Biomedical subjects

Alekha K Dash

Publications and source records attributed to Alekha K Dash.

10 recordsLinked to original sources

PubMed2006

Development and validation of a sensitive liquid chromatographic method for the analysis of a novel radioprotectant: ON 01210.Na.

ON 01210.Na is a chlorobenzylsulfone derivative with potential property to mitigate the effects of accidental or intentional exposure to life threatening levels of radiation. A simple and sensitive HPLC method was developed and validated for the assay of ON 01210.Na. The isocratic system used a mobile phase consisting of acetonitrile:0.1% trifluroacetic acid in water (60:40, v/v) at a flow rate of 1 ml/min. The method used a C-18 Gemini column (250 mm x 4.6 mm) with column effluents monitored at 254 nm. Forced degradation of the drug was achieved by autoclaving ON 01210.Na with 0.05 N HCl, 0.05 N NaOH or 1.5% (v/v) hydrogen peroxide. The assay validation parameters evaluated include specificity, linearity, precision, accuracy and sensitivity. The retention time of the drug and the other effluents were well within 7 min. Standard curves were linear over the concentration range of 10-500 microg/ml. The R.S.D. values for the within-day and day-to-day precision ranged from 0.4 to 2.5 and 2.2 to 4.4%, respectively. The R.S.D. for accuracy measurement ranged from 0.85 to 1.7%. The critical level, the detection level and the determination level for this assay were 2.86+/-0.67, 5.69+/-0.67 and 15.6+/-1.8 microg/ml, respectively. A simple, sensitive and stability indicating HPLC assay was developed and validated for the analysis of a novel radioprotectant. This method was used to evaluate the aqueous as well as solid-state stability of this drug during autoclaving.

Acetonitriles↗

PubMed2006

A mucoadhesive in situ gel delivery system for paclitaxel.

MUC1 gene encodes a transmembrane mucin glycoprotein that is overexpressed in human breast cancer and colon cancer. The objective of this study was to develop an in situ gel delivery system containing paclitaxel (PTX) and mucoadhesives for sustained and targeted delivery of anticancer drugs. The delivery system consisted of chitosan and glyceryl monooleate (GMO) in 0.33M citric acid containing PTX. The in vitro release of PTX from the gel was performed in presence and absence of Tween 80 at drug loads of 0.18%, 0.30%, and 0.54% (wt/wt), in Sorensen's phosphate buffer (pH 7.4) at 37 degrees C. Different mucin-producing cell lines (Calu-3>Caco-2) were selected for PTX transport studies. Transport of PTX from solution and gel delivery system was performed in side by side diffusion chambers from apical to basal (A-B) and basal to apical (B-A) directions. In vitro release studies revealed that within 4 hours, only 7.61% +/- 0.19%, 12.0% +/- 0.98%, 31.7% +/- 0.40% of PTX were released from 0.18%, 0.30%, and 0.54% drug-loaded gel formulation, respectively, in absence of Tween 80. However, in presence of surfactant (0.05% wt/vol) in the dissolution medium, percentages of PTX released were 28.1% +/- 4.35%, 44.2% +/- 6.35%, and 97.1% +/- 1.22%, respectively. Paclitaxel has shown a polarized transport in all the cell monolayers with B-A transport 2 to 4 times higher than in the A-B direction. The highest mucin-producing cell line (Calu-3) has shown the lowest percentage of PTX transport from gels as compared with Caco-2 cells. Transport of PTX from mucoadhesive gels was shown to be influenced by the mucin-producing capability of cell.

Antineoplastic Agents, Phytogenic↗

PubMed2004

A novel in situ gel for sustained drug delivery and targeting.

The objective of this study was to develop a novel chitosan-glyceryl monooleate (GMO) in situ gel system for sustained drug delivery and targeting. The delivery system consisted of 3% (w/v) chitosan and 3% (w/v) GMO in 0.33M citric acid. In situ gel was formed at a biological pH. In vitro release studies were conducted in Sorensen's phosphate buffer (pH 7.4) and drugs were analyzed either by HPLC or spectrophotometry. Characterization of the gel included the effect of cross-linker, determination of diffusion coefficient and water uptake by thermogravimetric analysis (TGA). Mucoadhesive property of the gel was evaluated in vitro using an EZ-Tester. Incorporation of a cross-linker (glutaraldehyde) retarded the rate and extent of drug release. The in vitro release can further be sustained by replacing the free drug with drug-encapsulated microspheres. Drug release from the gel followed a matrix diffusion controlled mechanism. Inclusion of GMO enhanced the mucoadhesive property of chitosan by three- to sevenfold. This novel in situ gel system can be useful in the sustained delivery of drugs via oral as well as parenteral routes.

Anesthetics, Local↗

PubMed2003

Separation methods that are capable of revealing blood-brain barrier permeability.

