PubMed Health⌕ Search

Biomedical subjects

A S Ladokhin

Publications and source records attributed to A S Ladokhin.

At least 19 recordsLinked to original sources

'Detergent-like' permeabilization of anionic lipid vesicles by melittin.

Melittin (MLT), the 26-residue toxic peptide from the European honeybee Apis mellifera, is widely used for studying the principles of membrane permeabilization by antimicrobial and other host-defense peptides. A striking property of MLT is that its ability to permeabilize zwitterionic phospholipid vesicles is dramatically reduced upon the addition of anionic lipids. Because the mechanism of permeabilization may be fundamentally different for the two types of lipids, we examined MLT-induced release of entrapped fluorescent dextran markers of two different molecular masses (4 and 50 kDa) from anionic palmitoyloleoylphosphatidylglycerol (POPG) vesicles. Unlike release from palmitoyloleoylphosphatidylcholine (POPC) vesicles, which is highly selective for the 4 kDa marker, implying release through pores of about 25 A diameter [Ladokhin et al., Biophys. J. 72 (1997) 1762], release from POPG vesicles was found to be non-selective, i.e., 'detergent-like'. Oriented circular dichroism measurements of MLT in oriented POPG and POPC multilayers disclosed that alpha-helical MLT can be induced to adopt a transbilayer orientation in POPC multilayers, but not in POPG multilayers. The apparent inhibition of MLT permeabilization by anionic membranes may thus be due to suppression of translocation ability.

Circular Dichroism↗

Protein chemistry at membrane interfaces: non-additivity of electrostatic and hydrophobic interactions.

Non-specific binding of proteins and peptides to charged membrane interfaces depends upon the combined contributions of hydrophobic (DeltaG(HPhi)) and electrostatic (DeltaG(ES)) free energies. If these are simply additive, then the observed free energy of binding (DeltaG(obs)) will be given by DeltaG(obs)=DeltaG(HPhi)+DeltaG(ES), where DeltaG(HPhi)=-sigma(NP)A(NP) and DeltaG(ES)=zFphi. In these expressions, A(NP) is the non-polar accessible area, sigma(NP) the non-polar solvation parameter, z the formal peptide valence, F the Faraday constant, and phi the membrane surface potential. But several lines of evidence suggest that hydrophobic and electrostatic binding free energies of proteins at membrane interfaces, such as those associated with cell signaling, are not simply additive. In order to explore this issue systematically, we have determined the interfacial partitioning free energies of variants of indolicidin, a cationic proline-rich antimicrobial peptide. The synthesized variants of the 13 residue peptide covered a wide range of hydrophobic free energies, which allowed us to examine the effect of hydrophobicity on electrostatic binding to membranes formed from mixtures of neutral and anionic lipids. Although DeltaG(obs) was always a linear function of DeltaG(HPhi), the slope depended upon anionic lipid content: the slope was 1.0 for pure, zwitterionic phosphocholine bilayers and 0.3 for pure phosphoglycerol membranes. DeltaG(obs) also varied linearly with surface potential, but the slope was smaller than the expected value, zF. As observed by others, this suggests an effective peptide valence z(eff) that is smaller than the formal valence z. Because of our systematic approach, we were able to establish a useful rule-of-thumb: z(eff) is reduced relative to z by about 20 % for each 3 kcal mol(-1) (1 kcal=4.184 kJ) favorable increase in DeltaG(HPhi). For neutral phosphocholine interfaces, we found that DeltaG(obs) could be predicted with remarkable accuracy using the Wimley-White experiment-based interfacial hydrophobicity scale.

Amino Acid Sequence↗

How to measure and analyze tryptophan fluorescence in membranes properly, and why bother?

