PubMed Health⌕ Search

Biomedical subjects

Alan J Russell

Publications and source records attributed to Alan J Russell.

At least 19 recordsLinked to original sources

beta4 integrin and epidermal growth factor coordinately regulate electric field-mediated directional migration via Rac1.

Endogenous DC electric fields (EF) are present during embryogenesis and are generated in vivo upon wounding, providing guidance cues for directional cell migration (galvanotaxis) required in these processes. To understand the role of beta (beta)4 integrin in directional migration, the migratory paths of either primary human keratinocytes (NHK), beta4 integrin-null human keratinocytes (beta4-), or those in which beta4 integrin was reexpressed (beta4+), were tracked during exposure to EFs of physiological magnitude (100 mV/mm). Although the expression of beta4 integrin had no effect on the rate of cell movement, it was essential for directional (cathodal) migration in the absence of epidermal growth factor (EGF). The addition of EGF potentiated the directional response, suggesting that at least two distinct but synergistic signaling pathways coordinate galvanotaxis. Expression of either a ligand binding-defective beta4 (beta4+AD) or beta4 with a truncated cytoplasmic tail (beta4+CT) resulted in loss of directionality in the absence of EGF, whereas inhibition of Rac1 blinded the cells to the EF even in the presence of EGF. In summary, both the beta4 integrin ligand-binding and cytoplasmic domains together with EGF were required for the synergistic activation of a Rac-dependent signaling pathway that was essential for keratinocyte directional migration in response to a galvanotactic stimulus.

Cell Movement↗

Characterizing the modification of surface proteins with poly(ethylene glycol) to interrupt platelet adhesion.

Surface protein modification with poly(ethylene glycol) (PEG) can inhibit acute thrombosis on damaged vascular and biomaterial surfaces by blocking surface protein-platelet interactions. However, the feasibility of employing protein reactive PEGs to limit intravascular and biomaterial thrombosis in vivo is contingent upon rapid and extensive surface protein modification. To characterize the factors controlling this potential therapeutic approach, the model protein bovine serum albumin was adsorbed onto polyurethane surfaces and modified with PEG-carboxymethyl succinimidyl ester (PEG-NHS), PEG-isocyanate (PEG-ISO), or PEG-diisocyanate (PEG-DISO) in aqueous buffer at varying concentrations and contact times. It was found that up to 5 PEGs could be attached per albumin molecule within one min and that adsorbed albumin PEGylation approached maximal levels by 6min. The lability of reactive PEGs in aqueous buffer reduced total protein modification by 50% when the PEG solution was incubated for 7min prior to application. For fibrinogen PEGylation (performed in the solution phase), PEG-NHS was more reactive than PEG-ISO or PEG-DISO. The gamma peptide of fibrinogen, which contains several key platelet-binding motifs, was highly modified. A marked reduction in platelet adhesion was observed on fibrinogen-adsorbed polyurethane treated with PEG-NHS or PEG-DISO. Relative differences in platelet adhesion on PEG-NHS and PEG-DISO modified surfaces could be attributed to differences in reactivity towards fibrinogen and the size of the polymer backbone. Taken together, these findings provide insight and guidance for applying protein reactive PEGs for the interruption of acute thrombotic deposition.

Animals↗

Poly(N-vinylformamide)-A drag-reducing polymer for biomedical applications.

Water-soluble drag-reducing polymers (DRPs) were previously demonstrated to significantly increase blood flow, tissue perfusion, and tissue oxygenation when injected intravenously at nanomolar concentrations in various animal models. Turbulent flow drag-reducing ability was proven to be the most important factor defining the potential of polymers to favorably affect blood circulation. Several DRPs were applied in previous in vivo tests, but the search continues for suitable DRPs for biomedical applications. We demonstrated that poly(N-vinylformamide) (PNVF) with a molecular weight of 4.5 x 10(6) Da significantly reduced resistance to turbulent flow in a pipe and thus presents a DRP. We also found that the PNVF mechanical degradation is much slower than that of the most commonly used DRP, poly(ethylene oxide). PNVF is known to have low toxicity. Furthermore, our pilot in vivo study showed that PNVF had acceptable biocompatibility and hemodynamic effectiveness and thus could be considered as a DRP candidate for potential clinical use.

