Biomedical subjects

Alain Dereux

Publications and source records attributed to Alain Dereux.

6 recordsLinked to original sources

PubMed2005

Energy transfer in near-field optics.

When the probe tip of a near-field optical microscope illuminates nanoparticles with marked absorption bands, a large number of photons are absorbed before reaching the detector. These energy losses enhance the dark contrast usually observed in the vicinity of metallic nanoparticles. We demonstrate theoretically that this phenomenon can be exploited to image, in the optical frequency range, dissipative domains with a nanometer scale resolution. Simulations performed with noble-metal particles indicate that the detected signal significantly drops down when the excitation frequency is approaching the plasmon resonance of the particles.

Journal Article↗

PubMed2005

DNA nanofilm thickness measurement on microarray in air and in liquid using an atomic force microscope.

The measurement of the thickness of DNA films on microarray as a function of the medium (liquid, air) is gaining importance for understanding the signal response of biosensors. Thiol group has been used to attach DNA strands to gold micropads deposited on silicon surface. Atomic force microscopy (AFM) was employed in its height mode to measure the change in the pad thickness and in its force mode to measure the indentation depth of the nanofilm. A good coherence between the height and force modes is observed for the film thickness in air. The adhesion force was found to be an alternative way to measure the surface coverage of the biolayer at nanoscopic scale. However the force analysis (compression, steric and electrostatic) provides baseline information necessary to interpret the AFM height image in liquid. Analysis of the film thickness distribution shows that the height of the DNA strands depends on both the DNA strand length (15-35 base pairs) and the environment (air, liquid). In air, longer strands lay down onto gold surface whereas the charge reversal of gold in liquid causes a repulsion of longer strands, which stand up.

Adsorption↗

PubMed2005

Mapping the 3D-surface strain field of patterned tensile stainless steels using atomic force microscopy.

The quantification of microstructural strains at the surface of materials is of major importance for understanding the reactivity of solids. The present paper aims at demonstrating the potentialities of the atomic force microscopy (AFM) for mapping the three-dimensional surface strain field on patterned tensile specimens. Electron beam (e-beam) lithography has been used to deposit 16 x 16 arrays of gold-squared pads. Monitoring the evolution of such a pattern under applied strain allows to quantify the triaxial strains both at the micro-(plastic) domain and nanoscale (elastic) domain vs. applied strain. The proposed method was applied to stainless steels after 4.5% plastic strain.

Journal Article↗

PubMed2004

Surface plasmon near-field imaging of very thin microstructured polymer layers.

We report on the near-field imaging of microstructured polymer layers deposited on an homogeneous metal thin film on which a surface plasmon mode is excited. The microstructures in the polymer layers are designed by electron beam lithography, and the near-field imaging is performed with a photon scanning tunneling microscope (PSTM). We show that, despite their very small height, the microstructures can be conveniently imaged with a PSTM thanks to the field enhancement at the surface of the metal thin film supporting the surface plasmon. The influence of the illumination conditions on the contrast of the PSTM images is discussed. In particular, we show that both the field enhancement and the near-field intensity distribution around the microstructures depend dramatically upon the illumination conditions, leading to the conclusion that the PSTM is well suited for spatially resolved near-field surface plasmon sensing purposes.

Journal Article↗

PubMed2003

Surface plasmon subwavelength optics.

Surface plasmons are waves that propagate along the surface of a conductor. By altering the structure of a metal's surface, the properties of surface plasmons--in particular their interaction with light--can be tailored, which offers the potential for developing new types of photonic device. This could lead to miniaturized photonic circuits with length scales that are much smaller than those currently achieved. Surface plasmons are being explored for their potential in subwavelength optics, data storage, light generation, microscopy and bio-photonics.

Journal Article↗

PubMedDate not supplied

Performance of interdigitated nanoelectrodes for electrochemical DNA biosensor.

An electrochemical methodology for bio-molecule sensing using an array of well-defined nanostructures is presented. We describe the fabrication by e-beam lithography of nanoelectrodes consisting of a 100 micro m x 50 micro m area containing interdigitated electrodes of 100 nm in width and interelectrode distance of 200 nm. Sensitivity and response time of the nanoelectrodes are compared to the responses of macro- and microelectrodes. The specificity of the sensor is studied by modifying the gold electrodes with DNA. The technique enables to characterize both single and double-stranded DNA of 15 nucleotides. A special electrochemical cell is adapted to control the temperature and measure the DNA concentration by UV analysis. The electrochemical method requires no label on the DNA, only redox mediators were used.

Adsorption↗