Biomedical subjects
Publications and source records attributed to A Shivanyuk.
Aminomethylation of resorcarenes at the wider rim with bulky diisopropylamine and formaline leads to trisubstituted derivatives. Analogous reaction with C(2v)-symmetrical resorcarene tetratosylate gives the monoaminomethylated compound. Further reactions of remaining unsubstituted resorcinol rings result in new resorcarene derivatives. [reaction: see text]
A variety of aromatic guest molecules are co-encapsulated with Bu4SbBr in an assembly of six resorcinarene subunits.
A kinetically stable, dimeric capsule is formed by tetrahydroxyresorcinarene in methanol; it encapsulates tropylium and tetramethylammonium cations.
Encapsulation complexes are assemblies in which a reversibly formed host more or less completely surrounds guest molecules. Host structures held together by hydrogen bonds have lifetimes in organic solvents of milliseconds to hours, long enough to directly observe the encapsulated guest by NMR spectroscopy. We describe here the action of alkyl ammonium compounds as guests that gather up to six molecules of the host module to form encapsulation complexes. The stoichiometry of the complexes--the largest hydrogen-bonded host capsules to date--is determined by the size and concentration of the guest.
Crystal structures are reported for various co-crystals of rccc-resorcarenes with triethylammonium chloride. Usually, two molecules of a C2v-symmetric tetraester 2 in the boat conformation are linked through four hydrogen-bonded chloride anions to give dimeric assemblies. Two of the chloride anions may be replaced by four hydrogen-bonded ethanol molecules in an otherwise similar structure. These assemblies, which consist of six or eight components, posses voluminous, negatively charged chambers in which two triethylammionium cations, 3+, are included as guests by strong electrostatic and hydrogen-bonding interactions. The host-guest N-H...Cl hydrogen bonds were clearly detected at 173 K. These are the first examples of hydrogen-bonded, solid-state capsules trapping two ions of the same charge in close proximity. In the 1:2 complex with 3+ Cl-, the molecule of the parent resorcarene 1 also adopts a boat conformation whose cavity is considerably extended by four hydrogen-bonded chloride anions. The pocket formed in this way again includes two 3+ ions as a result of electrostatic and hydrogen bonding host-guest interactions. All these structures show that the boat conformers of resorcarenes can be used as a novel motif for the construction of hydrogen-bonded assemblies capable of molecular inclusion and encapsulation.
The synthesis and spectroscopic characterization of self-assembling calix[4]arene based capsules 1a.1a and 1b.1b are described. These compounds feature four urea substituents at the upper rims and four secondary amide fragments at the lower rims that can participate in inter- and intramolecular hydrogen bonding in apolar solution. Communication between the calixarene rims in 1a, b influences the self-assembled cavity's size and shape. Specifically. dimerization results in a perfect cone conformation of the calixarene skeleton in 1a, b and stabilizes a seam of intramolecular amide C=O...H-N hydrogen bonds at the lower rim. This seam is cycloenantiomeric, with either clockwise or counterclockwise arrangements of the head-to-tail amides. Complexation of Na+-cation breaks hydrogen bonds at the lower rim but maintains the capsular assembly. Encapsulation properties of 1a.1a and 1b.1b were studied in nonpolar solvents and their binary mixtures as well as through heterodimerization experiments. The presence of amide groups at the lower rim causes notable differences in the capsule's binding affinities when compared to the corresponding tetraester capsules 1c.1c and 1d.1d. In the monomeric state calixarenes 1a, b are in a pinched cone conformation. The solid state X-ray crystallographic studies with monomeric 1a reveal only two intramolecular C=O...H-N hydrogen bonds between the adjacent amides at the lower rim, and an extensive network of intermolecular hydrogen bonds between urea groups at the upper rim.
Synthesis of novel water-soluble cavitands 1 and 2 and their complexes--the caviplexes--is described. The solubility in water derives from four primary ammonium groups on the lower rim and eight secondary amide groups on the upper rim. Cavitands 1 and 2 exist as D2d velcraplex dimers in aqueous solution but the addition of lipophilic guests 15-24 induces conformational changes to the vase-like structures. The internal cavity dimensions are 8 x 10 A, and the exchange rates of guests in the caviplexes are slow on the NMR time-scale (room temperature and 600 MHz). The direct observation of bound species and the stoichiometry of the complexes is reported. The association constants (Ka) between 0.4 x 10(-1) (-deltaG295= 0.7 kcalmol(-1)) and 1.4 x 10(2)M(-1) (-deltaG295=2.9 kcalmol(-1)) in D2O and 1.4 x 10(1)(-deltaG295= 1.7 kcalmol(-1)) and 2.8 x 10(4)M(-1)(-deltaG295=6.0 kcalmol(-1)) in [D4]methanol for aliphatic guests 16-24 were determined. Guest exchange rates of the new hosts 1 and 2 are considerably slower than rates observed for typical open-ended cavities in aqueous solution.
