PubMed Health⌕ Search

Biomedical subjects

A V Kajava

Publications and source records attributed to A V Kajava.

At least 19 recordsLinked to original sources

Interactions of Bax and tBid with lipid monolayers.

The release of cytochrome c from mitochondria to the cytosol is a crucial step of apoptosis that involves interactions of Bax and tBid proteins with the mitochondrial membrane. We investigated Bax and tBid interactions with (i) phosphatidylcholine (PC) monolayer as the main component of the outer leaflet of the outer membrane, (ii) with phosphatidylethanolamine (PE) and phosphatidylserine (PS) that are present in the inner leaflet and (iii) with a mixed PC/PE/Cardiolipin (CL) monolayer of the contact sites between the outer and inner membranes. These interactions were studied by measuring the increase of the lipidic monolayer surface pressure induced by the proteins. Our measurements suggest that tBid interacts strongly with the POPC/DOPE/CL, whereas Bax interaction with this monolayer is about 12 times weaker. Both tBid and Bax interact moderately half as strongly with negatively charged DOPS and non-lamellar DOPE monolayers. TBid also slightly interacts with DOPC. Our results suggest that tBid but not Bax interacts with the PC-containing outer membrane. Subsequent insertion of these proteins may occur at the PC/PE/CL sites of contact between the outer and inner membranes. It was also shown that Bax and tBid being mixed in solution inhibit their insertion into POPC/DOPE/CL monolayer. The known 3-D structures of Bax and Bid allowed us to propose a structural interpretation of these experimental results.

Animals↗

Shift of fibril-forming ability of the designed alpha-helical coiled-coil peptides into the physiological pH region.

Recently, we designed a short alpha-helical fibril-forming peptide (alphaFFP) that can form alpha-helical nanofibrils at acid pH. The non-physiological conditions of the fibril formation hamper biomedical application of alphaFFP. It was hypothesized that electrostatic repulsion between glutamic acid residues present at positions (g) of the alphaFFP coiled-coil sequence prevent the fibrillogenesis at neutral pH, while their protonation below pH 5.5 triggers axial growth of the fibril. To test this hypothesis, we synthesized alphaFFPs where all glutamic acid residues were substituted by glutamines or serines. The electron microscopy study confirmed that the modified alphaFFPs form nanofibrils in a wider range of pH (2.5-11). Circular dichroism spectroscopy, sedimentation, diffusion and differential scanning calorimetry showed that the fibrils are alpha-helical and have elongated and highly stable cooperative tertiary structures. This work leads to a better understanding of interactions that control the fibrillogenesis of the alphaFFPs and opens opportunities for their biomedical application.

Calorimetry↗

Analysis of etoposide binding to subdomains of human DNA topoisomerase II alpha in the absence of DNA.

Epipodophyllotoxins are effective anti-tumor drugs that inhibit eukaryotic DNA topoisomerase II by trapping the enzyme in a covalent complex with DNA. We show that both the recombinant N-terminal ATPase domain and the B'A' core domain of human topoisomerase IIalpha (htopoIIalpha) bind radiolabeled etoposide specifically, even in the absence of DNA. The addition of ATP impairs etoposide binding to the holoenzyme and the N-terminal domain, but not to the core domain. To see if this interference resembles that between novobiocin and ATP in the bacterial GyrB subunit, we modeled the structure of the N-terminal domain of htopoIIalpha and performed molecular docking analysis with etoposide. Mutagenesis of critical amino acids, predicted to stabilize the drug within the N-terminal domain, reveals a less efficient binding of etoposide to the mutated proteins as monitored by direct drug binding assays, although the binding of ATP is not affected.

Adenosine Triphosphate↗

Structure-function analysis of Yersinia pestis YopM's interaction with alpha-thrombin to rule on its significance in systemic plague and to model YopM's mechanism of binding host proteins.

The plague virulence protein YopM of Yersinia pestis KIM5 belongs to the large family of leucine-rich repeat (LRR) proteins. The only activity demonstrated so far for YopM is thrombin-binding, which could be a function of the small amount of YopM that is released into surrounding tissues by the bacteria. This study combined deletional and mutational analysis, chemical crosslinking assays, and in vitro functional tests with molecular modelling to identify key features of YopM necessary for interacting with thrombin. Two Y. pestis strains expressing YopM variants that differed in thrombin binding were used to assess the importance of thrombin-binding for lethality of plague. Both strains suffered a similar decrease in virulence by three orders of magnitude, indicating that thrombin-binding per se was not the major deficiency for lethality in the systemic disease model employed. It remains possible that extracellular YopM could contribute to plague pathology and to early events in peripheral tissues. The structural studies provided a model for how YopM may interact with thrombin and an insight into how YopM's LRR structure may assemble distinct regions for binding different targets.