Tryptophan fluorescence is a powerful tool for studying protein structure and function, especially membrane-active proteins and peptides. It is arguably the most frequently used tool for examining the interactions of proteins and peptides with vesicular unilamellar model membranes. However, high light scattering associated with vesicular membrane systems presents special challenges. Because of their reduced light scattering compared to large unilamellar vesicles (LUV), small unilamellar vesicles (SUV) produced by sonication are widely used membrane models. Unfortunately, SUV, unlike LUV, are metastable and consequently unsuitable for equilibrium thermodynamic measurements. We present simple and easily implemented experimental procedures for the accurate determination of tryptophan (Trp) fluorescence in either LUV or SUV. Specifically, we show that Trp spectra can be obtained in the presence of up to 6 mM LUV that are virtually identical to spectra obtained in buffer alone, which obviates the use of SUV. We show how the widths and peak positions of such spectra can be used to evaluate the heterogeneity of the membrane conformation and penetration of peptides. Finally, we show how to use a reference fluorophore for the correction of intensity measurements so that the energetics of peptide partitioning into membranes can be accurately determined.

Fluorescence↗

Formation and characterization of a single Trp-Trp cross-link in indolicidin that confers protease stability without altering antimicrobial activity.

Indolicidin is a 13-residue cationic, antimicrobial peptide-amide isolated from the cytoplasmic granules of bovine neutrophils. The unique composition of indolicidin distinguishes it from alpha-helical and beta-structured cationic peptides, because five of indolicidin's 13 residues are tryptophans: H-Ile-Leu-Pro-Trp-Lys-Trp-Pro-Trp-Trp-Pro-Trp-Arg-Arg-NH(2). Solid phase synthesis of indolicidin gave rise to a minor byproduct that possessed unusual fluorescence and UV absorbance properties compared with authentic indolicidin. The byproduct was purified by combined ion exchange and reversed phase high pressure liquid chromatography steps and was shown be identical to authentic indolicidin in its microbicidal activity against Staphylococcus aureus, Escherichia coli, Candida albicans, and Cryptococcus neoformans. Mass analysis of the byproduct revealed a 2-atomic mass unit reduction compared with indolicidin, suggesting the deprotonation of two indole side chains to form an intrachain delta(1),delta(1)'-ditryptophan derivative. We confirmed the nature of the cross-linked byproduct, termed X-indolicidin, by absorbance and fluorescence spectroscopy, peptide mapping, and sequence analysis. Edman degradation revealed that Trp-6 and Trp-9 were covalently cross-linked. Compared with indolicidin, X-indolicidin was partially resistant to digestion with trypsin and chymotrypsin, suggesting that the ditryptophan stabilizes a subset of molecular conformations that are protease resistant but that are absent in the native structure.

Amino Acid Sequence↗

Evaluation of lipid exposure of tryptophan residues in membrane peptides and proteins.

Fluorescence quenching is used to gain information on the exposure of tryptophan residues to lipid in membrane-bound proteins and peptides. A protocol is developed to calculate this exposure, based on a comparison of quenching efficiency and of a fluorescence lifetime (or quantum yield) measured for a protein and for a model tryptophan-containing compound. Various methods of analysis of depth-dependent quenching are compared and three universal measures of quenching profile are derived. One of the measures, related to the area under profile, is used to estimate quenching efficiency. The method is applied to single tryptophan mutants of a membrane-anchoring nonpolar peptide of cytochrome b(5) and of an outer membrane protein A. Analysis of quenching of the cytochrome's nonpolar peptide by a set of four brominated lipids reveals a temperature-controlled reversible conformational change, resulting in increased exposure of tryptophan to lipid and delocalization of its transverse position. Kinetic quenching profiles and fluorescence binding kinetics reported by Kleinschmidt et al. (Biochemistry (1999) 38, 5006-5016) were analyzed to extract information on the relative exposure of tryptophan residues during folding of an outer membrane protein A. Trp-102, which translocates across the bilayer, was found to be noticeably shielded from the lipid environment throughout the folding event compared to Trp-7, which remains on the cis side. The approach described here provides a new tool for studies of low-resolution structure and conformational transitions in membrane proteins and peptides.

Bacterial Outer Membrane Proteins↗

CD spectra of indolicidin antimicrobial peptides suggest turns, not polyproline helix.

