PubMed Health⌕ Search

Biomedical subjects

Adriano Zecchina

Publications and source records attributed to Adriano Zecchina.

At least 19 recordsLinked to original sources
PubMed2006

A thermally stable Pt/Y-based metal-organic framework: Exploring the accessibility of the metal centers with spectroscopic methods using H2O, CH3OH, and CH3CN as probes.

A metal-organic framework (MOF) based on Pt, Y, and 2,2'-bipyridine-5,5'-dicarboxylate (BPDC), stable up to 400 degrees C, has been synthesized and characterized. In this MOF, the Pt centers are coordinated to Cl and the N atoms of the BPDC unit, giving a local environment similar to that found in a series of Pt-organic complexes with catalytic activity toward C-H bond cleavage of alkanes. This new material is a heterogeneous counterpart to the corresponding metal-organic complex. The structure, determined by single-crystal XRD data, is the repetition of three covalently bonded layers. These layers form a block, which is stacking as an (a)(b)(c) sequence along the crystallographic b-axis. Each layer contains the Pt-organic unit, while Y atoms represent the connection between adjacent layers. No covalent connection is present between layer (a) of a block and layer (c) of an adjacent block. EXAFS (BM29 at the ESRF) analysis supports the XRD data. As this MOF crystallizes under hydrothermal conditions, water acts both as solvent and as a direct ligand of Y. Accessibility to the metal centers is demonstrated by reversible water desorption/readsorption, as determined by TPA/TPD, FTIR, UV-vis, EXAFS, and XANES. Importantly, the results show that the as-synthesized material will not suffer a permanent loss in porosity upon solvent removal. In addition to water, methanol, ethanol, and acetonitrile can also access the internal void of the dehydrated phase.

Journal Article↗
PubMed2006

Theoretical characterization of dihydrogen adducts with halide anions.

The interaction between a hydrogen molecule and the halide anions F(-), Cl(-), Br(-), and I(-) has been studied at different levels of theory and with different basis sets. The most stable configurations of the complexes have a linear geometry, while the t-shaped complexes are saddle points on the potential energy surface, opposite to what is observed for alkali cations. An electrostatic analysis conducted on the resulting adducts has highlighted the predominance of the electrostatic term in the complexation energy and, in particular, of the quadrupole- and dipole-polarizability dependent contributions. Another striking difference with respect to the positive ions, is the fact that although the binding energies have similar values (ranging between 25 and 3 kJ /mol for F(-) and I(-), respectively), the vibrational shift of the nu(H-H) and in general the perturbation of the hydrogen molecule in complexes are much greater in the complexes with anions (Delta nu(H-H) ranges between -720 and -65 cm(-1)). Another difference with respect to the interaction with cations is a larger charge transfer from the anion to the hydrogen molecule. The Delta nu is the result of the cooperative role of the electrostatics and of the charge transfer in the interaction. The correlation between binding energies and vibrational shift is far from linear, contrary to what is observed for cation complexes, in accordance with the higher polarizability and dynamic polarizability of the molecule along the molecular axis. The observed correlation may be valuable in the interpretation of spectra and thermodynamic properties of adsorbed H(2) in storage materials.

Journal Article↗
PubMed2006

Vibrational and thermodynamic properties of Ar, N2, O2, H2 and CO adsorbed and condensed into (H,Na)-Y zeolite cages as studied by variable temperature IR spectroscopy.

The adsorption of Ar, H2, O2, N2 and CO on (H,Na)-Y zeolite (Si/Al = 2.9, H+/Na+ approximately 5) has been studied at variable-temperature (90-20 K) and sub-atmospheric pressure (0-40 mbar) by FTIR spectroscopy. Unprecedented filling conditions of the zeolite cavities were attained, which allowed the investigation of very weakly adsorbed species and of condensed, liquid-like or solid-like, phases. Two pressure regimes were singled out, characterized by: (i) specific interaction at low pressure of the probe molecules (P) with the internal Brønsted and Lewis sites, and (ii) multilayer adsorption at higher pressure. In the case of CO the perturbation of the protonic sites located inside the sodalite cages was also observed. As the molecule is too large to penetrate the sodalite cage, the perturbation is thought to involve a proton jump tunneling mechanism. The adsorption energy for the (HF)OH...P (P = Ar, H2, O2, N2 and CO) specific interaction involving the high frequency Brønsted acid sites exposed in the supercages was derived following the VTIR (variable temperature infrared spectroscopy) method described by E. Garrone and C. Otero Areán (Chem. Soc. Rev., 2005, 34, 846).