Amino Acid Sequence↗

The leucine-rich repeat as a protein recognition motif.

Leucine-rich repeats (LRRs) are 20-29-residue sequence motifs present in a number of proteins with diverse functions. The primary function of these motifs appears to be to provide a versatile structural framework for the formation of protein-protein interactions. The past two years have seen an explosion of new structural information on proteins with LRRs. The new structures represent different LRR subfamilies and proteins with diverse functions, including GTPase-activating protein rna1p from the ribonuclease-inhibitor-like subfamily; spliceosomal protein U2A', Rab geranylgeranyltransferase, internalin B, dynein light chain 1 and nuclear export protein TAP from the SDS22-like subfamily; Skp2 from the cysteine-containing subfamily; and YopM from the bacterial subfamily. The new structural information has increased our understanding of the structural determinants of LRR proteins and our ability to model such proteins with unknown structures, and has shed new light on how these proteins participate in protein-protein interactions.

Amino Acid Motifs↗

De novo design of fibrils made of short alpha-helical coiled coil peptides.

BACKGROUND: The alpha-helical coiled coil structures formed by 25-50 residues long peptides are recognized as one of Nature's favorite ways of creating an oligomerization motif. Known de novo designed and natural coiled coils use the lateral dimension for oligomerization but not the axial one. Previous attempts to design alpha-helical peptides with a potential for axial growth led to fibrous aggregates which have an unexpectedly big and irregular thickness. These facts encouraged us to design a coiled coil peptide which self-assembles into soluble oligomers with a fixed lateral dimension and whose alpha-helices associate in a staggered manner and trigger axial growth of the coiled coil. Designing the coiled coil with a large number of subunits, we also pursue the practical goal of obtaining a valuable scaffold for the construction of multivalent fusion proteins. RESULTS: The designed 34-residue peptide self-assembles into long fibrils at slightly acid pH and into spherical aggregates at neutral pH. The fibrillogenesis is completely reversible upon pH change. The fibrils were characterized using circular dichroism spectroscopy, sedimentation diffusion, electron microscopy, differential scanning calorimetry and X-ray fiber diffraction. The peptide was deliberately engineered to adopt the structure of a five-stranded coiled coil rope with adjacent alpha-helices, staggered along the fibril axis. As shown experimentally, the most likely structure matches the predicted five-stranded arrangement. CONCLUSIONS: The fact that the peptide assembles in an expected fibril arrangement demonstrates the credibility of our conception of design. The discovery of a short peptide with fibril-forming ability and stimulus-sensitive behavior opens new opportunities for a number of applications.

Amino Acid Motifs↗

Beta-helix model for the filamentous haemagglutinin adhesin of Bordetella pertussis and related bacterial secretory proteins.

Bordetella pertussis establishes infection by attaching to epithelial cells of the respiratory tract. One of its adhesins is filamentous haemagglutinin (FHA), a 500-A-long secreted protein that is rich in beta-structure and contains two regions, R1 and R2, of tandem 19-residue repeats. Two models have been proposed in which the central shaft is (i) a hairpin made up of a pairing of two long antiparallel beta-sheets; or (ii) a beta-helix in which the polypeptide chain is coiled to form three long parallel beta-sheets. We have analysed a truncated variant of FHA by electron microscopy (negative staining, shadowing and scanning transmission electron microscopy of unstained specimens): these observations support the latter model. Further support comes from detailed sequence analysis and molecular modelling studies. We applied a profile search method to the sequences adjacent to and between R1 and R2 and found additional "covert" copies of the same motifs that may be recognized in overt form in the R1 and R2 sequence repeats. Their total number is sufficient to support the tenet of the beta-helix model that the shaft domain--a 350 A rod--should consist of a continuous run of these motifs, apart from loop inserts. The N-terminus, which does not contain such repeats, was found to be weakly homologous to cyclodextrin transferase, a protein of known immunoglobulin-like structure. Drawing on crystal structures of known beta-helical proteins, we developed structural models of the coil motifs putatively formed by the R1 and R2 repeats. Finally, we applied the same profile search method to the sequence database and found several other proteins--all large secreted proteins of bacterial provenance--that have similar repeats and probably also similar structures.

