PubMed Health⌕ Search

Biomedical subjects

Alain M Jonas

Publications and source records attributed to Alain M Jonas.

17 recordsLinked to original sources
PubMed2007

Formation of vesicles in block copolymer-fluorinated surfactant complexes.

Spherical micellar aggregates have been obtained in chloroform by mixing poly(styrene)-block-poly(4-vinylpyridine) (PS-b-P4VP) diblock copolymers with perfluorinated surfactants (FS) bearing a carboxylic acid head. These micellar aggregates are resulting from the self-assembly of the insoluble P4VP/fluorinated complexes into a core surrounded by the soluble PS coronal chains. Their characteristic features have been studied as a function of various parameters including the composition of the PS-b-P4VP copolymer, the tail length of the fluorinated surfactant, the 4VP/FS molar ratio, the number of carboxylic acid group (1 or 2) on the surfactant, the presence of the PS block and of the fluorine atoms on the surfactant. Dilution of these initial micellar aggregates triggers a morphological reorganization resulting in the formation of more stable vesicles. The extent of this morphological transition is related to the solubility of the P4VP/fluorinated complexes during the dilution process. This transition is complete for short P4VP/FS complexes, incomplete for long P4VP/FS complexes, and not observed whenever an alpha,omega-difunctional FS is used in P4VP/FS complexes, leading to a cross-linked core. Finally, the spheres-to-vesicles transition has been advantageously used in order to encapsulate molecules, as demonstrated by confocal fluorescence microscopy.

Journal Article↗
PubMed2006

Glucose-responsive polyelectrolyte capsules.

Phenylboronic acids are known to form covalent complexes with polyol compounds such as glucose. A novel polyelectrolyte, containing phenylboronic acid as a glucose-sensitive moiety, has been synthesized and used for the fabrication of glucose-sensitive hollow polyelectrolyte capsules using the layer-by-layer technique. The response to glucose was observed as a rather fast dissolution of the capsules when brought into contact with a glucose-containing medium. These polyelectrolyte capsules are the first polyelectrolyte capsules able to respond to a stimulus that can be provided by the human body (i.e., an increase in glucose concentration). Therefore, the concept we present has promising applications in the biomedical field for the controlled delivery of insulin.

Boronic Acids↗
PubMed2006

Solvent-induced morphological transition in core-cross-linked block copolymer micelles.

Microwave-assisted polymerization has been utilized to synthesize amphiphilic poly(2-ethyl-2-oxazoline-block-2-"soy alkyl"-2-oxazoline) diblock copolymers (PEtOx-PSoyOx). The amphiphilic block copolymers have been used to prepare aqueous spherical micelles consisting of a PEtOx corona and a PSoyOx core, which have been further cross-linked by UV irradiation. The morphology of these cross-linked micelles has been shown to reversibly change from spheres to short rods referred to as rice grains whenever the micelles were transferred from water into acetone, a nonselective solvent for the constituent blocks. This morphological transition has been attributed to the swelling of the slightly cross-linked PSoyOx core.

Journal Article↗
PubMed2006

One step growth of protein antifouling surfaces: monolayers of poly(ethylene oxide) (PEO) derivatives on oxidized and hydrogen-passivated silicon surfaces.

We compare two routes for creating protein adsorption-resistant self-assembled monolayers (SAMs) by chemical modification of silicon surfaces with poly(ethylene oxide) (PEO) oligomeric derivatives. The first route involves the assembly of 2-methyl[(polyethyleneoxy)propyl]trichlorosilane (Cl3SiMPEO) films onto oxidized silicon surfaces (OH-SiO(x)) either by a liquid-phase process at room temperature or by a gas-phase process at 423 K, producing Si-O-Si bonds between the substrate and the organic layer. The second pathway makes use of the assembly of poly(ethylene glycol methyl ether) (MPEG) films onto hydrogen-passivated silicon surfaces (H-Si) using a liquid-phase process at 353 or 423 K, leading to the formation of Si-O-C bonds between the substrate and the organic layer. Structural investigation by X-ray reflectometry (XRR) reveals that the thickness and surface densities of the grafted PEO monolayers strongly depend on experimental conditions such as temperature and grafting time. Atomic force microscopy (AFM) shows that very smooth and homogeneous monolayers can be obtained with average roughnesses close to those measured on the corresponding bare substrates. Finally, the antifouling properties of the modified silicon surfaces were evaluated by X-ray photoelectron spectroscopy (XPS), using a membrane protein (P.69 antigen) as model protein. Both types of PEO monolayers exhibit excellent protein repellency, as soon as the grafting density is equal to or higher than 1.7 chains/nm2.

Hydrogen↗
PubMed2006

Surface treatment and characterization: perspectives to electrophoresis and lab-on-chips.

