a negative charge, which is of special interest since the reaction catalyzed by E2pCD is thought to proceed via a negatively charged tetrahedral intermediate. The structure of the binary complex between E2pCD and hydrogen sulfite suggests that transition-state stabilization can be provided by a direct hydrogen bond between the side chain of Ser 558 and the oxy anion of the putative intermediate. In the binary complex with CoA, the hydroxyl group of Ser 558 is hydrogen bonded to the nitrogen atom of one of the two peptide-like units of the substrate. Thus, CoA itself is involved in keeping the Ser hydroxyl group in the proper position for transition-state stabilization. Quite unexpectedly, the structure at 2.6-A resolution of a ternary complex in which CoA and Lip(SH)2 are simultaneously bound to E2pCD reveals that CoA has an alternative, nonproductive binding mode. In this abortive ternary complex, CoA adopts a helical conformation with two intramolecular hydrogen bonds and the reactive sulfur of the pantetheine arm positioned 12 A away from the active site residues involved in the transferase reaction.(ABSTRACT TRUNCATED AT 400 WORDS)

Acetyltransferases↗

PubMed1992

Atomic structure of the cubic core of the pyruvate dehydrogenase multienzyme complex.

The highly symmetric pyruvate dehydrogenase multienzyme complexes have molecular masses ranging from 5 to 10 million daltons. They consist of numerous copies of three different enzymes: pyruvate dehydrogenase, dihydrolipoyl transacetylase, and lipoamide dehydrogenase. The three-dimensional crystal structure of the catalytic domain of Azotobacter vinelandii dihydrolipoyl transacetylase has been determined at 2.6 angstrom (A) resolution. Eight trimers assemble as a hollow truncated cube with an edge of 125 A, forming the core of the multienzyme complex. Coenzyme A must enter the 29 A long active site channel from the inside of the cube, and lipoamide must enter from the outside. The trimer of the catalytic domain of dihydrolipoyl transacetylase has a topology identical to chloramphenicol acetyl transferase. The atomic structure of the 24-subunit cube core provides a framework for understanding all pyruvate dehydrogenase and related multienzyme complexes.

Amino Acid Sequence↗

PubMed1992

The refined crystal structure of Pseudomonas putida lipoamide dehydrogenase complexed with NAD+ at 2.45 A resolution.

The three-dimensional structure of one of the three lipoamide dehydrogenases occurring in Pseudomonas putida, LipDH Val, has been determined at 2.45 A resolution. The orthorhombic crystals, grown in the presence of 20 mM NAD+, contain 458 residues per asymmetric unit. A crystallographic 2-fold axis generates the dimer which is observed in solution. The final crystallographic R-factor is 21.8% for 18,216 unique reflections and a model consisting of 3,452 protein atoms, 189 solvent molecules and 44 NAD+ atoms, while the overall B-factor is unusually high: 47 A2. The structure of LipDH Val reveals the conformation of the C-terminal residues which fold "back" into the putative lipoamide binding region. The C-terminus has been proven to be important for activity by site-directed mutagenesis. However, the distance of the C-terminus to the catalytically essential residues is surprisingly large, over 6 A, and the precise role of the C-terminus still needs to be elucidated. In this crystal form LipDH Val contains one NAD+ molecule per subunit. Its adenine-ribose moiety occupies an analogous position as in the structure of glutathione reductase. However, the nicotinamide-ribose moiety is far removed from its expected position near the isoalloxazine ring and points into solution. Comparison of LipDH Val with Azotobacter vinelandii lipoamide dehydrogenase yields an rms difference of 1.6 A for 440 well defined C alpha atoms per subunit. Comparing LipDH Val with glutathione reductase shows large differences in the tertiary and quaternary structure of the two enzymes. For instance, the two subunits in the dimer are shifted by 6 A with respect to each other. So, LipDH Val confirms the surprising differences in molecular architecture between glutathione reductase and lipoamide dehydrogenase, which were already observed in Azotobacter vinelandii LipDH. This is the more remarkable since the active sites are located at the subunit interface and are virtually identical in all three enzymes.

Amino Acid Sequence↗

PubMed1991

The catalytic domain of the dihydrolipoyl transacetylase component of the pyruvate dehydrogenase complex from Azotobacter vinelandii and Escherichia coli. Expression, purification, properties and preliminary X-ray analysis.

