Lessons learned fighting HIV can be applied to anti-cancer drug design.
Explore the source record for details and available documents.
Biomedical subjects
Publications and source records attributed to Alla Gustchina.
Explore the source record for details and available documents.
Crystals of human T-cell leukemia virus protease (HTLV-1 PR) have been very difficult to prepare and only native data extending to 2.6 angstroms resolution could be collected. Initial attempts to solve the structure with a variety of low-sequence-identity models utilizing proteases from other retroviruses and using a number of molecular-replacement programs were unsuccessful. The structure was finally solved using Phaser, revealing extensive pseudosymmetry and significant deviations from the starting models, features that were likely to be responsible for the initial failures. The steps taken to solve this structure and some of its intriguing crystallographic aspects are discussed.
ATP-dependent Lon proteases are multi-domain enzymes found in all living organisms. All Lon proteases contain an ATPase domain belonging to the AAA(+) superfamily of molecular machines and a proteolytic domain with a serine-lysine catalytic dyad. Lon proteases can be divided into two subfamilies, LonA and LonB, exemplified by the Escherichia coli and Archaeoglobus fulgidus paralogs, respectively. The LonA subfamily is defined by the presence of a large N-terminal domain, whereas the LonB subfamily has no such domain, but has a membrane-spanning domain that anchors the protein to the cytoplasmic side of the membrane. The two subfamilies also differ in their consensus sequences. Recent crystal structures for several individual domains and sub-fragments of Lon proteases have begun to illuminate similarities and differences in structure-function relationships between the two subfamilies. Differences in orientation of the active site residues in several isolated Lon protease domains point to possible roles for the AAA(+) domains and/or substrates in positioning the catalytic residues within the active site. Structures of the proteolytic domains have also indicated a possible hexameric arrangement of subunits in the native state of bacterial Lon proteases. The structure of a large segment of the N-terminal domain has revealed a folding motif present in other protein families of unknown function and should lead to new insights regarding ways in which Lon interacts with substrates or other cellular factors. These first glimpses of the structure of Lon are heralding an exciting new era of research on this ancient family of proteases.
Kumamolisin-As is an acid collagenase with a subtilisin-like fold. Its active site contains a unique catalytic triad, Ser278-Glu78-Asp82, and a putative transition-state stabilizing residue, Asp164. In this study, the mutants D164N and E78H/D164N were engineered in order to replace parts of the catalytic machinery of kumamolisin-As with the residues found in the equivalent positions in subtilisin. Unlike the wild-type and D164N proenzymes, which undergo instantaneous processing to produce their 37-kDa mature forms, the expressed E78H/D164N proenzyme exists as an equilibrated mixture of the nicked and intact forms of the precursor. X-ray crystallographic structures of the mature forms of the two mutants showed that, in each of them, the catalytic Ser278 makes direct hydrogen bonds with the side chain of Asn164. In addition, His78 of the double mutant is distant from Ser278 and Asp82, and the catalytic triad no longer exists. Consistent with these structural alterations around the active site, these mutants showed only low catalytic activity (relative k(cat) at pH 4.0 1.3% for D164N and 0.0001% for E78H/D164N). pH-dependent kinetic studies showed that the single D164N substitution did not significantly alter the logk(cat) vs. pH and log(k(cat)/Km) vs. pH profiles of the enzyme. In contrast, the double mutation resulted in a dramatic switch of the logk(cat) vs. pH profile to one that was consistent with catalysis by means of the Ser278-His78 dyad and Asn164, which may also account for the observed ligation/cleavage equilibrium of the precursor of E78H/D164N. These results corroborate the mechanistic importance of the glutamate-mediated catalytic triad and oxyanion-stabilizing aspartic acid residue for low-pH peptidase activity of the enzyme.
The successful development of a number of HIV-1 protease (PR) inhibitors for the treatment of AIDS has validated the utilization of retroviral PRs as drug targets and necessitated their detailed structural study. Here we report the structure of a complex of human T cell leukemia virus type 1 (HTLV-1) PR with a substrate-based inhibitor bound in subsites P5 through P5'. Although HTLV-1 PR exhibits an overall fold similar to other retroviral PRs, significant structural differences are present in several loop areas, which include the functionally important flaps, previously considered to be structurally highly conserved. Potential key residues responsible for the resistance of HTLV-1 PR to anti-HIV drugs are identified. We expect that the knowledge accumulated during the development of anti-HIV drugs, particularly in overcoming drug resistance, will help in designing a novel class of antileukemia drugs targeting HTLV-1 PR and in predicting their drug-resistance profile. The structure presented here can be used as a starting point for the development of such anticancer therapies.
