Biomedical subjects

Alexander G Robling

Publications and source records attributed to Alexander G Robling.

17 recordsLinked to original sources

PubMed2006

Hyperactivation of p21ras and PI3K cooperate to alter murine and human neurofibromatosis type 1-haploinsufficient osteoclast functions.

Individuals with neurofibromatosis type 1 (NF1) have a high incidence of osteoporosis and osteopenia. However, understanding of the cellular and molecular basis of these sequelae is incomplete. Osteoclasts are specialized myeloid cells that are the principal bone-resorbing cells of the skeleton. We found that Nf1(+/-) mice contain elevated numbers of multinucleated osteoclasts. Both osteoclasts and osteoclast progenitors from Nf1(+/-) mice were hyperresponsive to limiting concentrations of M-CSF and receptor activator of NF-kappaB ligand (RANKL) levels. M-CSF-stimulated p21(ras)-GTP and Akt phosphorylation was elevated in Nf1(+/-) osteoclasts associated with gains of function in survival, proliferation, migration, adhesion, and lytic activity. These gains of function are associated with more severe bone loss following ovariectomy as compared with that in syngeneic WT mice. Intercrossing Nf1(+/-) mice and mice deficient in class 1(A) PI3K (p85alpha) restored elevated PI3K activity and Nf1(+/-) osteoclast functions to WT levels. Furthermore, in vitro-differentiated osteoclasts from NF1 patients also displayed elevated Ras/PI3K activity and increased lytic activity analogous to those in murine Nf1(+/-) osteoclasts. Collectively, our results identify a what we believe to be a novel cellular and biochemical NF1-haploinsufficient phenotype in osteoclasts that has potential implications for the pathogenesis of NF1 bone disease.

Animals↗

PubMed2006

The Wnt co-receptor LRP5 is essential for skeletal mechanotransduction but not for the anabolic bone response to parathyroid hormone treatment.

The cell surface receptor, low-density lipoprotein receptor-related protein 5 (LRP5) is a key regulator of bone mass. Loss-of-function mutations in LRP5 cause the human skeletal disease osteoporosis-pseudoglioma syndrome, an autosomal recessive disorder characterized by severely reduced bone mass and strength. We investigated the role of LRP5 on bone strength using mice engineered with a loss-of-function mutation in the gene. We then tested whether the osteogenic response to mechanical loading was affected by the loss of Lrp5 signaling. Lrp5-null (Lrp5-/-) mice exhibited significantly lower bone mineral density and decreased strength. The osteogenic response to mechanical loading of the ulna was reduced by 88 to 99% in Lrp5-/- mice, yet osteoblast recruitment and/or activation at mechanically strained surfaces was normal. Subsequent experiments demonstrated an inability of Lrp5-/- osteoblasts to synthesize the bone matrix protein osteopontin after a mechanical stimulus. We then tested whether Lrp5-/- mice increased bone formation in response to intermittent parathyroid hormone (PTH), a known anabolic treatment. A 4-week course of intermittent PTH (40 microg/kg/day; 5 days/week) enhanced skeletal mass equally in Lrp5-/- and Lrp5+/+ mice, suggesting that the anabolic effects of PTH do not require Lrp5 signaling. We conclude that Lrp5 is critical for mechanotransduction in osteoblasts. Lrp5 is a mediator of mature osteoblast function following loading. Our data suggest an important component of the skeletal fragility phenotype in individuals affected with osteoporosis-pseudoglioma is inadequate processing of signals derived from mechanical stimulation and that PTH might be an effective treatment for improving bone mass in these patients.

Anabolic Agents↗

PubMed2006

HMGB1 expression and release by bone cells.

