PubMed Health⌕ Search

Biomedical subjects

Aimin Yu

Publications and source records attributed to Aimin Yu.

13 recordsLinked to original sources
PubMed2006

Resonance light scattering technique for the determination of proteins with polymethacrylic acid (PMAA).

As a resonance light scattering (RLS) probe, the polyelectrolyte polymethacrylic acid (PMAA) was applied in this assay. The bovine serum albumin (BSA) and human serum albumin (HSA) were determined by the electrostatic interaction of PMAA and proteins. At pH 3.8 Na(2)HPO(4)-citric acid buffer solution, the RLS intensities of PMAA-BSA (HSA) system were greatly enhanced. The characteristic peaks were appeared at the wavelength 320, 546 and 594 nm. The optimization conditions of the reaction were also examined and selected. Under the selected conditions, the RLS intensities were proportional to the protein concentrations in the range of (0.0200-2.00) x 10(-6) mol/L for BSA and (0.0200-2.40) x 10(-6) mol/L for HSA. The influences of some foreign substances were also examined. The synthetic samples containing proteins and some real samples were analyzed and the results obtained were satisfactory.

Animals↗
PubMed2006

Rapid analysis of the essential oils from dried Illicium verum Hook. f. and Zingiber officinale Rosc. by improved solvent-free microwave extraction with three types of microwave-absorption medium.

A new method of extracting essential oils from dried plant materials has been studied. By adding a microwave-absorption medium (MAM) to a reactor, solvent-free microwave extraction (SFME) was improved and can be used to extract essential oils from dried plant material without pretreatment. With a microwave irradiation power of 85 W it took only approximately 30 min to extract the essential oils completely. The whole extraction process is simple, rapid, and economical. Three types of MAM, iron carbonyl powder (ICP), graphite powder (GP), and activated carbon powder (ACP), and two types of dried plant material, Illicium verum Hook. f. and Zingiber officinale Rosc., were studied. The results were compared with those obtained by use of conventional SFME, microwave-assisted hydrodistillation (MAHD), and conventional hydrodistillation (HD), and the conclusion drawn was that improved SFME was a feasible means of extracting essential oils from dried plant materials, because there were few differences between the composition of the essential oils extracted by improved SFME and by the other methods.

Adsorption↗
PubMed2006

Development of an analytical method for organotin compounds in fortified flour samples using microwave-assisted extraction and normal-phase HPLC with UV detection.

The normal high-performance liquid chromatography with UV detection was applied for the determination of tributyltin chloride (TBT), triphenyltin chloride (TPhT), tetraphenyltin (TrPhT), triethyltin chloride (TET) and tetraethyltin (TrET) from flour samples. The separation was performed in the isocratic mode on cyanopropyl column with a mobile phase of hexane-acetonitrile-THF (97/1/2). Under the experimental conditions used, quantitative limit of TBT, TPhT, TrPhT, TET and TrET are 0.95, 0.46, 0.97, 0.75 and 0.96 microg/ml, respectively. Microwave-assisted extraction of organotin (OT) compounds at 100 degrees C with an extraction time of 3 min was described. The extraction of organotin can be finished in acetic acid-hexane (20/80) medium. The quantitative extraction of five organotin compounds was achieved with recoveries ranging from 88 to 101% R.S.D. 3-8%.

Analytic Sample Preparation Methods↗
PubMed2006

Determination of serum albumin in the presence of poly(diallyldimethylammonium chloride) by resonance light scattering technique.

By means of the resonance light scattering (RLS) technique, a new method was developed to determine the bovine serum albumin (BSA) and human serum albumin (HSA) by the interaction of serum albumin with poly(diallyldimethylammonium chloride) (PDDA). At Tris-NaOH buffer solution, the RLS intensity of serum albumin at the wavelength 320, 550 and 590 nm was obviously enhanced in the presence of PDDA. The influences of some experimental factors, including incubation time, addition sequence of reagents, pH value, concentration of PDDA and foreign substances, on the enhancement of the RLS intensity were examined. The optimum conditions of the experiment were selected. Under the selected experimental condition, the enhanced RLS intensities were directly proportional to the concentrations in the range of (0.0250-2.75)x10(-6) mol/L for BSA and (0.0235-1.17)x10(-6) mol/L for HSA. The detection limits (S/N=3) were 8.40x10(-9) mol/L for BSA and 7.39x10(-9) mol/L for HSA. The synthetic samples were analysed and the results obtained were satisfactory.