The control and modification of surface state is a major challenge in bioanalytical sciences, and in particular in electrokinetic separation methods, due to the importance of electroosmosis. This topic has gained recently a renewed interest, associated with the development of "lab-on-chips" systems that extend the range of materials in which separation channels are fabricated. The surface science community has developed through the years a large toolbox of characterization tools and surface modification protocols, which is not yet fully exploited in the bioanalytical world. In this paper, we try and present an overview of these tools, in order to stimulate new ideas for improved and more controlled surface treatment strategies for separations in capillaries and microchannels. We briefly describe some physical and chemical aspects of electroosmosis (global and spatially resolved), streaming current, and streaming potential. We also review the main strategies for surface coating, and compare the advantages of physisorption, well-organized thin self-assembled monolayers, or conversely thick polymer "brushes". Examples of existing applications to electrophoresis in microchannel are also given.

Adsorption↗
PubMed2006

Self-exploding lipid-coated microgels.

Self-exploding microparticles show potential for advanced delivery of certain therapeutics. This study evaluates (1) whether degrading biodegradable dextran hydroxyethyl methacrylate (dex-HEMA) microgels can be coated by a lipid membrane and (2) whether the surrounding membrane can be ruptured by the increasing swelling pressure of the degrading microgel. We found that adsorption of charged liposomes to oppositely charged dex-HEMA microgels provides efficient coating of the microgels, whereby microparticles with a "core-shell" structure were clearly obtained. Especially, we could confirm experimentally that the swelling pressure increase of degrading dex-HEMA microgels can destroy the lipid membrane surrounding the microgels.

Adsorption↗
PubMed2005

Partial dewetting of polyethylene thin films on rough silicon dioxide surfaces.

The effect of roughness on the dewetting behavior of polyethylene thin films on silicon dioxide substrates is presented. Smooth and rough silicon dioxide substrates of 0.3 and 3.2-3.9 nm root-mean-square roughness were prepared by thermal oxidation of silicon wafers and plasma-enhanced chemical vapor deposition on silicon wafers, respectively. Polymer thin films of approximately 80 nm thickness were deposited by spin-coating on these substrates. Subsequent dewetting and crystallization of the polyethylene were observed by hot-stage optical microscopy in reflection mode. During heating, the polymer films melt and dewet on both substrates. Further observations after cooling indicate that, whereas complete dewetting occurs on the smooth substrate surface, partial dewetting occurs for the polymer film on the rough surface. The average thickness of the residual film on the rough surface was determined by ellipsometry to be a few nanometers, and the spatial distribution of the polymer in the cavities of the rough surface could be obtained by X-ray reflectometry. The residual film originates from the impregnation of the porous surface by the polymer fluid, leading to the observed partial dewetting behavior. This new type of partial dewetting should have important practical consequences, as most real surfaces exhibit significant roughness.

Crystallization↗
PubMed2005

Kinetics of exchange of alkanethiol monolayers self-assembled on polycrystalline gold.

We report on the exchange between a hydrophilic thiol (11-mercapto-1-undecanol) in a liquid or gas phase and a hydrophobic thiol (dodecanethiol) of similar length self-assembled on a polycrystalline gold surface for a wide range of temperatures and times. The molecular composition of the mixed monolayers is determined by the static water contact angle and X-ray photoelectron spectroscopy measurements. Atomic force microscopy in lateral force mode is used to characterize the molecular domains at the nanometer level. The exchange first occurs rapidly at the gold grain boundaries, with an activation energy of about 66 +/- 4 kJ/mol. Then, boundaries of ordered thiol domains are progressively replaced, and the exchange is slowed because only regions of increasing perfection are left untouched. Higher temperatures lead to faster kinetics of replacement and the removal of larger amounts of the original thiol. No significant difference could be detected between exchange occurring in an ethanol solution or in the gas phase, and the initial rate of exchange was found to be similar for the displacement of dodecanethiol by 11-mercapto-1-undecanol molecules and for the converse displacement.

Journal Article↗
PubMed2005

Dilution-induced spheres-to-vesicles morphological transition in micelles from block copolymer/surfactant complexes.

Metastable spherical micelles have been obtained by mixing in chloroform poly(styrene)-block-poly(4-vinylpyridine) diblock copolymers with perfluorinated surfactants bearing a carboxylic acid head. Dilution of these initial micelles triggers a morphological reorganization resulting in the formation of more stable vesicles. This transition can be advantageously used to encapsulate molecules of interest.

Chloroform↗
PubMed2005

Tuning the orientation of an antigen by adsorption onto nanostriped templates.

