PubMed Health⌕ Search

Biomedical subjects

A Simoncsits

Publications and source records attributed to A Simoncsits.

15 recordsLinked to original sources
PubMed1991

Characterization of a neuronal interleukin-1 receptor and the corresponding mRNA in the mouse anterior pituitary cell line AtT-20.

Interleukin-1 (IL-1) mediates numerous responses on the mouse anterior pituitary cell line AtT-20. We have studied the ligand binding properties of the IL-1 receptors (IL-1R) of the AtT-20 cells and found that they possess 1.5 x 10(3) receptors/cell with a Kd of 0.15 nM for [125I]IL-1 alpha. Using oligonucleotide primers, which define a 236 bp region of the cDNA coding for the cytosolic part of the mouse T-cell IL-1R, and cDNA prepared from AtT-20 cells, we obtained by polymerase chain reaction (PCR) a DNA fragment which was shown to possess an identical sequence to that of the corresponding region of the mouse T-cell IL-1R. Thus the AtT-20 pituitary cell line IL-1 receptor appears to be similar to those found on mouse T-cells and fibroblasts.

Adrenocorticotropic Hormone↗
PubMed1991

Conversion of single-stranded oligonucleotides into cloned duplexes and its consecutive application to short artificial genes.

A general method to convert single-stranded, chemically synthesized oligonucleotides into cloned duplexes is described. Oligonucleotides supplied with 3'-terminal extensions that are complementary to 3'-protruding ends obtained by certain restriction enzymes can be cloned either directly or with the help of an adapter molecule into double-stranded vectors. Two methods have also been developed for consecutive cloning applications. According to these methods, the synthetic oligonucleotides (and their enzymatically prepared complementary strands) are joined, one after the other, inside a cloning vector, each joining requiring one cloning step. Synthetic genes are thus built up from oligonucleotides corresponding to only one strand of the DNA. The sequential assembly of the cloned duplex takes place in the 5' to 3' direction. Each oligonucleotide is supplied with a four-nucleotide-long 3'-terminal extension, but this sequence is eliminated when the joining takes place, leaving no limiting sequence between the oligonucleotides. The two consecutive cloning methods, the adapter and the polycloning site methods, are illustrated by the assembly of short artificial genes.

Amino Acid Sequence↗
PubMed1990

Synthesis of a gene for human serum albumin and its expression in Saccharomyces cerevisiae.

A 1761 base pairs long artificial gene coding for human serum albumin (HSA) has been prepared by a newly developed synthetic approach, resulting in the largest synthetic gene so far described. Oligonucleotides corresponding to only one strand of the HSA gene were prepared by chemical synthesis, while the complementary strand was obtained by a combination of enzymatic and cloning steps. 24 synthetic, 69-85 nucleotides long oligonucleotides covering the major part of the HSA gene (41-1761 nucleotides) were used as building blocks. Generally, four groups of 6-6 such oligonucleotides were successively cloned in pUC19 Escherichia coli vector to obtain about quarters of the gene as large fragments. Joining of these four fragments resulted in a cloned DNA coding for the 13-585 amino acid region of HSA, which was further supplemented with a double-stranded linker sequence coding for the amino terminal 12 amino acids. The completed structural gene composed of frequently used codons in the highly expressed yeast genes was then supplied with yeast regulatory sequences and the HSA expression cassette so obtained was inserted into an Escherichia coli-Saccharomyces cerevisiae shuttle vector. This vector was shown to direct the expression in Saccharomyces cerevisiae of correctly processed, mature HSA which was recognized by antiserum to HSA, and possessed the correct N-terminal amino acid sequence.

Base Sequence↗
PubMed1988

Synthesis, cloning and expression in Escherichia coli of artificial genes coding for biologically active elongated precursors of the vasoactive intestinal polypeptide.

Synthetic genes coding for elongated precursors of the vasoactive intestinal polypeptide (VIP) were synthesized and cloned in a highly efficient Escherichia coli expression vector. The synthetic genes code for VIP with its methionine (at position 17) replaced by leucine and elongated at the C-terminus by Gly (vasoactive intestinal polypeptide-Gly, i.e. VIPa) or by Gly-Lys-Arg (vasoactive intestinal polypeptide-Gly-Lys-Arg, i.e. VIPb). The synthetic genes fused to the N-terminal part of the E. coli beta-galactosidase gene were expressed to yield high amounts of fusion proteins reaching upon induction at least 60% of the total cellular protein. The fusion proteins of 314 and 316 amino acids carrying in their C-terminal portion either the 29 or 31 amino acids long VIP precursor polypeptide were shown to be immunoreactive with VIP antisera and were further purified and cleaved by CNBr. The resulting purified peptide precursors (VIPa and VIPb) were recognized by VIP receptors in rat liver plasma membranes and by antibodies to porcine VIP in a radioimmunoassay. Both precursors activated adenylate cyclase in rat liver membranes and stimulated pancreatic secretion in the cat. The affinity and potency of the cloned precursors is close to that of VIP purified from porcine intestine, suggesting that the elongated VIP precursors may act even without being converted into the C-terminal amide form of the peptide. The elongated VIP precursors expressed in E. coli may provide a cheap, large-scale source of experimental material for studies on VIP actions.