Amides↗

Surface-active antifungal polyquaternary amine.

There is a distinct need for antimicrobial compounds that can act at surfaces without leaching into the environment. Such materials should be easy to synthesize, be easy to apply to surfaces, and display reasonable levels of antimicrobial and antifungal activity. Here we describe such a surface-active compound and demonstrate its ability to inhibit the growth of the filamentous fungus Aspergillus niger. We have synthesized a series of polyquaternary ammonium compounds by atom transfer radical polymerization. Two members of this series were tested for their ability to inhibit the growth of A. niger. The compounds were dried onto surfaces, and the treated surfaces were then used as growth chambers for A. niger. A water soluble polyquaternary amine compound was shown to effectively kill A. niger in solution in a dose-dependent manner. Conversely, a water insoluble polyquaternary amine compound was shown to kill only the fungi in direct contact with the material on the surface. These results have important implications for the development of effective, environmentally benign, surface-active anti-fungal compounds.

Amines↗

Tissue engineering and the challenges within.

Researchers face many challenges, both scientific and societal, in the field of tissue engineering. Herein we discuss the challenges in material design, selection of therapeutic cell source, the in vitro culturing of cells and materials, and finally the integration of the cultured construct into the body. We focus special attention on a new approach to the design of a biomaterial that would bridge synthetic and biologic materials seamlessly. The scaffolds we have developed serve as a transitional material between biotic and abiotic systems.

Animals↗

Calcium alginate microencapsulation of ovarian follicles impacts FSH delivery and follicle morphology.

BACKGROUND: We have previously shown that suspension culture prevents follicle flattening and maintains three-dimensional follicle architecture better than culture on flat plates. However, many of the follicles cultured in suspension do eventually rupture, as basement membrane integrity is lost and the three-dimensional structure of the follicle is altered. Therefore, the objective of this study is to support three-dimensional follicle architecture during in vitro growth of ovarian follicles through encapsulation in calcium alginate, while maintaining responsiveness to FSH stimulation. METHODS: Preantral follicles (150-160 micrometers in diameter) were isolated from the ovaries of juvenile rats and grown in culture tubes or encapsulated in calcium alginate and grown in culture tubes. Previous studies revealed that follicles maintained structural integrity but did not grow as well when encapsulated in calcium alginate. In these studies, we evaluated the effect of calcium alginate on FSH-stimulated follicle growth, survival, and morphology in suspension culture. Follicles were grown under 5 culture conditions: 1) not encapsulated; with FSH in the medium, 2) encapsulated in the absence of FSH, grown in medium without FSH, 3) encapsulated with calcium alginate containing FSH but grown in medium without FSH, 4) encapsulated without FSH but grown in medium containing FSH and 5) encapsulated with calcium alginate containing FSH and in medium containing FSH. To assess growth rates, follicles were cultured for 72 hours and analyzed for follicle size increase and DNA content. Survival analysis for encapsulated and unencapsulated follicles was performed by constructing a Kaplan Meier survival curve of daily observations of intact follicle survival. Three-dimensional architecture was assessed histologically and by analysis of the pattern of connexin 43 expression in the cultured follicles. RESULTS: In the absence of FSH, follicle diameter increased by only 6.4%. When FSH was included in the alginate bead alone or the media alone, the follicle diameter increased by 13.5% and 19.9% respectively. This was greater than follicles cultured in the absence of FSH (p < 0.05), but less than that of the FSH-treated unencapsulated follicles (p < 0.05). However, when follicles were cultured with FSH included in both the media and the bead, a 32.6% increase in follicle diameter was observed, statistically no different than the growth rate of the unencapsulated follicles grown with FSH. CONCLUSION: Microencapsulation supports three-dimensional follicle growth, but may limit access to hormones in the medium resulting in altered development compared to unencapsulated follicles. Inclusion of FSH in the alginate bead restores the follicle growth response to FSH, while also providing a scaffold of support for three-dimensional growth. The application of tissue engineering principles to the problems of follicle culture in vitro may provide advances applicable to fertility preservation in women and endangered species.