Immune and bone cells are functionally coupled by pro-inflammatory cytokine intercellular signaling networks common to both tissues and their crosstalk may contribute to the etiologies of some immune-associated bone pathologies. For example, the receptor activator of NF-kappaB ligand (RANKL)/osteoprotegerin (OPG)/receptor activator of NF-kappaB (RANK) signaling axis plays a critical role in dendritic cell (DC) function as well as bone remodeling. The expression of RANKL by immune cells may contribute to bone loss in periodontitis, arthritis, and multiple myeloma. A recent discovery reveals that DCs release the chromatin protein high mobility group box 1 (HMGB1) as a potent immunomodulatory cytokine mediating the interaction between DCs and T-cells, via HMGB1 binding to the membrane receptor for advanced glycation end products (RAGE). To determine whether osteoblasts or osteoclasts express and/or release HMGB1 into the bone microenvironment, we analyzed tissue, cells, and culture media for the presence of this molecule. Our immunohistochemical and immunocytochemical analyses demonstrate HMGB1 expression in primary osteoblasts and osteoclasts and that both cells express RAGE. HMGB1 is recoverable in the media of primary osteoblast cultures and cultures of isolated osteoclast precursors and osteoclasts. Parathyroid hormone (PTH), a regulator of bone remodeling, attenuates HMGB1 release in cultures of primary osteoblasts and MC3T3-E1 osteoblast-like cells but augments this release in the rat osteosarcoma cell line UMR 106-01, both responses primarily via activation of adenylyl cyclase. PTH-induced HMGB1 discharge by UMR cells exhibits similar release kinetics as reported for activated macrophages. These data confirm the presence of the HMGB1/RAGE signaling axis in bone.

Alkaline Phosphatase↗

PubMed2006

Biomechanical and molecular regulation of bone remodeling.

Bone is a dynamic tissue that is constantly renewed. The cell populations that participate in this process--the osteoblasts and osteoclasts--are derived from different progenitor pools that are under distinct molecular control mechanisms. Together, these cells form temporary anatomical structures, called basic multicellular units, that execute bone remodeling. A number of stimuli affect bone turnover, including hormones, cytokines, and mechanical stimuli. All of these factors affect the amount and quality of the tissue produced. Mechanical loading is a particularly potent stimulus for bone cells, which improves bone strength and inhibits bone loss with age. Like other materials, bone accumulates damage from loading, but, unlike engineering materials, bone is capable of self-repair. The molecular mechanisms by which bone adapts to loading and repairs damage are starting to become clear. Many of these processes have implications for bone health, disease, and the feasibility of living in weightless environments (e.g., spaceflight).

Animals↗

PubMed2005

Dentin matrix protein 1 gene cis-regulation: use in osteocytes to characterize local responses to mechanical loading in vitro and in vivo.

Dentin matrix protein 1 (DMP1) is highly expressed in osteocytes and is mechanically responsive. To study osteocyte-specific and mechanically regulated DMP1 gene expression, the transcriptional activity of three cis-regulatory regions was first examined in an osteoblast differentiation model in vitro using a green fluorescent protein (GFP) reporter. Expression of the -9624 to +1996 bp (10 kb) and -7892 to +4439 bp (8 kb) DMP1 cis-regulatory regions dramatically increased in areas of mineralized matrix, in dendritic, osteocyte-like cells. Mineralizing cultures expressing the 8-kb construct show dramatic GFP increases in response to loading in cells with a dendritic morphology. Transgenic mice expressing the 8-kb DMP1-GFP and -2433 to +4439 bp (2.5 kb) DMP1-LacZ were generated. Osteocyte-specific expression was found with the 8 kb but not with the 2.5 kb in postnatal animals. However, the 2.5 kb could support expression in rapidly forming osteoblasts and pre-osteocytes in the embryo. Primary calvarial osteoblast cultures demonstrated that the 2.5 kb supports weak expression in a subset of osteoblasts and pre-osteocytes, but not in mature osteocytes. However, the 8 kb supports robust expression in primary bone marrow cultures. Therefore the region -7892 to -2433 bp, termed a 5.5-kb "Osteocyte Enhancer Module," appears to be required for osteocyte specificity. Ulnae of mice with the 8-kb DMP1-GFP were subjected to mechanical loading where GFP expression increased selectively and locally in osteocytes, distal to the mid-shaft and near the surface of the bone. Thus, the 8-kb region of the DMP1 gene is a target for mechanotransduction in osteocytes, and its cis-regulatory activity may be correlated to local strain in bone.

Animals↗

PubMed2005

Mechanisms by which exercise improves bone strength.