Animals↗
PubMed2006

Chiral separation of cefadroxil by capillary electrochromatography.

In this paper, the chiral separation of cefadroxil was studied by capillary electrochromatography. Monolithic capillary column was prepared for the separation of cefadroxil enantiomers. The optimum buffer contained 28.5 mmol/L sodium acetate, 0.95% (v/v) acetic acid, 19 mmol/L beta-cyclodextrin (beta-CD) and 5% (v/v) isopropanol in formamide solution (pH 7.0), with the running voltage of 12 kV, the UV detector wavelength of 254 nm, the sample injected time of 8s and the temperature of 25 degrees C. Under these conditions, the column efficiency of cefadroxil enantiomers were N1=5324 and N2=23,768 with a selectivity factor (alpha) of 1.056 and resolution (Rs) of 0.978. The effect of buffer pH value, beta-CD concentration, organic modifier (isopropanol) concentration and voltage was also investigated for the separation by CEC.

Anti-Bacterial Agents↗
PubMed2006

Investigation on hyperin-cetyltrimethylammonium bromide-fibronectin system by resonance light-scattering technique.

A simple, highly sensitive assay for fibronectin (Fn) was reported using resonance light-scattering (RLS) technique based on the enhanced RLS intensity of hyperin-cetyltrimethylammonium bromide (CTMAB)-Fn system. The interaction system of hyperin-CTMAB-Fn was investigated using spectral methods. Mechanistic investigations show that the main reason of the enhanced RLS intensity of Fn is the formation of three-component complex (hyperin-CTMAB-Fn), in which CTMAB acts as a bridge between hyperin and Fn. The effects of pH, surfactant, concentration of CTMAB and hyperin, incubation time and foreign substances on the enhancement of RLS intensity were studied. Under the optimum conditions, the enhancement of RLS intensity is in proportion to the concentration of Fn in the range of 1.9-248ng/ml. The synthetic samples containing Fn were analyzed and results obtained were satisfied.

Cetrimonium↗
PubMed2006

Investigation on the interaction between colloidal gold and human complement factor 4 at different pH by spectral methods.

The interaction between colloidal gold and human complement factor 4 (human C4) at different pH was investigated by spectral methods, including absorption and resonance light-scattering spectrometry. According to the changes of color and absorption spectra of colloidal gold solution in presence of human C4, the interaction between colloidal gold and human C4 was quantitatively investigated using a semi-empirical "flocculation parameter". At the same time, the changes of resonance light-scattering spectra and transmission electron microscopy (TEM) images indicate that the aggregation of colloidal gold happens by electrostatic interaction in presence of human C4 in the pH range 5-6. However, the colloidal gold solution remains stable at pH >6 and pH <5 due to the repulsive electrostatic interaction between colloidal gold and human C4. The flocculation parameter is directly proportional to the concentration of human C4 in the range from 9.7 to 233.0 microgl(-1). In addition, the interactions between the colloidal gold and bovine serum albumin (BSA) as well as human serum albumin (HSA) were also investigated using the same methods. It was found that there was no aggregation of colloidal gold in presence of BSA and HSA in the pH range 5-6. However, when the pH of solution is 4, the aggregation of colloidal gold happens. Because BSA and HSA have different structure, the intensity of aggregation of colloidal gold in presence of BSA is greater than that in presence of HSA at pH 4.

Animals↗
PubMed2005

Determination of human complement factor C4 using resonance light-scattering technique with sodium dodecylbenzene sulphonate probe.

Based on the interaction between human complement factor C4 (human C4) and sodium dodecylbenzene sulphonate (SDBS) and the resonance light-scattering (RLS) technique, a highly sensitive assay for human C4 using resonance light-scattering technique was developed. At pH 2.8 Na2HPO4-citric acid buffer solution, the RLS intensities of SDBS system at 283, 503 and 600 nm were obviously enhanced in the presence of human C4. The effects of surfactant, pH, incubation time, concentration of SDBS and foreign substances on the enhanced RLS intensity of system were investigated. Under the optimum conditions, the enhanced RLS intensity is directly proportional to the concentration of human C4 in the range of (0.5-120)x10(-6)gl-1 and the linear regression equation was obtained with high correlation coefficient. This RLS technique was applied to the determination of human C4 in some synthetic samples with good recovery. Moreover, it was found that the electrostatic interaction is the main binding force between SDBS and human C4.

