PubMed Health⌕ Search

Biomedical subjects

A den Boer

Publications and source records attributed to A den Boer.

At least 19 recordsLinked to original sources
PubMed2001

"Edge Effect" of (32)p radioactive stents is caused by the combination of chronic stent injury and radioactive dose falloff.

BACKGROUND: Radioactive stents have been reported to reduce in-stent neointimal thickening. An unexpected increase in neointimal response was observed, however, at the stent-to-artery transitions, the so-called "edge effect." To investigate the factors involved in this edge effect, we studied stents with 1 radioactive half and 1 regular nonradioactive half, thereby creating a midstent radioactive dose-falloff zone next to a nonradioactive stent-artery transition at one side and a radioactive stent-artery transition at the other side. METHODS AND RESULTS: Half-radioactive stents (n=20) and nonradioactive control stents (n=10) were implanted in the coronary arteries of Yucatan micropigs. Animals received aspirin and clopidogrel as antithrombotics. After 4 weeks, a significant midstent stenosis was observed by angiography in the half-radioactive stents. Two animals died suddenly because of coronary occlusion at this mid zone at 8 and 10 weeks. At 12-week follow-up angiography, intravascular ultrasound and histomorphometry showed a significant neointimal thickening at the midstent dose-falloff zone of the half-radioactive stents, but not at the stent-to-artery transitions at both extremities. Such a midstent response (mean angiographic late loss 1.0 mm) was not observed in the nonradioactive stents (mean loss 0.4 to 0.6 mm; P< 0.01). CONCLUSIONS: The edge effect of high-dose radioactive stents in porcine coronary arteries is associated with the combination of stent injury and radioactive dose falloff.

Animals↗
PubMed2001

Real-time quantification and display of skin radiation during coronary angiography and intervention.

BACKGROUND: Radiographically guided investigations may be associated with excessive radiation exposure, which may cause skin injuries. The purpose of this study was to develop and test a system that measures in real time the dose applied to each 1-cm(2) area of skin, taking into account the movement of the x-ray source and changes in the beam characteristics. The goal of such a system is to help prevent high doses that might cause skin injury. METHODS AND RESULTS: The entrance point, beam size, and dose at the skin of the patient were calculated by use of the geometrical settings of gantry, investigation table, and x-ray beam and an ionization chamber. The data are displayed graphically. Three hundred twenty-two sequential cardiac investigations in adult patients were analyzed. The mean peak entrance dose per investigation was 0.475 Gy to a mean skin area of 8.2 cm(2). The cumulative KERMA-area product per investigation was 52.2 Gy/cm(2) (25.4 to 99.2 Gy/cm(2)), and the mean entrance beam size at the skin was 49.2 cm(2). Twenty-eight percent of the patients (90/322) received a maximum dose of <1 Gy to a small skin area ( approximately 6 cm(2)), and 13.5% of the patients (42/322) received a maximum dose of >2 Gy. CONCLUSIONS: Monitoring of the dose distribution at the skin will alert the operator to the development of high-dose areas; by use of other gantry settings with nonoverlapping entrance fields, different generator settings, and extra collimation, skin lesion can be avoided.

Adult↗
PubMed1999

beta-Particle-emitting radioactive stent implantation. A safety and feasibility study.

