Biomedical subjects

Ali Ihya Karaman

Publications and source records attributed to Ali Ihya Karaman.

At least 19 recordsLinked to original sources

PubMed2006

Use of the intraosseous screw for unilateral upper molar distalization and found well balanced occlusion.

BACKGROUND: The aim of this study was to present a temporary anchorage device with intraosseous screw for unilateral molar distalization to make a space for the impacted premolar and to found well balanced occlusion in a case. CASE PRESENTATION: A 13-year-old male who have an impacted premolar is presented with skeletal Class I and dental Class 2 relationship. The screw was placed and immediately loaded to distalize the left upper first and second molar. The average distalization time to achieve an overcorrected Class I molar relationship was 3.6 months. There was no change in overjet, overbite, or mandibular plane angle measurements. Mild protrusion (0.5 mm) of the upper left central incisor was also recorded. CONCLUSION: Immediately loaded intraosseous screw-supported anchorage unit was successful in achieving sufficient unilateral molar distalization without anchorage loss. This treatment procedure was an alternative treatment to the extraction therapy.

Adolescent↗

PubMed2006

Effects of mandibular symphyseal distraction osteogenesis on mandibular structures.

INTRODUCTION: The purpose of this study was to evaluate the effects of mandibular symphyseal distraction osteogenesis on dental and mandibular skeletal structures with a tooth- and bone-borne distraction device. METHODS: The sample comprised 20 patients, ranging in age from 15.8 to 23.3 years (mean, 20.1 +/- 2.3 years) at the start of treatment. The distraction device was activated 1 mm per day. The device was usually maintained in position about 90 days after surgery. Records were obtained at the start of treatment, at the end of distraction (11.4 +/- 2.2 days after surgery), and at follow-up periods (24.1 +/- 4.2 months after surgery). The records included posteroanterior cephalograms and study casts. The data were analyzed statistically by using the repeated measure analysis of variance and paired t test. RESULTS: Posteroanterior cephalometric analysis demonstrated no significant changes in bigonial widths and ramal angles at the end of distraction period. On the other hand, bimolar widths were significantly increased, whereas bicondylar widths were markedly decreased. The dental cast analysis indicated that the maximum amount of increase was found between the mandibular canines, and the widening effect gradually decreased from the mandibular canines to the second molars. The follow-up data confirmed that the treatment results were stable. CONCLUSIONS: The long-term findings indicate that mandibular symphyseal distraction osteogenesis is an efficient nonextraction treatment alternative for mandibular dental crowding to increase mandibular skeletal and dental arch widths.

Adolescent↗

PubMed2006

The use of parental data to evaluate soft tissues in an Anatolian Turkish population according to Holdaway soft tissue norms.

INTRODUCTION: The relative influence of genetic and environmental factors in the etiology of malocclusion has long been a matter for discussion. The aim of this study was to compare the soft tissue structures of parents and their prepubertal, pubertal, and postpubertal offspring according to the Holdaway soft tissue norms to determine the similarity among them. Differences related to age and sex between the parents and offspring were also evaluated. METHODS: Lateral cephalometric radiographs were used to determine the similarities in soft tissue structures in 120 families, which were divided into prepubertal (n = 40), pubertal (n = 40), and postpubertal (n = 40) groups according to the children's skeletal ages. A total of 12 variables (2 angular and 10 linear) were measured according to Holdaway's soft tissue analysis. Pairs were formed between family members (mother to son, mother to daughter, father to son, father to daughter, midparent (mean of the father's and mother's values) to son, and midparent to daughter) in each group. Descriptive statistics and multiple linear regression analysis were performed. RESULTS: Statistically significant correlations between parents and their offspring were found. The parental data showed that a mother's genetic influence on her child's soft tissues was greater than the father's. Moreover, it was found that daughters had greater genetic influences from their parents than did sons. As age increased, the similarity was greater. Soft tissue facial angle (beta: 0.671), soft tissue chin thickness (beta: 0.549), and basic upper lip thickness (beta: 0.537) were the most similar variables between parents and their offspring. CONCLUSIONS: A few selected cephalometric measurements of the parents might furnish important data to the clinician in predicting a child's facial growth characteristics and aging process.