Journal Article↗
PubMed2005

Behavior of extraframework Fe sites in MFI and MCM-22 zeolites upon interaction with N2O and NO.

We report on the characterization of an isomorphously substituted Fe-MCM-22 sample containing both Fe and Al in framework positions (Si/Fe = 44, Si/Al = 25). XANES spectroscopy was used to study the evolution of Fe sites as a consequence of thermal activation at high temperature (1073 K) and subsequent oxidation with N2O. The results were compared to those obtained in the same conditions on a well-known Fe-silicalite sample (Si/Fe = 68, Si/Al = infinity). In both samples, thermal activation causes migration of a fraction of Fe ions from framework to extraframework positions, this migration being accompanied by a reduction of Fe3+ to Fe2+. Upon oxidation with N2O at 523 K, the two samples show a different behavior. While in Fe-silicalite practically all of the Fe2+ sites formed by thermal activation are reoxidized to Fe3+, in Fe-MCM-22 only a fraction of the extraframework iron sites is involved in the reoxidation process. The accessibility of the extraframework Fe sites was also investigated by using the NO molecule as a surface probe. Upon NO dosage on the sample, the modification of the pre-edge peak and of the edge position suggests an important charge release from the extraframework Fe2+ ions to the adsorbed molecules. This could be formalized with the formation of Fe3+(NO-) complexes, compatible (on the basis of the simple molecular orbital theory) with a bent NO geometry. The formation of a complex family of Fe2+ mono-, di-, and trinitrosyl complexes was also confirmed by FTIR spectroscopy. Similarly to what was observed in the oxidation experiments, the fraction of extraframework Fe sites able to interact with NO in Fe-MCM-22 sample is smaller than that in Fe-silicalite treated in the same conditions. This trend is explained with a major clustering of extraframework Fe sites in Fe-MCM-22 sample, as was also suggested by FTIR experiments. These results suggest that the dispersion of iron in zeolitic matrixes prepared by isomorphous substitution could also depend on the zeolitic structure.

Journal Article↗
PubMed2005

Interaction of Hydrogen with MOF-5.

Hydrogen storage is among the most demanding challenges in the hydrogen-based energy cycle. One proposed strategy for hydrogen storage is based on physisorption on high surface area solids such as metal-organic frameworks (MOFs). Within this class of materials, MOF-5 has been the first structure studied for hydrogen storage. The IR spectroscopy of adsorbed H2 performed at 15 K and ab initio calculations show that the adsorptive properties of this material are mainly due to dispersive interactions with the internal wall structure and to weak electrostatic forces associated with O13Zn4 clusters. Calculated and measured binding enthalpies are between 2.26 and 3.5 kJ/mol, in agreement with the H2 rotational barriers reported in the literature. A minority of binding sites with higher adsorption enthalpy (7.4 kJ/mol) is also observed. These species are probably associated with OH groups on the external surfaces present as termini of the microcrystals.

Journal Article↗
PubMed2005

Hydrogen storage in Chabazite zeolite frameworks.

We have recently highlighted that H-SSZ-13, a highly siliceous zeolite (Si/Al = 11.6) with a chabazitic framework, is the most efficient zeolitic material for hydrogen storage [A. Zecchina, S. Bordiga, J. G. Vitillo, G. Ricchiardi, C. Lamberti, G. Spoto, M. Bjørgen and K. P. Lillerud, J. Am. Chem. Soc., 2005, 127, 6361]. The aim of this new study is thus to clarify both the role played by the acidic strength and by the density of the polarizing centers hosted in the same framework topology in the increase of the adsorptive capabilities of the chabazitic materials towards H2. To achieve this goal, the volumetric experiments of H2 uptake (performed at 77 K) and the transmission IR experiment of H2 adsorption at 15 K have been performed on H-SSZ-13, H-SAPO-34 (the isostructural silico-aluminophosphate material with the same Brønsted site density) and H-CHA (the standard chabazite zeolite: Si/Al = 2.1) materials. We have found that a H2 uptake improvement has been obtained by increasing the acidic strength of the Brønsted sites (moving from H-SAPO-34 to H-SSZ-13). Conversely, the important increase of the Brønsted sites density (moving from H-SSZ-13 to H-CHA) has played a negative role. This unexpected behavior has been explained as follows. The additional Brønsted sites are in mutual interaction via H-bonds inside the small cages of the chabazitic framework and for most of them the energetic cost needed to displace the adjacent OH ligand is higher than the adsorption enthalpy of the OH...H2 adduct. From our work it can be concluded that proton exchanged chabazitic frameworks represent, among zeolites, the most efficient materials for hydrogen storage. We have shown that a proper balance between available space (volume accessible to hydrogen), high contact surface, and specific interaction with strong and isolated polarizing centers are the necessary characteristics requested to design better materials for molecular H2 storage.

