Biomedical subjects
Publications and source records attributed to Alan H Cowley.
The first examples of N,C-bonded beta-diketiminato phosphenium cations have been isolated as their triflate or tetrachloroaluminate salts, both of which have been structurally characterized.
The new Ar-BIAN complexes [(mes-BIAN)InCl(3)(THF)] (1), [(mes-BIAN)(2)Tl][PF(6)] (2), [(dipp-BIAN)SnCl(4)] (3), [(dipp-BIAN)SbCl(3)] (4), [(dipp-BIAN)BiCl(3)] (5) and [(mes-BIAN)BiCl(3)] (6) have been prepared by treatment of the neutral mes- and dipp-substituted BIAN ligands with the p-block reagents InCl(3), TlPF(6), SnCl(4), SbCl(3), and BiCl(3). The molecular structures of complexes 1-6 have been determined by single-crystal X-ray diffraction methods. However, only the atom connectivity was established for 5.
The cationic terminal borylene complex [(eta5-C5H5)(CO)2FeB(eta5-C5Me5)][AlCl4] has been isolated from the reaction of [(eta5-C5H5)(CO)2FeB(Cl)(eta1-C5Me5)] with AlCl3 and on the basis of X-ray crystallographic data, spectroscopic data and a DFT calculation it is concluded that the B-->Fe bond order is one.
The Alkyl-BIAN ligands tert-Butyl-BIAN and 1-Adamantyl-BIAN have been synthesized and their structures have been determined by single-crystal X-ray diffraction along with that of the ZnCl2 complex of tert-Butyl-BIAN.
The first example of a phosphenium cation supported by N,N'-chelation of a beta-diketiminate ligand has been prepared and structurally characterized.
Reduction of AsCl3 with SnCl2, followed by treatment of the "AsCl" with a 1,4-diimine results in electron transfer and formation of an arsenic(III) salt, while treatment of this arsenic(I) reagent or AsI3 with an alpha,alpha'-diiminopyridine ligand forms an arsenic(I) salt.
The reaction of PCl3 with SnCl2 in THF solution, followed by treatment with dpp-BIAN (dpp = 2,6-i-Pr2C6H3), affords the phosphenium complex [(dpp-BIAN)P][SnCl5.THF]. The 31P chemical shift (delta 232.5) and the metrical parameters from a single-crystal X-ray diffraction study indicate that the oxidation state of phosphorus in this compound is +3. A similar conclusion was reached regarding the phosphorus oxidation state in [(dpp-BIAN)P][I3], which was prepared via the reaction of dpp-BIAN with PI3 in CH2Cl2 solution. The arsenium salt [(dpp-BIAN)As][SnCl5.THF] was prepared by treatment of AsCl3 with SnCl2 in THF solution, followed by the addition of dpp-BIAN. The X-ray crystal structure of this salt was determined, and the pattern of bond distances and angles indicates that arsenic is present in the +3 oxidation state.
A 1 : 1 Lewis acid-base complex between CyN=C=NCy and PhBCl2 has been isolated and structurally characterized, heating of which in refluxing toluene results in the amidinate, [PhC{NCy}2]BCl2; the overall reaction has been modeled by DFT calculations.
The triple-decker cations trans-[(Cp*Sn)(2)(mu-eta(5):eta(5)-Cp*)](+) and trans-[(Cp*Pb)(2)(mu-eta(5):eta(5)-Cp*)](+) have been prepared and structurally characterized as their [B(C(6)F(5))(4)](-) salts from the reactions of [Cp*M][B(C(6)F(5))(4)](M = Sn, Pb) with the appropriate decamethylmetallocene. Both triple-decker cations adopt a cisoid arrangement of terminal Cp* groups, whereas the two known triple-decker main-group anions possess a transoid arrangement of terminal Cp groups. The reason for this conformational difference has been probed on the basis of DFT calculations.
The following new amidinate-substituted boron halides are reported: [PhC{N(SiMe(3))}(2)]BCl(2)(6), [MeC{NCy}(2)]BCl(2)(10), [Mes*C{NCy}(2)]BCl(2)(11), [MeC{N(i)Pr}(2)]BCl(2)(12), and [FcC{NCy}(2)]BBr(2)(13). Compound 6 was prepared via the trimethylsilyl chloride elimination reaction of BCl(3) with N,N,N'-tris(trimethylsilyl)benzamidine, and compounds 10-12 were prepared by salt metathesis between the lithium amidinates [RC(NR')(2)]Li and BX(3). Compound 13 was prepared via the insertion of 1,3-dicyclohexylcarbodiimide into the B-C bond of ferrocenyldibromoborane FcBBr(2). The molecular structures of 6, 10, 11, 13 and the known compound [PhC{N(SiMe(3))}(2)]BBr(2)(1) were established by single-crystal X-ray diffraction.
