PubMed Health⌕ Search

Biomedical subjects

A Van Loey

Publications and source records attributed to A Van Loey.

16 recordsLinked to original sources
PubMed2004

Purified tomato polygalacturonase activity during thermal and high-pressure treatment.

Extracted tomato polygalacturonase was purified by cation-exchange chromatography (and gel filtration) and characterized for molar mass, isoelectric point, as well as optimal pH for polygalacturonase activity. The enzymatic reaction of purified tomato polygalacturonase on polygalacturonic acid as substrate was investigated during a combined high-pressure/temperature treatment in a temperature range of 25 degrees to 80 degrees C and in a pressure range of 0.1 to 500 MPa at pH 4.4 (the pH of tomato-based products). The optimal temperature for initial tomato polygalacturonase activity in the presence of polygalacturonic acid at atmospheric pressure is about 55 degrees to 60 degrees C. The optimal temperature for initial tomato polygalacturonase activity during processing shifted to lower values at elevated pressure as compared with atmospheric pressure, and the catalytic activity of pure tomato polygalacturonase decreased with increasing pressure, which was mostly pronounced at higher temperatures. The elution profiles of the degradation products on high-performance anion-exchange chromatography indicated that for both thermal and high-pressure treatment all oligomers were present in very small amounts in the initial stage of polygalacturonase activity. The amounts of monomer and small oligomers increased with increasing incubation times, whereas the amount of larger oligomers decreased due to further degradation.

Enzyme Activation↗
PubMed2004

Comparative study on pressure and temperature stability of 5-methyltetrahydrofolic acid in model systems and in food products.

A comparative study on the pressure and temperature stability of 5-methyltetrahydrofolic acid (5-CH(3)-H(4)folate) was performed in model/buffer systems and food products (i.e., orange juice, kiwi puree, carrot juice, and asparagus). Effects of pH and ascorbic acid (0.5 mg/g) on 5-CH(3)-H(4)folate stability in buffer systems were studied on a kinetic basis at different temperatures (from 65 to 160 degrees C) and different pressure/temperature combinations (from 100 to 700 MPa/from 20 to 65 degrees C). These studies showed that (i) the degradation of 5-CH(3)-H(4)folate in all model systems could be described by first-order reaction kinetics, (ii) the thermostability of 5-CH(3)-H(4)folate was enhanced by increasing pH up to 7, (iii) 5-CH(3)-H(4)folate was relatively pressure stable at temperatures lower than 40 degrees C, and (iv) ascorbic acid enhanced both the thermo- and barostabilities of 5-CH(3)-H(4)folate. In food products, temperature and pressure stabilities of 5-CH(3)-H(4)folate were studied at different temperatures (70-120 degrees C) and different pressure/temperature combinations (from 50 to 200 MPa/25 degrees C and 500 MPa/60 degrees C). 5-CH(3)-H(4)folate in orange juice and kiwi puree was relatively temperature (up to 120 degrees C) and pressure (up to 500 MPa/60 degrees C) stable in contrast to carrot juice and asparagus. Addition of ascorbic acid (0.5 mg/g) in carrot juice resulted in a remarkable protective effect on pressure (500 MPa/60 degrees C/40 min) and temperature degradation (120 degrees C/40 min) of 5-CH(3)-H(4)folate.

Ascorbic Acid↗
PubMed2004

High pressure thermal inactivation kinetics of a plasmin system.

A crude plasmin extract was prepared from milk by ultracentrifugation and was partially purified using ammonium sulfate precipitation. Isothermal and high-pressure inactivation of this plasmin system at pH 6.7 could be described by a first-order kinetic model. As expected, the plasmin system displayed a high thermostability. High-pressure treatments were conducted in the 300- to 800-MPa pressure range, combined with temperatures from 25 to 65 degrees C. The plasmin system was very pressure stable at room temperature, but inactivation occurred with combined high-pressure/temperature-treatments. The influence of temperature at different constant pressures on the inactivation rate constant was quantified using the Arrhenius equation. At all temperatures studied, a synergistic effect of temperature and high pressure was observed in the 300- to 600-MPa pressure range. However, an antagonistic effect of temperature and pressure appeared at pressures above 600 MPa.

Animals↗
PubMed2004

Mathematical models for combined high pressure and thermal plasmin inactivation kinetics in two model systems.