Explore the source record for details and available documents.
Conformationally rigidified tetraCMPO derivatives have been prepared from calix[4]arene bis(crown ether) 4a in which adjacent oxygens are bridged at the narrow rim by two diethylene glycol links. Acylation of the tetraamine 4c with the CMPO-active ester 5b gave the tetraphosphine oxide 6a, while the tetraphosphinate 6b and the tetraphosphonate 6c were obtained by Arbuzov reaction of tetrabromoacetamido derivative 7 with PhP(OEt)2 or P(OEt)3. The extraction ability of these CMPO derivatives was checked for selected lanthanides and actinides and compared with the analogous compounds 1b, 10b and 10d derived from calix[4]arene tetrapentyl ether. All rigidified bis(crown ether) ligands are more effective extractants than their pentyl ether counterparts and require only 1/10 of the concentration (cL= 10 4M) to obtain the same distribution coefficients, while with CMPO itself a 2,000-fold concentration is necessary. This could be a consequence of a better preorganisation of the ligating functions owing to the rigidity which on the other hand did not change the observed selectivity for americium (DAm/DEu=9-19) and for light lanthanides over heavy ones. NMR relaxivity titration curves show that the complex of Gd3+ with ligand 6a is highly oligomerised in anhydrous acetonitrile over a large range of ligand:metal concentration ratios. Nuclear magnetic relaxation dispersion (NMRD) profiles also showed that large oligomers were formed, and their mean tumbling times were deduced from the Solomon-Bloembergen-Morgan equations. The NMR spectra of dia- and paramagnetic lanthanide complexes with 6a agreed with the presence of two conformers with an elongated calix[4]arene skeleton in which the distances between opposite methylene groups are different. Contrary to what was observed with ligand 2a, the addition of nitrate ions does not labilize the metal complexes, presumably because of the rigidification effect of the ether bridges. Single-crystal X-ray structures were obtained for the active ester 5b and for diphenylphosphorylacetic acid 5a.
The lanthanide and Th4+ complexes with calix[4]arene ligands substituted either on the narrow or at the wide rim by four coordinating groups behave totally differently as shown by an NMR investigation of the dia- and paramagnetic complexes. Solutions of complexes were prepared by reacting anhydrous metal perchlorate salts with the ligands in dry acetonitrile (CAUTION). Relaxation time T1 titrations of acetonitrile solutions of Gd3+ by calixarenes indicate that ligands subsituted on the narrow rim form stable 1:1 complexes whether they feature four amide groups (1) or four phosphine oxide functions. In contrast, a ligand substituted by four (carbamoylmethyl)-diphenylphosphine oxide moieties on the wide rim (3) and its derivatives from polymeric species even at a 1:1 ligand/metal concentration ratio. Nuclear magnetic relaxation dispersion (NMRD) curves (relaxation rates 1/T1 vs magnetic field strength) of Gd3+, Gd3+.1 and Gd3+.3 perchlorates in acetonitrile are analyzed by an extended version of the Solomon-Bloembergen-Morgan equations. A comparison of the calculated rotational correlation times tau r shows that ligand 3 forms oligomeric Gd3+ species. The chelates of ligand 1 are axially symmetric (C4 symmetry), and the paramagnetic shifts induced by the Yb3+ ion are accounted for quantitatively. The addition of water or of nitrate ions does not modify the geometry of the complex. The metal chelates of 3 and its derivatives adopt a C2 symmetry, and the paramagnetic shifts are interpreted on a semiquantitative basis only. Water and NO3- ions completely labilize the complexes of the heavy lanthanides. The very high selectivity of ligand 3 through the lanthanide series stems from a complex interplay of factors.
The dimerization of the self-complementary resorcarene tetraesters is triggered by the entrapment of a tropylium cation in the pi-basic cavity. Eight intermolecular OH small middle dot small middle dot small middle dotOC hydrogen bonds together with host-guest interactions such as charge transfer and C-H small middle dot small middle dot small middle dotpi bonding are responsible for the high stability of this assembly (see picture). Hereby neither the host-guest interaction nor the interaction of two resorcarene molecules through hydrogen bonds is sufficient by itself to form the complex.