BACKGROUND: This study represents the Heart Center Rotterdam's contribution to the Isostents for Restenosis Intervention Study, a nonrandomized multicenter trial evaluating the safety and feasibility of the radioactive Isostent in patients with single coronary artery disease. Restenosis after stent implantation is primarily caused by neointimal hyperplasia. In animal studies, beta-particle-emitting radioactive stents decrease neointimal hyperplasia by inhibiting smooth muscle cell proliferation. METHODS AND RESULTS: The radioisotope (32)P, a beta-particle emitter with a half-life of 14.3 days, was directly embedded into the Isostent. The calculated range of radioactivity was 0.75 to 1.5 microCi. Quantitative coronary angiography measurements were performed before and after the procedure and at 6-month follow-up. A total of 31 radioactive stents were used in 26 patients; 30 (97%) were successfully implanted, and 1 was embolized. Treated lesions were in the left anterior descending coronary artery (n=12), the right coronary artery (n=8), or the left circumflex coronary artery (n=6). Five patients received additional, nonradioactive stents. Treated lesion lengths were 13+/-4 mm, with a reference diameter of 2.93+/-0. 47 mm. Minimum lumen diameter increased from 0.87+/-0.28 mm preprocedure to 2.84+/-0.35 mm postprocedure. No in-hospital adverse cardiac events occurred. All patients received aspirin indefinitely and ticlopidine for 4 weeks. Twenty-three patients (88%) returned for 6-month angiographic follow-up; 17% of them had in-stent restenosis, and 13% had repeat revascularization. No restenosis was observed at the stent edges. Minimum lumen diameter at follow-up averaged 1.85+/-0.69 mm, which resulted in a late loss of 0.99+/-0. 59 mm and a late loss index of 0.53+/-0.35. No other major cardiac events occurred during the 6-month follow-up. CONCLUSIONS: The use of radioactive stents with an activity of 0.75 to 1.5 microCi is safe and feasible.

Adult↗
PubMed1999

Geometric vascular remodeling after balloon angioplasty and beta-radiation therapy: A three-dimensional intravascular ultrasound study.

BACKGROUND: Endovascular radiation appears to inhibit intimal thickening after overstretching balloon injury in animal models. The effect of brachytherapy on vascular remodeling is unknown. The aim of the study was to determine the evolution of coronary vessel dimensions after intracoronary irradiation after successful balloon angioplasty in humans. METHODS AND RESULTS: Twenty-one consecutive patients treated with balloon angioplasty and beta-radiation according to the Beta Energy Restenosis Trial-1.5 were included in the study. Volumetric assessment of the irradiated segment and both edges was performed after brachytherapy and at 6-month follow-up. Intravascular ultrasound images were acquired by means of ECG-triggered pullback, and 3-D reconstruction was performed by automated edge detection, allowing the calculation of lumen, plaque, and external elastic membrane (EEM) volumes. In the irradiated segments, mean EEM and plaque volumes increased significantly (451+/-128 to 490.9+/-159 mm(3) and 201.2+/-59 to 241.7+/-74 mm(3); P=0.01 and P=0.001, respectively), whereas luminal volume remained unchanged (250.8+/-91 to 249.2+/-102 mm(3); P=NS). The edges demonstrated an increase in mean plaque volume (26.8+/-12 to 32. 6+/-10 mm(3), P=0.0001) and no net change in mean EEM volume (71. 4+/-24 to 70.9+/-24 mm(3), P=NS), resulting in a decrease in mean luminal volume (44.6+/-16 to 38.3+/-16 mm(3), P=0.01). CONCLUSIONS: A different pattern of remodeling is observed in coronary segments treated with beta-radiation after successful balloon angioplasty. In the irradiated segments, the adaptive increase of EEM volume appears to be the major contributor to the luminal volume at follow-up. Conversely, both edges showed an increase in plaque volume without a net change in EEM volume.

Angioplasty, Balloon↗
PubMed1998

Guidance of intracoronary radiation therapy based on dose-volume histograms derived from quantitative intravascular ultrasound.

Application of ionizing radiation to prevent restenosis in atherosclerotic vessels treated by balloon angioplasty is a new treatment under investigation in interventional cardiology and radiology. There is variability in dose prescription, and both gamma- and beta-emitters are used, leading to a wide range of dose distribution over the arterial vessel wall. We present a new modality of dosimetry based on a method that three-dimensional (3-D) image reconstruction of electrocardiogram (ECG)-gated intravascular ultrasound (IVUS) images. Dose volume histograms (DVH) are used to describe the cumulative distribution of dose over two specific volumes: i) at the level of the luminal surface, defined with a thickness of 0.1 mm from the automatically detected contour of the highly echogenic blood-vessel interface, and ii) the adventitia volume is computed considering a 0.5-mm thickness from the echogenic media-adventitia interface. DVH provide a tool for reporting the actual delivered dose at the site believed to be the target: the adventitia, and to detect excessive radiation which could lead to vascular complications. Simulation of a gamma-emitter or of a radioactive source train in the center of the lumen are possible. The data obtained from the first ten patients included in the beta-irradiation trial (BERT 1.5) conducted in our institution are presented, supporting the use of DVH based on quantitative IVUS measurements for optimal dose prescription in vascular interventional radiation therapy.