Indolicidin is a 13-residue antimicrobial peptide-amide isolated from the cytoplasmic granules of bovine neutrophils that contains five Trp and three Pro residues. Falla et al. [(1996) J. Biol. Chem. 271, 19298] suggested that indolicidin forms a poly-L-proline II helix based upon the circular dichroism (CD) spectra of a closely related peptide (indolicidin methyl ester). In contrast, we found no evidence of poly-L-proline II helix formation in the CD spectra of native indolicidin in various solvents or when bound to micelles and membranes [Ladokhin et al. (1997) Biophys. J. 72, 794]. We interpreted the spectra as arising from unordered and/or beta-turn structures, but noted a sharp negative band at 227 nm arising from the tryptophan residues that would mask spectral features characteristic of poly-L-proline II helix. We have reexamined this issue by means of CD measurements of native indolicidin and several of its analogues. None of the features characteristic of a poly-L-proline helix (or alpha- or 3(10)-helix) were observed for any of the peptides studied. To eliminate artifacts associated with tryptophan, we synthesized indolicidin-L and indolicidin-F in which all five tryptophans were replaced with leucines or phenylalanines, respectively. The changes in CD spectra of these Trp-free peptides upon transfer into membrane-like environments were found to be consistent with the formation of beta-turns. For the native indolicidin in SDS micelles, temperature increases resulted in a coupled diminution of two sharp bands, a negative one at 227 nm and a positive one at 217 nm. This phenomenon, which is absent in indolicidin-L variants with single Leu-->Trp substitutions, is consistent with exciton splitting produced by the stacking of indole rings. Type VI turns in model peptides in aqueous solution are known to be promoted by stacking interactions between cis-proline and neighboring aromatic residues [Yao et al. (1994) J. Mol. Biol. 243, 754]. Molecular modeling of indolicidin with a -Trp(6)-cis-Pro(7)-Trp(8)- type VIa turn demonstrated the feasibility of this turn conformation and revealed the possibility of an accompanying amphipathic structure. We therefore suggest that turn conformations are the principal structural motif of indolicidin and that these turns greatly enhance membrane activity.

Animals↗

Folding of amphipathic alpha-helices on membranes: energetics of helix formation by melittin.

Membranes have a potent ability to promote secondary structure formation in a wide range of membrane-active peptides, believed to be due to a reduction through hydrogen bonding of the energetic cost of partitioning peptide bonds. This process is of fundamental importance for understanding the mechanism of action of toxins and antimicrobial peptides and the stability of membrane proteins. A classic example of membrane-induced folding is the bee-venom peptide melittin that is largely unstructured when free in solution, but strongly adopts an amphipathic alpha-helical conformation when partitioned into membranes. We have determined the energetics of melittin helix formation through measurements of the partitioning free energies and the helicities of native melittin and of a diastereomeric analog with four d-amino acids (d4,l-melittin). Because D4,l-melittin has little secondary structure in either the free or bound forms, it serves as a model for the experimentally inaccessible unfolded bound form of native melittin. The partitioning of native melittin into large unilamellar phosphocholine vesicles is 5.0(+/-0.7) kcal mol-1 more favorable than the partitioning of d4,l-melittin (1 cal=4.186 J). Differences in the circular dichroism spectra of the two forms of melittin indicate that bound native melittin is more helical than bound d4, l-melittin by about 12 residues. These findings disclose that the free energy reduction per residue accompanying the folding of melittin in membrane interfaces is about 0.4 kcal mol-1, consistent with the hypothesis that hydrogen bonding reduces the high cost of partitioning peptide bonds. A value of 0.6 kcal mol-1 per residue has been observed for beta-sheet formation by a hexapeptide model system. These two values provide a useful rule of thumb for estimating the energetic consequences of membrane-induced secondary structure formation.

Amino Acid Sequence↗

Analysis of protein and peptide penetration into membranes by depth-dependent fluorescence quenching: theoretical considerations.

