Biomedical subjects

Albrecht Paschke

Publications and source records attributed to Albrecht Paschke.

10 recordsLinked to original sources

PubMed2007

Silicone rod extraction of pharmaceuticals from water.

Silicone elastomer (in the form of a flexible rod) is one of the materials currently tested for use in analytical extraction techniques and passive sampling devices. We investigated the applicability of this material for the enrichment of selected polar pharmaceuticals (antipyrine, carbamazepine, diclofenac, ibuprofen, bezafibrate) from water. Time-resolved batch extraction tests (up to five weeks in duration) were performed in stirred water samples ( approximately 0.5 L) with 2-cm-long silicone rod pieces. After re-extraction of trapped compounds with methanol, analysis was performed using liquid chromatography coupled with mass spectrometry. Distribution equilibrium was reached after a test duration of seven days. The silicone rod/water partition coefficients of the investigated pharmaceuticals range from 4 (antipyrine) to 1250 (diclofenac), and are related to the hydrophobicity of the compound. Enrichment of these pharmaceuticals in the silicone rod is lower than for other compound classes (chlorinated and polycyclic hydrocarbons).

Antipyrine↗

PubMed2006

Rapid semi-continuous calibration and field test of membrane-enclosed silicone collector as passive water sampler.

The new membrane-enclosed silicone collector (MESCO) was, in two different configurations with respect to the thickness of low-density polyethylene membrane used, subject to serial batch extraction tests to obtain (preliminary) sampling rates for estimating water concentrations of selected chlorinated organic compounds and polycyclic aromatic hydrocarbons. This rapid calibration procedure is simple to implement compared to experiments in a flow-through apparatus and yielded reasonable sampling rates in the range of 50 microL-2 mL per hour for the compounds tested. The new MESCO formats were also exposed for 28 days in the polluted creek to test their field performance. For priority contaminants of special interest, alpha-hexachlorocyclohexane and hexachlorobenzene, the time-weighted average concentrations derived from the freshly calibrated sampling devices agree well with those obtained by conventional water analysis of spot samples.

Calibration↗

PubMed2006

Radon as a naturally occurring tracer for the assessment of residual NAPL contamination of aquifers.

The noble gas radon has a strong affinity to non-aqueous phase-liquids (NAPLs). That property makes it applicable as naturally occurring partitioning tracer for assessing residual NAPL contamination of aquifers. In a NAPL contaminated aquifer, radon dissolved in the groundwater partitions preferably into the NAPL. The magnitude of the resulting radon deficit in the groundwater depends on the NAPL-specific radon partition coefficient and on the NAPL saturation of the pore space. Hence, if the partition coefficient is known, the NAPL saturation is attainable by determination of the radon deficit. After a concise discussion of theoretical aspects regarding radon partitioning into NAPL, related experimental data and results of a field investigation are presented. Aim of the laboratory experiments was the determination of radon partition coefficients of multi-component NAPLs of environmental concern. The on-site activities were carried out in order to confirm the applicability of the "radon method" under field conditions.

Environmental Pollutants↗

PubMed2006

Comparative application of solid-phase microextraction fibre assemblies and semi-permeable membrane devices as passive air samplers for semi-volatile chlorinated organic compounds. A case study on the landfill "Grube Antonie" in Bitterfeld, Germany.

Solid phase microextraction (SPME) fibres coated with Carbowax/divinylbenzene and semi-permeable membrane devices (SPMDs) of standard configuration were used to obtain time-weighted average (TWA) field air concentrations of selected chlorinated semi-volatile compounds on a landfill, where large amounts of lindane by-products were deposited, together with other hazardous chemical residues in the past. Additionally, spot sampling with SPME fibres was performed to identify the emission hotspot and sampling rates were determined/predicted for the substances of interest. Both samplers yield comparable TWA air concentrations of lindane and its isomers and of DDT with its metabolites and gain in certainty about the landfill as remaining source of air pollution with these compounds in the region. Both SPME fibres and SPMDs (respective their modifications) can be recommended as sampling tools in process studies and larger air monitoring programmes. However, further calibration studies and field tests are necessary to obtain reliable sampling rates for a wider range of semi-volatile compounds.

