PubMed Health⌕ Search

Biomedical subjects

A Wegner

Publications and source records attributed to A Wegner.

At least 19 recordsLinked to original sources
PubMed1995

Coactosin interferes with the capping of actin filaments.

Coactosin, a 16 kDa protein associated with the actin cytoskeleton from Dictyostelium discoideum, was purified by an improved method, in which other components of the cytoskeleton were removed. The highly purified coactosin had no effect on the time course of actin polymerization, but when added to actin in presence of capping proteins, coactosin counteracted the capping activity of these proteins. The capping proteins cap32/34 and severin domain 1 retarded actin polymerization, on addition of coactosin to samples containing one of these capping proteins the time course of actin polymerization became close to controls without capping proteins.

Actins↗
PubMed1995

Two low-affinity Ca(2+)-binding sites of gelsolin that regulate association with actin.

The time course of binding of actin to gelsolin or 1:1 gelsolin-actin complex was measured at defined Ca2+ concentrations in the range 0.5-500 microM. The rate of association was followed by the fluorescence increase of a fluorescent label covalently linked to actin. Free Ca2+ was determined by titration with EGTA in the presence of Fura-2 as indicator. The experimental data were quantitatively evaluated by calculations of the kinetics of association of actin with gelsolin thereby taking into account the equilibrium of binding of Ca2+ ions to gelsolin. It was found that association of gelsolin with one actin monomer is regulated by a Ca(2+)-binding site with a dissociation constant Kd1 = 25 microM. Binding of the second actin monomer was found to be controlled by a Ca(2+)-binding site of which the dissociation constant Kd2 was 200 microM. Mg2+ ions in the concentration range 0-1 mM did not compete with Ca2+ for binding to gelsolin. More complex interactions of gelsolin with actin such as nucleated actin polymerization were found to occur even at Ca2+ concentrations below Kd1 (e.g. 10 microM) at almost maximal rates.

Actins↗
PubMed1993

Strategies for nonradioactive methods in the localization of phosphorylated amino acids in proteins.

Identification of O-phosphorylated amino acids within the primary structure of regulatory proteins is important in understanding the mechanisms by which their functions are regulated. In many cases radioactive labeling with [32P]phosphate is tedious or sometimes impossible. Therefore, we have established a series of new non-radioactive methods that permit the localization of phosphoserine, phosphothreonine, and phosphotyrosine. After partial hydrolysis of a phosphopeptide or phosphoprotein, phosphoserine, phosphothreonine, or phosphotyrosine are determined by capillary electrophoresis as their dabsyl-derivatives. Chemical modification transforms phosphoserine or phosphothreonine to S-ethyl-cysteine or beta-methyl-S-ethyl-cysteine, respectively, allowing their localization during sequence analysis. We apply solid-phase sequencing to overcome the limitations of the gas-phase sequenator in the case of phosphotyrosine-containing peptides. Liquid chromatography on-line connected to an electrospray mass spectrometer is a powerful new method of increasing importance in the protein chemistry field. It is especially well suited for identification of phosphoserine- or phosphothreonine-containing peptides in a proteolytic digest of a phosphoprotein. In this article we will describe how to work with these new methods practically.

Amino Acid Sequence↗
PubMed1992

Occurrence of an actin-inserting domain in tensin.

We have previously described a protein called "insertin" that binds strongly to barbed ends of actin filaments and permits polymerization of actin filaments by insertion of actin monomers between the barbed ends and barbed end-bound insertin. We determined the amino acid sequence of insertin and found that the primary structure of insertin is almost identical to amino acid residues 862 to 1212 of the actin-binding protein tensin.

Actins↗
PubMed1992

Gelsolin binds to polymeric actin at a low rate.

Association of gelsolin with actin filament subunits was investigated by the decrease of the fluorescence intensity of a 7-nitro-2-oxa-1,3-diazole (NBD) label covalently linked to gelsolin. The rate constant of this reaction was found to be 4 x 10(3) M-1 s-1. Binding of NBD-labeled gelsolin to monomeric actin proceeds at a similar low rate. The rate of association of gelsolin that was unmodified to actin filament subunits was estimated too. Unmodified gelsolin was added to a mixture of actin filaments and actin-DNase I complex. The fractions of gelsolin that bound to actin filament subunits or to actin-DNase I complex depended on the relative rates of these two competing reactions. In this way it was possible to estimate the rate constant of association of unmodified gelsolin with actin filament subunits (2 x 10(4) M-1 s-1). Thus, gelsolin associates with actin filament subunits at a rate that is considerably slower than diffusion-controlled and similar to the rate of binding of gelsolin to monomeric actin.