Certain exercises can induce osteogenesis and improve bone strength, yet the biological processes involved in bone mechanotransduction are only beginning to be understood. Several pathways are emerging from current research, including calcium signaling associated with membrane ion channels, adenosine triphosphate signaling, second messengers such as prostaglandins and nitric oxide, and signaling involving mitogen-activated protein kinase. One characteristic of the mechanosensing apparatus that has only recently been studied is the important role of desensitization. Experimental protocols that insert "rest" periods to reduce the effects of desensitization can double anabolic responses to mechanical loading. Exercises that reduce desensitization may provide an effective means to build bone strength.

Animals↗

PubMed2005

A comparison of mechanical properties derived from multiple skeletal sites in mice.

Laboratory mice provide a versatile experimental model for studies of skeletal biomechanics. In order to determine the strength of the mouse skeleton, mechanical testing has been performed on a variety of bones using several procedures. Because of differences in testing methods, the data from previous studies are not comparable. The purpose of this study was to determine which long bone provides the values closest to the published material properties of bone, while also providing reliable and reproducible results. To do this, the femur, humerus, third metatarsal, radius, and tibia of both the low bone mass C57BL/6H (B6) and high bone mass C3H/HeJ (C3H) mice were mechanically tested under three-point bending. The biomechanical tests showed significant differences between the bones and between mouse strains for the five bones tested (p < 0.05). Computational models of the femur, metatarsal, and radius were developed to visualize the types of measurement error inherent in the three-point bending tests. The models demonstrated that measurement error arose from local deformation at the loading point, shear deformation and ring-type deformation of the cylindrical cross-section. Increasing the aspect ratio (bone length/width) improved the measurement of Young's modulus of the bone for both mouse strains (p < 0.01). Bones with the highest aspect ratio and largest cortical thickness to radius ratio were better for bending tests since less measurement error was observed in the computational models. Of the bones tested, the radius was preferred for mechanical testing because of its high aspect ratio, minimal measurement error, and low variability.

Animals↗

PubMed2005

Cellular accommodation and the response of bone to mechanical loading.

Several mathematical rules by which bone adapts to mechanical loading have been proposed. Previous work focused mainly on negative feedback models, e.g., bone adapts to increased loading after a minimum strain effective (MES) threshold has been reached. The MES algorithm has numerous caveats, so we propose a different model, according to which bone adapts to changes in its mechanical environment based on the principle of cellular accommodation. With the new algorithm we presume that strain history is integrated into cellular memory so that the reference state for adaptation is constantly changing. To test this algorithm, an experiment was performed in which the ulnae of Sprague-Dawley rats were loaded in axial compression. The animals received loading for 15 weeks with progressively decreasing loads, increasing loads, or a constant load. The results showed the largest increases in geometry in the decreasing load group, followed by the constant load group. Bone formation rates (BFRs) were significantly greater in the decreasing load group during the first 2 weeks of the study as compared to all other groups (P<0.05). After the first few weeks of mechanical loading, the BFR in the loaded ulnae returned to the values of the nonloaded ulnae. These experimental results closely fit the predicted results of the cellular accommodation algorithm. After the initial weeks of loading, bone stopped responding so the degree of adaptation was proportional to the initial peak load magnitude.

Adaptation, Physiological↗

PubMed2005

Bone mass and strength: phenotypic and genetic relationship to alcohol preference in P/NP and HAD/LAD rats.

BACKGROUND: The association between moderate alcohol intake and elevated bone mineral density observed in several epidemiologic studies might result from common genetic pathway regulating both phenotypes. In this study, we determined whether there is a relationship between alcohol preference and high bone mass or strength and whether bone mass-regulating genes segregate during selective breeding of alcohol preferring rats. METHODS: Six different lines of male rats with high or low preference for alcohol consumption were used in this study. The high alcohol preference lines are alcohol-preferring (P), high-alcohol-drinking 1 (HAD1), and high-alcohol-drinking 2 (HAD2), and their corresponding low alcohol preference lines are alcohol-nonpreferring (NP), low-alcohol-drinking 1 (LAD1), and low-alcohol-drinking 2 (LAD2). Bone mass phenotypes were determined using dual energy x-ray absorptiometry (DXA), peripheral quantitative computed tomography (pQCT), and biomechanics in long bones and lumbar vertebrae from rats at 3 and 6 months of age. RESULTS: P rats had significantly higher bone mass and strength compared with NP rats, mainly due to higher cortical bone in long bones and lumbar vertebrae. HAD2 rats also had significantly higher bone mass compared with LAD2 rats, but mostly due to increased trabecular bone leading to increased strength only in lumbar vertebra. Conversely, HAD1 rats had significantly lower bone mass and strength compared with LAD1 rats in long bones. The vertebral bone mass and strength did not differ between HAD1 and LAD1 rats. CONCLUSIONS: This study demonstrated that preference for alcohol consumption had no consistent relationship with high bone mass or strength, as each alcohol-preferring rat line had their unique bone mass phenotypes. However, genes regulating bone mass and strength appear to segregate with alcohol preference genes in P and HAD rat lines, suggesting that alcohol preferring rat lines may be useful for identifying genes that regulate bone mass and structure.