The objective of this review is to emphasize the application of separation science in evaluating the blood-brain barrier (BBB) permeability to drugs and bioactive agents. Several techniques have been utilized to quantitate the BBB permeability. These methods can be classified into two major categories: in vitro or in vivo. The in vivo methods used include brain homogenization, cerebrospinal fluid (CSF) sampling, voltametry, autoradiography, nuclear magnetic resonance (NMR) spectroscopy, positron emission tomography (PET), intracerebral microdialysis, and brain uptake index (BUI) determination. The in vitro methods include tissue culture and immobilized artificial membrane (IAM) technology. Separation methods have always played an important role as adjunct methods to the methods outlined above for the quantitation of BBB permeability and have been utilized the most with brain homogenization, in situ brain perfusion, CSF sampling, intracerebral microdialysis, in vitro tissue culture and IAM chromatography. However, the literature published to date indicates that the separation method has been used the most in conjunction with intracerebral microdialysis and CSF sampling methods. The major advantages of microdialysis sampling in BBB permeability studies is the possibility of online separation and quantitation as well as the need for only a small sample volume for such an analysis. Separation methods are preferred over non-separation methods in BBB permeability evaluation for two main reasons. First, when the selectivity of a determination method is insufficient, interfering substances must be separated from the analyte of interest prior to determination. Secondly, when large number of analytes is to be detected and quantitated by a single analytical procedure, the mixture must be separated to each individual component prior to determination. Chiral separation in particular can be essential to evaluate the stereo-selective permeation and distribution of agents into the brain. In conclusion, the usefulness of separation methods during BBB permeability evaluation is immense and more application of these methods is foreseen in the future.

Blood-Brain Barrier↗

PubMed2003

A simple HPLC method with pulsed EC detection for the analysis of creatine.

The objective of this study was to develop a simple and sensitive LC method for the determination of creatine in aqueous solutions as well as in rat plasma using electrochemical detection. The chromatographic system consisted of a GP50 gradient pump, an ED40 pulsed electrochemical detector, and an AI-450 chromatography automation system (Dionex). The mobile phase consisted of a mixture of water, acetonitrile, 0.01 M sodium acetate, and 1.0 M sodium hydroxide (2.5:2.5:90:5, V/V/V/V) at a flow rate of 1.0 ml/min. The chromatographic separation was achieved at 45 degrees C on a column with a polyhydroxylated glucose and sulfonated stationary phase. The retention times of creatine and creatinine was 3.50 and 4.73 min, respectively, with creatine fully resolved from its major degradation product, creatinine. The standard curves were linear over the concentration range of 0-20 microg/ml. Within-day and day-to-day relative standard deviations (R.S.D.) were less than 10%. This method was used to study dissolution characteristics of various creatine salts in water.

Animals↗

PubMed2003

Evaluation of the stability of creatine in solution prepared from effervescent creatine formulations.

The objectives of this study were to determine the cause of the crystallization in a large volume creatine supplement solution made from effervescent powders containing di-creatine citrate, and to characterize these crystals using thermal analyses and x-ray diffractometry. Creatine effervescent powders were dissolved in deionized water (pH 6.2) and stored both at room temperature (RT) (25 degrees C) and refrigerated condition (4 degrees C) over a period of 45 days. Creatine concentration was determined using high-performance liquid chromatography (HPLC). Intrinsic dissolution and saturated solubility of creatine, creatine monohydrate, and di-creatine citrate in water were determined and compared. Crystal growth was detected only in the refrigerated samples on the seventh day of storage. Differential Scanning Calorimetry (DSC) and x-ray diffraction (XRD) studies revealed that the crystals formed were of creatine monohydrate. Ninety percent creatine degradation was observed within 45 days for RT samples. However, at refrigerated condition this degradation was 80% within the same time period. The pH of the RT samples also increased from 3.6 to 4.5 during storage. No such increase was observed in the case of refrigerated samples. The intrinsic dissolution rate constants of the compounds decreased in the following order: di-creatine citrate > creatine > creatine monohydrate. In conclusion, di-creatine citrate used in effervescent formulation dissociates to creatine in aqueous solution and eventually crystallizes out as creatine monohydrate. Significant decrease in solubility and effect of pH contribute to this crystallization process.

Chemical Phenomena↗

PubMed2002

A simple LC method with UV detection for the analysis of creatine and creatinine and its application to several creatine formulations.