Actins↗
PubMed1992

ADP-ribosylation of gelsolin-actin complexes by clostridial toxins.

ADP-ribosylation of the 1:1 (G-A) and 1:2 (G-A-A) gelsolin-actin complexes by Clostridium perfringens iota toxin and Clostridium botulinum C2 toxin was studied. Iota toxin ADP-ribosylated actin in the G-A complex from human platelets as effectively as skeletal muscle actin. The Km for NAD (4 microM) was identical for both substrates. C2 toxin ADP-ribosylated actin in the G-A complex with lower efficacy than nonmuscle actin from platelet cytosol. In the G-A-A complex both actin molecules were ADP-ribosylated by iota toxin. The G-A complex bound ADP-ribosylated actin (Ar) to form the G-A-Ar complex in which the weakly bound actin is ADP-ribosylated. Vice versa, ADP-ribosylated 1:1 gelsolin-actin complex (G-Ar) was able to bind unmodified actin to yield the G-Ar-A complex. ADP-ribosylation did not change the nucleation activity of either the G-Ar complex or the G-Ar-A complex. When monomeric actin was added to the G-A-Ar complex, polymerization of actin was delayed by about 10 min. According to a quantitative kinetic analysis, the delay of polymerization corresponded to the rate of dissociation of ADP-ribosylated actin from the G-A-Ar complex. This suggests that the nucleation activity of the G-A-A complex is inhibited by ADP-ribosylation of the weakly bound actin and that the inhibition can be removed by dissociation of ADP-ribosylated actin from the G-A-Ar complex.

ADP Ribose Transferases↗
PubMed1992

Mechanisms of the cytopathic action of actin-ADP-ribosylating toxins.

Clostridium botulinum C2 toxin, Clostridium perfringens iota toxin, and Clostridium spiroforme toxin ADP-ribosylate actin monomers. Toxin-induced ADP-ribosylation disturbs the cellular equilibrium between monomeric and polymeric actin and traps monomeric actin in its unpolymerized form, thereby depolymerizing actin filaments and destroying the microfilament network. Furthermore, the toxins ADP-ribosylate gelsolin actin complexes. These modifications may contribute to the cytopathic action of the toxins.

Actins↗
PubMed1991

Rate constants and equilibrium constants for binding of actin to the 1:1 gelsolin-actin complex.

The rate constant and equilibrium constant of association of an actin monomer with 1:1 gelsolin-actin complex isolated from chicken were measured by using fluorescently labeled actin. According to fluorescence stopped-flow experiments, the rate constant of formation of the 1:2 gelsolin-actin complex from 1:1 gelsolin-actin complex and actin was found to be about 2 x 10(7) M-1 s-1 under conditions where gelsolin binds Ca2+. The rate of dissociation of one actin molecule from the 1:2 gelsolin-actin complex was determined by exchange of actin for fluorescently labeled actin. The rate constant of dissociation was about 0.02 s-1. Thus, the equilibrium constant for association of actin with 1:1 gelsolin-actin complex can be calculated to be in the range of 10(9) M-1. The rate of dissociation of actin from 1:2 gelsolin-actin complex was independent of the Ca2+ concentration. Ca2+ affects only the rate of association of actin with 1:1 gelsolin-actin complex.

Actins↗
PubMed1991

Random copolymerization of ATP-actin and ADP-actin.

The equilibrium of the copolymerization of ATP-actin and ADP-actin was investigated by an analysis of the critical concentrations of mixtures of ATP-actin and ADP-actin. The molar ratio of bound ATP to bound ADP was controlled by the ratio of free ATP and ADP. The experiments were performed under conditions (100 mM KCl, l mM MgCl2, pH 7.5, 25 degrees C) where the ATP hydrolysis following binding of actin monomers to barbed filament ends was so slow that the distribution of ATP or ADP bound to the subunits near the ends of filaments was not affected by ATP hydrolysis. According to the analysis of the critical concentrations, the equilibrium constants for incorporation of ATP-actin or ADP-actin into filaments were independent of the type of nucleotide bound to contiguous subunits.

Actins↗
PubMed1991

Rate and mechanism of the assembly of tropomyosin with actin filaments.

The rate of assembly of tropomyosin with actin filaments was measured by stopped-flow experiments. Binding of tropomyosin to actin filaments was followed by the change of the fluorescence intensity of a (dimethylamino)naphthalene label covalently linked to tropomyosin and by synchrotron radiation X-ray solution scattering. Under the experimental conditions (2 mM MgCl2, 100 mM KCl, pH 7.5, 25 degrees C) and at the protein concentrations used (2.5-24 microM actin, 0.2-3.4 microM tropomyosin) the half-life time of assembly of tropomyosin with actin filaments was found to be less than 1 s. The results were analyzed quantitatively by a model in which tropomyosin initially binds to isolated sites. Further tropomyosin molecules bind contiguously to bound tropomyosin along the actin filaments. Good agreement between the experimental and theoretical time course of assembly was obtained by assuming a fast preequilibrium between free and isolatedly bound tropomyosin.

