Biomedical subjects

A Pizzariello

Publications and source records attributed to A Pizzariello.

4 recordsLinked to original sources

PubMed2002

A glucose/hydrogen peroxide biofuel cell that uses oxidase and peroxidase as catalysts by composite bulk-modified bioelectrodes based on a solid binding matrix.

An improved composite bulk-modified bioelectrode setup based on a solid binding matrix (SBM) has been used to develop a glucose/hydrogen peroxide biofuel cell. Fuel is combined through a catalytically promoted reaction with oxygen into and oxidized species and electricity. The present work explores the feasibility of a sugar-feed biofuel cell based on SBM technology. The biofuel cell that utilizes mediators as electron transporters from the glucose oxidation pathway of the enzyme directly to electrodes is considered in this work. The anode was a glucose oxidase (GOx, EC 1.1.3.4)/ferrocene-modified SBM/graphite composite electrode. The cathode was a horseradish peroxidase (HRP, EC 1.11.1.7)/ferrocene-modified SBM/graphite composite electrode. The composite transducer material was layered on a wide polymeric surface to obtain the biomodified electrodic elements, anodes and cathodes and were assembled into a biofuel cell using glucose and H(2)O(2) as the fuel substrate and the oxidizer. The electrochemical properties and the characteristics of single composite bioelectrodes are described. The open-circuit voltage of the cell was 0.22 V, and the power output of the cell was 0.15 microW/cm(2) at 0.021 V. The biofuel cell proved to be stable for an extended period of continuous work (30 days). The reproducibility of the biotransducers fabrication was also investigated. In addition, an application of presented biofuel cell, e.g. the use of hydrolyzed corn syrup as renewable biofuels, was discussed.

Electrodes↗

PubMed2000

Selective and sensitive biosensor for theophylline based on xanthine oxidase electrode.

Milk and microbial xanthine oxidases (XOs) were used for the construction of amperometric enzyme electrodes. Substrate specificity differences of these enzymes were studied. Of the two enzymes, only the microbial XO was found to oxidize theophylline, but not theobromine and caffeine. The substrate specificity of microbial XO was affected by pH, where the optimum for xanthine was 5.5, while for theophylline it was in the range from 6.5 to 8.5. The theophylline biosensor showed a low detection limit of 2 x 10(-7) M and signal linearity up to 5 x 10(-5) M. The sensitivity of the microbial XO electrode to theophylline could be selectively eliminated by immersion in alkaline phosphate solution, thus allowing for the construction of a blank electrode for differential measurements. The feasibility of this approach has been demonstrated by the determination of free (unbound) and total theophylline in blood samples. The biosensor exhibited good operational (>6 h) and shelf (>3 months) stability when trehalose was used as a stabilizer of the biocatalytic layer.

Biosensing Techniques↗

PubMed1998

Amperometric biosensors based on solid binding matrices applied in food quality monitoring.

Solid binding matrix (SBM) based composite transducers have been used for development of series of multibiosensor systems applicable in various fields. Here we present two hybrid three-channel multibiosensors for simultaneous amperometric operation in food quality control, i.e. glucose/fructose/ethanol multibiosensor, based on glucose oxidase/fructose dehydrogenase/alcohol dehydrogenase surface-modified enzyme electrodes and L-lactate/L-malate/sulfite multibiosensor, based on L-lactate dehydrogenase/L-malate dehydrogenase/sulfite oxidase surface-modified enzyme electrodes. Different parameters have been studied in order to optimize the response of the multibiosensor systems. The multibiosensor showed a good sensitivity, linear range and storage stability. The multibiosensors were used for the determination of glucose, fructose, ethanol, L-lactate, L-malate and sulfite in samples of wine, resulting in a good agreement with data certified by the supplier. Comparison of various designs, surface-modified, bulk-modified and thick-cover, of SBM based biosensors is studied on the example of fructose biosensor.

Biosensing Techniques↗

PubMed1998

Continuous flow immunosensor for atrazine detection.

The hapten atrazine was detected under continuous flow conditions using a micro-column which contained immobilized monoclonal antibodies (Ab) against atrazine and atrazine labeled with alkaline phosphatase (An*). The equilibrium of the antibody-hapten system, was achieved by a continuous flow of the tracer An* through the micro-column containing the immobilized antibodies. The activity of the tracer was monitored continuously, after the micro-column, by an amperometric detector using p-hydroquinone phosphate as substrate. When pulses of unlabeled atrazine (An) were added to the An* flowing continuously through the micro-column, An* bound to the antibody was displaced, with a consequent change of the detector signal. By this method atrazine concentrations in the range 9-180 micrograms/l were monitored under conditions of continuous operation. Since the equilibrium condition for the system Ab-An* was continuously restored by the flow of An* through the micro-column the regeneration of the antibody was not required.

Animals↗