Biomedical subjects

Alexander L Shluger

Publications and source records attributed to Alexander L Shluger.

11 recordsLinked to original sources

PubMed2006

Probing electron transfer dynamics at MgO surfaces by Mg-atom desorption.

Ultraviolet excitation of high surface area MgO films using 4.7 eV femtosecond pulses results in neutral Mg-atom desorption with hyperthermal kinetic energies in the range 0.1-0.4 eV. The Mg-atom hyperthermal energies and power dependences are similar to those previously observed using nanosecond pulsed excitation. Femtosecond two-pulse correlation measurements reveal the existence of different dynamical paths for Mg-atom desorption. One mechanism displays a sub-150 fs time scale and involves the simultaneous or near-simultaneous transition of two electrons to a 3-coordinated Mg(2+) site. Other paths display picosecond time scales that we associate with dynamics following electron trapping at 3-coordinated Mg(2+) surface sites.

Adsorption↗

PubMed2006

Chemisorption of HCl to the MgO(001) surface: a DFT study.

We use plane wave and embedded cluster ab initio density functional calculations to study adsorption, dissociation and diffusion of the HCl molecule on the MgO(001) surface. The two methods yield comparable results for adsorption of an isolated HCl molecule and complement each other when considering charged species and coverage effects. We find dissociative chemisorption at a coverage smaller than 0.5 monolayer with a Cl(-) ion electrostatically coupled to the OH(-) ion at the surface oxygen site. The adsorption energy of the Cl(-)[dot dot dot](OH)(-) complex is 1.5 eV and the activation energy of Cl(-) diffusion away from OH(-) is 0.6 eV. There is no significant activation energy for rotation of Cl(-) around the adsorption site. At rising coverage, an increase in dipole-dipole repulsion between HCl molecules leads to a lowering of the adsorption energy per HCl and a change of binding towards hydrogen-bridge type as well as a lowering of the activation energy for Cl(-) diffusion. OH(-) formed in the surface due to HCl adsorption has a stretch frequency of 3,083 cm(-1) with Cl(-) associated and 3,648 cm(-1) with Cl(-) removed.

Journal Article↗

PubMed2006

Optical absorption and luminescence energies of F centers in CaO from ab initio embedded cluster calculations.

We calculated the optical absorption and luminescence energies of electrons trapped at oxygen vacancies in CaO using a consistent embedded cluster method which accounts for the long-range polarization effects and partial covalence of CaO. Optical absorption and luminescence energies of neutral (F center) and positively charged (F+ center) vacancies are calculated by means of time dependent density functional theory using the B3LYP exchange-correlation density functional. Our results demonstrate that using large basis sets to describe a diffuse nature of excited states, and properly accounting for long-range polarization induced by charged and excited defect states, is crucial for accurate predictions of optical excitation and luminescence energies of these defects.

Journal Article↗

PubMed2006

Interaction of organic molecules with the TiO2 (110) surface: ab inito calculations and classical force fields.

We have studied the adsorption of a number of organic molecules consisting of methyl, benzyl, and carboxylic groups on the rutile TiO2 (110) surface using both ab initio and atomistic simulation techniques. We have tested the applicability of a simple embedded cluster model to studying the adsorption of small organic molecules on the perfect rutile TiO2 (110) surface, and used this model to develop a classical force field for the interactions of a wide class of organic molecules consisting of these groups with the rutile TiO2 (110) surface. The force field accounts for physisorption and ionic bonding of organic molecules at the surface. It allows the reproduction of adsorption energies and of geometries of organic molecules on the rutile surface. It should be useful for studying diffusion of these molecules and their manipulation with use of AFM and STM tips.

Journal Article↗

PubMed2005

Hydride ion as a two-electron donor in a nanoporous crystalline semiconductor 12CaO.7Al2O3.

The 12CaO.7Al2O3 (C12A7) crystal with a nanoporous lattice framework exhibits high electrical conductivity with an activation energy of approximately 1.5 eV when equilibrated in a hydrogen atmosphere above approximately 800 degrees C. The high conductivity is preserved in a quenched state below approximately 600 degrees C with a reduced activation energy of approximately 0.8 eV. Such complex behavior in electrical conductivity is associated with incorporation of hydride ions (H-) in cages of the lattice framework. Electromotive force measurements reveal that the major carrier for the conductivity is electron with a small contribution by proton (H+), ruling out the possibility of direct intercage migration of the H- ion. A combination of these observations with the ab initio calculations leads to the conclusion that the electrons are thermally generated from the H- ion by the dissociation into two electrons and an proton, which is further converted to an OH- ion via reaction with an extraframework oxide ion (O2-). The energy difference between the initial (H- + O2-) and the final (2e- + OH-) states as evaluated by the theoretical calculation is as small as approximately 1 eV, which agrees well with an experimentally obtained enthalpy change, approximately 1.4 eV. Thus, internal equilibration between the extraframework hydrogen and the oxygen species is responsible for the thermal generation of the carrier electron. It is also suggested that the same conductive (2e- + OH-) state is reached by the photoirradiation of H- -containing C12A7. In this case the photoionization of H- forms an electron and an Ho atom, which then forms an OH- ion and another electron with thermal assistance. The persistence of photoinduced conductivity is explained by the slow kinetics of the reverse process at room temperature.

Journal Article↗

PubMed2005

Measuring site-specific cluster-surface bond formation.