Depth-dependent fluorescence quenching in membranes is playing an increasingly important role in the determination of the low resolution structure of membrane proteins. This paper presents a graphical way of visualizing membrane quenching caused by lipid-attached bromines or spin labels with the help of a depth-dependent fluorescence quenching profile. Two methods are presently available to extract information on membrane penetration from quenching: the parallax method (PM; ) and distribution analysis (DA; A. S. Biophys. J. 64:290a (Abstr.); A. S. Methods Enzymol. 278:462-473). Analysis of various experimental and simulated data by these two methods is presented. The effects of uncertainty in the local concentration of quenching lipids (due to protein shielding or nonideality in lipid mixing), the existence of multiple conformations of membrane-bound protein, incomplete binding, and uncertainty in the fluorescence in nonquenching lipid are described. Regardless of the analytical form of the quenching profile (Gaussian function for DA or truncated parabola for PM), it has three primary characteristics: position on the depth scale, area, and width. The most important result, not surprisingly, is that one needs three fitting parameters to describe the quenching. This will keep the measures of the quenching profile independent of each other resulting in the reduction of systematic errors in depth determination. This can be achieved by using either DA or a suggested modification of the PM that introduces a third parameter related to quenching efficiency. Because DA utilizes a smooth fitting function, it offers an advantage for the analysis of deeply penetrating probes, where the effects of transleaflet quenching should be considered.

Fluorescence↗

Folding of beta-sheet membrane proteins: a hydrophobic hexapeptide model.

Beta-sheets, in the form of the beta-barrel folding motif, are found in several constitutive membrane proteins (porins) and in several microbial toxins that assemble on membranes to form oligomeric transmembrane channels. We report here a first step towards understanding the principles of beta-sheet formation in membranes. In particular, we describe the properties of a simple hydrophobic hexapeptide, acetyl-Trp-Leu5 (AcWL5), that assembles cooperatively into beta-sheet aggregates upon partitioning into lipid bilayer membranes from the aqueous phase where the peptide is strictly monomeric and random coil. The aggregates, containing 10 to 20 monomers, undergo a relatively sharp and reversible thermal unfolding at approximately 60 degreesC. No pores are formed by the aggregates, but they do induce graded leakage of vesicle contents at very high peptide to lipid ratios. Because beta-sheet structure is not observed when the peptide is dissolved in n-octanol, trifluoroethanol or sodium dodecyl sulfate micelles, aggregation into beta-sheets appears to be an exclusive property of the peptide in the bilayer membrane interface. This is an expected consequence of the hypothesis that a reduction in the free energy of partitioning of peptide bonds caused by hydrogen bonding drives secondary structure formation in membrane interfaces. But, other features of interfacial partitioning, such as side-chain interactions and reduction of dimensionality, must also contribute. We estimate from our partitioning data that the free energy reduction per residue for aggregation is about 0.5 kcal mol-1. Although modest, its aggregate effect on the free energy of assembling beta-sheet proteins can be huge. This surprising finding, that a simple hydrophobic hexapeptide readily assembles into oligomeric beta-sheets in membranes, reveals the potent ability of membranes to promote secondary structure in peptides, and shows that the formation of beta-sheets in membranes is more facile than expected. Furthermore, it provides a basis for understanding the observation that membranes promote self-association of beta-amyloid peptides. AcWL5 and related peptides thus provide a good starting point for designing peptide models for exploring the principles of beta-sheet formation in membranes.

Circular Dichroism↗

Evidence for the formation of an unusual ternary complex of rabbit liver EF-1alpha with GDP and deacylated tRNA.

Eukaryotic translation elongation factor 1alpha is known to interact in GTP-bound form with aminoacyl-tRNA promoting its binding to the ribosome. In this paper another ternary complex [EF-1alpha*GDP*deacylated tRNA], never considered in widely accepted elongation schemes, is reported for the first time. The formation of this unusual complex, postulated earlier (FEBS Lett. (1996) 382, 18-20), has been detected by four independent methods. [EF-1alpha*GDP]-interacting sites are located in the acceptor stem, TpsiC stem and TpsiC loop of tRNA(Phe) and tRNA(Leu) molecules. Both tRNA and EF-1alpha are found to undergo certain conformational changes during their interaction. The ability of EF-1alpha to form a complex with deacylated tRNA indicates that the factor may perform an important role in tRNA and aminoacyl-tRNA channeling in higher eukaryotic cells.

Animals↗

Bilayer interactions of indolicidin, a small antimicrobial peptide rich in tryptophan, proline, and basic amino acids.

