Ultralarge and thermally stable electro-optic activities from supramolecular self-assembled molecular glasses.
Explore the source record for details and available documents.
Journal Article↗
Biomedical subjects
Alex K-Y Jen
Publications and source records attributed to Alex K-Y Jen.
Patterning of robust self-assembled n-type hexaazatrinaphthylene-based nanorods and nanowires by microcontact printing.
The one-dimensional (1-D) self-assembly property of an n-type hexaazatrinaphthylene (HATNA) discotic pi-conjugated molecule was studied. Structurally robust unimolecular columnar stacks of HATNA with tunable length have been fabricated through a combination of supramolecular self-assembly and post-polymerization approach. Moreover, microcontact printing can be utilized to transfer the self-assembled nanostructures to the surface to create desired functional patterns.
Journal Article↗
Arrays of covalently bonded single gold nanoparticles on thiolated molecular assemblies.
A simple approach to form arrays of covalently bonded single gold nanoparticles (AuNPs) is demonstrated. Asymmetric molecular assemblies composed of two layers of rigid aromatic molecules with different structures, arranged in hexagonal arrays on a template produced by edge-spreading lithography, are used to guide the assembly of AuNPs. Arrays of single AuNPs are achieved by taking advantage of the interplay of electrostatic interactions and covalent bonding in conjunction with the positional constraint on the template. Schiff base chemistry is highlighted in the surface chemical reaction to selectively modify nanoscale surface features with high yield.
Journal Article↗
Two-dimensional self-assembly of 1-pyrylphosphonic acid: transfer of stacks on structured surface.
Strong hydrogen bonding and pi-pi stacking between 1-pyrylphosphonic acid (PYPA) molecules were exploited to create self-assembled two-dimensional supramolecular structures. Polycrystalline films of these laminate crystalline PYPA bilayers were easily deposited onto the solid supports through a simple spin-coating technique. Atomic force microscopy (AFM), scanning tunneling microscopy (STM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), UV-vis absorption, and fluorescence spectroscopy reveal that processing parameters, such as solvent, concentration, and surface of the substrate, are critical factors in determining the final morphology of the stacked film. Robust laminate structures could be obtained only when short alkyl chain protic solvents (methanol or ethanol) and a nonhydrophobic substrate surface were used. Polycrystalline films were formed through the nucleation and growth of PYPA molecules into laminate structures at the air/solvent interface before they land on the substrate during the spin-coating process. These films possess good mechanical properties and were easily transferred onto a SiO2/Si substrate that was patterned with Au electrodes without breaking their crystalline structures. The successful transfer of the laminate crystals allows us to probe their electrical properties through a field effect transistor device. A gating effect on the charge transport of the stacked films indicates that PYPA laminate crystal possesses p-typed semiconductor characteristics.
Hydrogen Bonding↗
High-efficiency polymer light-emitting diodes using neutral surfactant modified aluminum cathode.
High-efficiency polymer light-emitting diodes were fabricated by inserting a layer of nonionic neutral surfactant between the electroluminescent (EL) layer and the high-work-function aluminum cathode via spin coating. It was found that both the poly(ethylene glycol)- and poly(propylene glycol)-based surfactants as well as their copolymers can all demonstrate similar performance enhancement. Device performances comparable to or even better than those of the control devices using calcium as the cathode have been achieved for both poly(p-phenylene)-based and polyfluorene-based conjugated polymers with orange-red, green, and blue emission colors. It is possible that when both surfactant and aluminum are used as the cathode, the abundant hole injection through a hole-transporting layer and hole pile-up at the inner side of the EL/surfactant interface might cause an effective electric field to induce the realignment of the dipole moment of those polar surfactant molecules, thus lowering the barrier for electron injection. In addition, the coordination between the aluminum and oxygen atoms on the surfactant might cause n-type doping in the areas near surfactant in the EL polymer layer that causes the enhancement of electron injection.
Journal Article↗
Facile synthesis of highly efficient phenyltetraene-based nonlinear optical chromophores for electrooptics.
