PubMed Health⌕ Search

Biomedical subjects

Alireza Ghassempour

Publications and source records attributed to Alireza Ghassempour.

10 recordsLinked to original sources

Time- and Dose-Resolved DIA-PASEF Proteomics Maps the Transition from Adaptive Stress to Apoptotic Collapse in Melittin-Treated MDA-MB-231 Cells.

Melittin, the cytolytic peptide of honeybee venom, exhibits potent anticancer activity in triple-negative breast cancer (TNBC), yet the molecular programs underlying its cytotoxic effects remain incompletely defined. To address this gap, MDA-MB-231 TNBC cells were exposed to melittin at half-maximal inhibitory concentration(half IC50) and IC50 across early(0.5, 1, and 2 h), mid(3, 4 h), and late (12, 24 h) time windows. Proteomic profiling was performed using label-free data-independent acquisition(DIA) parallel accumulation-serial fragmentation(PASEF). Approximately 5800 proteins were quantified, revealing distinct dose-dependent stress responses. An integrative exploratory framework combining time-resolved log2 fold-change trajectories, area-under-the-curve(AUC) based temporal prioritization, and independent heatmap visualization identified proteins associated with melittin-induced stress remodeling. Half IC50 exposure showed a transient stress-adaptive signature characterized by chromatin remodeling(HMGN2, H2AZ1), structural and RNA-associated buffering(LRRC7), and indirect mitochondrial quality-control signaling(CPAMD8, SPATA4), which progressively weakened over time. In contrast, IC50 treatment induced rapid chromatin remodeling dominated by histone H1 variants(H1.4, H1.2), early RNA instability(LRRC7), and late-stage cytoskeletal disassembly marked by MICAL3 induction, consistent with progression toward apoptosis. These trajectories paralleled dose-dependent apoptotic phenotypes. Overall, data suggest that melittin elicits dose- and time-dependent proteomic stress responses in TNBC cells and identify candidate trajectory-associated proteins and pathways linked to adaptive stress remodeling or progression toward cytotoxic collapse.

Melitten↗

Chiral separation of three agrochemical toxins enantiomers by high-performance liquid chromatography on a vancomycin crystalline degradation products-chiral stationary phase.

This work aims to evaluate for the enantiomeric separations of three agrochemical toxins: haloxyfop-methyl, fenoxaprop-p-ethyl and indoxacarb on crystalline degradation products-chiral stationary phase (CDP-CSP) of high-performance liquid chromatography (HPLC) under normal and polar organic phases. In the normal phase, the mobile phase was n-hexane with alcohols including methanol and isopropanol as polar modifiers. In the polar organic phase mode, the mobile phase was methanol with different percentages of triethylammunium acetate. The influence of flow rate (0.3-0.9 mL/min), analyte concentration and silica gel particle sizes (10, 15 and 30 microm) was investigated. This new chiral stationary phase showed excellent stereoselectivity for the two enantiomers of haloxyfop-methyl and fenoxaprop-p-ethyl and chiral recognition for indoxacarb under normal-phase mode. However, under polar organic phase, only indoxacarb was separated (alpha < 1.5). The chromatographic results were compared with commercial chiral columns.

Acetonitriles↗

A new solution for a chronic problem; aqueous enteric coating.

In this research, we have reconsidered the current enteric coating techniques and offered a new solution using both theoretical and practical approaches. This approach is based on the fact that salt formation can solubilize the pH-sensitive polymers in water. However, having applied the polymer solution onto the dosage form's surface, the polymer should be converted to the nonionized form for delayed release action. Ammonium hydrogen carbonate (AHC) is used as a buffering agent with dual actions of salting in and desalting the polymer. Following the application of the coating medium onto the dosage form's surface and drying, AHC dissociate completely to ammonia, carbon dioxide, and water converting the polymer to its nonionized form. FT-IR studies on free film samples further confirmed the proposed mechanism. A range of pH-sensitive polymers and other ingredients in water have been successfully applied at the surface of a model ASA tablets, using pan coating technique. According to the SEM observation, the coating layer is very dense and rigid, despite the fact that, the coated amount of the polymers is quit small. The enteric tablets maintain their shapes in acid medium and passed the USP dissolution test for DR ASA tablets.

