PubMed Health⌕ Search

Biomedical subjects

A S Zasedatelev

Publications and source records attributed to A S Zasedatelev.

At least 19 recordsLinked to original sources

Kinetics of hybridization on surface oligonucleotide microchips: theory, experiment, and comparison with hybridization on gel-based microchips.

The optimal design of oligonucleotide microchips and efficient discrimination between perfect and mismatch duplexes strongly depend on the external transport of target DNA to the cells with immobilized probes as well as on respective association and dissociation rates at the duplex formation. In this paper we present the relevant theory for hybridization of DNA fragments with oligonucleotide probes immobilized in the cells on flat substrate. With minor modifications, our theory also is applicable to reaction-diffusion hybridization kinetics for the probes immobilized on the surface of microbeads immersed in hybridization solution. The main theoretical predictions are verified with control experiments. Besides that, we compared the characteristics of the surface and gel-based oligonucleotide microchips. The comparison was performed for the chips printed with the same pin robot, for the signals measured with the same devices and processed by the same technique, and for the same hybridization conditions. The sets of probe oligonucleotides and the concentrations of probes in respective solutions used for immobilization on each platform were identical as well. We found that, despite the slower hybridization kinetics, the fluorescence signals and mutation discrimination efficiency appeared to be higher for the gel-based microchips with respect to their surface counterparts even for the relatively short hybridization time about 0.5-1 hour. Both the divergence between signals for perfects and the difference in mutation discrimination efficiency for the counterpart platforms rapidly grow with incubation time. In particular, for hybridization during 3 h the signals for gel-based microchips surpassed their surface counterparts in 5-20 times, while the ratios of signals for perfect-mismatch pairs for gel microchips exceeded the corresponding ratios for surface microchips in 2-4 times. These effects may be attributed to the better immobilization efficiency and to the higher thermodynamic association constants for duplex formation within gel pads.

Electrophoresis↗

[Comparative analysis of N-acetylation polymorphism in humans as determined by phenotyping and genotyping].

The N-acetylation polymorphisms of volunteers from the Moscow population analyzed by phenotyping and genotyping have been compared. The ratios between the proportions of fast acetylators (FAs) and slow acetylators (SAs) estimated by phenotyping and genotyping do not differ significantly from each other (47 and 44%, respectively). The absolute acetylation rate widely varies in both FAs and SAs. The NAT2 genotype and allele frequencies in the population sample have been calculated. The most frequent alleles are NAT2*4 (a "fast" allele), NAT2*5, and NAT2*6 ("slow" alleles); the most frequent genotypes are NAT2*5/*5, NAT2*4/*6, and NAT2*4/*5. Comparative analysis of N-acetylation polymorphism estimated by phenotyping and genotyping in the same subjects has shown a complete concordance between the phenotype and genotype in only 62 out of 75 subjects (87%). Comparative characteristics and presumed applications of the two approaches (quantitative estimation of acetylation rate and qualitative determination of the acetylator genotype) to the identification of individual acetylation status are presented.

Acetylation↗

Effect of mixing on reaction-diffusion kinetics for protein hydrogel-based microchips.

Protein hydrogel-based microchips are being developed for high-throughput evaluation of the concentrations and activities of various proteins. To shorten the time of analysis, the reaction-diffusion kinetics on gel microchips should be accelerated. Here we present the results of the experimental and theoretical analysis of the reaction-diffusion kinetics enforced by mixing with peristaltic pump. The experiments were carried out on gel-based protein microchips with immobilized antibodies under the conditions utilized for on-chip immunoassay. The dependence of fluorescence signals at saturation and corresponding saturation times on the concentrations of immobilized antibodies and antigen in solution proved to be in good agreement with theoretical predictions. It is shown that the enhancement of transport with peristaltic pump results in more than five-fold acceleration of binding kinetics. Our results suggest useful criteria for the optimal conditions for assays on gel microchips to balance high sensitivity and rapid fluorescence saturation kinetics.

Diffusion↗

Quantitative immunoassay of biotoxins on hydrogel-based protein microchips.

