PubMed Health⌕ Search

Biomedical subjects

Amar H Flood

Publications and source records attributed to Amar H Flood.

At least 19 recordsLinked to original sources
PubMed2007

Switching surface chemistry with supramolecular machines.

Tethered supramolecular machines represent a new class of active self-assembled monolayers in which molecular configurations can be reversibly programmed using electrochemical stimuli. We are using these machines to address the chemistry of substrate surfaces for integrated microfluidic systems. Interactions between the tethered tetracationic cyclophane host cyclobis(paraquat-p-phenylene) and dissolved pi-electron-rich guest molecules, such as tetrathiafulvalene, have been reversibly switched by oxidative electrochemistry. The results demonstrate that surface-bound supramolecular machines can be programmed to adsorb or release appropriately designed solution species for manipulating surface chemistry.

Electrochemistry↗
PubMed2006

Cis- and trans-bis(2-cyanoethylsulfanyl)(decane-1,10-diyldithio)tetrathiafulvalene.

The isomeric title compounds, 2,7-bis(2-cyanoethylsulfanyl)-3,6-(decane-1,10-diyldithio)tetrathiafulvalene and 2,6-bis(2-cyanoethylsulfanyl)-3,7-(decane-1,10-diyldithio)tetrathiafulvalene, both C22H28N2S8, comprise bis(2-cyanoethylsulfanyl)tetrathiafulvalene units tethered by a saturated decamethylenedithio linker attached in either a cis or a trans manner. The tetrathiafulvalene (TTF) group is planar in the cis isomer, but distorted significantly from planarity and twisted about its long axis in the trans isomer. In both structures, intermolecular interactions are segregated into regions in which TTF units are brought into close contact and regions where the polymethylene chains are brought into close contact. In the cis isomer, TTF units exhibit pi-pi stacking interactions, while in the trans isomer they do not.

Journal Article↗
PubMed2006

Supramolecular self-assembly of dendronized polymers: reversible control of the polymer architectures through acid-base reactions.

Acid-base switchable supramolecular dendronized polyacetylenes (DPAs) with increasing steric bulk on going from generation one [G1] to three [G3], were constructed using multiple self-assembly processes between Fréchet-type [G1]-[G3]-dendritic dialkylammonium salts and a dibenzo[24]crown-8-containing polymer. The formation of the supramolecular systems is acid-base switchable to either an ON (rodlike dendronized polymers) or an OFF (flexible polymers) state. Thus, by controlling the superstructures of the supramolecular polymers with the [G1]-[G3] dendrons, it is possible to induce conformational changes within the polymer backbones. The supramolecular dendronized polymers, as well as their threading-dethreading properties, were characterized by (1)H NMR and UV absorption spectroscopies, gel permeation chromatography (GPC) and light scattering (LS). Independent measures of molecular weight (GPC, LS) indicate that DPAs behave as increasingly rigid macromolecules with each generation in solution. Molecular dynamics simulations of each DPA suggest that the lengths of the polymer backbones increase accordingly. Atomic force microscopy of the [G3]-dendronized polystyrene (DPS), as well as the DPAs, reveal surface morphologies indicative of aggregated superstructures.

Journal Article↗
PubMed2006

Locking down the electronic structure of (monopyrrolo)tetrathiafulvalene in [2]rotaxanes.

[reaction: see text] The redox potentials of a highly constrained [2]rotaxane have been measured and used to model the energy of the HOMO of tetrathiafulvalene-based bistable [2]rotaxanes in their two co-conformationally isomeric states. Restrained from co-conformational movements, the measured oxidation and reduction potentials provide insights into the orbital energies and electronic structure of a (monopyrrolo)tetrathiafulvalene unit when encircled by a tetracationic cyclobis(paraquat-p-phenylene) ring.

Journal Article↗
PubMed2006

Autonomous artificial nanomotor powered by sunlight.

Light excitation powers the reversible shuttling movement of the ring component of a rotaxane between two stations located at a 1.3-nm distance on its dumbbell-shaped component. The photoinduced shuttling movement, which occurs in solution, is based on a "four-stroke" synchronized sequence of electronic and nuclear processes. At room temperature the deactivation time of the high-energy charge-transfer state obtained by light excitation is approximately 10 micros, and the time period required for the ring-displacement process is on the order of 100 micros. The rotaxane behaves as an autonomous linear motor and operates with a quantum efficiency up to approximately 12%. The investigated system is a unique example of an artificial linear nanomotor because it gathers together the following features: (i) it is powered by visible light (e.g., sunlight); (ii) it exhibits autonomous behavior, like motor proteins; (iii) it does not generate waste products; (iv) its operation can rely only on intramolecular processes, allowing in principle operation at the single-molecule level; (v) it can be driven at a frequency of 1 kHz; (vi) it works in mild environmental conditions (i.e., fluid solution at ambient temperature); and (vii) it is stable for at least 10(3) cycles.

Absorption↗
PubMed2005

Ground-state equilibrium thermodynamics and switching kinetics of bistable [2]rotaxanes switched in solution, polymer gels, and molecular electronic devices.