Aspirin↗

Analysis of anatoxin-a using polyaniline as a sorbent in solid-phase microextraction coupled to gas chromatography-mass spectrometry.

A simple and sensitive method for determining anatoxin-a in aqueous samples was developed using solid-phase microextraction (SPME) and gas chromatography with mass spectrometry (GC-MS) detection. Three forms of polyaniline (PANI) films and a single form of polypyrrole (PPY) film were prepared and applied for SPME. The extraction properties of these films to anatoxin-a were examined and it was shown that leucoemeraldine form of PANI displayed a better selectivity to this compound. SPME conditions were optimized by selecting the appropriate extraction parameters, including type of coating (leucoemeraldine form of PANI at 32 microm thicknesses), salt concentration (10%, w/v), time of extraction (30 min) and stirring rate (1000 rpm). The calibration curve was linear in the range from 50 to 10,000 ng/ml, with the detection limit (S/N = 3) of 11.2 ng/ml. This method was successfully applied for the analysis of anatoxin-a in the cultured media of two species of cyanobacteria.

Aniline Compounds↗

Determination of residual solvents and investigation of their effect on ampicillin trihydrate crystal structure.

In the present work, the relationship between residual solvents concentration and ampicillin trihydrate crystals stability has been investigated. The amounts of residual solvents determined by GC, X-ray powder diffraction (XRPD) and Fourier transform infrared spectroscopy (FT-IR) were used for characterization of solid state. The obtained results have shown good relationship between concentration of methylene chloride (as a critical residue solvent) and degree of ampicillin trihydrate crystallinity. As with the increasing methylene chloride concentration in the sample the degree of crystallinity decreased after stability test. From this relationship, critical concentration of methylene chloride into the ampicillin trihydrate is obtained and the results can be used for improving the large-scale production of ampicillin trihydrate.

Ampicillin↗

Optimization of microwave-assisted extraction for alizarin and purpurin in Rubiaceae plants and its comparison with conventional extraction methods.

A simple and rapid microwave-assisted extraction (MAE) procedure was developed and optimized for two common color pigments, alizarin and purpurin, in various samples of Rubiaceae plants. Several variables that can potentially affect the extraction efficiency, namely temperature, methanol concentration in the extractant mixture, time, and solvent volume were optimized by means of a central composite design approach. The results suggest that temperature and methanol concentration in the solvent mixture are statistically the most significant factors. The separation and quantitative determination of the pigments was carried out in less than 6 min by a developed high-performance liquid chromatographic method with UV detection at 250 nm. Under optimum operating conditions, MAE showed significantly higher recoveries than those obtained by the conventional extraction methods (ultrasonic and reflux extraction), ranging from 84 to 94%. In addition, a drastic reduction of the extraction time (20 min versus 6 h) and solvent consumption (20 versus 100 mL) was achieved with a reproducibility (RSDs < 10%) comparable with that provided by the reflux extraction as a reference method.

Anthraquinones↗

Monitoring of the fermentation media of citric acid by the trimethylsilyl derivatives of the organic acids formed.

In this approach, a derivatization method is described for monitoring of organic acids in fermentation media without any separation step. The aqueous phase of fermentation media was evaporated and heated in a silylation reagent to form trimethylsilyl (TMS) derivatives. The silylated compounds are analyzed by 29Si nuclear magnetic resonance (29Si NMR) and gas chromatography-mass spectrometry (GC-MS). 29Si NMR can qualitatively monitor the components produced in the Krebs cycle. Quantification of these compounds is investigated by using selected ion monitoring mode of mass spectrometry. In this mode, mass to charge (m/z) values of their [M - 15]+ ions, which are 465, 275, 247, 221, 335, 251, and 313 of TMS derivatives of citric, alpha-ketoglutaric, succinic, fumaric, l-malic, oxaloacetic, and palmitic (as an internal standard), acids, respectively, are used. The limit of detection and the linear working range for derivatized citric acid were found to be 0.1 mg L(-1) and 10-3 x 10(4) mg L(-1). The relative standard deviation of the method for five replicates was 2.1%. The average recovery efficiency for citric acid added to culture media was approximately 97.2%. Quantitative results of GC-MS are compared with those obtained by an ultraviolet-visible method.

Aspergillus niger↗

Optimization of the extraction of paclitaxel from Taxus baccata L. by the use of microwave energy.

