PubMed Health⌕ Search

Biomedical subjects

Adrian Neild

Publications and source records attributed to Adrian Neild.

6 recordsLinked to original sources

Simultaneous positioning of cells into two-dimensional arrays using ultrasound.

Contactless simultaneous positioning of micrometer-sized particles in suspension (e.g., copolymer beads, living cells, silicon microparts) can be performed using ultrasound. Current devices are capable of collecting particles into planes or lines by exciting a resonance in the fluid by means of a piezoelectric transducer located beneath the fluidic cavity and are designed such that a one-dimensional pressure field is created. The focus of this work is to collect cells in distinct point locations for potential drug screening array applications. A device to create two-dimensional arrays of cells within a micromachined chamber is described. The chamber is etched into a silicon wafer and sealed with glass; on the underside of the silicon layer a piezoelectric actuator is attached. A signal is applied to each of two orthogonally aligned strips electrodes defined on the surface of the piezoelectric plate. These two strip electrodes create independently addressable approximately one-dimensional pressure fields. It is shown that by applying the same signal to each electrode a diagonally aligned grid of cells can be produced. However, the independence of the two electrodes allows the application of two signals with slightly different frequencies to be applied which creates a grid of circular cell clumps highly suitable for the identified application. (c)

Animals↗

Finite element modeling of a microparticle manipulator.

The contactless movement of microparticles and cells to known locations within a fluid volume is of interest in the fields of microtechnology and life sciences. A device which can position such inhomogeneities suspended in a fluid at multiple locations is described and modeled. The device consists of a thin fluid layer contained in a channel etched into a silicon wafer. Waves are excited by a macro-piezoelectric plate with electrodes on the top and bottom surfaces and, as a result, waves propagate into the adjacent fluid. The result is a pressure field throughout the fluidic volume. When an inhomogeneity in a fluid is exposed to an ultrasonic field the acoustic radiation force results; this is found by integrating the pressure over the surface of the particle, retaining second order terms, and taking the time average. Thus, due to the presence of a pressure field in the fluid in which the particles are suspended, a force field is created. The particles are then collected at the locations of the force potential minima. In the device described here, the force field is used to position particles into lines. The locations of the particles are predicted by using a finite element model of the system. The experimental and modeling results, presented here, are in good agreement.

Computer Simulation↗

The application of time-frequency analysis to the air-coupled ultrasonic testing of concrete.

Air-coupled ultrasound has been used for the nondestructive evaluation of concrete, using broad bandwidth electrostatic transducers and chirp excitation. This paper investigates the benefits of using time-frequency analysis in such situations, for both waveform retrieval and imaging in the presence of low signal levels. The use of the short-term Fourier transform, the Wavelet transform, and the Wigner-Ville distribution all are considered, in which accurate tracking of the ultrasonic chirp signals is demonstrated. The Hough transform then is applied as a filter. An image of a steel reinforcement bar in concrete has been produced to illustrate this approach.

Journal Article↗

Positioning, displacement, and localization of cells using ultrasonic forces.

This paper presents a method and a device to position and displace cells. The cells are suspended in a fluid layer trapped between the device and an arbitrary surface such as an object slide or a wafer. The device vibrates at ultrasonic frequencies causing a pressure field in the fluid layer. This pressure field results in a force-field capable of positioning cells. Depending on the way in which the device is excited a 2-D or 3-D force-field can be generated, positioning the cells in lines or points respectively. Furthermore, it is possible to subsequently displace the cells with micrometer accuracy. This has been demonstrated using HL60 and MCF10A cells, and can be achieved without causing damage to the cells.

Biophysical Phenomena↗

Manipulation of cells using an ultrasonic pressure field.

A novel device is described that generates an ultrasonic force field in a fluid layer. The force field arises because of the acoustic radiation force, a second order effect, generated as an ultrasonic wave interacts with a suspended particle. This force field can be used to manipulate objects in the fluid layer trapped between this device and an arbitrary surface, in this case, a flat object slide. The device is shown to be capable of positioning and, in doing so, concentrating human cells to predictable locations. Mesenchymal and HeLa cells were used. Critically, the forces required to do this can be generated by ultrasonic pressure fields that do not affect the viability of the cells. The viability has been assessed using trypan blue dye. The device used consists of a 14 mm square glass plate that is excited by at least one of four piezotransducers attached to the edges. The resulting ultrasonic force field and, importantly, the location of the minima in the force potential at which the cells are collected, has been calculated analytically.

Cell Survival↗

Radiated fields of capacitive micromachined ultrasonic transducers in air.

This paper presents a study of the radiated ultrasonic fields of capacitive micromachined ultrasonic transducers (often referred to as cMUTs) in air. These fields were modeled theoretically and then compared to the experimental near-field amplitude variations and directivity patterns of square cMUTs. The good agreement between theory and experiment indicates that the devices can be approximated to plane piston radiators. The fields of multiple elements driven in phase on the same silicon substrate are presented, where again comparison is made to theory. The results indicate that individual elements are unaffected by radiation through the silicon substrate from adjacent devices. It will also be demonstrated that it is possible to use the knowledge of these fields to develop air-coupled ultrasonic surface imaging systems.

Journal Article↗