Brachytherapy↗
PubMed1995

Coronary arteriography for quantitative analysis: experimental and clinical comparison of cinefilm and video recordings.

Although use of videotape for the recording of coronary angiograms continues to grow, the validity of quantitative coronary angiographic analysis of video images remains unknown. To estimate the reliability of angiographic images recorded on videotape, experimental and clinical angiograms were recorded simultaneously on both 35 mm cinefilm and super-VHS videotape with normal images and with spatial filtering of the images (edge enhancement) on a digital cardiac imaging system. The experimental angiographic studies were performed with plexiglass blocks and stenosis phantom of 0.5 to 3.0 mm in diameter. The clinical angiograms were recorded in 20 patients undergoing percutaneous transluminal coronary angioplasty (31 frames before and 20 frames after percutaneous transluminal coronary angioplasty). The cinefilm and corresponding videotapes were analyzed off-line with the new version of the coronary angiography analysis system. For the experimental study, measurements of minimal luminal diameter obtained from cinefilm, normal-image videotape, and edge-enhanced videotape were compared with the true phantom diameter. In the clinical study the agreement between measurements obtained from cinefilm and measurements from normal-image videotape and edge-enhanced videotape was examined. In the phantom series the accuracy and precision of quantitative coronary angiography measurement for cinefilm were -0.10 +/- 0.08 mm, for normal-image videotape -0.11 +/- 0.18 mm, and for edge-enhanced videotape -0.10 +/- 0.11 mm (mean +/- SD). In the clinical series, the differences between measurements from cinefilm and normal-image videotape were 0.14 +/- 0.20 mm and from cinefilm and edge-enhanced videotape 0.04 +/- 0.13 mm.(ABSTRACT TRUNCATED AT 250 WORDS)

Angioplasty, Balloon, Coronary↗
PubMed1994

Radiological quality of coronary guiding catheters: a quantitative analysis.

Quantitative coronary angiography (QCA) is a validated and widely accepted method to investigate changes in arterial dimension over time. Calibration of measurements is enabled by the use of the coronary catheter as a scaling device. The dimensions and laminar composition of coronary catheters, however, have changed significantly over recent years and the suitability of the current generation of coronary catheters for calibration purposes has not been validated. We therefore recorded 57 coronary guiding catheters on cinefilm, and compared their automated quantitative measurements (Cardiovascular Angiography Analysis System, CAAS) with their true values (precision micrometer). We found an overall underestimation of quantitatively derived dimensions, ranging from -8.9 to +4% for water-filled catheters and from -15.5 to -3.9% for contrast-filled catheters. In conclusion, while the current generation of coronary guiding catheters shows a wide variety in radiological quality, it can be clearly detected by the CAAS system, and is suitable for calibration of QCA measurements (with the exception of the DVI atherectomy catheter), provided that calibration is done on contrast-empty catheters.

Biocompatible Materials↗
PubMed1994

Quantification of intracoronary volume by videodensitometry: validation study using fluid filling of human coronary casts.

Changes in intracoronary volume reflect the hemodynamic significance of progression or regression of diffuse coronary artery disease where intracoronary catheters cannot be applied for direct measurements due to small vessel dimensions. We have validated the videodensitometric measurement of intracoronary volume with epoxy casts of postmortem human coronary arteries. The volume of 31 coronary segments (cross-sectional areas in a range of 2-13 mm2) measured by fluid-filling using a precision dispenser was compared with the respective single plane intracoronary volume assessments obtained by the videodensitometric algorithm of the new generation Cardiovascular Angiography Analysis System (CAAS II). The true and measured values of volume were compared by calculation of the mean of the signed differences +/- standard deviation and by linear regression analysis. Videodensitometric measurement of intracoronary volume correlate well with fluid-filling of human coronary artery casts (correlation coefficient: r = 0.99, y = 1.96 +/- 0.99x, standard error of estimate: SEE = 3.96) with a significant trend towards overestimation of true volume values (mean difference = 1.73 +/- 3.64 mm3, P < 0.05). Intracoronary volume estimations can be used to measure changes of luminal dimensions of coronary arteries and may offer a new approach to assessment of progression or regression of diffuse coronary artery disease.