The objective of this study was to develop a simple and sensitive LC method for the determination of creatine and creatinine in various creatine supplement formulations. The chromatographic system comprised of a LC-600 pump, SCL-6B system controller, and SPD-6AV detector (Shimadzu, Japan). The mobile phase consisted of 0.045 M ammonium sulfate in water. The chromatographic separation was achieved at ambient temperature on a Betabasic C-18 column (250 x 4.6 mm, Keystone Sci.). The flow rate was maintained at 0.75 ml/min and effluents are monitored at 205 nm. 4-(2-Aminoethyl)benzene sulfonamide was used as an internal standard (IS). This method required less than 7 min of chromatographic time. The standard curves were linear over the concentration range of 1-100 microg/ml for creatine and 2-100 microg/ml for creatinine, respectively. The relative standard deviations (RSD) for the within-day and day-to-day precision for creatine were within 1.0-4.6 and 2.2-4.7%, respectively. The RSD for the accuracy of creatine assay was in the range of 2.4-4.7%. The RSD values for the within-day precision, day-to-day precision and accuracy for creatinine validation were 1.7-4.4, 2.3-5.4 and 2.4-4.8%, respectively. This method was used to determine: (i) the creatine concentration in various marketed products; (ii) saturated solubility of various creatine salts; and (iii) stability of creatine in aqueous solution. In conclusion, a simple and sensitive LC method with UV detection was developed for the simultaneous determination of creatine and creatinine in formulations. Di-creatine citrate salt showed a higher aqueous solubility (at 25 degrees C) as compared to creatine and creatine monohydrate. Some of the over-the-counter (OTC) products tested contained a very low level of creatine in contrast to their label claim. Substantial conversion of creatine into creatinine was noticed in liquid formulation.

Chromatography, High Pressure Liquid↗

PubMed2002

Evaluation of red cabbage dye as a potential natural color for pharmaceutical use.

Red cabbage dye is a natural pigment used mainly as a food color. A class of compounds called anthocyanins attributes to this color. The pH of the red cabbage solution can also affect both its color and intensity. The objective of this study was to determine the ionization constant (pK(a)) of red cabbage color, the effect of pH and temperature on its stability in solution and evaluation of this natural color as a pH indicator in pharmaceutical system. Spectrophotometric method was used to determine its pK(a). The lambda(max) and absorbencies of the red cabbage color at different concentrations and pH were determined. The analytical wavelength (AW) is the wavelength at which the greatest difference in absorbencies between ionized and molecular species occurs was determined. The absorbencies of red cabbage solution (0.12% w/v) at different pH values ranging from 5.0 to 8.0 (with increments of 0.2), was measured at the AW of 612 nm. The resulted absorbencies ranged from 0.31 to 1.91 and were used to determine its pK(a). The pK(a) determined by this method was within a range of 6.8-7.2. Results from this study demonstrated that red cabbage dye could be used as a pH indicator in pharmaceutical formulations. In acidic condition, it has its original red color but at a basic pH its color changes to deep blue. This color is more stable at a low temperature and pH. Its ability to act as a pH indicator was further tested using chlorbutol solution as a model system.

Anthocyanins↗

PubMed2002

Solid-state properties of creatine monohydrate.

Creatine monohydrate (CM) is a nutritional supplement and an ergogenic aid for athletes. It appears to increase lean body mass, high-intensity power output and strength in healthy humans. The crystal structure of creatine monohydrate has previously been reported. However, little information is available on its solid-state properties. In this investigation, creatine monohydrate was subjected to Thermal Analyses, Karl-Fisccher Titrimetry (KFT), Scanning Electron Microscopy (SEM), and Variable Temperature X-ray Powder Diffractometry (VTXRD) to characterize its solid-state properties. The results of this study suggested that commercially available creatine monohydrate dehydrates at about 97-125 degrees C. A phase transition after dehydration was confirmed by X-ray diffraction studies. This dehydrated phase at a temperature above 230 degrees C undergoes intramolecular cyclization with a loss of an additional mole of water to form creatinine. Creatinine finally melts with decomposition at about 290 degrees C. VTXRD, confirmed that the above solid-state thermal transformation was kinetically driven, and occurred within a narrow temperature range. Mass Spectrometric (MS) studies further indicated a possible dimerization of creatinine formed during the solid-state transformation.

Chemical Phenomena↗

PubMed2002

Synthesis and characterization of hydroxyapatite-ciprofloxacin delivery systems by precipitation and spray drying technique.

This investigation synthesized and characterized hydroxyapatite (HAP) microspheres, agglomerated microspheres, and implants containing ciprofloxacin. This delivery system is to be used as an implantable drug delivery system for the treatment of bone infections. The HAP microspheres were made by chemical precipitation followed by a spray-drying technique. Agglomerated microspheres were prepared by a wet granulation process using a granulator. Implants were prepared by direct compression of the granules on a Carver press. Ciprofloxacin was analyzed by high-performance liquid chromatography. Characterization of the HAP microspheres include particle size, size distribution, physical state of the drug in the microsphere, and microstructure of the drug delivery system before and after in vitro release. The particle size, porosity, and morphology of the microspheres were dependent on viscosity and concentration of the slurry as well as the atomization pressure used during spray drying. Even at the highest drug load (2% wt/wt), the drug was present in a noncrystalline state. The drug release from the agglomerated microspheres was quick and almost complete within 1 hour. However, compressing the same amount of agglomerated microspheres into an implant greatly reduced the rate of ciprofloxacin release. Only 12% (wt/wt) of the drug was released from the implant within 1 hour. The in vitro release of ciprofloxacin from these implants follows a diffusion-controlled mechanism. This method provides a unique way of producing various shapes and drug loads of HAP microspheres that can be easily manufactured on a commercial scale.

Bone Diseases, Infectious↗