Alloys↗
PubMed2005

Liquid hydrogen in protonic chabazite.

Due to its fully reversible nature, H(2) storage by molecular adsorption could represent an advantage with respect to dissociative processes, where kinetic effects during the charging and discharging processes are present. A drawback of this strategy is represented by the extremely weak interactions that require low temperature and high pressure. High surface area materials hosting polarizing sites can represent a viable way toward more favorable working conditions. Of these, in this contribution, we have studied hydrogen adsorption in a series of zeolites using volumetric techniques and infrared spectroscopy at 15 K. We have found that in H-SSZ-13 zeolite the cooperative role played by high surface area, internal wall topology, and presence of high binding energy sites (protons) allows hydrogen to densify inside the nanopores at favorable temperature and pressure conditions.

Journal Article↗
PubMed2005

FTIR adsorption studies of H2O and CH3OH in the isostructural H-SSZ-13 and H-SAPO-34: formation of H-bonded adducts and protonated clusters.

The acidity of the isostructural H-SSZ-13 and H-SAPO-34 has been investigated by transmission FTIR spectroscopy using H2O and CH3OH as molecular probes. Interactions between the zeolitic samples and the probe molecules led to perturbations and proton transfers directly related to the acidity of the materials. The entire set of acidic sites in H-SSZ-13 interacts with H2O and CH3OH to give H-bonded adducts or protonated species. H3O+ is not formed in appreciable amounts upon H2O adsorption on H-SSZ-13, but at high coverages H2O generates clusters that have a proton affinity sufficiently high to abstract protons from the zeolite framework. Parallel experiments carried out for H-SAPO-34 showed that the H2O clusters abstract protons from Brønsted sites only to a minor extent. Moving to CH3OH, even if it has a higher proton affinity than H2O and should expectingly experience an easier protonation, proton transfer is totally absent in H-SAPO-34 under our set of conditions. The clear evidence of methanol protonation in H-SSZ-13 definitely states the strong acidic character of this material. When irreversibly adsorbed CH3OH is present in H-SSZ-13, an appreciable amount of (CH3)2O is formed upon heating to 573 K. Compared to its SAPO analogue, the present set of data indisputably points to H-SSZ-13 as the strongest Brønsted acidic material.

Journal Article↗
PubMed2005

Theoretical characterization of dihydrogen adducts with alkaline cations.

As part of an extended fundamental study on the interaction of molecular hydrogen with the surfaces of potential storage materials, this work describes the interaction of dihydrogen with bare alkaline cations (Li(+),Na(+),K(+),Rb(+)) by means of ab initio and density functional calculations. The effects of method and basis set are evaluated, and an estimate of the electrostatic contributions to the binding energy is evaluated. All methods predict a t-shaped coordination geometry, in accord with the quadrupolar nature of the molecule. The binding energies at the MP2/aug-cc-pVQZ (MP2-Møller-Plesset method truncated at second order) level ranges between 24 kJ/mol for Li(+) and 5 kJ/mol for Rb(+). Basis set size has minor effect on the binding energy of the complexes, although the poorer sets have severe limitations in the description of the electrostatics of the isolated molecule. The electrostatic contribution to the binding energy calculated from the electrostatic properties of the isolated molecule are in fact strongly basis set dependent. Their careful analysis shows that the predominant terms of the interaction are those due to the quadrupole and dipole-polarizability terms. The vibrational spectra of the adducts are evaluated and compared with a large set of experimental and theoretical results from the literature. This review highlights a linear correlation between the frequency shift and the binding energy, which is valuable in the understanding of adsorption phenomena by means of spectroscopic methods.

Journal Article↗
PubMed2004

Cu+(H2) and Na+(H2) adducts in exchanged ZSM-5 zeolites.

Cu(I) ions in Cu-ZSM-5 form Cu+(H2) complexes, stable at room temperature and sub-atmospheric H2 pressure, which do not have any homogeneous analogue except for matrix-isolated [Cu(eta2-H2)Cl]. Comparison with the unstable Na+(H2) adducts formed in the parent Na-ZSM-5 zeolite allow the conclusion that the Cu(I)/H2 bond is governed by sigma-pi overlap forces.

Journal Article↗
PubMed2003

Spectroscopic evidence for a persistent benzenium cation in zeolite H-beta.