Coronary Angiography↗
PubMed1994

Reduction of radiation exposure while maintaining high-quality fluoroscopic images during interventional cardiology using novel x-ray tube technology with extra beam filtering.

BACKGROUND: Radiographic technology plays an integral role in interventional cardiology. The number of interventions continues to increase, and the associated radiation exposure to patients and personnel is of major concern. This study was undertaken to determine whether a newly developed x-ray tube deploying grid-switched pulsed fluoroscopy and extra beam filtering can achieve a reduction in radiation exposure while maintaining fluoroscopic images of high quality. METHODS AND RESULTS: Three fluoroscopic techniques were compared: continuous fluoroscopy, pulsed fluoroscopy, and a newly developed high-output pulsed fluoroscopy with extra filtering. To ascertain differences in the quality of images and to determine differences in patient entrance and investigator radiation exposure, the radiated volume curve was measured to determine the required high voltage levels (kVpeak) for different object sizes for each fluoroscopic mode. The fluoroscopic data of 124 patient procedures were combined. The data were analyzed for radiographic projections, image intensifier field size, and x-ray tube kilovoltage levels (kVpeak). On the basis of this analysis, a reference procedure was constructed. The reference procedure was tested on a phantom or dummy patient by all three fluoroscopic modes. The phantom was so designed that the kilovoltage requirements for each projection were comparable to those needed for the average patient. Radiation exposure of the operator and patient was measured during each mode. The patient entrance dose was measured in air, and the operator dose was measured by 18 dosimeters on a dummy operator. Pulsed compared with continuous fluoroscopy could be performed with improved image quality at lower kilovoltages. The patient entrance dose was reduced by 21% and the operator dose by 54%. High-output pulsed fluoroscopy with extra beam filtering compared with continuous fluoroscopy improved the image quality, lowered the kilovoltage requirements, and reduced the patient entrance dose by 55% and the operator dose by 69%. CONCLUSIONS: High-output pulsed fluoroscopy with a grid-switched tube and extra filtering improves the image quality and significantly reduces both the operator dose and patient dose.

Cardiac Catheterization↗
PubMed1992

In-vivo validation of on-line and off-line geometric coronary measurements using insertion of stenosis phantoms in porcine coronary arteries.

Geometric coronary artery measurements with the Phillips Digital Cardiac Imaging System (DCI) and the Cardiovascular Angiography Analysis System (CAAS) were validated using percutaneous insertion of radiolucent stenosis phantoms in swine coronary arteries. Angiographic visualization of the stenosis lumens (phi 0.5, 0.7, 1.0, 1.4, 1.9 mm) was simultaneously recorded on DCI and cinefilm. The acquisition systems were calibrated by either the diameter of the guiding catheter (catheter CAL) or the isocenter method (isocenter CAL). Minimal luminal diameters (MLD) obtained with CAAS and DCI on 20 corresponding cineframes were compared with the true phantom diameters (PD). The accuracy of MLD measurements with the CAAS using isocenter CAL was -0.07mm, the precision 0.21 mm (r = 0.91; y = 0.30 + 0.79x; SEE = 0.19), with catheter CAL the accuracy was 0.09 mm, the precision 0.23 mm (r = 0.89; y = 0.19 + 0.74x; SEE = 0.19). The accuracy of MLD measurements using the DCI with isocenter CAL was 0.08 mm, the precision 0.15 min (r = 0.96; y = 0.08 + 0.86x; SEE = 0.14), with catheter CAL the accuracy was 0.18 mm, the precision 0.21 mm (r = 0.92; y = 0.09 + 0.76x; SEE = 0.17). DCI underestimated PD with isocenter CAL (p less than 0.05) and with catheter CAL (p less than 0.001). MLD can be measured with high accuracy, both applying on-line digital as well as off-line cineangiographic analysis. The results of digital measurements demonstrate high reliability of the new digital software package.