[reaction: see text] A facile synthetic route has been developed to convert an electron-rich, sterically hindered dialkylaminodienone into a conjugated dialkylaminotrienal with good yield. The derived dialkylaminotetraene-type nonlinear optical chromophores possess an all-trans conformation and can be functionalized with fluoro-dendron to provide proper shape modification for poling. Polymers doped with two examples of these chromophores in high concentrations have been poled to afford ultra-large electrooptic coefficients (r(33)) of 208 and 262 pm/V, respectively, at the measuring wavelength of 1.31 mum.
Journal Article↗
Self-assembled monolayers of aromatic thiols stabilized by parallel-displaced pi-pi stacking interactions.
Parallel-displaced pi-pi stacking interactions have been known to be the dominant force in stabilizing the double helical structure of DNA and the tertiary structure of proteins. However, little is known about their roles in self-assembled monolayers of other large pi molecules such as aromatic thiols. Here we report on a systematic study of the self-assembled monolayers of four kinds of anthracene-based thiols, 9-mercaptoanthracene (MA), (4-mercaptophenyl) (9-anthryl) acetylene (MPAA), (4-mercaptophenyl) (10-nitro-9-anthryl) acetylene (MPNAA), and (4-mercaptophenyl) (10-carboxyl-9-anthryl) acetylene (MPCAA) on Au(111), in which a spacer and different functional groups (NO2 and COOH) are intentionally designed to introduce and thus allow the investigation of various intermolecular interactions, in addition to pi-pi interactions in the base molecules. We find that all molecules form long-range-ordered monolayers and, more interestingly, that these assembled monolayers exhibit essentially the same fundamental packing structure. On the basis of high-resolution scanning tunneling microscopy observations, we propose the space-filling models for the observed superstructures and demonstrate that all superstructures can be understood in terms of the parallel-displaced pi-pi stacking interactions, despite the presence of competing dipole-dipole and H-bonding interactions associated with these specially designed functional groups.
Journal Article↗
Linear and nonlinear optical properties of a macrocyclic trichromophore bundle with parallel-aligned dipole moments.
A macrocyclic trichromophore bundle 1 with parallel-aligned dipole moments has been synthesized to study the influence of aggregation and orientation of a nonlinear optical (NLO) chromophore on its optical properties. The linear and nonlinear optical properties of 1 and a single chromophore standard 2 have been studied by UV-vis absorption, fluorescence, solvatochromic spectrometry, and hyper-Rayleigh scattering (HRS). Reduced first-order hyperpolarizability beta, hypsochromic shift, enhanced solvatochromic shifts, and fluorescence quenching for individual chromophores were observed when 1 was compared with 2. Analysis of the data showed that the transition dipole moment changes only slightly when the chromophores are parallel aligned in the bundle architecture. However, the apparent hyperpolarizability of the individual chromophores decreased significantly by about 20%. The reduction in beta for the individual chromophores in 1 is largely due to the hypsochromic shift, i.e., excitation energy increase of the interband (charge-transfer) energy gap and the reduced difference between the ground-state and excited-state dipole moments. The hypsochromic shift and fluorescence quenching are consistent with exciton theory. Possible reasons for the enhanced solvatochromic shift are discussed.
Journal Article↗
Efficient CdSe/CdS quantum dot light-emitting diodes using a thermally polymerized hole transport layer.
We report multilayer nanocrystal quantum dot light-emitting diodes (QD-LEDs) fabricated by spin-coating a monolayer of colloidal CdSe/CdS nanocrystals on top of thermally polymerized solvent-resistant hole-transport layers (HTLs). We obtain high-quality QD layers of controlled thickness (down to submonolayer) simply by spin-coating QD solutions directly onto the HTL. The resulting QD-LEDs exhibit narrow ( approximately 30 nm, fwhm) electroluminescence from the QDs with virtually no emission from the organic matrix at any voltage. Using multiple spin-on HTLs improves the external quantum efficiency of the QD-LEDs to approximately 0.8% at a brightness of 100 cd/m(2) (with a maximum brightness over 1,000 cd/m(2)). We conclude that QD-LEDs could be made more efficient by further optimization of the organic semiconductors.