Actins↗
PubMed1991

Binding of sugar phosphates, inositol phosphates and phosphorylated amino acids to actin.

Binding of biological phosphate compounds to actin was investigated by the effect of these compounds on the critical concentration of the pointed ends of gelsolin-capped actin filaments. According to this assay millimolar concentrations of glucose 6-phosphate and the bisphosphorylated sugars fructose 1,6-bisphosphate, fructose 2,6-bisphosphate, glucose 1,6-bisphosphate, sedoheptulose 1,7-bisphosphate and 2,3-bisphosphoglycerate were found to associate with actin. Glycerophosphoinositol phosphates bound to actin if they were present in millimolar concentrations, and if carbon atom 4 of the inositol ring was phosphorylated and carbon atom 5 was free of phosphate. Also phosphoserine and phosphotyrosine were found to interact with actin. Most of the actin-binding compounds stabilized actin filaments by decreasing the critical concentration suggesting that these compounds had a higher affinity for the subunits along actin filaments than for actin monomers. However, 2,3-bisphosphoglycerate and fructose 2,6-bisphosphate increased the critical concentration probably because these sugar phosphates bound to actin monomers thereby inhibiting actin polymerization.

Actins↗
PubMed1991

Mechanism of the insertion of actin monomers between the barbed ends of actin filaments and barbed end-bound insertin.

Insertin, a protein purified from chicken gizzard smooth muscle, has been shown to retard but not to inhibit actin polymerization at the barbed ends of actin filaments. This effect has been explained by a model in which insertin remains bound to the barbed ends of actin filaments and new actin molecules are inserted into filaments between the barbed ends and barbed end-bound insertin molecules. In this paper we discuss the mechanism of the insertion reaction on a molecular level. A number of simple models were devised and were judged by their agreement with available experimental data. In one class of models insertin was assumed to dissociate from filament ends and to re-associate with the ends. Actin monomers would then bind to a filament end between a dissociation and an association reaction of insertin. In one of the two proposed models in this class insertin binds to an ATP-containing terminal subunit with higher affinity than to an ADP-containing terminal subunit. Dissociation of insertin is brought about by ATP hydrolysis at the terminal filament subunit. Insertion was then thought to re-associate with a filament end following binding of an ATP-containing actin monomer to the filament end. In the other of the two models' insertin was assumed to occur in two conformations which bind to filament ends with different affinities. Association and dissociation of insertin is caused by interconversion between the two forms of insertin. Both models turned out to be incompatible with experimental data. All types of models in which retardation of actin polymerization is brought about by dissociation and re-association of insertin with filament ends can be excluded by a common argument. As 10 nM insertin retards polymerization of 2 microns monomeric actin with maximal efficiency, the rate constant of binding of insertin to a filament end must be considerably higher (greater than 2 microM/10 nM = 200-fold). As the rate of association of actin with a barbed end is almost diffusion-controlled, assembly of insertin with a filament end would have to exceed the rate of a diffusion-controlled reaction. In the other class of models it was assumed that insertin remains permanently bound to filament ends during association or dissociation of an actin molecule and to move towards the terminal subunit of filaments. These models are compatible with experimental data. Thus, models are favoured where insertin remains bound to filament ends during polymerization and depolymerization of actin.

Actin Cytoskeleton↗
PubMed1990

De-ADP-ribosylation actin by Clostridium perfringens iota-toxin and Clostridium botulinum C2 toxin.

The reverse reaction of the ADP-ribosylation of actin by Clostridium botulinum C2 toxin and Clostridium perfringens iota-toxin was studied. In the presence of nicotinamide (30-50 mM) C2 toxin and iota-toxin decreased the radioactive labeling of [32P]ADP-ribosylated actin and catalyzed the formation of [32P]NAD. The pH optima for both reactions were 5.5-6.0. Concomitant with the removal of ADP-ribose, the ability of actin to polymerize was restored and actin ATPase activity increased. Neither ADP-ribosylation nor removal of ADP-ribose was observed after treatment of actin with EDTA, indicating that the native structure of actin is required for both reactions. ADP-ribosylation of platelet actin by C2 toxin was reversed by iota-toxin, confirming recent reports that both toxins modify the same amino acid in actin. However, C. botulinum C2 toxin was not able to cleave ADP-ribose from skeletal muscle actin which had been incorporated by iota-toxin, corroborating the different substrate specificities of both toxins.