Alginates↗

Surface dispersion and hardening of self-assembled diacetylene nanotubes.

We describe here the first method for dispersion of individual self-assembled diacetylene nanotubes on surfaces. Complete polymerization by UV exposure was achieved as demonstrated by nanotubes that were resistant to aggressive organic solvents and temperatures well above the melting point of the monomer. The polymerized tubes displayed reversible thermochromic and mechanochromic properties.

Journal Article↗

A stable three-enzyme creatinine biosensor. 1. Impact of structure, function and environment on PEGylated and immobilized sarcosine oxidase.

The determination of creatinine levels in biological fluids is an increasingly important clinical requirement. Amperometric biosensors have been developed based on a three-enzyme system which converts creatinine to amperometrically measurable hydrogen peroxide. The development of the amperometric creatinine biosensor has been slow due the complexity of the three-enzyme system. This paper, the first of three, discusses the chemical modification of sarcosine oxidase and the immobilization and stabilization of this enzyme using polyurethane prepolymers. Sarcosine oxidase was completely inactivated after modification using poly(ethylene glycol) activated with isocyanate. The addition of a competitive inhibitor during enzyme modification was effective in protecting the enzyme from inactivation. Computational analysis of the structure of sarcosine oxidase suggests that there is a lysine in the active site that may be hyper-reactive. The enzyme was irreversibly immobilized using polyurethane prepolymers and retained significant activity. The enzyme's half-life at 37 degrees C increased from seven days to more than 50 days after immobilization.

Biosensing Techniques↗

A stable three enzyme creatinine biosensor. 2. Analysis of the impact of silver ions on creatine amidinohydrolase.

The enzyme creatine amidinohydrolase is a clinically important enzyme used in the determination of creatinine in blood and urine. Continuous use biosensors are becoming more important in the clinical setting; however, long-use creatinine biosensors have not been commercialized due to the complexity of the three-enzyme creatinine biosensor and the lack of stability of its components. This paper, the second in a series of three, describes the immobilization and stabilization of creatine amidinohydrolase. Creatine amidinohydrolase modified with poly(ethylene glycol) activated with isocyanate retains significant activity after modification. The enzyme was successfully immobilized into hydrophilic polyurethanes using a reactive prepolymer strategy. The immobilized enzyme retained significant activity over a 30 day period at 37 degrees C and was irreversibly immobilized into the polymer. Despite being stabilized in the polymer, the enzyme remained highly sensitive to silver ions which were released from the amperometric electrodes. Computational analysis of the structure of the protein using the Gaussian network model suggests that the silver ions bind tightly to a cysteine residue preventing normal enzyme dynamics and catalysis.

Biosensing Techniques↗

A stable three-enzyme creatinine biosensor. 3. Immobilization of creatinine amidohydrolase and sensor development.

We describe the development of an extended use amperometric three-enzyme creatinine biosensor and the successful chemical modification and immobilization of the enzyme creatinine amidohydrolase using polyurethane prepolymers. Creatinine amidohydrolase is significantly stabilized by immobilization in polyurethane polymers. The half-life increases from six to more than 80 days in buffer at 37 degrees C. The effect of silver ions leached from amperometric reference electrodes on enzyme and sensor performance is discussed. The use of cellulose acetate cover membranes to prevent silver from reaching the enzyme is investigated. Sensors prepared with cover membranes have half-lives almost an order of magnitude greater than those prepared with no cover membrane over the silver electrode. The complete biosensor has been constructed on a clinical blood analyzer platform and is stable for many days.

Amidohydrolases↗

Self-assembly of biocidal nanotubes from a single-chain diacetylene amine salt.