Recent advances in dynamic force microscopy show that it is possible to measure the forces between atomically sharp tips and particular atomic positions on surfaces as a function of distance. However, on most ionic surfaces, the positive and negative ions can so far not be distinguished. In this paper, we use the CaF2(111) surface, where atomic resolution force microscopy has allowed identification of the positions of the Ca2+ and F- ions in the obtained images, to demonstrate that short-range interaction forces can be measured selectively above chemically identified surface sites. Combining experimental and theoretical results allows a quantification of the strength and distance dependence of the interaction of a tip-terminating cluster with particular surface ions and reveals details of cluster and surface relaxation. Further development of this approach will provide new insight into mechanisms of chemical bond formation between clusters, cluster deposition at surfaces, processes in adhesion and tribology, and single atom manipulation with the force microscope.

Journal Article↗

PubMed2005

Laser control of desorption through selective surface excitation.

We review recent developments in controlling photoinduced desorption processes of alkali halides. We focus primarily on hyperthermal desorption of halogen atoms and show that the yield, electronic state, and velocity distributions of desorbed atoms can be selected using tunable laser excitation. We demonstrate that the observed control is due to preferential excitation of surface excitons. This approach takes advantage of energetic differences between surface and bulk exciton states and probes the surface exciton directly. We demonstrate that desorption of these materials leads to controlled modification of their surface geometric and electronic structures. We then extend the exciton mechanism of desorption, developed for alkali halides, to metal oxide surfaces, in particular magnesium oxide. In addition, these results demonstrate that laser desorption can serve as a solid-state source of halogen and oxygen atoms, in well-defined electronic and velocity states, for studying chemical processes in the gas phase and at surfaces.

Journal Article↗

PubMed2005

Chemistry at corners and edges: generation and adsorption of H atoms on the surface of MgO nanocubes.

We used UV light to generate site-selective O- hole centers at three-coordinated corner oxygen sites on MgO nanocubes. These highly reactive O- radicals split H2 homolytically and, in the course of this reaction, become hydroxylated and produce hydrogen atoms. The hydrogen atoms adsorb predominantly at cube edges and dissociate into surface-trapped electrons and protons. We propose that the experimentally observed (H+)(e-) centers are formed adjacent to the hydroxyl groups generated in the homolytic splitting process and can be defined as (H+)3C...(e-)(H+)NC centers where 3C and NC refer to the coordination numbers of the corresponding hydroxylated oxygen sites. Our ab initio embedded cluster calculations reveal that the electronic properties of (H+)3C...(e-)(H+)4C centers situated along MgO nanocube edges are consistent with both the electron-paramagnetic-resonance signal parameters and the reported optical-absorption properties. The transformation of corner O- centers into the (H+)3C...(e-)(H+)NC-type centers prevents their recombination with electronic surface centers and, hence, significantly alters the electronic structure of MgO nanocubes by introducing shallow electron traps.

Journal Article↗

PubMed2004

Laser control of product electronic state: desorption from alkali halides.

We demonstrate laser control of the electronic product state distribution of photodesorbed halogen atoms from alkali halide crystals. Our general model of surface exciton desorption dynamics is developed into a simple method for laser control of the relative halogen atom spin-orbit laser desorption yield. By tuning the excitation laser photon energy in a narrow region of the absorption threshold, the yield of excited state chorine atoms, Cl(2P(1/2)), can be made to vary from near 0 to 80% for KCl and from near 0 to 50% for NaCl relative to the total yield of Cl atoms. We describe the physical properties necessary to obtain a high degree of product state control and the limitation induced when these requirements are not met. These results demonstrate that laser control can be applied to solid state surface reactions and provide strong support for surface exciton-based desorption models.

Journal Article↗

PubMed2003

Electron localization and a confined electron gas in nanoporous inorganic electrides.

The nanoporous main group oxide 12CaO.7Al(2)O3 (C12A7) can be transformed from a wide-gap insulator to an electride where electrons substitute anions in cages constituting a positive frame. Our ab initio calculations of the electronic structure of this novel material give a consistent explanation of its high conductivity and optical properties. They show that the electrons confined in the inert positive frame are localized in cages and undergo hopping between neighboring cages. The results are useful for the understanding of behavior of confined electron gas of different topology and electron-phonon coupling, and for designing new transparent conductors, electron emitters, and electrides.

Journal Article↗

PubMed2003

Paramagnetic defect centers at the MgO surface. An alternative model to oxygen vacancies.

On the basis of embedded cluster calculations, we propose a new model for the structure of paramagnetic color centers at the MgO surface usually denoted as F(S)(H)(+) (an electron trapped near an adsorbed proton). These centers are produced by exposing the surface of polycrystalline MgO to H(2) followed by UV irradiation. We demonstrate that properties of H atom absorbed at surface sites such as step edges (MgO(step)) and reverse corner sites (MgO(RC)), formed at the intersection of two step edges, are compatible with a number of features observed for F(S)(H)(+). Our calculations suggest that (i) H(2) dissociates at the reverse corner site heterolytically and that there is no barrier for this exothermic reaction; (ii) the calculated vibrations of the resulting MgO(RC)(H(+))(H(-)) complex are fully consistent with the measured ones; (iii) desorption of a neutral H atom from the diamagnetic precursor requires UV light and leads to the formation of stable neutral paramagnetic centers at the surface, MgO(step)(H(+))(e(-))(trapped) and MgO(RC)(H(+))(e(-))(trapped). The computed isotropic hyperfine coupling constants and optical transitions of these centers are in broad agreement with the existing experimental data. We argue that these centers, which do not belong to the class of "oxygen vacancies", are two of the many possible forms of the F(S)(H)(+) defect center.

Journal Article↗