Adolescent↗

PubMed2006

An alternative method for splinting of traumatized teeth: case reports.

Injuries to the dentoalveolar complex are fairly common and can be caused by a number of reasons. There are many techniques for repositioning and stabilizing traumatically luxated or avulsed teeth. Many of the splinting techniques previously advocated were time-consuming. Not only were the splints difficult to fabricate and difficult to remove, they also contributed to injury of the soft and hard supporting tissues. Ribbond (Ribbond Inc., Seattle, Wash) is basically a reinforced ribbon which is made from ultrahigh molecular weight polyethylene fiber having an ultrahigh modulus. It is used in dentistry for various purposes. The use of Ribbond appears to be an adequate and easy method for stabilization and fixation. It can be used in the treatment of dental injuries. In this article the use of Ribbond for the treatment of dentoalveolar injuries is described.

Child↗

PubMed2005

Pain control during fixed orthodontic appliance therapy.

The control of pain during orthodontic treatment is of great interest to both clinicians and patients. However, there has been limited research into the control of this pain, and there is no standard of care for controlling this discomfort. This prospective study determines the pain sequelae in fixed orthodontic treatment and evaluates comparatively the analgesic effects of nonsteroidal anti-inflammatory drugs for the control of this pain. One hundred and fifty orthodontic patients who were to have teeth bonded in at least one arch were randomly assigned to one of six groups: (1) placebo/placebo, (2) ibuprofen/ibuprofen, (3) flurbiprofen/flurbiprofen, (4) acetaminophen/acetaminophen, (5) naproxen sodium/naproxen sodium, and (6) aspirin/aspirin. The pain evaluations were made during chewing, biting, fitting the front teeth, and fitting the back teeth using a 100-mm visual analogue scale (VAS) for seven days. All the analgesics succeeded in decreasing the pain levels compared with the placebo group. However, naproxen sodium and aspirin groups showed the lowest pain values, and the acetaminophen group showed VAS results similar to those of the two analgesics.

Acetaminophen↗

PubMed2005

Effects of a chlorhexidine varnish on shear bond strength in indirect bonding.

The purpose of this study was to evaluate the effects of an antimicrobial varnish on the shear bond strength (SBS) of metallic orthodontic brackets bonded with an indirect bonding resin. For this purpose, 60 noncarious human premolars were divided into three equal groups. Group 1 was an indirect bonding control group and, after acid etching of the enamel, the brackets were indirectly bonded to the teeth with an indirect bonding resin. In group 2, before bonding, an antimicrobial varnish was painted on the etched enamel and indirect bonding was carried out as in group 1. In group 3, Transbond MIP primer and the antimicrobial varnish were thoroughly mixed in a 1:2 proportion, applied to the enamel surface, light cured for 20 seconds, and the brackets were direct bonded. A universal testing machine was used to determine the maximum load necessary to debond the brackets, the SBS values recorded, and the adhesive remnant index scores determined. Data were analyzed using analysis of variance (ANOVA), Tukey HSD, and chi-square tests. Results of ANOVA revealed statistically significant differences in the SBS among the various groups tested (P < .05). Indirect bonding of brackets with Sondhi Rapid Set after the application of the antimicrobial varnish showed significantly lower SBS when compared with both the group 2, indirect bonding control group, and the group 3, direct bonded-antimicrobial varnish group.

Acid Etching, Dental↗

PubMed2005

Effects of preoperative ibuprofen and naproxen sodium on orthodontic pain.