Benzenesulfonates↗
PubMed2005

Studies on the interaction of colloidal gold and serum albumins by spectral methods.

The interactions of colloidal gold and serum albumins, including bovine serum albumin (BSA) and human serum albumin (HSA), were studied by fluorescence and absorption spectrometry. Fluorescence quenching spectrometry was applied to study the interactions between colloidal gold and serum albumins. At pH 7.4 phosphate-buffered saline (PBS), the intensity of fluorescence emission spectrum of serum albumins decreased in the presence of colloidal gold, which indicated that colloidal gold quenched the fluorescence of serum albumins. Experimental results indicated that the combination reactions of colloidal gold and serum albumins were static quenching processes. Based on the effect of colloidal gold on fluorescence intensity, the binding constants, the numbers of binding sites and the acting forces between colloidal gold and serum albumins were found.

Animals↗
PubMed2003

MECC determination of oleanolic acid and ursolic acid isomers in Ligustrum lucidum Ait.

In this paper, a novel method to separate and determine oleanolic acid and ursolic acid isomers in Ligustrum lucidum Ait was studied by micellar electrokinetic capillary chromatography (MECC). The baseline separation of the two analytes were obtained on the condition that the buffer contained 15 mmol/l disodium hydrogen phosphate, 15 mmol/l disodium tetreborate, 10 mmol/l SDS and 5% (v/v) alcohol. The contents of the oleanolic acid and ursolic acid were determined in L. lucidum Ait, Folium photiniae and Flos campsis; they were 78.3 (R.S.D. = 2.75%) and 20.7 mg/g (R.S.D. = 2.97%), 27.9 (R.S.D. = 3.67%) and 79.8 mg/g (R.S.D. = 3.44%), 65.5 (R.S.D. = 3.73%) and 60.4 mg/g (R.S.D. = 4.06%) (n = 5), respectively. The recoveries of the analytes in the extract of L. lucidum Ait were 102%, (R.S.D. = 2.85%) for oleanolic acid and 104% (R.S.D. = 3.21%) for ursolic acid (n = 5). With the emphasis on the effects of SDS and alcohol concentrations on the separation of the isomers were investigated.

Algorithms↗
PubMed2003

Thin films of polyelectrolyte-encapsulated catalase microcrystals for biosensing.

Polyelectrolyte (PE)-encapsulated catalase microcrystals were assembled onto gold electrodes by their sequential deposition with oppositely charged PEs, utilizing electrostatic interactions to form enzyme thin films for biosensing. The PE coating around the microcrystals provided a regular surface charge, thus facilitating the stepwise film growth, and it effectively prevented catalase leakage from the assembled films. The encapsulated catalase was shown to retain both its biological and its electrochemical activity. Direct electron transfer between catalase molecules and the gold electrode was achieved without the aid of any electron mediator. In pH 5.0 phosphate buffer solution, the apparent formal potential (E(o)') of catalase was -0.131 V (vs Ag/AgCl). As a H2O2 biosensor, films consisting of one layer of the encapsulated catalase displayed considerably higher (approximately 5-fold) and more stable electrocatalytic responses to the reduction of H2O2 than did corresponding films made of one layer of nonencapsulated catalase or solubilized catalase. An increase in either the number of "precursor" PE layers between the gold electrodes and the catalase microcrystal layers in the film or the number of PE layers encapsulating the catalase microcrystals was found to decrease the electrocatalytic activity of the electrode. At low precursor PE layer numbers (approximately 2) and PE encapsulating layers (approximately 4), the current response was proportional to the H2O2 concentration in the range 3.0 x 10(-6) to 1.0 x 10(-2) M. The overall electroactivity of the multilayer film increased for the first two layers of encapsulated catalase, after which a plateau was observed. This was attributed to the increasing difficulty of electron transfer and substrate diffusion limitations. The current approach of using immobilized PE-encapsulated enzyme microcrystals for biosensing provides a versatile method to prepare high enzyme content films with high and tailored enzyme activities.

Biosensing Techniques↗