PubMed Health⌕ Search

Biomedical subjects

Alan M Lambowitz

Publications and source records attributed to Alan M Lambowitz.

30 records · Page 2Linked to original sources

Effects of maturase binding and Mg2+ concentration on group II intron RNA folding investigated by UV cross-linking.

The Lactococcus lactis Ll.LtrB group II intron encodes a reverse transcriptase/maturase (LtrA protein) that promotes RNA splicing by stabilizing the catalytically active RNA structure. Here, we mapped 17 UV cross-links induced in both wild-type Ll.LtrB RNA and Ll.LtrB-Delta2486 RNA, which has a branch-point deletion that prevents splicing, and we used these cross-links to follow tertiary structure formation under different conditions in the presence or absence of the LtrA protein. Twelve of the cross-links are long-range, with six near known tertiary interaction sites in the active RNA structure. In a reaction medium containing 0.5 M NH(4)Cl, eight of the 17 cross-links were detected in the absence of Mg(2+) or the presence of EDTA, and all were detected at 5 mM Mg(2+), where efficient splicing requires the LtrA protein. The frequencies of all but four cross-links increased with increasing Mg(2+) concentrations, becoming maximal between 4 and 50 mM Mg(2+), where the intron is self-splicing. These findings suggest that a high Mg(2+) concentration induces self-splicing by globally stabilizing tertiary structure, including key tertiary interactions that are required for catalytic activity. Significantly, the binding of the maturase under protein-dependent splicing conditions (0.5 M NH(4)Cl and 5 mM Mg(2+)) increased the frequency of only nine cross-links, seven of which are long-range, suggesting that, in contrast to a high Mg(2+) concentration, LtrA promotes splicing by stabilizing critical tertiary structure interactions, while leaving other regions of the intron relatively flexible. This difference may contribute to the high rate of protein-dependent splicing, relative to the rate of self-splicing. The propensity of the intron RNA to form tertiary structure even at relatively low Mg(2+) concentrations raises the possibility that the maturase functions at least in part by tertiary structure capture. Finally, an abundant central wheel cross-link, present in >50% of the molecules at 5 mM Mg(2+), suggests models in which group II intron domains I and II are either coaxially stacked or aligned in parallel, bringing the 5'-splice site together with the 3'-splice site and catalytic core elements at JII/III. This and other cross-links provide new constraints for three-dimensional structural modeling of the group II intron catalytic core.

Base Sequence↗

Group II intron mobility using nascent strands at DNA replication forks to prime reverse transcription.

The Lactococcus lactis Ll.LtrB group II intron uses a major retrohoming mechanism in which the excised intron RNA reverse splices into one strand of a DNA target site, while the intron-encoded protein uses a C-terminal DNA endonuclease domain to cleave the opposite strand and then uses the cleaved 3' end as a primer for reverse transcription of the inserted intron RNA. Here, experiments with mutant introns and target sites indicate that Ll.LtrB can retrohome without second-strand cleavage by using a nascent strand at a DNA replication fork as the primer for reverse transcription. This mechanism connecting intron mobility to target DNA replication may be used by group II intron species that encode proteins lacking the C-terminal DNA endonuclease domain and for group II intron retrotransposition to ectopic sites.

Bacterial Proteins↗

Mobility of the Sinorhizobium meliloti group II intron RmInt1 occurs by reverse splicing into DNA, but requires an unknown reverse transcriptase priming mechanism.

The mobile group II introns characterized to date encode ribonucleoprotein complexes that promote mobility by a major retrohoming mechanism in which the intron RNA reverse splices directly into the sense strand of a double-stranded DNA target site, while the intron-encoded reverse transcriptase/maturase cleaves the antisense strand and uses it as primer for reverse transcription of the inserted intron RNA. Here, we show that the Sinorhizobium meliloti group II intron RmInt1, which encodes a protein lacking a DNA endonuclease domain, similarly uses both the intron RNA and an intron-encoded protein with reverse transcriptase and maturase activities for mobility. However, while RmInt1 reverse splices into both single-stranded and double-stranded DNA target sites, it is unable to carry out site-specific antisense-strand cleavage due to the lack of a DNA endonuclease domain. Our results suggest that RmInt1 mobility involves reverse splicing into double-stranded or single-stranded DNA target sites, but due to the lack of DNA endonuclease function, it requires an alternate means of procuring a primer for target DNA-primed reverse transcription.

Base Sequence↗

Targeted and random bacterial gene disruption using a group II intron (targetron) vector containing a retrotransposition-activated selectable marker.

Mobile group II introns have been used to develop a novel class of gene targeting vectors, targetrons, which employ base pairing for DNA target recognition and can thus be programmed to insert into any desired target DNA. Here, we have developed a targetron containing a retrotransposition-activated selectable marker (RAM), which enables one-step bacterial gene disruption at near 100% efficiency after selection. The targetron can be generated via PCR without cloning, and after intron integration, the marker gene can be excised by recombination between flanking Flp recombinase sites, enabling multiple sequential disruptions. We also show that a RAM-targetron with randomized target site recognition sequences yields single insertions throughout the Escherichia coli genome, creating a gene knockout library. Analysis of the randomly selected insertion sites provides further insight into group II intron target site recognition rules. It also suggests that a subset of retrohoming events may occur by using a primer generated during DNA replication, and reveals a previously unsuspected bias for group II intron insertion near the chromosome replication origin. This insertional bias likely reflects at least in part the higher copy number of origin proximal genes, but interaction with the replication machinery or other features of DNA structure or packaging may also contribute.

