Biomedical subjects

Alan E Tonelli

Publications and source records attributed to Alan E Tonelli.

7 recordsLinked to original sources

PubMed2005

Structure and stability of columnar cyclomaltooctaose (gamma-cyclodextrin) hydrate.

Rapid recrystallization of cyclomaltooctaose (gamma-cyclodextrin, gamma-CD) from aqueous solution resulted in formation of a columnar structure with only water as the guest molecule. Upon vacuum drying at 90 degrees C for 15 h, gamma-CD, which was initially in the columnar structure, became amorphous. Complementary water vapor sorption and wide-angle X-ray diffractometry experiments were performed on columnar gamma-CD in its vacuum dried and as-precipitated states to elucidate its stability in humid environments and the crystal structure present at varying sorption levels. These experiments show that both types of gamma-CD transform to the cage crystal structure upon exposure to water vapor at 40 degrees C and with an activity of 1.0. Sorption equilibrium is reached long before the crystal structure transformation is complete, indicating that a significant amount of molecular mobility exists in the various hydrated gamma-CD crystal structures.

Crystallization↗

PubMed2004

Structure and stability of columnar cyclomaltohexaose (alpha-cyclodextrin) hydrate.

Rapid recrystallization of cyclomaltohexaose (alpha-cyclodextrin, alpha-CD) from aqueous solution resulted in formation of the columnar crystal structure of alpha-CD containing only water as the guest molecule. Complementary water vapor sorption and wide-angle X-ray diffractometry (WAXD) experiments were performed on the alpha-CD columnar structure to elucidate the crystal structure present at varying sorption levels. Equilibrium isothermal water vapor sorption experiments at 40 degrees C revealed that the alpha-CD columnar structure is unstable above a water activity of approximately 0.67. This was confirmed by WAXD diffractograms collected over time, which further revealed that alpha-CD columnar structure undergoes a phase transformation to the cage structure after approximately 0.25 h at 40 degrees C and a water activity of 1.0.

Carbohydrate Conformation↗

PubMed2004

Two-phase channel structures based on alpha-cyclodextrin-polyethylene glycol inclusion complexes.

Wide-angle X-ray scattering observations of alpha-cyclodextrin (CD)-poly(ethylene glycol) (PEG) inclusion complexes (ICs) have shown for the first time that two crystalline columnar modifications (forms I and II) are produced in the process of their formation. This was made possible by precise azimuthal X-ray diffraction scanning of oriented IC samples. Form I is characterized by CDs threaded onto PEG chains and arranged along channels in the order head-to-head/tail-to-tail, while form II is formed by unbound CDs also arranged into columns in a head-to-tail and also possibly a head-to-head/tail-to-tail manner, probably as a result of template crystallization on the form I IC crystals. It was shown that similar structural peculiarities are inherent for channel structures based on ICs obtained with PEG with a wide range of molecular weights (MWs). The characteristic feature of ICs based on PEG, especially with MW > 8000, is the presence of unbound polymer in the composition of the complex. The amount of unbound PEG was shown to rise with increasing MW of PEG, resulting in greater imperfections in the IC crystalline structure. The polyblock structure of ICs based on alpha-CD and PEG was therefore proposed.

Microscopy, Electron, Scanning↗

PubMedDate not supplied

Formation of and coalescence from the inclusion complex of a biodegradable block copolymer and alpha-cyclodextrin. 2: A novel way to regulate the biodegradation behavior of biodegradable block copolymers.

A biodegradable block copolymer (PCL-b-PLLA, M(n) = 1.72 x 10(4), M(w)/M(n) = 1.37) of poly(epsilon-caprolactone) (PCL) and poly(L-lactide) (PLLA) with very low crystallinity was obtained by forming the inclusion complex between alpha-cyclodextrin molecules and PCL-b-PLLA followed by coalescence of the guest polymer chains. Films of the as-synthesized and coalesced copolymer samples, PCL and PLLA homopolymers of approximately the same chain lengths as the corresponding blocks of PCL-b-PLLA, and a physical blend of PCL/PLLA homopolymers with the same molar composition as PCL-b-PLLA were prepared by melt-compression molding between Teflon plates. Subsequently, the in vitro biodegradation behavior of these films was studied in phosphate buffer solution containing lipase from Rhizopus arrhizus, by means of ultraviolet spectra, attenuated total reflectance FTIR spectra, differential scanning calorimetry, wide-angle X-ray diffraction measurements, and weight loss analysis. PCL segments were found to degrade much faster than PLLA segments, both in the pure state and in copolymer or blend samples. Consistent with our expectation, suppression of the phase separation, as well as a decrease of crystallinity, in the coalesced copolymer sample led to a much faster enzymatic degradation than that of either as-synthesized copolymer or the PCL/PLLA physical blend sample, especially during the early stages of biodegradation. Thus the biodegradation behavior of biodegradable block copolymers, which is of decisive importance in drug delivery and controlled release systems, may be regulated by the novel and convenient means recently reported by us.(1)

Biocompatible Materials↗

PubMedDate not supplied

Melting and crystallization behaviors of biodegradable polymers enzymatically coalesced from their cyclodextrin inclusion complexes.