Three experimental groups of 20 patients each, all of whom were to undergo fixed orthodontic treatment, were enrolled in this prospective study. Group 1 was given a placebo, group 2 was given 400 mg ibuprofen, and group 3 was given 550 mg naproxen sodium. All the patients received only one dose that was given one hour before archwire placement. All patients were asked to complete a questionnaire concerning the pain perceived after archwire placement. The questionnaire was in the form of a seven-page booklet that contained 100-mm horizontal Visual Analogue Scale on which the patient marked the degree of discomfort at the indicated time periods. The patients were instructed to make a check on the scale at each time interval to represent the perceived severity of pain during each of four activities, ie, chewing, biting, fitting back teeth together, and fitting front teeth together. Incidence and severity of pain were recorded by the patient at two hours, six hours, nighttime on the day of appointment, 24 hours after the appointment, and two days, three days, and seven days after bonding. The results revealed that patients taking 550 mg naproxen sodium one hour before archwire placement had significantly lower levels of pain at two hours, six hours, and nighttime after adjustment than patients taking placebo or ibuprofen. However, the use of additional postoperative doses was recommended to control orthodontic pain completely.

Adolescent↗

PubMed2005

Does orthodontic treatment affect patients' and parents' anxiety levels?

The aims of this study were (1) to determine and compare the anxiety levels of two groups of patient and parents, (2) to identify possible gender differences between male and female subjects and (3) to evaluate any changes in anxiety levels after 1 year of treatment. The first group consisted of 40 subjects with a mean age of 15.6 +/- 1.2 years awaiting orthodontic treatment, plus one parent of each subject (mean age 43.4 +/- 2.3 years). The second group comprised 43 patients with a mean age of 16.0 +/- 1.1 years who had been undergoing treatment for a period of 1 year, plus one parent of each patient (mean age 41.0 +/- 1.9 years).Personal information forms and Spielberger's 'State and Trait Anxiety Inventory' (STAI) were applied to both groups. To compare the two groups and to determine the differences between males and females, independent-sample t-tests were used. Internal consistencies for the two scales of the STAI were evaluated with Cronbach's alpha coefficient. Trait anxiety levels of parents (51.05 +/- 5.1) and state anxiety levels of subjects (58.57 +/- 6.73) who were about to start orthodontic treatment were both high. The difference between the groups was statistically significant (P < 0.05). In patients who had undergone treatment for 1 year, the scores were found to be normal (43.28 +/- 5.91). However, their parents' high levels of trait anxiety remained unchanged (50.41 +/- 4.2).

Adolescent↗

PubMed2005

Degree of conversion of two lingual retainer adhesives cured with different light sources.

The aim of this study was to evaluate the degree of conversion (DC) of two lingual retainer adhesives, Transbond Lingual Retainer (TLR) and Light Cure Retainer (LCR), cured with a fast halogen light, a plasma arc light and a light-emitting diode (LED) at various curing times. A conventional halogen light served as the control. One hundred adhesive samples (five per group) were cured for 5, 10 or 15 seconds with an Optilux 501 (fast halogen light), for 3, 6 or 9 seconds with a Power Pac (plasma arc light), or for 10, 20 or 40 seconds with an Elipar Freelight (LED). Samples cured for 40 seconds with the conventional halogen lamp were used as the controls. Absorbance peaks were recorded using Fourier transform infrared (FT-IR) spectroscopy. DC values were calculated. Data were analysed using Kruskal-Wallis and Mann-Whitney U-tests. For the TLR, the highest DC values were achieved in 6 and 9 seconds with the plasma arc light. Curing with the fast halogen light for 15 seconds and with the LED for 40 seconds produced statistically similar DC values, but these were lower than those with the plasma arc light. All of these light exposures yielded a statistically significantly higher DC than 40 seconds of conventional halogen light curing. The highest DC value for the LCR was achieved in 15 seconds with the fast halogen light, then the plasma arc light curing for 6 seconds. These two combinations produced a statistically significantly higher DC when compared with the 40 seconds of conventional halogen light curing. The lowest DC for the LCR was achieved with 10 seconds of LED curing. The overall DC of the LCR was significantly higher than that of the TLR. The results suggest that a similar or higher DC than the control values could be achieved in 6-9 seconds by plasma arc curing, in 10-15 seconds by fast halogen curing or in 20 seconds by LED curing.