Air Pollutants↗

PubMed2006

Calibration and field performance of membrane-enclosed sorptive coating for integrative passive sampling of persistent organic pollutants in water.

Membrane-enclosed sorptive coating (MESCO) is a miniaturised monitoring device that enables integrative passive sampling of persistent, hydrophobic organic pollutants in water. The system combines the passive sampling with solventless preconcentration of organic pollutants from water and subsequent desorption of analytes on-line into a chromatographic system. Exchange kinetics of chemicals between water and MESCO was studied at different flow rates of water, in order to characterize the effect of variable environmental conditions on the sampler performance, and to identify a method for in situ correction of the laboratory-derived calibration data. It was found that the desorption of chemicals from MESCO into water is isotropic to the absorption of the analytes onto the sampler under the same exposure conditions. This allows for the in situ calibration of the uptake of pollutants using elimination kinetics of performance reference compounds and more accurate estimates of target analyte concentrations. A field study was conducted to test the sampler performance alongside spot sampling. A good agreement of contaminant patterns and water concentrations was obtained by the two sampling techniques.

Adsorption↗

PubMed2005

Indirect determination of low vapour pressures using solid-phase microextraction--application to tetrachlorobenzenes and tetrachlorobenzyltoluenes.

There is still a gap of reliable vapour pressure data at ambient temperature for low volatile organic substances due to the difficult and time-consuming determination using the classical methods. Static headspace extraction with a solid-phase microextraction (SPME) fibre in combination with gas chromatographic analysis provides an inexpensive tool for the indirect determination of low vapour pressures down to 10(-5) Pa. The procedure consists of two steps: (a) exposure of SPME fibre in the headspace above the test chemical over minutes to hours and (b) desorption and quantification of extracted amount. The calibration was performed using low volatile reference substances with well-known vapour pressures. A good correlation was found between substance uptakes of SPME fibre and vapour pressures. The method was applied, e.g. to tetrachlorobenzenes and to selected tetrachlorobenzyltoluenes with questionable vapour pressures. We obtained values between 0.98 and 13.5 Pa for the former and results between 0.13 and 0.68 mPa for the latter group of congeners. The scope of the method can be extended to substances with even lower vapour pressures, provided that reliable reference data are available.

Calibration↗

PubMed2005

Performance of semipermeable membrane devices for sampling of organic contaminants in groundwater.

Lipid-filled semipermeable membrane devices (SPMDs) are receiving increasing attention as passive, in situ samplers for the assessment of environmental pollutant exposure. Although SPMDs have been successfully used in a variety of field studies in surface waters, only a few studies have addressed their characteristics as groundwater samplers. In this study, the performance of the SPMDs for monitoring organic contaminants in groundwater was evaluated in a pilot field application in an area severely contaminated by chemical waste, especially by chlorinated hydrocarbons. The spatial distribution of hydrophobic groundwater contaminants was assessed using a combination of passive sampling with SPMDs and non-target semiquantitative GC-MS analysis. More than 100 contaminants were identified and semiquantitatively determined in SPMD samples. Along the 6 field sites under investigation, a large concentration gradient was observed, which confirms a very limited mobility of hydrophobic substances in dissolved form in the aquifer. The in situ extraction potential of the SPMD is limited by groundwater flow, when the exchange volume of well water during an exposure is lower than the SPMD clearance volume for the analytes. This study demonstrates that SPMDs present a useful tool for sampling and analyzing of groundwater polluted with complex mixtures of hydrophobic chemicals and provides guidance for further development of passive sampling technology for groundwater.

Environmental Monitoring↗

PubMed2005

Influence of food limitation on the effects of fenvalerate pulse exposure on the life history and population growth rate of Daphnia magna.