Experimental evidence of protonation of an aromatic ring by a zeolite is hereby presented for the first time. The changes in vibrational properties and electronic transitions of the highest polymethylbenzene homologue, that is, hexamethylbenzene, were investigated after introducing the compound directly into a H-beta zeolite. Protonation of the aromatic ring, and thus the loss of symmetry, activated a vibrational ring mode at 1600 cm(-)(1). Furthermore, an electronic transition around 26 000 cm(-)(1), which was totally absent for the neutral species, was an obvious consequence of protonation. A parallel study of hexamethylbenzene adsorbed on a beta zeolite virtually free from protons did not show those distinctive spectral features. On the basis of the gas-phase proton affinity of hexamethylbenzene, a complete proton transfer from the zeolite framework to the molecule is, according to conventional considerations, not expected. The hexamethylbenzenium ion is stable in the zeolite cavities at least up to 200 degrees C. The remarkable persistence of this carbenium ion may be attributed to spatial constraints imposed by the tight fit of the cation inside the zeolite channels. Hexamethylbenzene is a relevant reaction intermediate in the methanol-to-hydrocarbons reaction and also plays a central role as a coke precursor in zeolite-catalyzed reactions that involve polymethylbenzenes.

Journal Article↗
PubMed2003

Anchoring Fe ions to amorphous and crystalline oxides: a means to tune the degree of Fe coordination.

We report on an IR spectroscopic study on the room-temperature adsorption of NO on different iron(II)-containing siliceous matrices. Fe2+ hosted inside the channels of MFI-type zeolites (Fe-ZSM-5 and Al-free Fe-silicalite) exhibits pronounced coordinative unsaturation, as witnessed by the capability to form, at 300 K, [Fe2-(NO)], [Fe2+(NO)2] and [Fe2+(NO)3] complexes with increasing NO equilibrium pressure. Fe2+ hosted on amorphous supports (high surface area SiO2 and MCM-41) sinks more deeply into the surface of the siliceous support and thus exhibits less pronounced coordinative unsaturation: only [Fe2+(NO)2] complexes were observed, even at the highest investigated NO equilibrium pressures. Activation at higher temperature (1073 K) of the Al-free Fe-silicalite sample resulted in the appearance of Fe2+ species similar to those observed on SiO2 and MCM-41, and this suggests that local (since not detectable by X-ray diffraction) amorphisation of the environment around Fe2+ anchoring sites occurs. The fact that this behaviour is not observed on the Fe-ZSM-5 sample activated at the same temperature suggests that framework Al species (and their negatively charged oxygen environment) have an important role in anchoring extraframework Fe2+ species. Such an anchoring phenomenon will prevent a random migration of iron species, with subsequent aggregation and loss of coordinative unsaturation. These observations can thus explain the higher catalytic activity of the Fe-ZSM-5 system in one-step benzene to phenol conversion when compared with the parent, Al-free, Fe-silicalite system with similar Fe content. The nature of the support and the activation temperature can therefore be used as effective means to tune the degree of Fe coordination.

Journal Article↗
PubMed2003

Enhancement of the ETS-10 titanosilicate activity in the shape-selective photocatalytic degradation of large aromatic molecules by controlled defect production.

In recent times, it has been shown that the microporous ETS-10 titanosilicate can be used as a shape-selective photocatalyst for the decomposition of aromatic molecules (Chem. Commun. 2001, 2131). Its actual use on practical grounds is however discouraged by its too low activity, when compared with that of TiO(2) photocatalysts. In the present work, we show how an ad hoc mild treatment with HF enhances the activity of ETS-10 toward the photodegradation of large aromatic molecules that are unable to penetrate inside the zeolitic pores, such as 2,5-dichlorophenol, 2,4,5-trichlorophenol, 1,3,5-trihydroxybenzene, and 2,3-dihydroxynaphthalene (DHN). The photoactivity of the acid-treated materials is comparable or even greater than that of the nonselective TiO(2) catalyst. Moreover, the enhancement of the photoactivity is accompanied by a remarkable parallel increase of the shape selectivity, particularly toward DHN (k(DHN)/k(P) = 127, where P = phenol). A complete characterization (by means of X-ray diffraction, scanning electron microscopy, transmission electron microscopy, ultraviolet-visible spectroscopy, and X-ray aborption spectroscopy techniques) of a set of ETS-10 samples which have undergone a progressively severe HF treatment allows us to propose an explanation of the photocatalytic activity and selectivity of the modified materials.

Journal Article↗