Adhesives↗

PubMed2005

Non-surgical treatment of Class III malocclusion in adults: two case reports.

Class III malocclusions are usually growth-related discrepancies, which often become more severe until growth is complete. The surgery can be part of the treatment plan. The purpose of this report is to review the orthodontic treatment of two patients with a Class III malocclusion who were treated non-surgically. The basis for this treatment approach is presented and the final treatment result reviewed. Important factors to consider when establishing a Class III molar relationship are discussed.

Adult↗

PubMed2004

Effect of light-emitting diode on bond strength of orthodontic brackets.

The aim of this study was to evaluate the effect of light-emitting diode (LED) light curing on shear bond strength (SBS) of orthodontic brackets bonded to teeth. Light exposure of 40 seconds from a conventional halogen-based light-curing unit was used as a control. Eighty human premolars were divided into four groups of 20 each. Brackets were bonded to acid-etched teeth with Transbond XT light-cured adhesive. In the first group, the adhesive was light cured for 40 seconds with a conventional halogen unit (XL3000, 3M). In the other three groups, adhesive was cured with a commercial LED unit (Elipar FreeLight, 3M ESPE) for 10, 20, or 40 seconds. SBS of brackets was measured on a universal testing machine and recorded in megapascals. Adhesive remnant index (ARI) scores were determined after failure of brackets. Data were analyzed using analysis of variance and chi-square tests. No statistically significant differences were found among the SBS values of halogen-based light-cured (13.1 +/- 3.1 MPa) and 20- and 40-second LED-cured (13.9 +/- 4.8 MPa and 12.7 +/- 5.1 MPa) specimens (P > .05). However, 10 seconds of LED curing yielded significantly lower SBS (P < .05). No statistically significant differences were found between the ARI scores among groups. The results of this study are promising for the orthodontic application of LED-curing units, but further compatibility and physical characteristic studies of various orthodontic adhesives and clinical trials should be performed before validation.

Dental Bonding↗

PubMed2004

In vitro evaluation of shear bond strengths and in vivo analysis of bond survival of indirect-bonding resins.

In this study we evaluate the shear bond strengths (SBS) of indirect-bonding systems available on the market. For the in vitro study, 60 extracted premolars were divided into three groups. In indirect group I, the brackets were bonded to models using Therma Cure laboratory resin and transferred to the teeth using Custom IQ resin for indirect bonding. For indirect group II, the teeth were attached to models using Transbond XT and transferred using Sondhi Rapid Set. In the direct-bonding group, the brackets were bonded to teeth directly using Transbond XT The SBS were evaluated, and the comparisons were made. In the in vivo study, left half of the upper arch and right half of the lower arch were bonded using Sondhi's indirect-bonding resin and right half of the upper arch and left half of the lower arch were bonded using Therma Cure as a laboratory resin and Custom IQ as a clinical bonding resin. The failure rates of the brackets were followed for nine months. Analysis of variance and Tukey tests were performed. Mean SBS values (MPa) were 10.3 +/- 4.2, 6.1 +/- 1.6, and 12.8 +/- 5.4 for the indirect groups I and II and for the direct-bonding group, respectively. There were no significant differences between indirect group I and direct group (P > .05), whereas both yielded significantly higher SBS values compared with indirect group II. In vivo bond survival evaluation showed no differences between the two indirect-bonding systems available.

Bicuspid↗

PubMed2004

Effectiveness of a hydrophilic primer when different antimicrobial agents are mixed.