We report here the first crystal structure of the N-terminal domain of an A-type Lon protease. Lon proteases are ubiquitous, multidomain, ATP-dependent enzymes with both highly specific and non-specific protein binding, unfolding, and degrading activities. We expressed and purified a stable, monomeric 119-amino acid N-terminal subdomain of the Escherichia coli A-type Lon protease and determined its crystal structure at 2.03 A (Protein Data Bank [PDB] code 2ANE). The structure was solved in two crystal forms, yielding 14 independent views. The domain exhibits a unique fold consisting primarily of three twisted beta-sheets and a single long alpha-helix. Analysis of recent PDB depositions identified a similar fold in BPP1347 (PDB code 1ZBO), a 203-amino acid protein of unknown function from Bordetella parapertussis, crystallized as part of a structural genomics effort. BPP1347 shares sequence homology with Lon N-domains and with a family of other independently expressed proteins of unknown functions. We postulate that, as is the case in Lon proteases, this structural domain represents a general protein and polypeptide interaction domain.
The atomic-resolution crystal structure of the proteolytic domain (P-domain, residues 415-621) of Archaeoglobus fulgidus B-type Lon protease (wtAfLonB) and the structures of several mutants have revealed significant differences in the conformation of the active-site residues when compared to other known Lon P-domains, despite the conservation of the overall fold. The catalytic Ser509 is facing the solvent and is distant from Lys552, the other member of the catalytic dyad. Instead, the adjacent Asp508 forms an ion pair with the catalytic lysine residue. Glu506, an analog of the putative third catalytic residue from a related Methanococcus jannaschii LonB, also faces the solvent and does not interact with the catalytic dyad. We have established that full-length wtAfLonB is proteolytically active in an ATP-dependent manner. The loss of enzymatic activity of the S509A mutant confirms the functional significance of this residue, while retention of considerable level of activity by the D508A and E506A mutants rules out their critical involvement in catalysis. In contrast to the full-length enzymes, all individually purified P-domains (wild-type and mutants) were inactive, and the mutations had no influence on the active-site structure. These findings raise the possibility that, although isolated proteolytic domains of both AfLonB and E.coli LonA are able to assemble into expected functional hexamers, the presence of the other domains, as well as substrate binding, may be needed to stabilize the productive conformation of their active sites. Thus, the observed conformational variability may reflect the differences in the stability of active-site structures for the proteolytic counterparts of single-chain Lon versus independently folded proteolytic subunits of two-chain AAA+ proteases.
The crystal structure of Bla g 2 was solved in order to investigate the structural basis for the allergenic properties of this unusual protein. This is the first structure of an aspartic protease in which conserved glycine residues, in two canonical DTG triads, are substituted by different amino acid residues. Another unprecedented feature revealed by the structure is the single phenylalanine residue insertion on the tip of the flap, with the side-chain occupying the S1 binding pocket. This and other important amino acid substitutions in the active site region of Bla g 2 modify the interactions in the vicinity of the catalytic aspartate residues, increasing the distance between them to approximately 4A and establishing unique direct contacts between the flap and the catalytic residues. We attribute the absence of substantial catalytic activity in Bla g 2 to these unusual features of the active site. Five disulfide bridges and a Zn-binding site confer stability to the protein, which may contribute to sensitization at lower levels of exposure than other allergens.
BACKGROUND: Enzymatic activity of mite, fungal, and bee venom allergens is thought to potentiate their allergenicity. Bla g 2 is a potent cockroach allergen, but despite sharing sequence homology with aspartic proteinases, it contains critical amino acid substitutions that impair proteolytic activity. The biologic function of Bla g 2 remains unclear. OBJECTIVE: We sought to investigate the effects of specific amino acid substitutions on enzymatic activity, and the peptide-binding capability of Bla g 2. METHODS: Site-directed mutagenesis was used to produce a recombinant Bla g 2 mutant (Mut) with corrected canonical triads and a flap region. Another mutant (MutF - ) was expressed after additional mutations in the flap region of Mut. Bla g 2 wild-type (Wt), Mut, and MutF - were assayed for aspartic proteinase activity, and Bla g 2 Wt was tested for pepstatin binding. RESULTS: Recombinant Bla g 2 Wt and Mut did not show enzymatic activity in a milk-clotting and hemoglobin assay. By using a modified hemoglobin assay, residual activity inhibited by pepstatin was detected for MutF - and Wt at 20 microg/mL, whereas pepsin was active at a 1000-fold lower concentration. Most of Bla g 2 binding to pepstatin-agarose was nonspecific. CONCLUSION: Residual proteolytic activity was found for Bla g 2 at concentrations of approximately 4 mM. This weak activity suggests that proteolysis is not the primary function of this allergen and that it is unlikely to contribute to the allergenicity of Bla g 2. Bla g 2 has a cleft that might specifically bind ligands other than pepstatin.