Animals↗
PubMed1992

Edge detection versus densitometry in the quantitative assessment of stenosis phantoms: an in vivo comparison in porcine coronary arteries.

The aim of this study was the in vivo validation and comparison of the geometric and densitometric technique of a computer-assisted automatic quantitative angiographic system (CAAS system). In six Landrace Yorkshire pigs (45 to 55 kg), precision-drilled phantoms with a circular lumen of 0.5, 0.7, 1.0, 1.4, and 1.9 mm were percutaneously introduced into the left anterior descending or left circumflex coronary artery. Twenty-eight coronary angiograms obtained with the phantom in a wedged intracoronary position could be quantitatively analyzed. Minimal lumen diameter, minimal cross-sectional area, percent diameter stenosis, and cross-sectional area stenosis were automatically measured with both the geometric and densitometric technique and were compared with the known phantom dimensions. When minimal lumen diameter was measured using the geometric approach, a nonsignificant underestimation of the phantom size was observed, with a mean difference of -0.06 +/- 0.14 mm. The larger mean difference observed with videodensitometry (-0.11 +/- 0.20 mm) was the result of the failure of the technique to differentiate the low lumen videodensities of two phantoms of smaller size (0.5 and 0.7 mm) from a dense background. Percent cross-sectional area stenosis measured with the two techniques showed a good correlation with the corresponding phantom measurements (mean difference between percent cross-sectional area stenosis calculated from the quantitative angiographic measurements and the corresponding phantom dimensions was equal to 2 +/- 6% for both techniques, correlation coefficient = 0.93 with both techniques, SEE = 5% with the geometric technique and 6% with the densitometric approach).(ABSTRACT TRUNCATED AT 250 WORDS)

Animals↗
PubMed1991

Do stents interfere with the densitometric assessment of a coronary artery lesion?

This in vitro study was designed to assess the contribution of three currently investigated coronary stents to the densitometric measurement of a known stenosis contained within two different sized plexiglass phantoms. These studies were performed at two concentrations of the contrast agent iopamidol (50 and 100%). The calculated minimal luminal cross-sectional area values in the control phantom ranged from 0-18% higher than the theoretical values. Insertion of a stainless steel stent (Wallstent, Schneider, Zürich or Palmaz-Schatz, Johnson and Johnson, Warren, NJ) resulted in further minor increases (less than or equal to 8% in the calculated minimal luminal cross-sectional area, except in the smaller phantom filled with 50% contrast medium. The Wiktor (tantalum) stent (Medtronic, Minneapolis, MN) had the largest impact of the three stents depending on the concentration of iopamidol (100% contrast medium: 9-13% values above control; 50% contrast medium; 23-56% higher). We conclude that although densitometry may overestimate the minimal luminal cross-sectional area in stented vessels, this effect is usually minor with stainless steel stents. However, tantalum-containing stents may result in serious overestimation of lesion area, particularly if contrast is diluted or the vessel is not well filled.

Coronary Angiography↗
PubMed1988

Assessment of immediate and long-term functional results of percutaneous transluminal coronary angioplasty.