Tryptophan, proline, and basic amino acids have all been implicated as being important in the assembly and structure of membrane proteins. Indolicidin, an antimicrobial 13-residue peptide-amide isolated from the cytoplasmic granules of bovine neutrophils, is highly enriched in these amino acids: five tryptophans, three prolines, three basic residues, and no acidic residues. Consistent with the likely importance of these amino acids in membrane protein assembly, indolicidin is known to be highly membrane-active and is believed to act by disruption of cell membranes. We have, therefore, examined the interactions of native indolicidin with large unilamellar vesicles (LUV) formed from palmitoyloleoylphosphatidylcholine (POPC), and palmitoyloleoylphosphatidylglycerol (POPG), in order to use it as a model system for studying membrane protein insertion and for evaluating the relative contributions of hydrophobic and electrostatic forces in peptide-bilayer interactions. Equilibrium dialysis measurements indicate that indolicidin binds strongly, but reversibly, to both neutral POPC and anionic POPG vesicles with free energies of transfer of -8.8 +/- 0.2 and -11.5 +/- 0.4 kcal/mol, respectively. The extremely strong partitioning into POPG vesicles necessitated the development of a new equilibrium dialysis method that is described in detail. Tryptophan fluorescence measurements show that indolicidin is located in the bilayer interface and that indole fluorescence is affected by the type of lipid used to form the LUVs. Circular dichroism (CD) measurements reveal unordered conformations in aqueous and bulk organic solutions and a somewhat more ordered, but not alpha-helical, conformation in SDS micelles and lipid bilayers. Fluorescence requenching measurements (Ladokhin et al. 1995. Biophys. J. 69:1964-1971) on vesicles loaded with the fluorophore/quencher pair 8-aminonapthalene-1,3,6 trisulfonic acid (ANTS)/p-xylene-bis-pyridinium bromide (DPX), show that indolicidin induces membrane permeabilization. For anionic POPG, leakage is graded with a high preference for the release of cationic DPX over anionic ANTS. For neutral POPC vesicles no such preference is observed. Leakage induction is more effective with POPG vesicles than with POPC vesicles, as judged by three quantitative measures that are developed in the Appendix.

Animals↗

Sizing membrane pores in lipid vesicles by leakage of co-encapsulated markers: pore formation by melittin.

Many toxins and antimicrobial peptides permeabilize membrane vesicles by forming multimeric pores. Determination of the size of such pores is an important first step for understanding their structure and the mechanism of their self-assembly. We report a simple method for sizing pores in vesicles based on the differential release of co-encapsulated fluorescently labeled dextran markers of two different sizes. The method was tested using the bee venom peptide melittin, which was found to form pores of 25-30 A diameter in palmitoyloleoylphosphatidylcholine (POPC) vesicles at a lipid-to-peptide ratio of 50. This result is consistent with observations on melittin pore formation in erythrocytes (Katsu, T., C. Ninomiya, M. Kuroko, H. Kobayashi, T. Hirota, and Y. Fujita 1988. Action mechanism of amphipathic peptides gramicidin S and melittin on erythrocyte membrane Biochim. Biophys. Acta. 939:57-63).

Chromatography, Gel↗

Fluorescence of membrane-bound tryptophan octyl ester: a model for studying intrinsic fluorescence of protein-membrane interactions.

The fluorescence of a membrane-bound tryptophan derivative (tryptophan octyl ester, TOE) has been examined as a model for tryptophan fluorescence from proteins in membrane environments. The depth-dependent fluorescence quenching of TOE by brominated lipids was found to proceed via a dynamic mechanism with vertical fluctuations playing a central role in the process. The activation energy for the quenching was estimated to be 1.3 kcal/mole. The data were analyzed using the distribution analysis (DA) method, which extends the conventional parallax method to account more realistically for the transbilayer distributions of both probe and quencher and for possible variations in the probe's accessibility. DA provides a better fit than the parallax method to data collected with TOE in membranes formed of lipids brominated at either the 4,5, the 6,7, the 9,10, or the 11,12 positions of the sn-2 acyl chain. DA yields information on the fluorophore's most probable depth in the membrane, its conformational heterogeneity, and its accessibility to the lipid phase. Previously reported data on cytochrome b5 and melittin were reanalyzed together with data obtained with TOE. This new analysis demonstrates conformational heterogeneity in melittin and provides estimates of the freedom of motion and exposure to the lipid phase of membrane-embedded tryptophans of cytochrome b5.

Binding Sites↗