The purpose of this study was to determine whether different types of antimicrobial agents with hydrophilic primer applied to etched enamel surfaces will affect the shear bond strength (SBS) and the bracket/adhesive failure modes of metallic orthodontic brackets. Eighty noncarious human premolars were divided into four groups of 20 each. A composite resin (Transbond XT) was used to bond stainless steel brackets. Teeth in the first group were used as a control and bonded with standard procedures. For the other three groups, mixtures containing a hydrophilic primer (Transbond MIP) and one of three anti-microbial agents were prepared (Cervitec: in 1:2 ratio; chlorhexidine mouthwash and EC40 varnish in 1:1 ratio). These mixtures were applied to the etched enamel surfaces and thoroughly light cured for 20 seconds, and the brackets were bonded and light cured for 40 seconds. The SBS values of these brackets (Mpa) were recorded using a universal testing machine. Adhesive Remnant Index scores were determined after failure of the brackets. Data were analyzed using analysis of variance (ANOVA), Tukey honestly significant difference, and chi-square tests. Results of ANOVA revealed statistically significant differences in bond strengths among the various groups tested (P < .05). The bond strength values in these four groups compared favorably with those from other studies and the minimal bond strength values that are clinically acceptable. However, results of this study demonstrated that groups 1 (control) and 2 (Cervitec varnish) had higher SBS values than the other applications. Application of different antimicrobial agents may result in differences in the site of failure.

Analysis of Variance↗

PubMed2004

The effects of early preorthodontic trainer treatment on Class II, division 1 patients.

The aim of this study was to clarify the dentoskeletal treatment effects induced by a preorthodontic trainer appliance treatment on Class II, division 1 cases. Twenty patients (10 girls and 10 boys, mean age 9.6 +/- 1.3 years) with a Class II, division 1 malocclusion were treated with preorthodontic trainer appliances (Myofunctional Research Co., Queensland, Australia). The patients were instructed to use the trainer every day for one hour and overnight while they slept. A control group of 20 patients (mean age 10.2 +/- 0.8 years) with untreated Class II, division 1 malocclusions was used to eliminate possible growth effects. Lateral cephalograms were taken at the start and end of treatment. Final cephalograms were taken 13.1 +/- 1.8 months after trainer application, compared with a mean of 11.2 +/- 2.4 months later for the control group. The mean and standard deviations for cephalometric measurements were analyzed by paired-samples t-test and independent-samples t-tests. At the end of the study period, the trainer group subjects showed significant changes including anterior rotation and sagittal growth of the mandible, increased SNB and facial height, reduced ANB, increased lower incisor proclination, retroclination of upper incisors, and overjet reduction. However, only total facial height increase, lower incisor proclination, and overjet reduction were significantly higher when compared with the changes observed in the control group. This study demonstrates that the preorthodontic trainer application induces basically dentoalveolar changes that result in significant reduction of overjet and can be used with appropriate patient selection.

Cephalometry↗

PubMed2003

A practical method of fabricating a lingual retainer.

Retention is a major part of orthodontic treatment, not an optional secondary protocol. In recent years, studies investigating dentofacial changes during and after the growth period have led most clinicians to use fixed retention appliances after treatment. Fixed retainers can be attached to the teeth directly or indirectly. We present a practical, indirect method for bonding fixed retainers, using Sondhi Rapid-set Indirect Bonding Adhesive (3M Unitek, Monrovia, Calif).

Dental Bonding↗

PubMed2003

Effects of fast halogen and plasma arc curing lights on the surface hardness of orthodontic adhesives for lingual retainers.