Journal Article↗
Highly efficient red-electrophosphorescent devices based on polyfluorene copolymers containing charge-transporting pendant units.
We have systematically examined the photoluminescence (PL) and electroluminescence (EL) behavior of blends comprising two efficient red phosphors doped, respectively, into the blue-emitting polyfluorene derivatives PF-TPA-OXD and PF-OXD. The host polymers, which contain both hole- and electron-transporting or merely electron-transporting side chains, are capable of facilitating charge injection and transport. After determining the HOMO and LUMO energy levels of these materials, we were able to match the dopant with its most suitable host to achieve the direct formation and confinement of an exciton at the dopant. This configuration also leads to a reduction in the electrical excitation of the host polymer, which in turn decreases the degree of exciton loss arising from nonradiative decay of the host triplet. Using this approach, we were able to realize the production of high-performance red-electrophosphorescent devices. For Os(fppz)-doped devices, we obtain a balanced charge recombination in conjunction with higher current and luminance when using PF-TPA-OXD as the host matrix; this device reached a maximum external quantum efficiency of 8.37% with a peak brightness of 16 720 cd/m2. The absence of charge-transporting pendant units, i.e., the device fabricated from poly[9,9-dioctylfluorene-2,7-diyl] (POF), led, however, to relatively poor electroluminescence characteristics (5.81% and 2144 cd/m2).
Journal Article↗
Systematic study of the structure-property relationship of a series of ferrocenyl nonlinear optical chromophores.
A series of novel nonlinear optical (NLO) chromophores 1-4 incorporating the ferrocenyl (Fc) group as an electron donor and 2-dicyanomethylene-3-cyano-4-methyl-2,5-dihydrofuran (TCF) derivatives as electron acceptors are presented. The use of a constant Fc donor and varied acceptors and bridges makes it possible to systematically determine the contribution of the conjugated bridge and the acceptor strength to chromophore nonlinear optical activity. The X-ray crystal structures of all four chromophores allow for the systematic investigation of the structure-property relationship for this class of molecules. For example, the crystal structures reveal that both cyclopentadienyl groups in the ferrocenyl donor contribute to the electron donating ability. The first-order hyperpolarizabilities beta of these chromophores, measured by hyper-Rayleigh scattering (HRS) relative to p-nitroaniline are reported. These beta values are compared to those calculated by density functional theory (DFT). The excellent agreement between the theoretical and experimental beta values demonstrates that a linear relation exists between the hyperpolarizability and the bond length alternation. An electrooptic coefficient, r(33), of approximately 25 pm/V at 1300 nm, for compound 4, incorporated into a polymer matrix, is competitive with organic chromophores. Moreover, this r(33) is more than 30 times larger than the previously reported value for an organometallic chromophore in a poled polymer matrix. This work not only underscores the potential for Fc donor moieties, which have been underutilized, but also demonstrates that experimental characterization and theoretical simulations are now congruent, viable methods for assessing potential performance of NLO materials.
Journal Article↗
A highly electroluminescent molecular square.
Chiral molecular triangles and squares containing the Pt(diimine) metallocorners were synthesized and characterized, and used as the triplet MLCT luminophore in highly efficient light-emitting devices.
Journal Article↗
Assembly of gold nanoparticles using genetically engineered polypeptides.
Explore the source record for details and available documents.
Biomimetics↗
One-, two-, and three-photon absorption induced fluorescence of a novel chromophore in chloroform solution.
