PubMed Health⌕ Search

Biomedical subjects

Akiyuki Tate

Publications and source records attributed to Akiyuki Tate.

4 recordsLinked to original sources
PubMed2005

Selective detection of a catecholamine against electroactive interferents using an interdigitated heteroarray electrode consisting of a metal oxide electrode and a metal band electrode.

We developed an interdigitated array electrode (IDAE) consisting of a metal oxide electrode and a metal band heteroelectrode and employed it for the selective detection of catecholamines. We used an indium-tin oxide (ITO) film as the oxidation electrode of the IDAE because the ITO was able to suppress response currents from L-ascorbic acid (AA) and uric acid (UA), which are major electroactive interferents in biological fluids. However, the ITO film also suppresses the reduction of quinones including oxidized catecholamines. We developed a simple technique for fabricating our hetero IDAE, which also preserves the electrochemical properties of the ITO. When we compared hetero ITO-gold, homo ITO-ITO, and carbon-carbon IDAEs, we found that the hetero IDAE provided both high sensitivity and selectivity for DA detection. We achieved high selectivities for DA against AA and UA. The ratios of the response currents of AA and UA to DA were calculated as 6 and 5%, respectively.

Catecholamines↗
PubMed2005

Discriminative detection of volatile sulfur compound mixtures with a plasma-polymerized film-based sensor array installed in a humidity-control system.

We demonstrated the discrimination of volatile sulfur compound mixtures with different mixing ratios by using an array of the plasma-polymerized film (PPF)-coated quartz crystal resonators. The PPF sensor array, which contains PPFs prepared from amino acids and synthetic polymers, exhibited different response patterns to mono or mixed volatile sulfur compounds (VSCs) (hydrogen sulfide and methanethiol) under a dry environment. The sensor array was installed in a desktop-size relative humidity controller. The relative humidity and temperature conditions of the sample flow to the sensor cell were equalized to those of the inner atmosphere of the sensor cell based on the concept of the two-separate-temperatures method. In this way, the baseline drift of PPF sensor response caused by the introduction of a highly humid sample was successfully suppressed. We compared the sensor array responses under the controlled humidity conditions. Presorption of water molecules by PPFs caused a decrease of sensor sensitivity, but the films still had the ability to discriminate sub-ppmv VSC mixtures having 6:1, 1:1, and 1:6 mixture ratios of hydrogen sulfide and methanethiol.

Journal Article↗
PubMed2005

High benzene selectivity of mesoporous silicate for BTX gas sensing microfluidic devices.

The gas selectivities of highly ordered mesoporous silicates and commercially-obtained porous silicates with respect to benzene, toluene and xylene were studied. After studying the porosities, pore uniformities, and surface silanol structures of the silicates and their relationships to gas selectivity in detail, we found that we could achieve high benzene selectivity by controlling the micropore size (less than 1 nm). Concluding that mesoporous silicate has a suitable micropore size and structure for benzene selectivity, we also observed that mesoporous silicate SBA-16 exhibited a high (>6) benzene selectivity from toluene and xylene even in a pseudo-atmospheric environment. A benzene detection limit of about 100 ppb was achieved by introducing SBA-16 into a microfluidic device originally developed for the separate detection of benzene, toluene, and xylene gases.

Air Pollutants, Occupational↗