Three-dimensional gel-based microchips with immobilized proteins were used for quantitative immunoassay of a series of plant (ricin and viscumin) and bacterial (staphylococcal enterotoxin B, tetanus and diphtheria toxins, and lethal factor of anthrax) toxins. It was shown that different types of immunoassays (direct, competitive, and sandwich type) could be carried out on gel microchips. As shown by confocal microscope studies, antigen-antibody interactions involving the formation of tertiary antibody-antigen-antibody complex occur in the whole volume of microchip gel elements. Sandwich assay on microchips with immobilized antibodies provided the highest sensitivity of detection (0.1 ng/ml for ricin). Antibodies labeled with fluorescent dyes, horseradish peroxidase conjugates, or biotinylated antibodies with subsequent treatment with labeled avidin were used as developing antibodies. The results of immunoassays were recorded using fluorescence, chemiluminescence, or matrix-assisted laser desorption ionization mass spectrometry directly from microchip gel elements. Gel microchips with immobilized capture antibodies were used to analyze the sample simultaneously for the presence of all six biotoxins with the same sensitivity as that for any single toxin.

Animals↗

Discrimination between perfect and mismatched duplexes with oligonucleotide gel microchips: role of thermodynamic and kinetic effects during hybridization.

The efficiency of discrimination between perfect and mismatched duplexes during hybridization on microchips depends on the concentrations of target DNA in solution and immobilized probes, buffer composition, and temperature of hybridization and is determined by both thermodynamic relationships and hybridization kinetics. In this work, optimal conditions of discrimination were studied using hybridization of fluorescently labeled target DNA with custom-made gel-based oligonucleotide microchips. The higher the concentration of immobilized probes and the higher the association constant, the higher the concentration of the formed duplexes and the stronger the corresponding fluorescence signal, but, simultaneously, the longer the time needed to reach equilibrium. Since mismatched duplexes hybridize faster than their perfect counterparts, perfect-to-mismatch signal ratio is lower in transient regime, and short hybridization times may hamper the detection of mutations. The saturation time can be shortened by decreasing the probe concentration or augmenting the gel porosity. This improves the detection of mutations in transient regime. It is shown that the decrease in the initial concentration of oligonucleotide probes by an order of magnitude causes only 1.5-2.5-fold decrease of fluorescence signals after hybridization of perfect duplexes for 3-12 h. At the same time, these conditions improve the discrimination between perfect and mismatched duplexes more than two-fold. A similar improvement may be obtained using an optimized dissociation procedure.

Base Composition↗

[New technologies in the determination of drug susceptibility in Mycobacterium tuberculosis].

A variety of mutations in the genes rpoB, katG, inhA, ahpC, kasA was studied by using different molecular biological methods (conformational polymorphism of single-chain fragments, heteroduplex analysis, biochips) in rifampicin- and isoniazid-resistant Mycobacterium tuberculosis (MBT) strains isolated from patients with pulmonary tuberculosis. Twenty-nine mutation combinations were identified in the MBT strains. The use of biochips is the most promising method for identifying the type of mutations responsible for the simultaneous resistance to rifampicin and isoniazid. Detection of several MBT strains in one patient requires the use a combination of molecular biological and microbiological studies.

Antitubercular Agents↗

[Identification of Mycobacterium tuberculosis strains and a simultaneous identification of their drug resistance by the hybridization method on oligonucleotide microchips].

A method of multiplex polymerase chain reaction (PCR) with subsequent hyoridization on oligonucleotide microchips was worked out to identify the Mycobacterium tuberculosis complex and to determine simultaneously the bacterial sensitivity to 2 first-line drugs, i.e. rifampin and isoniazid. The method provides for detecting above 95% of rifampin-resistant and around 80% of isoniazid-resistant strains within 1 day.

Bacterial Proteins↗

[Molecular genetic methods for the detection of rifampicin-resistant Mycobacterium tuberculosis strains].

RCR-heteroduplex (GDA) and chip methods were used to detect rifampricin-resistant (RR) and rifampicin-sensitive (RS) Mycobacterium tuberculosis (MTB) in the samples from patients (sputum) and in the clinical isolates of MTB from these patients (MB/BacT liquid medium and Lowenstein Jensen's (LJ) solid medium. The efficiency of detecting RR and RS of MTB (from the sputum) is 100 and 92.3% in the chip and GDA tests, respectively. Correlations between GDA (sputum) and drug test (LJ) were 91.7%, that of chip (sputum) and drug test LJ, 88.5%, chip (sputum) and chip clinical isolates (LJ), 100%. The efficacy of GDA and chip in the detection of RR of MTB strains is under discussion.