Adhesins, Bacterial↗

Heart-specific splice-variant of a human mitochondrial ribosomal protein (mRNA processing; tissue specific splicing).

It has been proposed that splice-variants of proteins involved in mitochondrial RNA processing and translation may be involved in the tissue specificity of mitochondrial DNA disease mutations (Fischel-Ghodsian, 1998. Mol. Genet. Metab. 65, 97-104). To identify and characterize the structural components of mitochondrial RNA processing and translation, the Mammalian Mitochondrial Ribosomal Consortium has been formed. The 338 amino acid (aa) residues long MRP-L5 was identified (O'Brien et al., 1999. J. Biol. Chem. 274, 36043-36051), and its transcript was screened for tissue specific splice-variants. Screening of the EST databases revealed a single putative splice-variant, due to the insertion of an exon consisting of 89 nucleotides prior to the last exon. Screening of multiple cDNA libraries revealed this inserted exon to be present only in heart tissue, in addition to the predominant MRP-L5 transcript. Sequencing of this region confirmed the EST sequence, and showed in the splice-variant a termination triplet at the beginning of the last exon. Thus the inserted exon replaces the coding sequence of the regular last exon, and creates a new 353 aa long protein (MRP-L5V1). Sequence analysis and 3D modeling reveal similarity between MRP-L5 and threonyl-t-RNA synthetases, and a likely RNA binding site within MRP-L5, with the C-terminus in proximity to the RNA binding site. Sequence analysis of MRP-L5V1 also suggests a likely transmembrane domain at the C-terminus. Thus it is possible that the MRP-L5V1 C-terminus could interfere with RNA binding and may have gained a transmembrane domain. Further studies will be required to elucidate the functional significance of MRP-L5V1.

Amino Acid Sequence↗

"Fluorescent timer": protein that changes color with time.

We generated a mutant of the red fluorescent protein drFP583. The mutant (E5) changes its fluorescence from green to red over time. The rate of color conversion is independent of protein concentration and therefore can be used to trace time-dependent expression. We used in vivo labeling with E5 to measure expression from the heat shock-dependent promoter in Caenorhabditis elegans and from the Otx-2 promoter in developing Xenopus embryos. Thus, E5 is a "fluorescent timer" that can be used to monitor both activation and down-regulation of target promoters on the whole-organism scale.

Animals↗

alpha-Helical solenoid model for the human involucrin.

Involucrin is a key component of the cross-linked envelope of terminally differentiated keratinocytes. The human molecule largely consists of 10 residue repeats and forms a thin 460 A long rod. Summarized experimental data and a detailed stereochemical analysis made with computer modeling resulted in a structural model for the involucrin molecule. The suggested structure is a left-handed alpha-helical solenoid built of a tandem array of helix-turn-helix folds. The structure enables us to explain the whole set of experimental data and residue conservations within the repeats. It is ideally suited to serve as a scaffold for cell envelope assembly and proposes a possible mode of the intermolecular interactions of involucrin during cell cornification.

Amino Acid Sequence↗

When protein folding is simplified to protein coiling: the continuum of solenoid protein structures.

Solenoid proteins contain repeating structural units that form a continuous superhelix. This category of proteins conveys the least complicated relationship between a sequence and the corresponding three-dimensional structure. Although solenoid proteins are divided into different classes according to commonly used classification schemes, they share many structural and functional properties.

Amino Acid Sequence↗

Suramin blocks nucleotide triphosphate binding to ribosomal protein L3 from Trypanoplasma borreli.

Ribosomal protein L3 (L3) has been demonstrated to participate in formation of the peptidyltransferase center and is essential for its catalytic activity. In the present study we show that L3 is able to bind nucleotide triphosphates with high and specific affinity in vitro. L3 was serendipitously identified by screening of a genomic phage library from a primitive kinetoplastid flagellate Trypanoplasma borreli with the ATPase domain of the topoisomerase II gene as a probe. The cloned gene was overexpressed and purified as a his-tag fusion protein in E. coli. Radioligand binding experiments, using [gamma-35S]ATP, showed that L3 is able to bind ATP but also GTP and UTP with similar high affinity (IC50 50-100 nM), while it has no ATPase activity. Furthermore, we showed that L3 has more than 500-fold higher affinity for nucleotide triphosphates compared to the corresponding nucleotide monophosphates and diphosphates. Molecular genetic and biochemical analyses allowed us to localize the NTP binding domain of L3 to the N-terminal 296 residues. Suramin, a polysulfonated naphthylamine derivative of urea, known for its chemotherapeutic effects completely inhibited the binding of [gamma-35S]ATP at subclinical levels. Results obtained with surface plasmon resonance technology showed that suramin both forms weak multimolecular complexes with L3 and binds strongly to L3 in nearly stoichiometric amounts.