We describe the facile two-step synthesis of nanotubes that form pure, well-defined, nanostructured materials. We have synthesized a secondary amine HBr salt as the headgroup of a single-chain diacetylenic lipid. This molecule can form a number of different self-assembled nanostructures in aqueous or organic solvents. In water, this lipid forms a monodisperse preparation of nanotubes at high yields. Partially dissolving a preparation of nanotubes dried from aqueous solution results in a remarkably organized structure that resembles a nanocarpet. Details of the nanotube structure were investigated by scanning electron microscopy, transmission electron microscopy, and small-angle X-ray spectroscopy. The aqueous nanotubes have a cross-sectional diameter of 89 nm. The walls of the tubes are an exquisitely uniform 27 nm thick and are shown to consist of five lipid bilayers with a repeat spacing of 57.8 A. The chemical structure of the material shows no chiral centers, but suspensions of the nanotubes in an aqueous medium show an unexpected circular dichroism signal. The versatility of this new material as a platform for nanostructure design and synthesis is enhanced by its biocidal activity. This antimicrobial activity along with the regularity the nanostructures will enhance the development of a range of applications from biosensors to artificial retinas.

Acetylene↗

Enhancing bioplastic-substrate interaction via pore induction and directed migration of enzyme location.

We demonstrate two novel approaches to enhance interactions of polymer-immobilized biomolecules with their substrates. In the first approach, diisopropylfluorophosphatase (DFPase) containing poly(urethane) (PU) coatings were made microporous by incorporating, then extracting, poly(ethylene glycol)-based diesters as porogens. Incorporation of 2% w/w porogen increased the effective diffusion coefficient of diisopropylfluorophosphate (DFP) through the coatings by 30% and increased the apparent turnover number of immobilized DFPase 3-fold. In the second approach, prior to immobilization, hydrophobic modification of DFPase was achieved through its conjugation with a dimer/trimer mixture of a uretdione based on 1,6-diisocyanatohexane. When the hydrophobically modified DFPase was immobilized in coatings, catalytic activity was 4-fold higher than that of the equivalent, immobilized, native DFPase. This activity enhancement was independent of the presence or absence of pores. Confocal microscopy images of coatings containing fluorescently labeled lysozyme show that the native enzyme is distributed uniformly over the entire thickness of the coatings. Hydrophobically modified and fluorescently labeled lysozyme is accumulated only in the upper 10 microm cross-sectional layer of a 100 microm-thick coating. Interactions of bioplastics with their substrates are tunable either by pore induction in a polymer or by directed migration of the hydrophobically modified biomolecule to the desired location. The latter approach has broad implications, including overcoming mass transfer limitations experienced by immobilized biocatalysts.

Coated Materials, Biocompatible↗

Alpha 6 beta 4 integrin regulates keratinocyte chemotaxis through differential GTPase activation and antagonism of alpha 3 beta 1 integrin.

Growth factor-induced cell migration and proliferation are essential for epithelial wound repair. Cell migration during wound repair also depends upon expression of laminin-5, a ligand for alpha 6 beta 4 integrin. We investigated the role of alpha 6 beta 4 integrin in laminin-5-dependent keratinocyte migration by re-expressing normal or attachment-defective beta 4 integrin in beta 4 integrin null keratinocytes. We found that expression of beta 4 integrin in either a ligand bound or ligand unbound state was necessary and sufficient for EGF-induced cell migration. In a ligand bound state, beta 4 integrin supported EGF-induced cell migration though sustained activation of Rac1. In the absence of alpha 6 beta 4 integrin ligation, Rac1 activation became tempered and EGF chemotaxis proceeded through an alternate mechanism that depended upon alpha 3 beta 1 integrin and was characterized by cell scattering. alpha 3 beta 1 integrin also relocalated from cell-cell contacts to sites of basal clustering where it displayed increased conformational activation. The aberrant distribution and activation of alpha 3 beta 1 integrin in attachment-defective beta 4 cells could be reversed by the activation of Rac1. Conversely, in WT beta 4 cells the normal cell-cell localization of alpha 3 beta 1 integrin became aberrant after the inhibition of Rac1. These studies indicate that the extracellular domain of beta 4 integrin, through its ability to bind ligand, functions to integrate the divergent effects of growth factors on the cytoskeleton and adhesion receptors so that coordinated keratinocyte migration can be achieved.

Cell Adhesion Molecules↗

Biomaterials for mediation of chemical and biological warfare agents.