Inclusion complexed (IC) and coalesced biodegradable poly(epsilon-caprolactone) (PCL), poly(L-lactic acid) (PLLA), and their diblock copolymer (PCL-b-PLLA) were achieved by forming ICs between host alpha-cyclodextrin(alpha-CD) and guest PCL, PLLA, and PCL-b-PLLA, followed by removing the alpha-CD host with an amylase enzyme. FTIR spectra of the coalesced polymers reveal that the host alpha-CD can be completely removed, without polymer degradation, by treatment with an amylase enzyme. The melting and crystallization behavior of these CD-IC treated polymers, which are crystallizable, biodegradable, and bioabsorbable, are investigated by differential scanning calorimetry (DSC) and polarized optical microscopy. Results show that coalescence increased the crystallinities of the homopolymers but decreased that of the diblock copolymer. The Avrami exponent (n), derived from both isothermal and nonisothermal crystallization models for homo-PCL and -PLLA and the PCL and PLLA blocks in the diblock copolymer samples coalesced from their ICs, is close to 4, indicating homogeneous crystallization, whereas crystallization of the blocks in the as-synthesized diblock copolymer yields an Avrami exponent around 3, indicating heterogeneous crystallization. All of these results demonstrate that the PCL and PLLA homopolymers and blocks in the IC-coalesced samples are more readily and homogeneously crystallized than those in the as-synthesized samples or their physical blend, even though the level of crystallinity in the IC-coalesced diblock copolymer is significantly lower. Moreover, unlike the as-synthesized diblock copolymer, the crystallization of PCL and PLLA blocks in the IC-coalesced diblock copolymer are not influenced by their covalent connection.

Biodegradation, Environmental↗

PubMedDate not supplied

Structural studies of Bombyx mori silk fibroin during regeneration from solutions and wet fiber spinning.

Regenerated silk fibroin materials show properties dependent on the methods used to process them. The molecular structures of B. mori silk fibroin both in solution and in solid states were studied and compared using X-ray diffraction, FTIR, and (13)C NMR spectroscopy. Some portion of fibroin protein molecules dissolved in formic acid already have a beta-sheet structure, whereas those dissolved in TFA have some helical conformation. Moreover, fibroin molecules were spontaneously assembled into an ordered structure as the acidic solvents were removed from the fibroin-acidic solvent systems. This may be responsible for the improved physical properties of regenerated fibroin materials from acidic solvents. Regenerated fibroin materials have shown poor mechanical properties and brittleness compared to their original form. These problems were technically solved by improving the fiber forming process according to a method reported here. The regenerated fibroin fibers showed much better mechanical properties compared to the native silk fiber and their physical and chemical properties were characterized by X-ray diffraction, solid state (13)C NMR spectroscopy, SinTech tensile testing, and SEM.

Animals↗

PubMedDate not supplied

Structural study of irregular amino acid sequences in the heavy chain of Bombyx mori silk fibroin.

Recently, genetic studies have revealed the entire amino acid sequence of Bombyx mori silk fibroin. It is known from X-ray diffraction studies that the beta-sheet crystalline structure (silk II) of fibroin is composed of hexaamino acid sequences of GAGAGS. However, in the heavy chain of B. mori silk fibroin, there are also present 11 irregular sequences, with about 31 amino acid residues (irregular GT approximately GT sequences). The structure and role of these irregular sequences have remained unknown. One of the most frequently appearing irregular sequences was synthesized and its 3-D solution structure was studied by high-resolution 2-D NMR techniques. The 3-D structure determined for this peptide shows that it makes a loop structure (distorted omega shape), which implies that the preceding backbone direction is changed by 180 degrees, i.e., reversed, by this sequence. This may facilitate the beta-sheet formation between the crystal-forming building blocks, GAGAGS/GY approximately GY sequences, in the fibroin heavy chain.

Amino Acid Sequence↗