Antitubercular Agents↗

[Clinical value of microchip technology in determination of drug resistance of Mycobacterium tuberculosis].

The patients with multiresistant tuberculosis were divided into 2 groups: the sensitivity of Mycobacteria tuberculosis to antituberculous drugs was evaluated in Group 1 by the methods of absolute concentrations and in Group 2 by biological microchips determining mutations in the rpo3 gene responsible for rifampicin resistance. The results of the drug sensitivity test were obtained after 3 months of treatment in Group 1 and several days prior treatment in Group 2. By taking into account the test results, reserve drugs was used in Group 2 patients. Subsequently, the results of the drug sensitivity tests carried out by the bacteriological method in Group 2 patients showed that isoniazid resistance was simultaneously noted if there were mutations in the rpo-B gene. Timely treatment with reserve drugs exhibited higher efficiency of treatment with its shorter duration in Group 2 than in Group 1.

Adult↗

Mixed mode of ligand-DNA binding results in S-shaped binding curves.

S-shaped binding curves often characterize interactions of ligands with nucleic acid molecules as analyzed by different physico-chemical and biophysical techniques. S-shaped experimental binding curves are usually interpreted as indicative of the positive cooperative interactions between the bound ligand molecules. This paper demonstrates that S-shaped binding curves may occur as a result of the "mixed mode" of DNA binding by the same ligand molecule. Mixed mode of the ligand-DNA binding can occur, for example, due to 1) isomerization or dimerization of the ligands in solution or on the DNA lattice, 2) their ability to intercalate the DNA and to bind it within the minor groove in different orientations. DNA-ligand complexes are characterized by the length of the ligand binding site on the DNA lattice (so-called "multiple-contact" model). We show here that if two or more complexes with different lengths of the ligand binding sites could be produced by the same ligand, the dependence of the concentration of the complex with the shorter length of binding site on the total concentration of ligand should be S-shaped. Our theoretical model is confirmed by comparison of the calculated and experimental CD binding curves for bis-netropsin binding to poly(dA-dT) poly(dA-dT). Bis-netropsin forms two types of DNA complexes due to its ability to interact with the DNA as monomers and trimers. Experimental S-shaped bis-netropsin-DNA binding curve is shown to be in good correlation with those calculated on the basis of our theoretical model. The present work provides new insight into the analysis of ligand-DNA binding curves.

DNA↗

Molecular modelling of ligand-DNA minor groove binding: role of ligand-water interactions.

A procedure was developed for quantitative estimation of the ligand affinity for the DNA minor groove with allowance for ligand hydration, whereby the binding energy was calculated as the difference in the energies of ligand-DNA and ligand-water interactions. Adequacy of the procedure was demonstrated with the structural motifs (pyrrolecarboxamide, benzimidazole, furancarboxamide, and phthalimide) of well-known ligands for the case of a d(GCA10CG).d(CGT10GC) duplex. On the strength of the results obtained, an indole-based motif was proposed as the basis for a highly affined minor groove binder.

Base Sequence↗

Binding of symmetrical cyanine dyes into the DNA minor groove.

Optical methods, such as fluorescence, circular dichroism and linear flow dichroism, were used to study the binding to DNA of four symmetrical cyanine dyes, each consisting of two identical quinoline, benzthiazole, indole, or benzoxazole fragments connected by a trimethine bridge. The ligands were shown to form a monomer type complex into the DNA minor groove. The complex of quinoline-containing ligand with calf thymus DNA appeared to be the most resistant to ionic strength, and it did not dissociate completely even in 1 M NaCl. Binding of cyanine dyes to DNA could also be characterized by possibility to form ligand dimers into the DNA minor groove, by slight preference of binding to AT pairs, as well as by possible intercalation between base pairs of poly(dG)-poly(dC). The correlation found between the binding constants to DNA and the extent of cyanine dyes hydrophobicity estimated as the n-octanol/water partition coefficient is indicative of a significant role of hydrophobic interactions for the ligand binding into the DNA minor groove.

Animals↗

Massive parallel analysis of DNA-Hoechst 33258 binding specificity with a generic oligodeoxyribonucleotide microchip.