ADP Ribose Transferases↗
PubMed1990

Tropomyosin-troponin complex stabilizes the pointed ends of actin filaments against polymerization and depolymerization.

In striated muscle the pointed ends of polar actin filaments are directed toward the center of the sarcomere. Formed filaments keep a constant length of about 1 micron. As polymerization and depolymerization at free pointed ends are not sufficiently slow to account for the constant length of the filaments, we searched for proteins which occur in sarcomeres and can stabilize the pointed ends of actin filaments. We observed that tropomyosin-troponin complex reduces the rate of association and dissociation of actin molecules at the pointed ends more than 30-fold. On the average, every 600 s one association or dissociation reaction has been found to occur at the pointed ends near the critical actin monomer concentration.

Actin Depolymerizing Factors↗
PubMed1990

Antibody mapping of functional domains in vinculin.

We have analyzed the functional domain structure of vinculin, a protein involved in linking microfilaments to the cytoplasmic face of cell membranes in animal cells. For this purpose, we used several monoclonal antibodies raised against chicken gizzard vinculin whose epitopes could be assigned to discrete regions in the vinculin sequence by immunoblotting of proteolytic fragments combined with N-terminal amino acid sequencing. Two of these antibodies induced the disruption of stress fibers and changed the number of morphology of focal contacts after microinjection in chicken embryo fibroblasts. Based on the location of its epitope in comparison with vinculin domains previously identified by other groups, we propose that one of these antibodies (15B7) interferes with the binding of vinculin to talin, the most peripheral of the microfilament proteins. The second antibody (14C10) binds within a region comprising three internal repeats and might therefore distort the inner architecture of vinculin. A third antibody (As3) inhibited the binding of F-actin to vinculin in an in vitro assay but had no effect on the microfilament system in cells. These data emphasize the role of vinculin as a key protein in microfilament-membrane linkage and support previous work on a direct interaction between vinculin and actin.

Actins↗
PubMed1989

Kinetic evidence for insertion of actin monomers between the barbed ends of actin filaments and barbed end-bound insertin, a protein purified from smooth muscle.

An actin polymerization-retarding protein was isolated from chicken gizzard smooth muscle. This protein copurified with vinculin on DEAE-cellulose and gel filtration columns. The polymerization-retarding protein could be separated from vinculin by hydroxylapatite chromatography. The isolated polymerization-retarding protein lost its activity within a few days, but was stable for weeks when it was not separated from vinculin. We termed the polymerization-retarding protein "insertin". Because of the instability of the isolated insertin, we investigated the effect of insertin-vinculin on actin polymerization. Insertin-vinculin retarded nucleated actin polymerization maximally fivefold. Polymerization at the pointed ends of gelsolin-capped actin filaments was not affected by insertin-vinculin, suggesting that insertin-vinculin binds to the barbed ends, but not to the pointed ends, of actin filaments. Retarded polymerization was observed even if the actin monomer concentration was between the critical concentrations of the ends of treadmilling actin filaments. As at this low monomer concentration the pointed ends depolymerize, monomers appeared to be inserted at the barbed ends between the terminal subunit and barbed end-bound insertin molecules. Insertin-vinculin was found not to increase the actin monomer concentration to the value of the pointed ends. These observations support the conclusion that insertin is not a barbed end-capping protein but an actin monomer-inserting protein. According to a quantitative analysis of the kinetic data, all observations could be explained by a model in which two insertin molecules were assumed to bind co-operatively to the barbed ends of actin filaments. Actin monomers were found to be inserted between the barbed ends and barbed end-bound insertin molecules at a rate of about 1 x 10(6) M-1 s-1. Insertin may be an essential part of the machinery of molecules that permit treadmilling of actin filaments in living cells by insertion of actin molecules between membranes and actin filaments.

Actins↗
PubMed1989

Nonmuscle actin ADP-ribosylated by botulinum C2 toxin caps actin filaments.

The effect of nonmuscle actin ADP-ribosylated by botulinum C2 toxin on the polymerization of nonmuscle actin was investigated in order to clarify whether nonmuscle actin is converted into a capping protein by ADP-ribosylation. ADP-ribosylated actin was found to decrease the rate of polymerization of actin filaments which are free at both ends. ADP-ribosylated actin turned out to have no effect on the rate or extent of polymerization at the pointed ends of actin filaments the barbed ends of which were capped by gelsolin. The monomer concentration reached at the final stage of polymerization was similar to the critical concentration of the pointed ends of actin filaments. The results suggest that nonmuscle actin ADP-ribosylated by botulinum C2 toxin acts as a capping protein which binds to the barbed ends to inhibit polymerization.

Actin Depolymerizing Factors↗