We investigate the adsorption of a globular protein (P.69 pertactin, also known as antigen 69k) on protein-repellent hydrophilic substrates bearing regularly spaced hydrophobic nanostripes, for stripe widths comprised between 20 and 160 nm. Protein adsorption is shown to be remarkably well-controlled by the templating substrates, with a near-to-perfect reproduction of stripes by the protein monolayer down to 20 nm width, except for a 5-10 nm broadening. However, whereas the ellipsoidal protein forms a dense monolayer with random orientation of its long axis for large stripe widths, it adsorbs in a predominantly side-on (flat-on) orientation for stripe widths below 50 nm, due to the easier reorientation (interfacial relaxation) of the proteins adsorbed at the edges of the stripes, which experience a decreased lateral interaction. These results show that protein confinement in regions of a size similar to their dimensions can be used to tune their orientation, which may be of interest for applications in high-density sensor devices.

Adsorption↗
PubMed2005

Alignment and assembly of adsorbed collagen molecules induced by anisotropic chemical nanopatterns.

Collagen, a protein widely used to control cell-material interactions, is known to self-assemble in solution. Supramolecular structures also form on material surfaces following collagen adsorption. Herein, we report the use of anisotropic, flat, surface chemical nanopatterns, which consist of alkyl-terminated tracks drawn in an oligo(ethylene glycol)-terminated matrix, to direct collagen adsorption. As revealed by atomic force microscopy, the spontaneous collagen adsorption performed on such patterned substrates results in the accumulation of collagen on the hydrophobic tracks. Moreover, the width of the tracks (30-90 nm), which is much smaller than the length of the collagen molecule (approximately 300 nm), is the origin of preferential alignment of the molecules and of their assembly into continuous bundles of adsorbed collagen. This chemical guidance effect due to self-confinement of proteins upon adsorption may bring novel and valuable applications, specifically in biomaterials science and cell growth control.

Adsorption↗
PubMed2005

Nanoscale control of polymer crystallization by nanoimprint lithography.

Polymer crystallization is notoriously difficult to control. Here, we demonstrate that the orientation of polymer crystals can be fully controlled at the nanoscale by using nanoimprint lithography (NIL) with molds bearing nanotrenches to shape thin films of poly(vinylidene fluoride). This unprecedented control is due to the thermomechanical history experienced by the polymer during embossing, to the shift of the nucleation mechanism from heterogeneous to homogeneous in confined regions of the mold, and to the constraining of the fast growth axis along the direction of the trenches. NIL thus appears as an ideal tool to realize smart polymer surfaces where crystal ordering can be tuned locally.

Journal Article↗
PubMed2004

Control of the water permeability of polyelectrolyte multilayers by deposition of charged paraffin particles.

We present a new way to protect polyelectrolyte multilayers from water, consisting in the adsorption and subsequent fusing of charged wax particles atop a multilayer. The formation of the wax layer is demonstrated by different techniques such as ellipsometry, contact angle measurements, and atomic force microscopy. The diffusion of water in protected and unprotected multilayers is studied by in situ neutron reflectometry. Whereas a top layer of wax crystals already allows substantial reduction of the diffusion, the fusion of this top layer leads to the dominating exclusion of water from the multilayers when dipped in water. This method opens up new interesting avenues for polyelectrolyte multilayers in practical applications where permeability of water, ions, or hydrophilic drugs is an issue.

Journal Article↗
PubMed2003

Encoding crystal microstructure and chain folding in the chemical structure of synthetic polymers.

The development of robust methodologies to control the solid-state structure of polymeric materials by appropriate design of the macromolecular architecture has a crucial impact on the mechanical properties of these materials. Here, we demonstrate the feasibility of controlling chain folding of polymers by steric interactions only, in contrast to previous attempts aimed at engineering polymer crystallization through hydrogen bonding. In a linear synthetic macromolecule similar to polyethylene, we encoded structural instructions that are translated during a crystallization process to generate a unique, semi-crystalline morphology with structure-controlled crystal thickness of approximately 5 nm that remains constant over a wide temperature range. The molecular code consists of a linear backbone alternating crystallizable, long alkyl sequences of monodisperse sizes separated by short spacers containing side-chains and acting as stops and fold-controlling units. This simple strategy could be used to produce advanced polymeric materials with fine control of the crystalline and amorphous regions.

Crystallization↗
PubMed2003

Ordered polyelectrolyte multilayers. Rules governing layering in organic binary multilayers.

We study the growth and internal structure of polyelectrolyte multilayers obtained by combining three polyanions with nine polycations of the ionene family, of systematically varied chemical architecture. We find that, contrary to a generally held belief, ordered organic multilayers are by no way exceptional, provided one of the polyelectrolytes bears groups which induce structure in water, such as long hydrophobic segments or mesogenic groups. However, this condition is not sufficient, as order will or will not emerge in the multilayer depending on the specific pairing of the polyelectrolytes. The results support the notion that layering in the multilayer results from some degree of prestructuring of a water-swollen layer adsorbed during each step of deposition. These findings pave the way to new possible uses of polyelectrolyte multilayers, for example, for applications requiring preferential alignment or strong confinement of specific functional groups.

Journal Article↗