The gene encoding an integrase of Mason-Pfizer monkey virus (M-PMV) is located at the 3'-end of the pol open reading frame. The M-PMV integrase has not been previously isolated and characterized. We have now cloned, expressed, isolated, and characterized M-PMV integrase and compared its activities and primary structure with those of HIV-1 and other retroviral integrases. M-PMV integrase prefers untranslated 3'-region-derived long-terminal repeat sequences in both the 3'-processing and the strand transfer activity assays. While the 3'-processing reaction catalyzed by M-PMV integrase was significantly increased in the presence of Mn(2+) and Co(2+) and was readily detectable in the presence of Mg(2+) and Ni(2+) cations, the strand transfer activity was strictly dependent only on Mn(2+). M-PMV integrase displays more relaxed substrate specificity than HIV-1 integrase, catalyzing the cleavage and the strand transfer of M-PMV and HIV-1 long-terminal repeat-derived substrates with similar efficiency. The structure-based sequence alignment of M-PMV, HIV-1, SIV, and ASV integrases predicted critical amino acids and motifs of M-PMV integrase for metal binding, interaction with nucleic acids, dimerization, protein structure maintenance and function, as well as for binding of human immunodeficiency virus type 1 and Rous avian sarcoma virus integrase inhibitors 5-CI-TEP, DHPTPB and Y-3.
Kumamolisin-As (previously called ScpA) is the first known example of a collagenase from the sedolisin family (MEROPS S53). This enzyme is active at low pH and in elevated temperatures. In this study that used x-ray crystallographic and biochemical methods, we investigated the structural basis of the preference of this enzyme for collagen and the importance of a glutamate residue in the unique catalytic triad (Ser(278)-Glu(78)-Asp(82)) for enzymatic activity. Crystal structures of the uninhibited enzyme and its complex with a covalently bound inhibitor, N-acetyl-isoleucyl-prolyl-phenylalaninal, showed the occurrence of a narrow S2 pocket and a groove that encompasses the active site and is rich in negative charges. Limited endoproteolysis studies of bovine type-I collagen as well as kinetic studies using peptide libraries randomized at P1 and P1', showed very strong preference for arginine at the P1 position, which correlated very well with the presence of a negatively charged residue in the S1 pocket of the enzyme. All of these features, together with those predicted through comparisons with fiddler crab collagenase, a serine peptidase, rationalize the enzyme's preference for collagen. A comparison of the Arrhenius plots of the activities of kumamolisin-As with either collagen or peptides as substrates suggests that collagen should be relaxed before proteolysis can occur. The E78H mutant, in which the catalytic triad was engineered to resemble that of subtilisin, showed only 0.01% activity of the wild-type enzyme, and its structure revealed that Ser(278), His(78), and Asp(82) do not interact with each other; thus, the canonical catalytic triad is disrupted.
High-resolution crystallographic analysis of a complex of the serine-carboxyl proteinase sedolisin with pseudo-iodotyrostatin revealed two molecules of this inhibitor bound in the active site of the enzyme, marking subsites from S3 to S3('). The mode of binding represents two products of the proteolytic reaction. Substrate specificity of sedolisin was investigated using peptide libraries and a new peptide substrate for sedolisin, MCA-Lys-Pro-Pro-Leu-Glu#Tyr-Arg-Leu-Gly-Lys(DNP)-Gly, was synthesized based on the results of the enzymatic and crystallographic studies and was shown to be efficiently cleaved by the enzyme. The kinetic parameters for the substrate, measured by the increase in fluorescence upon relief of quenching, were: k(cat)=73+/-5 s(-1), K(m)=0.12+/-0.011 microM, and k(cat)/K(m)=608+/-85 s(-1)microM(-1).
ATP-dependent Lon proteases belong to the superfamily of AAA+ proteins. Until recently, the identity of the residues involved in their proteolytic active sites was not elucidated. However, the putative catalytic Ser-Lys dyad was recently suggested through sequence comparison of more than 100 Lon proteases from various sources. The presence of the catalytic dyad was experimentally confirmed by site-directed mutagenesis of the Escherichia coli Lon protease and by determination of the crystal structure of its proteolytic domain. Furthermore, this extensive sequence analysis allowed the definition of two subfamilies of Lon proteases, LonA and LonB, based on the consensus sequences in the active sites of their proteolytic domains. These differences strictly associate with the specific characteristics of their AAA+ modules, as well as with the presence or absence of an N-terminal domain.