A simple and rapid microwave-assisted extraction (MAE) procedure was developed and optimized for the extraction of paclitaxel (Taxol) from the needles of yew trees Taxus baccata L. grown in Iranian habitats. The samples, immersed in a methanol-water mixture, were irradiated with microwaves in a closed-vessel system. The method was evaluated using a factorial design approach based on parameters such as extraction time, temperature, methanol concentration in water (v/v), and the ratio of grams of sample to 10 mL of solvent. Statistical treatment of the results revealed that the selected parameters were all significant except the extraction time. Optimum conditions would be 1.5 g samples in 10 mL solvent (90% methanol), an extraction temperature of 95 degrees C, and an extraction time of 7 min. The extracts has been analyzed by reverse-phase high-performance liquid chromatography with UV detection (LC/UV) at 227 nm for quantification. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) was used for confirmation. The main advantage of the proposed MAE method versus conventional solvent extraction (CSE) are the considerable reductions in time (7 min versus 16 h) and in solvent consumption (20 mL versus 150 mL). The MAE procedure yielded extracts that could be analyzed directly without any preliminary clean-up or solvent exchange steps. Both extraction methods show RSDs lower than 10% and lead to comparable recoveries of paclitaxel (87-92%).

Chromatography, High Pressure Liquid↗

Monitoring of enzymatic hydrolysis of penicillin G by pyrolysis-negative ion mass spectrometry.

A pyrolysis-negative ion mass spectrometry (Pyr-NIMS) is used for the monitoring of enzymatic hydrolysis of penicillin G (Pen G) to 6-aminopenicillanic acid (6-APA) and phenyl acetic acid (PAA). The high sensitivity and rapid response time of Pyr-NIMS allow its application to the simultaneously determination of these compounds. The mass to charge (m/z) values of 262, 156 and 135 of Pen G, 6-APA and PAA respectively, are used for the quantitative measurements by selected ion monitoring (SIM). The limit of detection (LOD), linearity and relative standard deviation (n=5) are 10 ng ml(-1), 100 ng ml(-1)-1000 mg ml(-1) and 1.5%, respectively The results are compared with high performance liquid chromatography (HPLC). An important advantage of the presented analytical system is the high linearity of signals without preliminary separation and recalibration. The main and interactive effects of pH, temperature and concentration of Pen G for enzymatic hydrolysis of Pen G are studied. Optimize conditions of pH (8), temperature (28 degrees C) and concentration of Pen G (12% w/v) in real samples are obtained.

Chromatography, High Pressure Liquid↗

Monitoring of the pesticide diazinon in soil, stem and surface water of rice fields.

Diazinon is an organophosphorus insecticide (OPP) that is used as a pesticide for Chilo suppressalis (WLK) (Lep., Pyralidae) in rice fields. The extraction of diazinon from soil and the stems of rice plants has been carried out by microwave-assisted extraction (MAE) and the results compared with ultrasonic extraction (USE). The best parameters for MAE are hexane-acetone (8:2 v/v) as a solvent, a 2.5 min extraction time, and 20 ml of the solvent volume. Also, surface-water samples of the rice fields were extracted by solid phase extraction (SPE) using a C18 disc. The optimum conditions of SPE were a sample volume of 750 ml, a pH of 7 and high ionic strength of water. The extracted samples were analyzed by gas chromatography-mass spectrometry (GC-MS). The relative standard deviation (RSD) and regression coefficients related to the linearity were <3.5% (n = 5) and 0.99, respectively. The limit of detection (LOD) is 0.1 ng ml(-1) with selected ion monitoring (SIM) at 137 m/z. The average recoveries of diazinon in soil and stem samples by MAE and surface-water by SPE were 98% (+/-3), 94% (+/-5) and 87% (+/-3), respectively. In June, the concentration of diazinon in soil and stem samples of the rice plants in Guilan province is high (55 ng ml(-1)) and in September is low (2 ng ml(-1)). In surface-water samples, the results are converse. In November, diazinon can not be detected in soil, stem or surface-water samples. Diazinon is degraded to diethylthiophosphoric acid. Also, three microorganism genera (Pseudomonas sp, Flavobacterium sp and Agrobacterium sp) have been found to degrade diazinon in soil and surface water.

Biodegradation, Environmental↗