The first example of a stable oxoborane monomer (LB=O) stabilized by complexation to AlCl3 has been prepared by the reaction of LAlCl2 with BCl3 followed by treatment with H2O in CH2Cl2 (L = [HC(CMe)2(NC6F5)2]). DFT calculations reveal that considerable boron-oxygen double bond character is retained in this complex.
Six dimeric aminoalanes of formula [Me(2)Al-mu-N(H)Ar(F)](2)(Ar(F)= 4-C(6)H(4)F (1), 2-C(6)H(4)F (2), 3,5-C(6)H(3)F(2)(3), 2,3,4,5-C(6)HF(4)(4), 2,3,5,6-C(6)HF(4)(5) and C(6)F(5)(6)) have been prepared by treatment of the appropriate fluoroaniline with AlMe(3) in toluene solution at 25 degrees C. The structures of 1-6 were determined by X-ray crystallography.
The syntheses and structures of the first indenyl-substituted tin(II) complexes, [Sn{1,3-(SiMe3)2C9H5}2] and [Sn(C5Me5)-{1,3-(SiMe3)2C9H5}], are described; the lead(II) analogue of the latter compound has also been prepared and structurally characterized.
Donor-acceptor bonding between group 13 elements seems counter-intuitive because one normally thinks of e.g. boron and aluminium compounds as classical Lewis acids. Indeed, many such compounds have achieved industrial prominence in this regard. Recently, however, it has become possible to stabilize these and other group 13 elements in the +1 oxidation state as opposed to the archetypical +3 oxidation state. Moreover, it turns out that in the +1 oxidation state these species are excellent donors--hence the formation of these unprecedented donor-acceptor bonds. The discovery of such bonds has led, albeit indirectly, to the development of triple-decker main group cations. This aspect is also covered in the review.
The molecular structure of tetra-tert-butyldiphosphine has been determined in the gas phase by electron diffraction using the new DYNAMITE method and in the crystalline phase by X-ray diffraction. Ab initio methods were employed to gain a greater understanding of the structural preferences of this molecule in the gas phase, and to determine the intrinsic P-P bond energy, using recently described methods. Although the P-P bond is relatively long [GED 226.4(8) pm; X-ray 223.4(1) pm] and the dissociation energy is computed to be correspondingly small (150.6 kJ mol(-1)), the intrinsic energy of this bond (258.2 kJ mol(-1)) is normal for a diphosphine. The gaseous data were refined using the new Edinburgh structure refinement program ed@ed, which is described in detail. The molecular structure of gaseous P(2)Bu(t)(4) is compared to that of the isoelectronic 1,1,2,2-tetra-tert-butyldisilane. The molecules adopt a conformation with C(2) symmetry. The P-P-C angles returned from the gas electron diffraction refinement are 118.8(6) and 98.9(6) degrees, a difference of 20 degrees, whilst the C-P-C angle is 110.3(8) degrees. The corresponding parameters in the crystal are 120.9(1), 99.5(1) and 109.5(1) degrees. There are also large deformations within the tert-butyl groups, making the DYNAMITE analysis for this molecule extremely important.
The reaction of 1,3-dimesitylimidazolium chloride with Ti(NMe(2))(4) results in the 1,3-dimesitylimadazol-2-ylidene complex of Ti(NMe(2))(2)Cl(2)(3); the X-ray crystal structure of 3 evidences short intramolecular Cl...C(carbene) contacts.
Several imidazolium-hydrocarbon salts have been isolated from the reaction of stable carbenes with hydrocarbons and some of the products have been structurally characterized showing ion pair formation in the solid state characterized by the presence of well defined and transferable C-H...C(pi) interactions.
The surprising reaction of GaCl3 or InBr3 with the di-Grignard reagent [Me2Si(C5Me4)(N-t-Bu)](MgCl)2 x THF results in salts of the bimetallic anions of composition [X3M[C5Me4(N-t-Bu)]MX2]- (M = Ga, X = Cl; M = In; X = Br) in which the MX2 moiety undergoes an eta2-interaction with one of the double bonds of the localized cyclopentadienide ring.