ATP-dependent Lon protease degrades specific short-lived regulatory proteins as well as defective and abnormal proteins in the cell. The crystal structure of the proteolytic domain (P domain) of the Escherichia coli Lon has been solved by single-wavelength anomalous dispersion and refined at 1.75-A resolution. The P domain was obtained by chymotrypsin digestion of the full-length, proteolytically inactive Lon mutant (S679A) or by expression of a recombinant construct encoding only this domain. The P domain has a unique fold and assembles into hexameric rings that likely mimic the oligomerization state of the holoenzyme. The hexamer is dome-shaped, with the six N termini oriented toward the narrower ring surface, which is thus identified as the interface with the ATPase domain in full-length Lon. The catalytic sites lie in a shallow concavity on the wider distal surface of the hexameric ring and are connected to the proximal surface by a narrow axial channel with a diameter of approximately 18 A. Within the active site, the proximity of Lys(722) to the side chain of the mutated Ala(679) and the absence of other potential catalytic side chains establish that Lon employs a Ser(679)-Lys(722) dyad for catalysis. Alignment of the P domain catalytic pocket with those of several Ser-Lys dyad peptide hydrolases provides a model of substrate binding, suggesting that polypeptides are oriented in the Lon active site to allow nucleophilic attack by the serine hydroxyl on the si-face of the peptide bond.
Sedolisins (serine-carboxyl peptidases) are proteolytic enzymes whose fold resembles that of subtilisin; however, they are considerably larger, with the mature catalytic domains containing approximately 375 amino acids. The defining features of these enzymes are a unique catalytic triad, Ser-Glu-Asp, as well as the presence of an aspartic acid residue in the oxyanion hole. High-resolution crystal structures have now been solved for sedolisin from Pseudomonas sp. 101, as well as for kumamolisin from a thermophilic bacterium, Bacillus novo sp. MN-32. The availability of these crystal structures enabled us to model the structure of mammalian CLN2, an enzyme which, when mutated in humans, leads to a fatal neurodegenerative disease. This review compares the structural and enzymatic properties of this newly defined MEROPS family of peptidases, S53, and introduces their new nomenclature.
The structures of the native Saccharomyces cerevisiae proteinase A have been solved by molecular replacement in the monoclinic and trigonal crystal forms and refined at 2.6-2.7A resolution. These structures agree overall with those of other uninhibited aspartic proteinases. However, an unusual orientation for the side chain of Tyr75, a conserved residue on the flexible "flap" that covers the active site and is important for the activity of these enzymes, was found in the trigonal crystals. A similar conformation of Tyr75 occupying the S1 substrate-binding pocket was previously reported only for chymosin (where it was interpreted as representing a "self-inhibited" state of the enzyme), but for no other aspartic proteinases. Since this orientation of Tyr75 has now been seen in the structures of two members of the family of aspartic proteinases, it might indicate that the placement of that residue in the S1 substrate-binding pocket might have some functional significance, analogous to what was seen for self-inhibited structures of serine proteinases.
SUMMARY: The proteases of retroviruses, such as leukemia viruses, immunodeficiency viruses (including the human immunodeficiency virus, HIV), infectious anemia viruses, and mammary tumor viruses, form a family with the proteases encoded by several retrotransposons in Drosophila and yeast and endogenous viral sequences in primates. Retroviral proteases are key enzymes in viral propagation and are initially synthesized with other viral proteins as polyprotein precursors that are subsequently cleaved by the viral protease activity at specific sites to produce mature, functional units. Active retroviral proteases are homodimers, with each dimer structurally related to the larger class of single-chain aspartic peptidases. Each monomer has four structural elements: two distinct hairpin loops, a wide loop containing the catalytic aspartic acid and an alpha helix. Retroviral gene sequences can vary between infected individuals, and mutations affecting the binding cleft of the protease or the substrate cleavage sites can alter the response of the virus to therapeutic drugs. The need to develop new drugs against HIV will continue to be, to a large extent, the driving force behind further characterization of retroviral proteases.
The crystal structure of the small, mostly helical alpha domain of the AAA+ module of the Escherichia coli ATP-dependent protease Lon has been solved by single isomorphous replacement combined with anomalous scattering and refined at 1.9A resolution to a crystallographic R factor of 17.9%. This domain, comprising residues 491-584, was obtained by chymotrypsin digestion of the recombinant full-length protease. The alpha domain of Lon contains four alpha helices and two parallel strands and resembles similar domains found in a variety of ATPases and helicases, including the oligomeric proteases HslVU and ClpAP. The highly conserved "sensor-2" Arg residue is located at the beginning of the third helix. Detailed comparison with the structures of 11 similar domains established the putative location of the nucleotide-binding site in this first fragment of Lon for which a crystal structure has become available.