Recent events have emphasized the threat from chemical and biological warfare agents. Within the efforts to counter this threat, the biocatalytic destruction and sensing of chemical and biological weapons has become an important area of focus. The specificity and high catalytic rates of biological catalysts make them appropriate for decommissioning nerve agent stockpiles, counteracting nerve agent attacks, and remediation of organophosphate spills. A number of materials have been prepared containing enzymes for the destruction of and protection against organophosphate nerve agents and biological warfare agents. This review discusses the major chemical and biological warfare agents, decontamination methods, and biomaterials that have potential for the preparation of decontamination wipes, gas filters, column packings, protective wear, and self-decontaminating paints and coatings.

Biocompatible Materials↗

Impact of ionic liquid physical properties on lipase activity and stability.

Lipase activity and stability was investigated in dialkylimidazolium and pyrrolidinium-based ionic liquids with a variety of anions including hexafluorophosphate, acetate, nitrate, methanesulfonate, trifluoroacetate, and trifluoromethylsulfonate. The initial rate of lipase-catalyzed transesterification of methyl methacrylate in these ionic liquids and several organic solvents was examined as well as the polytransesterification of divinyl adipate and 1,4-butanediol. Free lipase (Candida rugosa) catalyzed the transesterification of methyl methacrylate in 1-butyl-3-methylimidazolium hexafluorophosphate at a rate 1.5 times greater than in hexane. However, no detectable activity was observed in all the "hydrophilic" ionic liquids studied. Methods of enzyme stabilization including adsorption, PEG-modification, and immobilization in polyurethane foam were ineffective in improving enzymatic activity in the hydrophilic ionic liquids. Polytransesterifications performed in 1-butyl-3-methylimidazolium hexafluorophosphate using Novozym 435 produced polyesters with weight average molecular weights limited to 2900 Da due to precipitation of the polymer. Solvatochromic studies and partition coefficient measurements suggest that ionic liquids are more polar and hydrophilic than organic solvents such as hexane, acetonitrile, and tetrahydrofuran. Stability studies indicate that lipases exhibit greater stability in ionic liquids than in organic solvents including hexane.

Anions↗

NF-kappaB blockade and oncogenic Ras trigger invasive human epidermal neoplasia.

The nuclear factor NF-kappaB and oncogenic Ras can alter proliferation in epidermis, the most common site of human cancer. These proteins are implicated in epidermal squamous cell carcinoma in mice, however, the potential effects of altering their function are uncertain. Whereas inhibition of NF-kappaB enhances apoptosis in certain tumours, blockade of NF-kappaB predisposes murine skin to squamous cell carcinoma. Because therapeutics inhibiting Ras and NF-kappaB pathways are being developed to treat human cancer, it is essential to assess the effects of altering these regulators. The medical relevance of murine studies is limited, however, by differences between mouse and human skin, and by the greater ease of transforming murine cells. Here we show that in normal human epidermal cells both NF-kappaB and oncogenic Ras trigger cell-cycle arrest. Growth arrest triggered by oncogenic Ras can be bypassed by IkappaBalpha-mediated blockade of NF-kappaB, generating malignant human epidermal tissue resembling squamous cell carcinoma. Human cell tumorigenesis is dependent on laminin 5 and alpha6beta4 integrin. Thus, IkappaBalpha circumvents restraints on growth promotion induced by oncogenic Ras and can act with Ras to induce invasive human tissue neoplasia.

Animals↗

High-activity enzyme-polyurethane coatings.

The synthesis of water-borne polyurethane coatings in the presence of diisopropylfluorophosphatase (DFPase, E.C. 3.8.2.1) enabled the irreversible attachment of the enzyme to the polymeric matrix. The distribution of immobilized DFPase as well as activity retention are homogeneous within the coating. The resulting enzyme-containing coating (ECC) film hydrolyzes diisopropylfluorophosphate (DFP) in buffered media at high rates, retaining approximately 39% intrinsic activity. Decreasing ECC hydrophilicity, via the use of a less hydrophilic polyisocyanate during polymerization, significantly enhanced the intrinsic activity of the ECC. DFPase-ECC has biphasic deactivation kinetics, where the initial rapid deactivation of DFPase-ECC leads to the formation of a hyperstable and active form of enzyme.

Coated Materials, Biocompatible↗