Amino Acid Sequence↗
PubMed1979

Sequences of large T1 ribonuclease-resistant oligoribonucleotides from protamine mRNA: the overall architecture of protamine mRNA.

Limited T1 ribonuclease digestion of the family of protamine mRNA's purified from rainbow trout testis yields several large oligoribonucleotide fragments ranging in size from 12--54 nucleotides in length. Several of these fragments purified by two dimensional gel electrophoresis contain several G residues and must represent nuclease-resistant, base-paired regions of the mRNA. Sequence analysis of these oligonucleotides by the method of Simoncsits, A., Brownlee, G.G., Brown, R.S., Rubin, J.R. and Guilley, H. (1977) Nature 269: 833-836, shows that these oligoribonucleotides arise from the 5'- and 3'-non-coding regions of the mRNA. Comparisons of the sequences of the large RNA fragment with DNA sequences obtained after cloning double-stranded protamine cDNA in the plasmids pBr322 and pmB9 show precise correspondence of a 54 nucleotide RNA fragment with positions 49--100 from the 3'-poly(A) tract and extending to within 5 nucleotides of the termination codon. Two other RNA fragments of 21 and 25 nucleotides in length arise from the 5'-non-coding region of the message and possess an AUG-sequence at their 3'-termini which is the initiation codon. The presence of distinct by homologous sequences in several sets of large RNA fragments is consistent with the presence of several closely related protamine mRNA's.

Animals↗
PubMed1978

Methylated cap formation by enzymes bound to nuclear informofer particles.

Rat liver nuclear 30 S ribonucleoprotein particles containing pre-mRNA and nuclear sap proteins have been shown to modify in vitro the synthetic dinucleotide ppGpC in the presence of GTP and S-adenosyl-L-methionine (SAM) by the formation of a blocked and methylated (capped) structure 7(meG(5')ppp(5'-GmepC. In the absence of SAM the predominant reaction was GpppGpC. Our results indicate that the 30S ribonucleoprotein particles (informofers) as well as the proteins of the nuclear sap possess both guanylyltransferase, N7-, and 2-o-methyltransferase activities.

Animals↗
PubMed1978

The nucleoside sequence of tyrosine tRNA from Bacillus stearothermophilus.

The nucleotide sequence of tRNATyr from B. stearothermophilus has been determined: pG-G-A-G-G-G-G-s4U-A-G-C-G-A-A-G-U-Gm-G-C-U-A-A-m1A-C-G-C-G-G-C-G-G-A-C-U-Q-U-A-ms2i6A-A-psi-C-C-G-C-U-C-C-C-U-U-U-G-G-G-U-U-C-G-G-C-G-G-T-psi-C-G-A-A-U-C-C-G-U-C-C-C-C-C-U-C-C-A-C-C-AOH. A combination of classical fingerprinting methods, partial nuclease P1 digestion and two-dimensional homochromatography and a rapid "read off" sequencing gel technique were used to establish the complete nucleotide sequence.

Base Sequence↗
PubMed1978

Chemical synthesis of 5'-pyrophosphate and triphosphate derivatives of 3'-5' ApA, ApG, GpA and GpG. CD study of the effect of 5'-phosphate groups on the conformation of 3'-5' GpG.

A simple, two-step method is described for the synthesis of the 5'-pyro- and triphosphate derivatives of 3'-5' ApA, ApG, GpA and GpG. The readily accessible 2'(3')-5' ApA, ApG, GpA and GpG were converted in one step to the corresponding 5'-phosphoramidate derivatives which were then transformed to the 5'-pyro- and triphosphates. CD spectra of 3'-5' pn GpG (n = 0,1,2 or 3) derivatives, measured at pH 1, indicated stabilization of the (syn) G+p (anti)G conformation by the 5'-phosphate groups.

Circular Dichroism↗
PubMed1975

Nucleoside 5'-phosphordiamidates, synthesis and some properties.

A simple way of preparing nucleoside 5'-phosphordiamidate is described. The procedure is based on the ammonolysis of nucleoside 5'-phosphordichloridates by dilute aqueous ammonium hydroxide. The behaviour of nucleoside phosphordiamidates under acidic and alkaline conditions is also reported. Alkaline hydrolysis results in the formation of the parent nucleoside, whereas one amide group can be removed selectively by mild acid hydrolysis. This property of nucleoside phosphordiamidates served as a basis for the elaboration of a simple synthesis of nucleoside phosphoramidates starting from nucleosides.

Chemical Phenomena↗