One-, two-, and three-photon absorption induced fluorescence intensities of a novel nonlinear optical chromophore have been measured by using a tunable femtosecond pulsed laser as the excitation. Four resonance peaks are observed as the excitation wavelength is tuned from 600 to 2000 nm. These peaks correspond to the one-, two- and three-photon fluorescence resonance. Except for intensity difference, the lifetime and the fluorescence spectrum are found to be the same for the one-, two-, or three-photon resonance, hence suggesting that the same excited energy level is involved in emitting the fluorescence intensity. A three-level model is developed to account for the incident excitation laser intensity dependence of the one-photon and multiphoton fluorescence intensity. The model allows the multiphoton absorption cross sections to be extracted; it can also account for the deviation observed in the linear, square, and cubic intensity dependence of the one-, two-, and three-photon fluorescence intensity, respectively. To determine the absorption cross sections, the present method does not require the fluorescence quantum efficiency data, needed in the low intensity technique.
Journal Article↗
Ordered self-assembly and electronic behavior of C60-anthrylphenylacetylene hybrid.
Explore the source record for details and available documents.
Journal Article↗
Molecular biomimetics: nanotechnology through biology.
Proteins, through their unique and specific interactions with other macromolecules and inorganics, control structures and functions of all biological hard and soft tissues in organisms. Molecular biomimetics is an emerging field in which hybrid technologies are developed by using the tools of molecular biology and nanotechnology. Taking lessons from biology, polypeptides can now be genetically engineered to specifically bind to selected inorganic compounds for applications in nano- and biotechnology. This review discusses combinatorial biological protocols, that is, bacterial cell surface and phage-display technologies, in the selection of short sequences that have affinity to (noble) metals, semiconducting oxides and other technological compounds. These genetically engineered proteins for inorganics (GEPIs) can be used in the assembly of functional nanostructures. Based on the three fundamental principles of molecular recognition, self-assembly and DNA manipulation, we highlight successful uses of GEPI in nanotechnology.
Amino Acid Sequence↗
Divalent osmium complexes: synthesis, characterization, strong red phosphorescence, and electrophosphorescence.
We report new divalent osmium complexes that feature strong red metal-to-ligand-charge-transfer (MLCT) phosphorescence and electrophosphorescence. The general formula of the complexes is Os(II)(N-N)(2)L-L, where N-N is either a bipyridine or a phenanthroline and L-L is either a phosphine or an arsine. New polypyridyl ligands synthesized are 4,4'-di(biphenyl)-2,2'-bipyridine (15) and 4,4'-di(diphenyl ether)-2,2'-bipyridine (16), and the 1,10-phenanthroline derivatives synthesized are 4,7-bis(p-methoxyphenyl)-1,10-phenanthroline (17), 4,7-bis(p-bromophenyl)-1,10-phenanthroline (18), 4,7-bis(4'-phenoxybiphen-4-yl)-1,10-phenanthroline (19), and 4,7-bis(4-naphth-2-ylphenyl)-1,10-phenanthroline (20). 4,4'-Diphenyl-2,2'-bipyridine (21) and 4,7-diphenyl-1,10-phenanthroline (22) were also used in these studies. Strong pi-acid ligands used were 1,2-bis(diphenylarseno)ethane (23), cis-1,2-bis(diphenylphosphino)ethylene (24), and cis-1,2-vinylenebis(diphenylarsine) (25). Ligand 25 is used for the first time in these types of luminescent osmium complexes. These compounds feature strong MLCT absorption bands in the visible region and strong red phosphorescent emission ranging from 611 to 651 nm, with quantum efficiency up to 45% in ethanol solution at room temperature. Red organic light-emitting diodes (OLEDs) were successfully fabricated by doping the Os(II) complexes into blend of poly(N-vinylcarbazole) (PVK) and 2-tert-butylphenyl-5-biphenyl-1,3,4-oxadiazole (PBD). Brightness over 1400 cd/m(2) for a double-layer device has been reached, with a turn-on voltage of 8 V. The maximum external quantum efficiency was 0.64%. Commission Internationale de l'Eclairage (CIE) chromaticity coordinates (x, y) of the red electrophosphorescence from the complexes are (0.65, 0.34), which indicates pure red emission.
Journal Article↗