Assessment of the functional significance of coronary artery lesions during cardiac catheterization has recently become possible by calculating coronary flow reserve from both myocardial contrast appearance time and density in the resting and hyperemic states determined from digitized coronary cineangiograms. However, the interobserver and intraobserver variabilities, as well as the short-, medium-, and long-term variabilities of the coronary flow reserve measurements, have to be established before this technique becomes an acceptable means of assessing the immediate and long-term functional results of revascularization procedures such as percutaneous transluminal coronary angioplasty (PTCA). Variability was defined as the mean difference and standard deviation of the difference between duplicate determinations of coronary flow reserve. The intraobserver variability (mean difference +/- SD) in the measurement of coronary flow reserve was -0.01 +/- 0.07. Interobserver variability by two observers was +0.08 +/- 0.52. Short-term variability based on the analysis of two coronary cineangiograms taken 5 minutes apart was -0.02 +/- 0.26. Medium-term variability (coronary cineangiographies repeated 1-3 hours apart) was found to be -0.06 +/- 0.52. Long-term variability (coronary cineangiographies repeated 3-5 months apart) was 0.11 +/- 0.63. Having established the reproducibility of this radiographic method, we studied the prospective changes in coronary flow reserve in 25 patients undergoing PTCA for single vessel coronary artery disease. Coronary flow reserve measurements and quantitative coronary cineangiography were performed before, immediately after, and 3-5 months after PTCA. PTCA resulted in an immediate increase in coronary flow reserve from 1 +/- 0.3 to 2.3 +/- 0.6 with a concomitant increase in obstruction area from 0.9 +/- 0.3 to 3.3 +/- 0.7 mm2. Nine of the 25 patients developed restenosis defined as a diameter stenosis greater than 50% at follow-up. The other 16 patients had a coronary flow reserve of 3.3 +/- 0.6, which was measured 3-5 months after PTCA. Coronary flow reserve measurement from digitized coronary cineangiograms is a reproducible method for the assessment of the physiological importance of coronary artery obstructions. Short-, medium-, and long-term investigations of the functional results of interventions such as pharmacological therapy or revascularization can be performed reliably with this technique.

Adult↗
PubMed1985

Assessment of dimensions and image quality of coronary contrast catheters from cineangiograms.

In the quantitative assessment of coronary arterial dimensions from coronary cineangiograms, the contrast catheter is usually used as a scaling device, requiring the definition of the catheter contours by semi- or fully automated contour detection procedures. The image quality of the x-ray radiated catheter is dependent on the catheter material, concentration of the contrast agent in the catheter, and kilovoltage of the x-ray source. The effects of these variables on the image quality and accuracy of the size-measurement of the filmed catheters were studied for four different catheter materials: woven dacron (wd), polyvinylchloride (pv), polyurethane (pu), and nylon. The following parameters were studied: measured size, image contrast, and average brightness gradient along the edges of the displayed catheters. The average differences of the angiographically measured size with the true size for the wd, pv, pu, and nylon catheters were +0.2, -3.2, -3.5, and +9.8%, respectively. The image contrast at various fillings of the catheters was roughly identical for the wd, pv, and pu catheters, and significantly lower for the nylon catheter. Image gradient was highest for the wd catheter, followed by the pv and pu catheters, and lowest for the nylon catheter. From these data it may be concluded that the woven dacron catheter is most suitable for quantitative coronary angiographic studies. The polyvinylchloride and polyurethane catheters perform about equally well but slightly less than the woven dacron catheter. The nylon catheter should not be used for such quantitative studies.

Cardiac Catheterization↗
PubMed1985

Assessment of short-, medium-, and long-term variations in arterial dimensions from computer-assisted quantitation of coronary cineangiograms.

A computer-assisted technique has been developed to assess absolute coronary arterial dimensions from 35 mm cineangiograms. The boundaries of optically magnified and video-digitized coronary segments and the intracardiac catheter are defined by automated edge-detection techniques. Contour positions are corrected for pincushion distortion. The accuracy and precision of the edge detection procedure as assessed from cinefilms of contrast-filled acrylate (Perspex) models were -30 and 90 micrometers, respectively. The variability of the analysis procedure itself in terms of absolute arterial dimensions was less than 0.12 mm, and in terms of percentage arterial narrowing for coronary obstructions less than 2.74%. Short-, medium-, and long-term variability measurements were assessed from repeated coronary angiographic examinations performed 5 min, 1 hr, and 90 days apart, respectively. For all studies the mean differences in absolute diameters were less than 0.13 mm. The variability in obstruction diameter ranged from 0.22 mm for the best-controlled study (medium-term) to 0.36 mm for the least-controlled study (long-term); variability in reference diameter ranged from 0.15 to 0.66 mm, respectively. It is concluded that the biological variations are a source of major concern and that further attempts toward standardization of the angiographic procedure are seriously needed.

Cineangiography↗