Degradable polyelectrolyte capsules filled with oligonucleotide sequences.
Explore the source record for details and available documents.
Drug Carriers↗
Biomedical subjects
Alexander N Zelikin
Publications and source records attributed to Alexander N Zelikin.
Approaches to quantifying and visualizing polyelectrolyte multilayer film formation on particles.
Colloidal particles prepared by using the layer-by-layer technique are increasingly finding application in diagnostics, drug delivery, and sensing. Herein, we outline methods for applying three established techniques, confocal laser scanning microscopy (CLSM), flow cytometry, and differential interference contrast (DIC) microscopy, to characterize ultrathin films of poly(styrenesulfonate) (PSS) and poly(allylamine hydrochloride) (PAH) assembled on silica particles. Both CLSM and flow cytometry require the use of fluorescently labeled polyelectrolytes (PEs). The film homogeneity can be assessed using CLSM, while flow cytometry allows analysis at unparalleled speed (thousands of particles per second) with unprecedented sensitivity (<0.5 fg of adsorbed polymer) of polydispersed particles of different size ( approximately 300 nm to tens of micrometers). Using CLSM and flow cytometry measurements, in conjunction with quartz crystal microgravimetry measurements on planar supports, allows quantification of PSS/PAH layer buildup on the particles. Furthermore, flow cytometry and DIC microscopy were used to unequivocally distinguish between silica-core PSS/PAH-shell particles and hollow PSS/PAH capsules obtained following core removal. The techniques outlined here are not limited to measuring PE deposition on solid particles but, in principle, are equally applicable to quantifying the adsorption of other materials (such as DNA, proteins, or nanoparticles) on a variety of particulate systems, including hollow capsules, emulsions, and cells.
Journal Article↗
Disulfide cross-linked polymer capsules: en route to biodeconstructible systems.
Hydrogen-bonded multilayer thin films were constructed using poly(vinylpyrrolidone) and poly(methacrylic acid) functionalized with cysteamine. The resulting films included thiol moieties that were cross-linked to render the films stable at physiological pH. Film buildup was followed using quartz crystal microgravimetry, which was also used to demonstrate the improved stability imparted by reacting the thiol moieties to form disulfide bonds. Films without disulfide bonds were readily deconstructed at physiological pH, while those with disulfide bonds were swollen upon exposure to this pH (7) but remained intact. Addition of a common thiol-disulfide exchange reagent, dithiothreitol (DTT) at pH 7 led to disassembly of the multilayer films. The films were also prepared on colloidal substrates (as demonstrated using confocal microscopy) and were used to retain a model drug (fluorescently labeled transferrin) and release this molecule when triggered by the addition of DTT. This approach has potential for the in vivo applications of hollow capsules, as thiol-disulfide exchange leading to deconstruction of the capsules can occur with the assistance of intracellular proteins.
Biodegradation, Environmental↗
A functionalizable biomaterial based on dihydroxyacetone, an intermediate of glucose metabolism.
A biomaterial and its potential degradation products should be biocompatible, nontoxic, and removed by the body upon expiration of its functional lifetime. One historically successful approach is to create new materials from biomolecules that naturally occur in the human body. Herein, we report the synthesis and characterization of a polycarbonate based on dihydroxyacetone, a 3-carbon ketose, and an intermediate in the glucose metabolic pathway. The polymer was synthesized in a range of molecular weights ( approximately 8000 to approximately 37,500) by ring-opening polymerization. The C2 carbonyl of dihydroxyacetone is reactive to amines, and this reactivity was used to functionalize the polymer's surface in a one-step reaction by reductive amination. Additionally, contact angle measurements show the surface of poly(2-oxypropylene carbonate) is hydrophilic even though it is insoluble in water. Mechanical analysis of the polymer revealed it is exceptionally strong for an aliphatic polycarbonate. Specifically, poly(2-oxypropylene carbonate), M(w) 37 500, yielded a Young's modulus of 0.5 GPa and a compressive yield stress of 50 MPa. These values equal or exceed those of cancellous bone with similar dimensions.
Biocompatible Materials↗
Diblock copolymers based on dihydroxyacetone and ethylene glycol: synthesis, characterization, and nanoparticle formulation.
Polymeric biomaterials have played an integral role in tissue engineering, biomedical devices, and targeted drug delivery. Block copolymers are especially important because their physical and chemical properties can be controlled by adjusting the ratio, size, and type of constituting blocks. Herein, the synthesis and characterization of diblock copolymers composed of poly(ethylene glycol) and a polycarbonate based on the metabolic intermediate, dihydroxyacetone, are reported. The length of the dihydroxyacetone-based block was controlled by adjusting the reactant feed ratios and initiator injection conditions. Intermediates and final products were characterized via (1)H NMR, GPC, DSC, TGA, and diffusion-ordered NMR spectroscopy. The dihydroxyacetone-based hompolymer is insoluble in water and most organic solvents, but is hydrophilic in nature. This, coupled with poly(ethylene glycol)'s solubility characteristics, allows the block copolymer to form nanoparticles in aqueous and organic anti-solvents. Dynamic light scattering and TEM results indicated the formation of spherical nanoparticles.
Calorimetry, Differential Scanning↗
Competitive reactions in solutions of poly-L-histidine, calf thymus DNA, and synthetic polyanions: determining the binding constants of polyelectrolytes.