Absorptiometry, Photon↗

PubMed2004

Mechanotransduction in bone does not require a functional cyclooxygenase-2 (COX-2) gene.

UNLABELLED: COX-2 is a key enzyme involved in the response of bone to loading. However, using mice with a null mutation of the COX-2 gene, we found that a functional COX-2 gene is not required for mechanotransduction. This paradoxical finding may have resulted, in part, from mechanically induced COX-1 activity. INTRODUCTION: Cyclooxygenase-2 (COX-2) is an important mediator in the response of bone to mechanical loading, with pharmacological inhibition of COX-2 effectively eliminating or reducing mechanically induced bone formation. In this study, we further investigated the role of COX-2 in skeletal mechanotransduction using a genetic approach. The aim was to compare the skeletal responsiveness of COX-2 homozygous mutant (COX-2(-/-)) and wildtype control (COX-2(+/+)) mice to investigate whether a functional COX-2 gene is necessary for mechanotransduction. MATERIALS AND METHODS: Adult female COX-2(+/+) and COX-2(-/-) mice on a C57BL/6x129/ola background were studied using the ulna axial loading model. The response to 2 days of loading for 120 cycles/day at 2 Hz was measured histomorphometrically. Phenotypic characterization of the femurs in these mice was also performed. In a separate group of animals, the expression of the remaining COX isozyme, COX-1, was assessed using real-time RT-PCR 4 h after one bout of 120 loading cycles. RESULTS: Null mutation of the COX-2 gene resulted in a consistent femoral phenotype of reduced bone mass, altered architecture, and inferior mechanical properties. Many of these differences were nullified after adjustment for body weight. Nevertheless, body weight-corrected values showed a consistent trend of reduced mechanical properties in COX-2(-/-) mice. Genotype did not influence the response to mechanical loading, with no histomorphometric differences being found between COX-2(+/+) and COX-2(-/-) mice. Real-time RT-PCR showed COX-2(-/-) mice to express significantly greater COX-1 expression in loaded ulnas than in loaded ulnas in COX-2(+/+) mice. There were no differences in COX-1 expression in nonloaded ulnas. CONCLUSIONS: A functional COX-2 gene was not found to be required for skeletal mechanotransduction. This is in contrast to previous pharmacological studies showing that COX-2 is critical to the response of bone to loading. Investigating a potential reason for the absence of a genotype difference in this study, we found that mice with a null mutation in the COX-2 gene possess inductive skeletal COX-1 expression.

Animals↗

PubMed2004

Inhibition of the serotonin (5-hydroxytryptamine) transporter reduces bone accrual during growth.

Selective serotonin-reuptake inhibitors (SSRIs) antagonize the serotonin (5-hydroxytryptamine) transporter (5-HTT), and are frequently prescribed to children and adolescents to treat depression. However, recent findings of functional serotonergic pathways in bone cells and preliminary clinical evidence demonstrating detrimental effects of SSRIs on bone growth have raised questions regarding the effects of these drugs on the growing skeleton. The current work investigated the impact of 5-HTT inhibition on the skeleton in: 1) mice with a null mutation in the gene encoding for the 5-HTT; and 2) growing mice treated with a SSRI. In both models, 5-HTT inhibition had significant detrimental effects on bone mineral accrual. 5-HTT null mutant mice had a consistent skeletal phenotype of reduced mass, altered architecture, and inferior mechanical properties, whereas bone mineral accrual was impaired in growing mice treated with a SSRI. These phenotypes resulted from a reduction in bone formation without an increase in bone resorption and were not influenced by effects on skeletal mechanosensitivity or serum biochemistries. These findings indicate a role for the 5-HTT in the regulation of bone accrual in the growing skeleton and point to a need for further research into the prescription of SSRIs to children and adolescents.