Laboratory ecotoxicity tests may not adequately evaluate the effects of pesticides, because they often do not include more environmentally relevant conditions, such as pulsed toxicant exposures and low food conditions. Therefore, we tested the effects of a pulse of the pyrethroid insecticide fenvalerate (FV) on the life history and population growth rate (r) of the cladoceran Daphnia magna. The daphnids were subjected to a 24-h pesticide pulse exposure (0.03, 0.1, 0.3, 0.6, 1.0, and 3.2 microg/L) under high and low food conditions and were monitored for 21 d. Chemical analysis showed that at t = 1 h, the nominal FV concentrations were reduced by 50 to 66%. Fenvalerate decreased survival and growth in the week following pulse exposure. Age at first reproduction increased, with consequent adverse effects on cumulative reproduction per living female and, therefore, on r. Thus, a short-term exposure of FV caused a long-term reduction on r as a result of increased mortality and a delay in development. Low food conditions exacerbated the effects of the FV exposure on juvenile survival and growth during the first week. This caused a much stronger reduction in r under low food conditions. We concluded that a pulsed FV exposure may result in long-term reduction of r that can be predicted only with more environmentally relevant toxicity tests, as described in the present study.

Animals↗

PubMed2003

Slow-stirring method for determining the n-octanol/water partition coefficient (Pow) for highly hydrophobic chemicals: performance evaluation in a ring test.

The n-octanol/water partition coefficient (Pow) is one of the most important parameters employed for estimating a chemical's environmental fate and toxicity. The currently adopted test guidelines for its determination do not allow for reliable determination of log Pow greater than 5. The slow-stirring experiment, in contrast, has been demonstrated to provide reliable log Pow data up to log Pow of 8.3. To validate this method and to obtain its approval as an official Organization for Economic Cooperation and Development (Paris, France) test guideline, a ring test was performed to evaluate the accuracy and precision of the slow-stirring experiment for determination of log Pow, particularly for highly hydrophobic compounds. Up to 15 volunteer laboratories tested 1,2,3,4-tetrachlorobenzene, hexachlorobenzene. 2,2',3,3',5,5',6,6'-octachlorobiphenyl, and decachlorobiphenyl (4.5 < log Pow < 8.2). The ring-test results for the respective chemicals were 4.62, 5.50, 7.39, and 8.18. The results deviated by less than 0.1 log Pow units from the reference log Pow. In addition, the relative standard deviations of log Pow were less than 2%. Using the protocol of the ring test, log Pow of p,p'-DDT was determined to be 6.24 +/- 0.05 (mean +/- standard deviation). In combination, these results indicate that the slow-stirring method is precise and accurate and, thus, allows for reliable determination of log Pow of highly hydrophobic chemicals.

Evaluation Studies as Topic↗

PubMed2002

Effects of heavy metal contamination of soils on micronucleus induction in Tradescantia and on microbial enzyme activities: a comparative investigation.

The aim of this study was to investigate correlation between genotoxic effects and changes of microbial parameters caused by metal contamination in soils. In total, 20 soils from nine locations were examined; metal contents and physicochemical soil parameters were measured with standard methods. In general, a pronounced induction of the frequency of micronuclei (MN) in the Tradescantia micronucleus (Trad-MN) assay was seen with increasing metal concentration in soils from identical locations. However, no correlations were found between metal contents and genotoxicity of soils from different locations. These discrepancies are probably due to differences of the physicochemical characteristics of the samples. Also, the microbial parameters depended on the metal content in soils from identical sampling locations. Inconsistent responses of the individual enzymes were seen in soils from different locations, indicating that it is not possible to define a specific marker enzyme for metal contamination. The most sensitive microbial parameters were dehydrogenase and arylsulfatase activity, biomass C, and biomass N. Statistical analyses showed an overall correlation between genotoxicity in Tradescantia on the one hand and dehydrogenase activity, biomass C, and the metabolic quotient on the other hand. In conclusion, the results of the present study show that the Trad-MN assay is suitable for the detection of genotoxic effects of metal contamination in soils and furthermore, that the DNA-damaging potential of soils from different origin cannot be predicted on the basis of chemical analyses of their metal concentrations.

Arylsulfatases↗