The aims of this study were to (1) identify the optimum cure times of 2 different lingual retainer adhesives with a conventional halogen, a fast halogen, and a plasma arc light by measuring Vickers surface hardness, and (2) determine whether different lights produce similar surface hardness values for the same adhesive resin material. The investigated plasma arc curing unit was the PowerPac (American Dental Technologies, Corpus Christi, Tex), and the fast halogen unit was the Optilux 501 (Kerr, Orange, Calif). A conventional curing unit, the Ortholux XT (3M Dental Products, St. Paul, Minn) was used as the control. Two orthodontic lingual retainer adhesives were used: Transbond Lingual Retainer (3M Unitek, Monrovia, Calif) and Light Cure Retainer (Reliance Orthodontic Products, Itasca, Ill). Concise (3M Dental Products) and diluted Concise were used as controls. Transbond Lingual Retainer was polymerized by the PowerPac light in 6 seconds, by the Optilux in 10 seconds, and by the conventional halogen light in 20 seconds. The minimum curing times for Light Cure Retainer adhesive were 15 seconds for PowerPac, 10 seconds for Optilux, and 40 seconds for conventional halogen. Surface hardness values for each resin did not differ significantly with different curing units. However, different adhesives demonstrated significantly different surface hardness values. Final Vickers surface hardness values (averaged across curing units) of Transbond Lingual Retainer, Concise, diluted Concise, and Light Cure Retainer were 62.8, 52.4, 46.0, and 40.4, respectively. Plasma arc or fast halogen units polymerize resin composite adhesive in much shorter times than do conventional curing units, without a significant loss in surface hardness. Therefore, these units are suggested for clinical use to save chairside time.

Adhesives↗

PubMed2003

Effect of self-etching primers on bond strength--are they reliable?

Currently introduced self-etching primers combine conditioning and priming agents into a single product. The purpose of this study was to determine the effects of using three self-etching primers on the shear bond strength (SBS) of orthodontic brackets and on the bracket/adhesive failure mode. Brackets were bonded to extracted human teeth according to one of four protocols. In the control group, teeth were etched with 37% phosphoric acid. In the experimental groups, the enamel was conditioned with three different self-etching primers, Clearfil SE Bond (CSE), Etch & Prime 3.0 (EP3), or Transbond Plus (TBP), as suggested by the manufacturer. The brackets were then bonded with Transbond XT in all groups. The present in vitro findings indicate that conditioning with TBP before bonding orthodontic brackets to the enamel surface resulted in a significantly (P < or = .001) higher SBS (mean, 16.0 +/- 4.5 MPa) than that found in CSE, EP3, and the control (acid-etched [AE]) groups. CSE produced bond strength values (mean 11.5 +/- 3.3 MPa) that are statistically comparable to those produced by acid etching (mean 13.1 +/- 3.1 MPa). The use of EP3 for enamel conditioning resulted in the lowest mean SBS value (mean 9.9 +/- 4.0 MPa). A comparison of the adhesive remnant index scores indicated that there was more residual adhesive remaining on the teeth that were treated with conventional acid etching than in the CSE and EP3 groups. In the TBP group, the failure sites were similar to those of the AE group but different from those of the CSE group.

Acid Etching, Dental↗

PubMed2003

Management of alveolar clefts using dento-osseous transport distraction osteogenesis.

This article evaluates the usage of distraction osteogenesis (DO) in the treatment of cleft alveoli. The procedure was carried out on eight alveolar clefts of five patients between the ages of 17 and 25 years. Three patients had bilateral alveolar clefts (BAC) and two patients had unilateral alveolar clefts (UAC). DO was carried out bilateral to the palatal segments for the BAC patients and unilateral to the lesser segment for the UAC patients. A custom-made tooth-borne distractor was used. The average amount of distraction was eight mm (range, 5-11.5 mm). The average amount of distal movement of the anchorage teeth was 0.8 mm (range, 0-2 mm). The average amount of inclination changes of the transport segments and anchorage teeth was 7.6 degrees (range, 2-17.5 degrees) and 3.3 degrees (range, 0-9 degrees), respectively. Two important problems were observed attributable to the method. First, the transport segment was docked in a more superior position at the end of distraction process. This undesirable movement also changed the inclination of the teeth in the transport segment and increased tooth tipping. Removing the device in the second week of the consolidation period and retracting the segment to its ideal position orthodontically solved these problems. Second, the bony defect on the nasal side of the alveolar cleft could not be completely closed. This method for repairing small or large alveolar clefts is a simple, cost-effective, and useful treatment option. However, repairing the alveolar cleft without grafts seems to be impossible when using a tooth-borne device.

Adolescent↗