A generic oligodeoxyribonucleotide microchip was used to determine the sequence specificity of Hoechst 33258 binding to double-stranded DNA. The generic microchip contained 4096 oxctadeoxynucleo-tides in which all possible 4(6)= 4096 hexadeoxy-nucleotide sequences are flanked on both the 3'- and 5'-ends with equimolar mixtures of four bases. The microchip was manufactured by chemical immobilization of presynthesized 8mers within polyacrylamide gel pads. A selected set of immobilized 8mers was converted to double-stranded form by hybridization with a mixture of fluorescently labeled complementary 8mers. Massive parallel measurements of melting curves were carried out for the majority of 2080 6mer duplexes, in both the absence and presence of the Hoechst dye. The sequence-specific affinity for Hoechst 33258 was calculated as the increase in melting temperature caused by ligand binding. The dye exhibited specificity for A:T but not G:C base pairs. The affinity is low for two A:T base pairs, increases significantly for three, and reaches a plateau for four A:T base pairs. The relative ligand affinity for all trinucleotide and tetranucleotide sequences (A/T)(3)and (A/T)(4)was estimated. The free energy of dye binding to several duplexes was calculated from the equilibrium melting curves of the duplexes formed on the oligonucleotide microchips. This method can be used as a general approach for massive screening of the sequence specificity of DNA-binding compounds.

Bisbenzimidazole↗

Design of sequence-specific DNA binding ligands that use a two-stranded peptide motif for DNA sequence recognition.

The design and DNA binding activity of beta-structure-forming peptides and netropsin-peptide conjugates are reported. It is found that a pair of peptides-S,S'-bis(Lys-Gly-Val-Cys-Val-NH-NH-Dns)-bridged by an S-S bond binds at least 10 times more strongly to poly(dG).poly(dC) than to poly(dA).poly(dT). This peptide can also discriminate between 5'-GpG-3' and 5'-GpC-3' steps in the DNA minor groove. Based on these observations, new synthetic ligands, bis-netropsins, were constructed in which two netropsin-like fragments were attached by means of short linkers to a pair of peptides-Gly-Cys-Gly- or Val-Cys-Val-bridged by S-S bonds. These compounds possess a composite binding specificity: the peptide chains recognize 5'-GpG-3' steps on DNA, whereas the netropsin-like fragments bind preferentially to runs of 4 AT base pairs. Our data indicate that combining the AT-base-pair specific properties of the netropsin-type structure with the 5'-GpG-3'-specific properties of certain oligopeptides offers a new approach to the synthesis of ligands capable of recognizing mixed sequences of AT- and GC-base pairs in the DNA minor groove. These compounds are potential models for DNA-binding domains in proteins which specifically recognize base pair sequences in the minor groove of DNA.

Aminoglycosides↗

Mono-, di- and trimeric binding of a bis-netropsin to DNA.

An unusual 3:1 stoichiometry for complex formation between an elongated bis-netropsin compound and its binding site on DNA has been observed. Circular dichroism measurements distinguish two types of complexes formed between this bis-netropsin and poly[d(A-T)].poly[d(A-T)]. The first type is characterized by a 1:1 saturating ratio of bound molecules per ten base pairs. Formation of the second type results from the cooperative binding of two additional bis-netropsin molecules to the first type of complex. In contrast to these results observed for binding to the alternating polynucleotide, only the 1:1 type of complex is formed when this ligand binds to the homopolymer poly(dA).poly(dT).

Circular Dichroism↗

Geometrical correlations useful for design of sequence-specific DNA narrow groove binding ligands.

Isohelical geometry of sequence-specific DNA narrow groove binding ligands was analyzed in terms of H-bond donor/acceptor complementarity between the base pair atoms facing into the narrow groove and the corresponding H-bond donating atoms regularly disposed along the ligand molecule. Spatial correlations found in analytical form were applied to analysis of naturally occurring and hypothetical drug molecule structures. For the case of B-like isohelices the permitted values of the distance L0 between each two neighboring H-bond donating atoms of the ligand as well as the bending angle tau 0 of the line subsequently connecting these atoms were estimated as follows: L0 congruent to (5.0 +/- 0.4) A; tau 0 congruent to (26 +/- 2) degrees.

Base Sequence↗