The combined high-pressure thermal inactivation kinetics of plasmin was studied in 2 model systems. The first system contained both plasmin and plasminogen, whereas, in the second system, all plasminogen was converted into plasmin, with urokinase, before the inactivation studies. High-pressure treatments were conducted in the range of 300 to 800 MPa combined with temperatures from 30 to 65 degrees C. Under all conditions of pressure and temperature (isobaric-isothermal) studied, for both systems, first-order inactivation was observed. A third-degree polynomial model (derived from thermodynamic principles) successfully described the temperature and pressure dependence of the inactivation rate constant over the entire experimental domain. The antagonistic effect and the stabilization effect observed above a threshold pressure value of 600 MPa were thought to be related to the disruption of disulfide bonds in plasmin and plasminogen.

Animals↗
PubMed2003

Effects of combined pressure and temperature on enzymes related to quality of fruits and vegetables: from kinetic information to process engineering aspects.

Throughout the last decade, high pressure technology has been shown to offer great potential to the food processing and preservation industry in delivering safe and high quality products. Implementation of this new technology will be largely facilitated when a scientific basis to assess quantitatively the impact of high pressure processes on food safety and quality becomes available. Besides, quantitative data on the effects of pressure and temperature on safety and quality aspects of foods are indispensable for design and evaluation of optimal high pressure processes, i.e., processes resulting in maximal quality retention within the constraints of the required reduction of microbial load and enzyme activity. Indeed it has to be stressed that new technologies should deliver, apart from the promised quality improvement, an equivalent or preferably enhanced level of safety. The present paper will give an overview from a quantitative point of view of the combined effects of pressure and temperature on enzymes related to quality of fruits and vegetables. Complete kinetic characterization of the inactivation of the individual enzymes will be discussed, as well as the use of integrated kinetic information in process engineering.

Consumer Product Safety↗
PubMed2002

Purification, characterization, thermal, and high-pressure inactivation of pectin methylesterase from bananas (cv Cavendish).

Pectin methylesterase (PME) was extracted from bananas (cv Cavendish) and purified by affinity chromatography on a CNBr-Sepharose-PME inhibitor (PMEI) column. A single protein and PME activity peak was obtained. For banana PME, a biochemical characterization in terms of molar mass (MM), pI, and kinetic parameters was performed. In a second step, the thermal and high-pressure stability of the enzyme was studied. Isothermal inactivation of purified banana PME could be described by a first-order kinetic model in a temperature range of 65 degrees to 72.5 degrees C, whereas its isobaric-isothermal inactivation followed a fractional-conversion model. Banana PME was found to be more thermally stable compared with PMEs extracted from orange, tomato, and apple.

Carboxylic Ester Hydrolases↗
PubMed1996

Covalent enzyme immobilization on paramagnetic polyacrolein beads.

An optimized procedure of covalent glucose oxidase, urease, Bacillus subtilis alpha-amylase and Bacillus licheniformis alpha-amylase immobilization on paramagnetic, non-porous, polyacrolein beads is presented. The resulting insolubilized enzymes can be employed for extended periods of time without loss of activity. The conditions were optimized for maximizing the activity of the linked enzyme. Coated beads bearing up to 15 micrograms active enzyme/mg(beads) were obtained on reproducible basis. The paramagnetic feature of the particles facilitates the enzyme handling. In the magnetic field, the enzyme separation is fast and complete. Thus, the paramagnetic beads represent an excellent carrier for immobilized enzymes.

Acrolein↗
PubMed1996

Potential Bacillus subtilis alpha-amylase-based time-temperature integrators to evaluate pasteurization processes.

Thermal inactivation kinetics of Bacillus subtilis alpha-amylase (BSA) in different environmental conditions was studied by performing isothermal experiments. As a response property, residual enzymic activity and residual heat of enzyme deterioration were chosen. A comparison of processing values determined from the read-out of a system with actual integrated processing values revealed the potentials of these systems as time-temperature integrators to be used in the pasteurization domain (temperatures of 70 to 100 degrees C) for target attributes with z-values ranging from 6 to 12 degrees C.

Bacillus subtilis↗
PubMed1995

Evaluation of the integrated time-temperature effect in thermal processing of foods.

In this review, current methods used to evaluate the integrated impact of time and temperature upon preserving a food product by a heat treatment are considered. After identifying the basic premise any preservation scheme shall meet, the central role of a feasible description for the heat activation kinetics of microorganisms, their spores, and other quality attributes are stressed. Common concepts to quantify a thermal process are presented. Shortcomings of the prevalent evaluation methods are highlighted and attention is given to the development, restrictions, and possibilities of time-temperature-integrators as "new" evaluation tools to measure the impact of a "classical" in-pack heat treatment and more modern heating techniques such as continuous processing of solid/liquid mixtures on foods.

Food Handling↗