The physicochemical characteristics of a nonviral gene delivery system will govern its functional bioactivity; however, empiricism dominates the literature in this field, and a significant deficiency of quantitative investigation and evaluation of nonviral gene delivery vehicles remains. Herein, we derive a physical model and experimental method to quantitatively determine the binding constants between a model polycationic nonviral gene delivery vehicle poly-L-histidine (PLH) and calf thymus DNA. The approach has utility to a variety of systems and is not limited to the described polymer model. The interaction of PLH with DNA was monitored by fluorescence quenching of an ethidium bromide probe in the pH range 4 to 8. The interaction increased with pH decrease with the most pronounced change between pH 6 and 7. The obtained pH-dependence of fraction of salt bonds formed between PLH and DNA was used to estimate pK(a) of PLH in the presence of DNA, which equaled 6.24. The interaction of PLH with DNA in the presence of added synthetic polyanions was studied by the same approach and found to be controlled by pH, nature of the charge groups of the polyanion, and its degree of polymerization. In the mixture with sodium poly(styrenesulfonate) the interaction was negligible in the whole studied pH range, whereas in the mixtures with sodium poly(acrylate) (PA) or sodium poly(methacrylate), DNA was able to compete effectively for the binding with PLH. For PA samples with degree of polymerization higher than degree of polymerization of PLH, DP(PA) > DP(PLH), the fraction of polycation bound to DNA was constant regardless of DP(PA.) In contrast, at DP(PA) < DP(PLH), a pronounced increase in the bound fraction was observed. It substantiates the notion that the binding energy of two polymers is mainly controlled by the DP of the shorter component of polyelectrolyte complex. The data on PLH distribution between DNA and added polyanion with different values of DP were treated according to the developed procedure to yield the effective binding constants of PLH with DNA and polyanion-competitor, calculated both per mole of interacting units K(1) and mole of interacting chains K(n). In all cases, K(1) had similar numerical values reflecting common type of interaction stabilizing the complexes, i.e., electrostatics. Slight variation of K(1) yielded in drastic changes in K(n) and alteration of dominance of PLH interaction with DNA or synthetic polyanion. The results of the study can have a high impact in deriving the correlation between the binding constant of a polycation to DNA and its ability to serve as gene delivery vehicle.
Acrylic Resins↗
Polyhistidine-PEG:DNA nanocomposites for gene delivery.
Complexation of plasmid DNA with polycations is a popular method by which to transfer therapeutic nucleic acid sequences to cells. One caveat of the approach is that the positive zeta potential of the complexes facilitates interaction with blood constituents, leading to serum protein adsorption and complement activation. As a countermeasure, investigators have developed polycations combined with polyethylene glycol (PEG) to create complexes with reduced protein adsorption potential. We have designed and synthesized PEG-polyhistidine conjugates to evaluate the material class as potential gene delivery vehicles. Two conjugate architectures (comb-shaped and linear A-B block copolymers) were synthesized and formulated with plasmid DNA. The complexes were characterized with respect to DNA complexation capacity, hydrodynamic diameter, zeta potential, in vitro cytotoxicity and transfection capacity in a model cell line. PEG content of the conjugate significantly influenced the hydrodynamic diameter of the DNA:conjugate composite in aqueous solution. For comb-shaped conjugates steric hindrance attributed to PEG led to a direct relationship between the PEG content and the complex size. Both architectures could condensed plasmid DNA into complexes with hydrodynamic diameters <150 nm. Complexation of DNA with the polyhistidine-PEG conjugates resulted in nanocomposites with negative zeta potentials that retarded DNase I-mediated hydrolysis, and all conjugates showed low cytotoxicity to macrophages cultured in vitro. The transfection efficiency was approximately equivalent to DNA:polylysine complexes. The formulation characteristics and low cytotoxicity suggest that polyhistidine-PEG conjugates may be useful for gene delivery.
Animals↗
Erodible conducting polymers for potential biomedical applications.
Explore the source record for details and available documents.
Biocompatible Materials↗
Aliphatic ionenes as gene delivery agents: elucidation of structure-function relationship through modification of charge density and polymer length.
Polycation-based gene delivery agents are generally polydisperse populations whose properties are averaged among the different molecular weight species. Therefore, to understand the physicochemical properties of polycations and their relationships to cellular gene transfer, one needs to control the molecular weight of the polymer as well as its cationic charge density. To investigate the structure-function correlation of polycations with respect to the degree of polymerization (DP) and charge density, a series of model materials based on aliphatic ionenes was synthesized and fractionated into distinct molecular weight fractions with DP range from 14 to 32. The aliphatic ionene fractions and their polyelectrolyte complexes (PEC) with DNA were studied using physicochemical and biological methods. Ionene polymers were shown to possess low cytotoxicity (minimal viability of the P388D1 murine macrophage cells 80%). DP and charge density of the ionenes were shown to be the factors of effective control of PEC dissociation in water-salt solutions, with a diminished role of charge density upon lengthening the ionene chain. These polymer characteristics were also important for DNA-ionene PEC resistivity to DNase activity and the ability of ionenes to serve as gene delivery vectors in vitro and exhibited good correlation with the results of salt-induced dissociation of PEC. These data may be useful for developing correlations and mathematical models to predict synthetic gene delivery vector efficiency.
Animals↗
Recognition and selective binding of DNA by ionenes of different charge density.
The ability of aliphatic ionenes to recognize and bind DNA or poly(methacrylic acid) (PMA) in the equimolar mixture of these polyanions was studied by fluorescence quenching technique. Within a particular system, the selectivity of competitive interactions was shown to be determined by a component with the lowest degree of polymerization (DP). Ionene polycations with lowest DP values did not exhibit pronounced selectivity in binding DNA or PMA with higher values of DP. Increase in ionene DP resulted in a steady increase in selectivity of interaction and ultimately in almost exclusive binding of one of the two polyanions. The ability of the ionene to recognize and bind DNA in the mixture of polyanions was shown not to correlate with the affinity of the ionene to DNA in their binary mixture. Although ionenes with a higher charge density exhibited preferential binding to PMA, the ionenes with the lowest charge density selectively bound DNA.
Biocompatible Materials↗