Partial sequences of the dihydrolipoyl transacetylase component (E2p) of the pyruvate dehydrogenase complex from Azotobacter vinelandii and Escherichia coli, containing the catalytic domain, were cloned in pUC plasmids and over-expressed in E. coli TG2. A high expression of a homogeneous protein was only detectable for E2p mutants consisting of the catalytic domain and the alanine-proline-rich sequence between a putative binding region for the peripheral components and the catalytic domain (apa-4). Most of the catalytic domain from A. vinelandii without the apa-4 sequence was degraded intracellularly, probably due to incorrect folding. Fusion proteins of six amino acids from beta-galactosidase, the apa-4 region and the catalytic domains of A. vinelandii or E. coli E2p could be highly purified. Both catalytic domains were assembled in 24-subunit structures with a molecular mass of approximately 670 kDa. The expression of catalytic domain from A. vinelandii E2p is more than twice as high as found for wild-type E2p. This can be explained by intracellular degradation of over-expressed wild-type E2p, whereas the catalytic domains are stable against proteolysis in vivo and in vitro. The interaction of the peripheral components pyruvate dehydrogenase (E1p) and dihydrolipoamide dehydrogenase (E3) with the catalytic domains was studied, using gel filtration on Superose-6 and sedimentation velocity experiments. No binding of either E1p or E3 to the catalytic domain of either organism was detectable. Crystals of the catalytic domain of A. vinelandii E2p could be grown to a maximum size of 0.6 x 0.6 x 0.4 mm. They diffract up to a resolution of 0.28 nm.

Acetyltransferases↗

PubMed1991

Refined crystal structure of lipoamide dehydrogenase from Azotobacter vinelandii at 2.2 A resolution. A comparison with the structure of glutathione reductase.

The structure of lipoamide dehydrogenase from Azotobacter vinelandii has been refined by the molecular dynamics technique to an R-factor of 19.8% at 2.2 A resolution. In the final model, the root-mean-square deviation from ideality is 0.02 A for bond lengths and 3.2 degrees for bond angles. The asymmetric unit comprises two subunits, each consisting of 466 amino acid residues and the prosthetic group FAD, plus 512 solvent molecules. The last ten amino acid residues of both chains are not visible in the electron density distribution and they are probably disordered. The operation required to superimpose the two chains forming the dimer is a rotation of exactly 180 degrees with no translation component. The final model shows the two independently refined subunits to be very similar, except for six loops located at the surface of the molecule. The structure of each subunit of the enzyme consists of four domains with the catalytic centre located at the subunit interface. The reactive disulphide bridge, 48-53, is oxidized with S gamma of Cys53 located 3.5 A away from carbon C-4a of the isoalloxazine ring. The side-chain of His450' points its N epsilon 2 towards S gamma of Cys48 and is hydrogen bonded to the carboxylate of Glu455'. The FAD is bound in an extended conformation and the isoalloxazine ring is not completely planar with an angle between the pteridine and the benzene ring of 7.3 degrees in the first subunit and of 12.1 degrees in the second one. The overall folding of lipoamide dehydrogenase is very similar to that of glutathione reductase. However, a comparison of the two enzymes, which have only 26% sequence identity, reveals significant conformational differences. These concern the tertiary as well as the quaternary structure of the two molecules. In each subunit of lipoamide dehydrogenase the NAD-binding domain and the interface domain appear to be differently oriented with respect to the FAD-binding domain by 7.1 degrees and 7.8 degrees, respectively. The interface domain contains, in addition, major changes in tertiary structure. Furthermore, the two subunits forming the dimer appear to be shifted with respect to each other by more than 4 A, when the lipoamide dehydrogenase dimer is compared with that of glutathione reductase. In spite of all these changes at the tertiary and quaternary level the active sites of the enzymes, which occur at the dimer interface, appear to be remarkably similar.(ABSTRACT TRUNCATED AT 400 WORDS)

Azotobacter↗

PubMed1991

Binding mode of azide to ferric Aplysia limacina myoglobin. Crystallographic analysis at 1.9 A resolution.

The binding mode of azide to the ferric form of Aplysia limacina myoglobin has been studied by X-ray crystallography. The three-dimensional structure of the complex has been refined at 1.9 A resolution to a crystallographic R-factor of 13.9%, including 126 ordered solvent molecules. Azide binds to the heme iron, at the sixth co-ordination position, and is oriented towards the outer part of the distal site crevice. This orientation is stabilized by an ionic interaction with the side-chain of Arg66 (E10) which, from an outer orientation in the 'aquo-met' ligand-free myoglobin, folds back towards the distal site in the presence of the anionic ligand. In the absence of a hydrogen bond donor residue at the distal E7 position in Aplysia limacina myoglobin, a different polar residue, Arg66 at the E10 topological position, has been selected by molecular evolution in order to grant ligand stabilization.

Animals↗

PubMed1990

Engineering of microheterogeneity-resistant p-hydroxybenzoate hydroxylase from Pseudomonas fluorescens.

By site-directed mutagenesis, Cys-116 was converted to Ser-116 in p-hydroxybenzoate hydroxylase (EC 1.14.13.2) from Pseudomonas fluorescens. In contrast to wild-type enzyme, the C116S mutant is no longer susceptible to oxidation by hydrogen peroxide and shows no reactivity towards 5,5'-dithiobis(2-nitrobenzoate). Crystals of the C116S mutant are isomorphous with the crystal form of wild-type enzyme. A difference electron density confirms the mutation made.

4-Hydroxybenzoate-3-Monooxygenase↗