Animals↗

PubMed2004

Exercise as an anabolic stimulus for bone.

Mechanical loading provides an anabolic stimulus for bone. More importantly, the mechanosensing apparatus in bone directs osteogenesis to where it is most needed for improving bone strength. The biological processes involved in bone mechanotransduction are poorly understood and further investigation of the molecular mechanisms might uncover drug targets for osteoporosis. Several pathways are emerging from current research, including membrane ion channels, ATP signaling, and second messengers such as prostaglandins and nitric oxide. Some key molecular targets include the L-type calcium channel (alpha 1C isoform), a gadolinium-sensitive stretch-activated channel, P2Y(2) and P2X(7) purinergic receptors, EP(2) and EP(4) prostanoid receptors, and the parathyroid hormone receptor. One characteristic of the mechanosensing apparatus that has only recently been studied is the important role of desensitization. Experimental protocols that insert "rest" periods to reduce the effects of desensitization can double anabolic responses to mechanical loading. A drug therapy that suppresses desensitization pathways may provide an effective means to build bone strength.

Animals↗

PubMed2003

Designing exercise regimens to increase bone strength.

Exercise is a very effective way to strengthen bones, particularly during childhood and adolescence. A collection of studies from the clinic and laboratory have provided new insights into how bone building effects of exercise can be maximized. From the available data we have calculated an "osteogenic index" for exercises.

Aged↗

PubMed2002

Evidence for a skeletal mechanosensitivity gene on mouse chromosome 4.

Differences in skeletal mechanical adaptation between C3H/HeJ (C3H) and C57BL/6J (B6) mouse strains suggest that these mice can be used to elucidate the genes involved in mechanosensitivity regulation. The C3H and B6 skeletons also differ in bone size, and several quantitative trait loci (QTL) have been mapped for bone size. We hypothesized that genes controlling bone size (external diameter) might exert their effect by influencing mechanosensitivity. The hypothesis was tested by applying mechanical loads to the ulnae of the B6.C3H-4T (4T) congenic mouse strain, which is genetically 98.4% B6 and carries the C3H chromosome 4 (Chr. 4) QTL genomic DNA. Mechanical strain was measured at the midshaft ulna in separate calibration animals. 4T mice were significantly more responsive to mechanical stimulation than B6 control mice, as assessed by changes in bone geometry and fluorochrome-derived bone formation rates. Bone formation rates were also greater in the ulnae and femora of 6-wk-old 4T mice engaged in normal cage activity compared with age-matched B6 mice. Collectively, the results might explain why 4T mice have wider femora and ulnae than do B6 control mice and suggest that mouse Chr. 4 contains a genetic locus that modulates the mechanosensitivity of bone tissue.

Animals↗

PubMed2002

Shorter, more frequent mechanical loading sessions enhance bone mass.

PURPOSE: The beneficial effects of exercise on bone mass and strength can be attributed to the sensitivity of bone cells to mechanical stimuli. However, bone cells lose mechanosensitivity soon after they are stimulated. We investigated whether the osteogenic response to a simulated high-impact exercise program lasting 4 months could be enhanced by dividing the daily protocol into brief sessions of loading, separated by recovery periods. METHODS: The right forelimbs of adult rats were subjected to 360 load cycles x d(-1), 3 d x wk(-1), for 16 wk. On each loading day, one group received all 360 cycles in a single, uninterrupted bout (360 x 1); the other group received 4 bouts of 90 cycles/bout (90 x 4), with each bout separated by 3 h. After sacrifice, bone mineral content (BMC), and areal bone mineral density (aBMD) were measured in the loaded (right) and nonloaded control (left) ulnae using DXA. Volumetric BMD (vBMD) and cross-sectional area (CSA) were measured at midshaft and the olecranon by using pQCT. Maximum and minimum second moments of area (I(MAX) and I(MIN)) were measured from the midshaft tomographs. RESULTS: After 16 wk of loading, BMC, aBMD, vBMD, midshaft CSA, I(MAX), and I(MIN) were significantly greater in right (loaded) ulnae compared with left (nonloaded) ulnae in the two loaded groups. When the daily loading regimen was broken into four sessions per day (90x4), BMC, aBMD, midshaft CSA, and I(MIN) improved significantly over the loading schedule that applied the daily stimulus in a single, uninterrupted session (360x1). CONCLUSION: Human exercise programs aimed at maintaining or improving bone mass might achieve greater success if the daily exercise regime is broken down into smaller sessions separated by recovery periods.

