Biomedical subjects

A Terfort

Publications and source records attributed to A Terfort.

8 recordsLinked to original sources

PubMed2006

Combined STM and FTIR characterization of terphenylalkanethiol monolayers on Au(111): effect of alkyl chain length and deposition temperature.

Self-assembled monolayers (SAMs) of 4,4'-terphenyl-substituted alkanethiols C6H5(C6H4)2(CH2)n-SH (TPn, n = 1-6) on Au (111) substrates were studied using scanning tunneling microscopy (STM) and infrared reflection absorption spectroscopy (IRRAS). When the SAMs were prepared at room temperature (RT, 298 K), TPn films (except TP2) exhibit an odd-even effect regarding both molecular orientation and packing density. For all investigated films, STM data reveals the presence of a large degree of lateral order. In the case of odd-numbered TPns, the films revealed a (2 square root(3) x square root(3))R30 degree molecular arrangement. For the even-numbered TP4 and TP6 SAMs, a c(5 square root(3) x 3) rectangular unit cell was found. The packing density for the even-numbered TPn SAMs is 25% lower than that for the odd-numbered TPn SAMs. When the SAMs were prepared at 333 K, the even-numbered SAMs were found to form structures with a significantly lower packing density. In the case of TP2, instead of the (2 square root(3) x square root(3))R30 degree structure formed at room temperature, a c(5 square root(3) x 3) structure was observed. For TP6 SAMs, the room-temperature c(5 square root(3) x 3) structure was replaced by a (6 square root(3) x 2 square root(3))R30 degree structure.

Journal Article↗

PubMed2005

Self-assembled monolayers of aromatic selenolates on noble metal substrates.

Self-assembled monolayers (SAMs) formed from bis(biphenyl-4-yl) diselenide (BBPDSe) on Au(111) and Ag(111) substrates have been characterized by high-resolution X-ray photoelectron spectroscopy, near-edge X-ray absorption fine structure spectroscopy, infrared reflection absorption spectroscopy, water contact angle measurements, and scanning tunneling microscopy (STM). BBPDSe was found to form contamination-free, densely packed, and well-ordered biphenyl selenolate (BPSe) SAMs on both Au and Ag. Spectroscopic data suggest very similar packing density, orientational order, and molecular inclination in BPSe/Au and BPSe/Ag. STM data give a similar intermolecular spacing of 5.3 +/- 0.4 A on both Au and Ag but exhibit differences in the exact arrangement of the BPSe molecules on these two substrates, with the (2 square root[3] x square root[3])R30 degrees and (square root[3] x square root[3])R30 degrees unit cells on Au and Ag, respectively. There is strong evidence for adsorbate-mediated substrate restructuring in the case of Au, whereas no clear statement on this issue can be made in the case of Ag. The film quality of the BPSe SAMs is superior to their thiol analogues, which is presumably related to a better ability of the selenolates to adjust the surface lattice of the substrate to the most favorable 2D arrangement of the adsorbate molecules. This suggests that aromatic selenolates represent an attractive alternative to the respective thiols.

Absorption↗

PubMed2005

Odd-even effects in photoemission from terphenyl-substituted alkanethiolate self-assembled monolayers.

Self-assembled monolayers (SAMs) formed from 4,4'-terphenyl-substituted alkanethiols C6H5(C6H4)2-(CH2)nSH (TPn, n = 1-6) on polycrystalline (111) gold and silver substrates have been characterized by synchrotron-based high-resolution X-ray photoelectron spectroscopy. The intensities, binding energy positions, and width of most photoemission lines exhibited pronounced odd-even effects, i.e., systematic and periodic variation, depending on either odd or even number of the methylene units in the aliphatic linker of the TPn molecules. The detailed analysis of these effects provides important information on the bonding and arrangement of the chemisorbed sulfur headgroups in the TPn films and balance of the structural forces in alkanethiolate SAMs.

Journal Article↗

PubMed2005

Self-assembled monolayers of alkaneselenolates on (111) gold and silver.

Self-assembled monolayers (SAMs) formed from didodecyl diselenide (C12SeSeC12) and didodecyl selenide (C12SeC12) on (111) Au and Ag substrates were extensively characterized by several complementary techniques. C12SeSeC12 was found to form contamination-free, densely packed, and well-ordered C12Se SAMs on both substrates, whereas the adsorption of C12SeC12 occurred only on Au and resulted in the formation of a SAM-like C12SeC12 film with a low packing density and a conformational disorder. The properties of the C12Se SAMs were compared with those of dodecanethiolate (C12S) SAMs. The packing density, orientational order, and molecular inclination in C12Se/Au and C12S/Au were found to be very similar. In contrast, C12Se/Ag exhibited significantly lower packing density, a lower degree of the conformational and orientational order, and a larger molecular inclination than C12S/Ag. The results suggest a sp3 bonding configuration for the selenium atom on Au and Ag and indicate a larger corrugation of the headgroup-substrate binding energy surface in C12Se/Ag than in C12S/Ag.