Base Sequence↗

Putative proteins related to group II intron reverse transcriptase/maturases are encoded by nuclear genes in higher plants.

The Arabidopsis thaliana nuclear genome sequence revealed several open reading frames encoding proteins related to group II intron-encoded reverse transcriptase/maturases. Here, we show via sequence alignments that at least four such open reading frames are conserved in the nuclear genomes of A.thaliana and Oryza sativa (rice) and that they encode putative proteins belonging to two different classes (nMat-1 and nMat-2), neither of which is associated with a group II intron RNA structure. The two nMat-1 proteins have reverse transcriptase, maturase and DNA endonuclease domains characteristic of canonical group II intron-encoded proteins, while the two nMat-2 proteins have reverse transcriptase and maturase domains linked to a novel C-terminal domain. Although some nMat proteins have mutations expected to inactivate intron mobility functions, all could potentially retain the RNA splicing function. These nuclear maturase-like proteins may be imported into organelles to function in group II intron splicing and/or they may have assumed other cellular functions. Nuclear-encoded maturases could regulate organellar gene expression and may reflect a step in the evolution of mobile group II introns into spliceosomal introns.

Amino Acid Sequence↗

The pathway for DNA recognition and RNA integration by a group II intron retrotransposon.

Group II intron RNPs are mobile genetic elements that attack and invade duplex DNA. In this work, we monitor the invasion reaction in vitro and establish a quantitative kinetic framework for the steps of this complex cascade. We find that target site specificity is achieved after DNA binding, which occurs nonspecifically. RNP searches the bound DNA before undergoing a conformational change that is associated with identification of its specific binding site. The study reveals a facile equilibrium between intron invasion and splicing, indicating that RNP invasion of top strand DNA is a relatively unfavorable event. Group II mobility must therefore depend on the trapping of invasion products, potentially through interaction of the intron-encoded protein with the DNA target and/or initiation of reverse transcription.

Bacterial Proteins↗

Genetic manipulation of Lactococcus lactis by using targeted group II introns: generation of stable insertions without selection.

Despite their commercial importance, there are relatively few facile methods for genomic manipulation of the lactic acid bacteria. Here, the lactococcal group II intron, Ll.ltrB, was targeted to insert efficiently into genes encoding malate decarboxylase (mleS) and tetracycline resistance (tetM) within the Lactococcus lactis genome. Integrants were readily identified and maintained in the absence of a selectable marker. Since splicing of the Ll.ltrB intron depends on the intron-encoded protein, targeted invasion with an intron lacking the intron open reading frame disrupted TetM and MleS function, and MleS activity could be partially restored by expressing the intron-encoded protein in trans. Restoration of splicing from intron variants lacking the intron-encoded protein illustrates how targeted group II introns could be used for conditional expression of any gene. Furthermore, the modified Ll.ltrB intron was used to separately deliver a phage resistance gene (abiD) and a tetracycline resistance marker (tetM) into mleS, without the need for selection to drive the integration or to maintain the integrant. Our findings demonstrate the utility of targeted group II introns as a potential food-grade mechanism for delivery of industrially important traits into the genomes of lactococci.

Bacterial Proteins↗

The DIVa maturase binding site in the yeast group II intron aI2 is essential for intron homing but not for in vivo splicing.

Splicing of the Saccharomyces cerevisiae mitochondrial DNA group II intron aI2 depends on the intron-encoded 62-kDa reverse transcriptase-maturase protein (p62). In wild-type strains, p62 remains associated with the excised intron lariat RNA in ribonucleoprotein (RNP) particles that are essential for intron homing. Studies of a bacterial group II intron showed that the DIVa substructure of intron domain IV is a high-affinity binding site for its maturase. Here we first present in vitro evidence extending that conclusion to aI2. Then, experiments with aI2 DIVa mutant strains show that the binding of p62 to DIVa is not essential for aI2 splicing in vivo but is essential for homing. Because aI2 splicing in the DIVa mutant strains remains maturase dependent, splicing must rely on other RNA-protein contacts. The p62 that accumulates in the mutant strains has reverse transcriptase activity, but fractionation experiments at high and low salt concentrations show that it associates more weakly than the wild-type protein with endogenous mitochondrial RNAs, and that phenotype probably explains the homing defect. Replacing the DIVa of aI2 with that of the closely related intron aI1 improves in vivo splicing but not homing, indicating that DIVa contributes to the specificity of the maturase-RNA interaction needed for homing.

Base Sequence↗

Characterization of the C-terminal DNA-binding/DNA endonuclease region of a group II intron-encoded protein.