Animals↗

PubMed2002

The effects of dynamic axial loading on the rat growth plate.

Longitudinal bone growth can be suppressed by compressive loading. In this study, we applied three different magnitudes (17, 8.5, and 4N) of compressive force to growing rat ulnas 10 minutes/day for 8 days and investigated the effects on the distal growth plate biology. Further, to investigate growth rate recovery after cessation of loading, we examined rats 7 days after the loading period. Longitudinal growth of the ulna was suppressed in a dose-dependent manner by applied compressive force. In the 17N group, the longitudinal mineralization rate (LMR) at the distal growth plate was suppressed completely by loading and did not recover. However, in the 8.5N and 4N groups, LMR suppression recovered in 1 week. In the 17N group, growth plate height and hypertrophic zone height were significantly greater than control; the number of hypertrophic chondrocytes was increased; and some traumatic changes such as cracks in the growth plate were found. In addition, 17N loading suppressed cartilage mineralization and capillary invasion beneath the growth plate, although the number of chondrocytes synthesizing vascular endothelial growth factor (VEGF) was increased. Our study shows longitudinal growth suppression caused by axial loading of the ulna, which is proportional to the magnitude of load. Only the largest load (17N) caused morphological changes in the distal growth plate cartilage. There was no association found between mineralization and type X collagen localization or capillary invasion and VEGF expression.

Animals↗

PubMed2002

Improved bone structure and strength after long-term mechanical loading is greatest if loading is separated into short bouts.

Mechanical loading presents a potent osteogenic stimulus to bone cells, but bone cells desensitize rapidly to mechanical stimulation. Resensitization must occur before the cells can transduce future mechanical signals effectively. Previous experiments show that mechanical loading protocols are more osteogenic if the load cycles are divided into several discrete bouts, separated by several hours, than if the cycles are applied in a single uninterrupted bout. We investigated the effect of discrete mechanical loading bouts on structure and biomechanical properties of the rat ulna after 16 weeks of loading. The right ulnas of 26 adult female rats were subjected to 360 load cycles/day, delivered in a haversine waveform at 17 N peak force, 3 days/week for 16 weeks. One-half of the animals (n = 13) were administered all 360 daily cycles in a single uninterrupted bout (360 x 1); the other half were administered 90 cycles four times per day (90 x 4), with 3 h between bouts. A nonloaded baseline control (BLC) group and an age-matched control (AMC) group (n = 9/group) were included in the experiment. The following measurements were collected after death: in situ mechanical strain at the ulna midshaft; ulnar length; maximum and minimum second moments of area (I(MAx) and I(MIN)) along the entire length of the ulnas (1-mm increments); and ultimate force, energy to failure, and stiffness of whole ulnas. Qualitative observations of bone morphology were made from whole bone images reconstructed from microcomputed tomography (microCT) slices. Loading according to the 360 x 1 and 90 x 4 schedules improved ultimate force by 64% and 87%, energy to failure by 94% and 165%, I(MAX) by 13% and 26% (in the middistal diaphysis), I(MIN) by 69% and 96% (in the middistal diaphysis), and reduced peak mechanical strain by 40% and 36%, respectively. The large increases in biomechanical properties occurred despite very low 5-12% gains in areal bone mineral density (aBMD) and bone mineral content (BMC). Mechanical loading is more effective in enhancing bone biomechanical and structural properties if the loads are applied in discrete bouts, separated by recovery periods (90 x 4 schedule), than if the loads are applied in a single session (360 x 1). Modest increases in aBMD and BMC can improve biomechanical properties substantially if the new bone formation is localized to the most biomechanically relevant sites, as occurs during load-induced bone formation.

Adaptation, Physiological↗