Gold↗

PubMed2001

Electron transport through thin organic films in metal--insulator--metal junctions based on self-assembled monolayers.

This paper describes an experimentally simple system for measuring rates of electron transport across organic thin films having a range of molecular structures. The system uses a metal--insulator--metal junction based on self-assembled monolayers (SAMs); it is particularly easy to assemble. The junction consists of a SAM supported on a silver film (Ag-SAM(1)) in contact with a second SAM supported on the surface of a drop of mercury (Hg-SAM(2))--that is, a Ag-SAM(1)SAM(2)-Hg junction. SAM(1) and SAM(2) can be derived from the same or different thiols. The current that flowed across junctions with SAMs of aliphatic thiols or aromatic thiols on Ag and a SAM of hexadecane thiol on Hg depended both on the molecular structure and on the thickness of the SAM on Ag: the current density at a bias of 0.5 V ranged from 2 x 10(-10) A/cm(2) for HS(CH(2))(15)CH(3) on Ag to 1 x 10(-6) A/cm(2) for HS(CH(2))(7)CH(3) on Ag, and from 3 x 10(-6) A/cm(2) for HS(Ph)(3)H (Ph = 1,4-C(6)H(4)) on Ag to 7 x 10(-4) A/cm(2) for HSPhH on Ag. The current density increased roughly linearly with the area of contact between SAM(1) and SAM(2), and it was not different between Ag films that were 100 or 200 nm thick. The current--voltage curves were symmetrical around V = 0. The current density decreased with increasing distance between the electrodes according to the relation I = I(0)e(-beta d(Ag,Hg)), where d(Ag,Hg) is the distance between the electrodes, and beta is the structure-dependent attenuation factor for the molecules making up SAM(1). At an applied potential of 0.5 V, beta was 0.87 +/- 0.1 A(-1) for alkanethiols, 0.61 +/- 0.1 A(-1) for oligophenylene thiols, and 0.67 +/- 0.1 A(-1) for benzylic derivatives of oligophenylene thiols. The values of beta did not depend significantly on applied potential over the range of 0.1 to 1 V. These junctions provide a test bed with which to screen the intrinsic electrical properties of SAMs made up of molecules with different structures; information obtained using these junctions will be useful in correlating molecular structure and rates of electron transport.

Electrons↗

PubMed2000

Stamping of monomeric SAMs as a route to structured crystallization templates: patterned titania films.

Gold-coated glass slides have be patterned by using self-assembled monolayers (SAM) of alkane thiols. Through the use of a special thiol terminated with a styrene monomer, microstructures of 5 to 10 microm width and 70 A height have been formed on the surface by graft polymerization of styrene. These patterned gold slides have then been used to template the precipitation of thin titania films from ethanolic solutions of titanium isopropoxide to create microstructured architectures in the film. Plasmon resonance spectra have established the presence of different steps in the process and have been used to follow the kinetics of the precipitation of titania on the surface. The structured TiO2 films have been characterized by scanning electron microscopy.

Journal Article↗

PubMed2000

Protecting Groups for Thiols Suitable for Suzuki Conditions.

The thiol group is one of the few groups NOT tolerated by the Suzuki reaction. Therefore, a new protective group, the 2-methoxyisobutyryl group, was developed by tuning the electronic/steric properties of the acyl residue. Other thioesters, such as thioacetate, result in a more or less dominant side reaction, which to date has not been described: sulfur-assisted acylation of boronic acids. The reaction pathway for this new reaction is discussed.

Journal Article↗

PubMed1997

Self-Assembly of Mesoscale Objects into Ordered Two-Dimensional Arrays

Regular arrays of topologically complex, millimeter-scale objects were prepared by self-assembly, with the shapes of the assembling objects and the wettability of their surfaces determining the structure of the arrays. The system was composed of solid objects floating at the interface between perfluorodecalin and water and interacting by lateral capillary forces; patterning of the wettability of the surfaces of the objects directs these forces. Self-assembly results from minimization of the interfacial free energy of the liquid-liquid interface. Calculations suggest that this strategy for self-assembly can be applied to objects on a micrometer scale.

Journal Article↗