Adenosine Triphosphatases↗

IgE-binding epitopes of enolases, a class of highly conserved fungal allergens.

BACKGROUND: Cladosporium herbarum and Alternaria alternata are two of the most prominent fungal species inducing type I allergy. Previously, we have demonstrated that enolase (Cla h 6) is the second most important allergen of C herbarum in terms of frequency of sensitization. OBJECTIVE: IgE-reactive B-cell epitopes of C herbarum enolase were analyzed, and cross-reactivity between fungal enolases was investigated. METHODS: Cla h 6 glutathione-S-transferase fusion peptides were constructed by means of PCR cloning. A alternata enolase (Alt a 5) was isolated by screening a complementary (c)DNA expression library with a C herbarum enolase DNA probe. RESULTS: Mapping of Cla h 6 IgE-binding epitopes identified a peptide with a length of 69 amino acids (peptide 9), which bound IgE from 8 of 8 patients. Analysis of the conformation of peptide 9 revealed that it does not form a compact structure but rather spans the whole length of the protein, with side chains exposed to solvent at 3 locations. Peptide 9 in the context of Escherichia coli glutathione-S-transferase not only binds IgE but also competitively inhibits IgE binding to Alt a 5. This result indicates that the epitope or epitopes on peptide 9 constitute a major cross-reacting epitope or epitopes on the enolases from C herbarum and A alternata in the case of the one patient tested. CONCLUSIONS: We demonstrated that the glycolytic enzyme enolase is an allergen not only in C herbarum but also in A alternata. Additionally, enolase was shown to exhibit high cross-reactivity to other fungal enolases. On the basis of the results presented here, we propose the use of recombinant Cla h 6 or maybe even peptide 9 of Cla h 6 for diagnosis and possibly therapy of mold allergy.

Allergens↗

The net charge of the first 18 residues of the mature sequence affects protein translocation across the cytoplasmic membrane of gram-negative bacteria.

This statistical study shows that in proteins of gram-negative bacteria exported by the Sec-dependent pathway, the first 14 to 18 residues of the mature sequences have the highest deviation between the observed and expected net charge distributions. Moreover, almost all sequences have either neutral or negative net charge in this region. This rule is restricted to gram-negative bacteria, since neither eukaryotic nor gram-positive bacterial exported proteins have this charge bias. Subsequent experiments performed with a series of Escherichia coli alkaline phosphatase mutants confirmed that this charge bias is associated with protein translocation across the cytoplasmic membrane. Two consecutive basic residues inhibit translocation effectively when placed within the first 14 residues of the mature protein but not when placed in positions 19 and 20. The sensitivity to arginine partially reappeared again 30 residues away from the signal sequence. These data provide new insight into the mechanism of protein export in gram-negative bacteria and lead to practical recommendations for successful secretion of hybrid proteins.

Alkaline Phosphatase↗

Dimorphism of polyglycine I: structural models for crystal modifications.

Re-examination of the known data on crystalline forms of polyglycine reveals that the crystal modification 'polyglycine I' has two different three-dimensional structures depending on the molecular weight. Structural models for both low molecular weight (LMW) and high molecular weight (HMW) polyglycine I crystals are described. In the LMW crystal model, the molecules have an unusual extended conformation generated by alternation of two mirror-symmetrical residual conformations along the chain. The molecules are parallel and each chain forms interpeptide hydrogen bonds with four adjacent chains. The structural model for the HMW crystal represents a composition of twinning crystallites. The crystallites themselves consist of antiparallel enantiomorphous chains united by hydrogen bonds to form rippled sheets. Calculations of the diffraction patterns and packing energy show that these polyglycine I structures have a higher level of conformity with the experimental data than previously suggested models. New insight into the structure of the polyglycine associates opens up the possibility of designing improved silk-like and nylon materials.

Crystallography, X-Ray↗

The open reading frame III product of cauliflower mosaic virus forms a tetramer through a N-terminal coiled-coil.