Group II intron retrohoming occurs by a mechanism in which the intron RNA reverse splices directly into one strand of a double-stranded DNA target site, while the intron-encoded reverse transcriptase uses a C-terminal DNA endonuclease activity to cleave the opposite strand and then uses the cleaved 3' end as a primer for reverse transcription of the inserted intron RNA. Here, we characterized the C-terminal DNA-binding/DNA endonuclease region of the LtrA protein encoded by the Lactococcus lactis Ll.LtrB intron. This C-terminal region consists of an upstream segment that contributes to DNA binding, followed by a DNA endonuclease domain that contains conserved sequence motifs characteristic of H-N-H DNA endonucleases, interspersed with two pairs of conserved cysteine residues. Atomic emission spectroscopy of wild-type and mutant LtrA proteins showed that the DNA endonuclease domain contains a single tightly bound Mg(2+) ion at the H-N-H active site. Although the conserved cysteine residue pairs could potentially bind Zn(2+), the purified LtrA protein is active despite the presence of only sub-stoichiometric amounts of Zn(2+), and the addition of exogenous Zn(2+) inhibits the DNA endonuclease activity. Multiple sequence alignments identified features of the DNA-binding region and DNA endonuclease domain that are conserved in LtrA and related group II intron proteins, and their functional importance was demonstrated by unigenic evolution analysis and biochemical assays of mutant LtrA protein with alterations in key amino acid residues. Notably, deletion of the DNA endonuclease domain or mutations in its conserved sequence motifs strongly inhibit reverse transcriptase activity, as well as bottom-strand cleavage, while retaining other activities of the LtrA protein. A UV-cross-linking assay showed that these DNA endonuclease domain mutations do not block DNA primer binding and thus likely inhibit reverse transcriptase activity either by affecting the positioning of the primer or the conformation of the reverse transcriptase domain.

Amino Acid Motifs↗

A DEAD-box protein functions as an ATP-dependent RNA chaperone in group I intron splicing.

The Neurospora crassa CYT-18 protein, the mitochondrial tyrosyl-tRNA synthetase, functions in splicing group I introns by inducing formation of the catalytically active RNA structure. Here, we identified a DEAD-box protein (CYT-19) that functions in concert with CYT-18 to promote group I intron splicing in vivo and vitro. CYT-19 does not bind specifically to group I intron RNAs and instead functions as an ATP-dependent RNA chaperone to destabilize nonnative RNA structures that constitute kinetic traps in the CYT-18-assisted RNA-folding pathway. Our results demonstrate that a DExH/D-box protein has a specific, physiologically relevant chaperone function in the folding of a natural RNA substrate.

Adenosine Triphosphatases↗

Binding of a group II intron-encoded reverse transcriptase/maturase to its high affinity intron RNA binding site involves sequence-specific recognition and autoregulates translation.

Mobile group II introns encode reverse transcriptases that bind specifically to the intron RNAs to promote both intron mobility and RNA splicing (maturase activity). Previous studies with the Lactococcus lactis Ll.LtrB intron suggested a model in which the intron-encoded protein (LtrA) binds first to a primary high-affinity binding site in intron subdomain DIVa, an idiosyncratic structure at the beginning of the LtrA coding sequence, and then makes additional contacts with conserved regions of the intron to fold the RNA into the catalytically active structure. Here, we analyzed the DIVa binding site by iterative in vitro selection and in vitro mutagenesis. Our results show that LtrA binds to a small region at the distal end of DIVa that contains the ribosome-binding site and initiation codon of the LtrA open reading frame. The critical elements are in a small stem-loop structure emanating from a purine-rich internal loop, with both sequence and structure playing a role in LtrA recognition. The ribosome-binding site falls squarely within the LtrA-binding region and is sequestered directly by the binding of LtrA or by stabilization of the small stem-loop or both. Finally, by using LacZ fusions in Escherichia coli, we show that the binding of LtrA to DIVa down-regulates translation. This mode of regulation limits accumulation of the potentially deleterious intron-encoded protein and may facilitate splicing by halting ribosome entry into the intron. The recognition of the DIVa loop-stem-loop structure accounts, in part, for the intron specificity of group II intron maturases and has parallels in template-recognition mechanisms used by other reverse transcriptases.

Bacterial Proteins↗

tRNA-like recognition of group I introns by a tyrosyl-tRNA synthetase.

The Neurospora crassa mitochondrial tyrosyl-tRNA synthetase (CYT-18 protein) functions in splicing group I introns by promoting the formation of the catalytically active RNA structure. Previous work suggested that CYT-18 recognizes a conserved tRNA-like structure of the group I intron catalytic core. Here, directed hydroxyl-radical cleavage assays show that the nucleotide-binding fold and C-terminal domains of CYT-18 interact with the expected group I intron cognates of the aminoacyl-acceptor stem and D-anticodon arms, respectively. Further, three-dimensional graphic modeling, supported by biochemical data, shows that conserved regions of group I introns can be superimposed over interacting regions of the tRNA in a Thermus thermophilus TyrRS/tRNA(Tyr) cocrystal structure. Our results support the hypothesis that CYT-18 and other aminoacyl-tRNA synthetases interact with group I introns by recognizing conserved tRNA-like structural features of the intron RNAs.

Cloning, Molecular↗