The open reading frame III product of cauliflower mosaic virus is a protein of 15 kDa (p15) that is essential for the virus life cycle. It was shown that the 34 N-terminal amino acids are sufficient to support protein-protein interaction with the full-length p15 in the yeast two-hybrid system. A corresponding peptide was synthesized and a recombinant p15 was expressed in Escherichia coli and purified. Circular dichroism spectroscopy showed that the peptide and the full-length protein can assume an alpha-helical conformation. Analytical centrifugation allowed to determine that p15 assembles as a rod-shaped tetramer. Oxidative cross-linking of N-terminal cysteines of the peptide generated specific covalent oligomers, indicating that the N terminus of p15 is a coiled-coil that assembles as a parallel tetramer. Mutation of Lys22 into Asp destabilized the tetramer and put forward the presence of a salt bridge between Lys22 and Asp24 in a model building of the stalk. These results suggest a model in which the stalk segment of p15 is located at its N terminus, followed by a hinge that provides the space for presenting the C terminus for interactions with nucleic acids and/or proteins.

Amino Acid Sequence↗

A model of Cdc25 phosphatase catalytic domain and Cdk-interaction surface based on the presence of a rhodanese homology domain.

Mammalian Cdc25 phosphatase is responsible for the dephosphorylation of Cdc2 and other cyclin-dependent kinases at Thr14 and Tyr15, thus activating the kinase and allowing cell cycle progression. The catalytic domain of this dual-specificity phosphatase has recently been mapped to the 180 most C-terminal amino acids. Apart from a CX3R motif, which is present at the active site of all known tyrosine phosphatases, Cdc25 does not share any obvious sequence similarity with any of those enzymes. Until very recently, the Cdc25 family was the only subfamily of tyrosine phosphates for which no three-dimensional structural data were available. Using the generalized profile technique, a sensitive method for sequence database searches, we found an extended and highly significant sequence similarity between the Cdc25 catalytic domain and similarly sized regions in other proteins: the non-catalytic domain of two distinct families of MAP-kinase phosphates, the non-catalytic domain of several ubiquitin protein hydrolases, the N and C-terminal domain of rhodanese, and a large and heterogeneous groups of stress-response proteins from all phyla. The relationship of Cdc25 to the structurally well-characterized rhodanese spans the entire catalytic domain and served as template for a structural model for human Cdc25a, which is fundamentally different from previously suggested models for Cdc25 catalytic domain organization. The surface positioning of subfamily-specific conserved residues allows us to predict the sites of interaction with Cdk2, a physiological target of Cdc25a. Based on the results of this analysis, we also predict that the budding yeast arsenate resistance protein Acr2 and the ORF Ygr203w encode protein phosphatases with catalytic properties similar to that of the Cdc25 family. Recent determination of the crystal structure of the Cdc25a catalytic domain supports the validity of the model and demonstrates the power of the generalized sequence profile technique in homology-based modeling of the three-dimensional structure of a protein having a weak but significant sequence similarity with a structurally characterized protein.

Amino Acid Sequence↗

Denaturation of type I collagen fibrils is an endothermic process accompanied by a noticeable change in the partial heat capacity.

Thermal transitions of type I collagen fibrils were investigated by differential scanning calorimetry and spectrophotometry of turbidity within a wide range of external conditions. The advanced microcalorimeter allowed us to carry out the measurements at low concentrations of collagen (0.15-0.3 mg/mL). At these concentrations of collagen and under fibril-forming conditions, the melting curves display two pronounced heat adsorption peaks (at 40 and 55 degreesC). The low-temperature peak was assigned to the melting of monomeric collagen, while the high-temperature peak was assigned to the denaturation of collagen fibrils. It was shown that the denaturation of fibrils, in contrast to the monomeric collagen, is accompanied by a noticeable change in the partial specific heat capacity. Surprisingly, comparison of the collagen calorimetric curves in the fibril-forming and nonforming conditions revealed that DeltaCp of fibril denaturation is caused by a decrease in the Cp of collagen at premelting temperatures. This suggests the existence of an intermediate structural state of collagen in a transparent solution preceding fibril formation. Our study also shows that collagen fibrils formed prior to heating have thermodynamic parameters different from those of fibrils formed and denatured during heating in the calorimeter. Analysis of the data allowed us to determine the denaturation enthalpy of the mature fibrils and to conclude that the enthalpy plays a more important role in fibril stabilization than was previously assumed. The observed large DeltaCp value of fibril denaturation as well as the difference between thermodynamic parameters of the mature and newly formed fibrils is readily explained by the presence of water molecules in the fibril structure.

Absorption↗