We report on the kinetics and ground-state thermodynamics associated with electrochemically driven molecular mechanical switching of three bistable [2]rotaxanes in acetonitrile solution, polymer electrolyte gels, and molecular-switch tunnel junctions (MSTJs). For all rotaxanes a pi-electron-deficient cyclobis(paraquat-p-phenylene) (CBPQT4+) ring component encircles one of two recognition sites within a dumbbell component. Two rotaxanes (RATTF4+ and RTTF4+) contain tetrathiafulvalene (TTF) and 1,5-dioxynaphthalene (DNP) recognition units, but different hydrophilic stoppers. For these rotaxanes, the CBPQT4+ ring encircles predominantly (>90 %) the TTF unit at equilibrium, and this equilibrium is relatively temperature independent. In the third rotaxane (RBPTTF4+), the TTF unit is replaced by a pi-extended analogue (a bispyrrolotetrathiafulvalene (BPTTF) unit), and the CBPQT4+ ring encircles almost equally both recognition sites at equilibrium. This equilibrium exhibits strong temperature dependence. These thermodynamic differences were rationalized by reference to binding constants obtained by isothermal titration calorimetry for the complexation of model guests by the CBPQT4+ host in acetonitrile. For all bistable rotaxanes, oxidation of the TTF (BPTTF) unit is accompanied by movement of the CBPQT4+ ring to the DNP site. Reduction back to TTF0 (BPTTF0) is followed by relaxation to the equilibrium distribution of translational isomers. The relaxation kinetics are strongly environmentally dependent, yet consistent with a single electromechanical-switching mechanism in acetonitrile, polymer electrolyte gels, and MSTJs. The ground-state equilibrium properties of all three bistable [2]rotaxanes were reflective of molecular structure in all environments. These results provide direct evidence for the control by molecular structure of the electronic properties exhibited by the MSTJs.

Journal Article↗
PubMed2005

An electrochemical color-switchable RGB dye: tristable [2]catenane.

We propose a design for an electrochemically driven RGB dye based on a tristable [2]catenane, in which the color of the molecule can be switched between Red, Green, and Blue by merely changing voltage. Based on DFT calculations, we conclude that the tristable [2]catenane should consist of a CBPQT4+ ring interlocked with a polyether macrocyle containing DNP (red), TTF (green), and FBZD (blue) units as the tunable RGB color-generating donors. Thus, at controllable voltages 0, V1, and V2, the [2]catenane is expected to display green, blue, and red colors, respectively. The advent of these RGB tristable molecules may have potential applications in low cost paperlike electronic displays.

Anthracenes↗
PubMed2005

A photoactive molecular triad as a nanoscale power supply for a supramolecular machine.

A tetrathiafulvalene-porphyrin-fullerene (TTF-P-C(60)) molecular triad, which generates electrical current by harnessing light energy when self-assembled onto gold electrodes, has been developed. The triad, composed of three unique electroactive components, namely, 1) an electron-donating TTF unit, 2) a chromophoric porphyrin unit, and 3) an electron-accepting C(60) unit, has been synthesized in a modular fashion. A disulfide-based anchoring group was tagged to the TTF end of the molecule in order to allow its self-assembly on gold surfaces. The surface coverage by the triad in a self-assembled monolayer (SAM) was estimated to be 1.4 nm(2) per molecule, a density which is consistent with hexagonal close-packing of the spherical C(60) component (diameter approximately 1 nm). In a closed electronic circuit, a triad-SAM functionalized working-electrode generates a switchable photocurrent of approximately 1.5 microA cm(-2) when irradiated with a 413 nm Kr-ion laser, a wavelength which is close to the porphyrin chromophore's absorption maximum peak at 420 nm. The electrical energy generated by the triad at the expense of the light energy is ultimately exploited to drive a supramolecular machine in the form of a [2]pseudorotaxane comprised of a pi-electron-deficient tetracationic cyclobis(paraquat-p-phenylene) (CBPQT(4+)) cyclophane and a pi-electron-rich 1,5-bis[(2-hydroxyethoxy) ethoxy]naphthalene (BHEEN) thread. The redox-induced dethreading of the CBPQT(4+) cyclophane from the BHEEN thread can be monitored by measuring the increase in the fluorescence intensity of the BHEEN unit. A gradual increase in the fluorescence intensity of the BHEEN unit concomitant with the photocurrent generation, even at a potential (0 V) much lower than that required (-300 mV) for the direct reduction of the CBPQT(4+) unit, confirms that the dethreading process is driven by the photocurrent generated by the triad-SAM.

Nanotechnology↗
PubMed2005

Molecular dynamics simulation of amphiphilic bistable [2]rotaxane langmuir monolayers at the air/water interface.

Bistable [2]rotaxanes display controllable switching properties in solution, on surfaces, and in devices. These phenomena are based on the electrochemically and electrically driven mechanical shuttling motion of the ring-shaped component, cyclobis(paraquat-p-phenylene) (CBPQT(4+)), between a monopyrrolotetrathiafulvalene (mpTTF) unit and a 1,5-dioxynaphthalene (DNP) unit located along a dumbbell component. The most stable state of the rotaxane (CBPQT(4+)@mpTTF) is that in which the CBPQT(4+) ring encircles the mpTTF unit, but a second less favored metastable co-conformation with the CBPQT(4+) ring surrounding the DNP (CBPQT(4+)@DNP) can be formed experimentally. For both co-conformations of an amphiphilic bistable [2]rotaxane, we report here the structure and surface pressure-area isotherm of a Langmuir monolayer (LM) on a water subphase as a function of the area per molecule. These results from atomistic molecular dynamics (MD) studies are validated by comparing with experiments based on similar amphiphilic rotaxanes. For both co-conformations, we found that as the area per molecule increases the thickness of the LM decreases while the molecular tilt increases. Both co-conformations led to similar LM thicknesses at the same packing area. From the simulated LM systems, we calculated the electron density profiles of the monolayer as a function of area per molecule, which show good agreement with experimental analyses from synchrotron X-ray reflectivity measurements of related systems. Decomposing the overall electron density profiles into component contributions, we found distinct differences in molecular packing in the film depending upon the co-conformation. Thus we find that the necessity of allowing the tetracationic ring to become solvated by water leads to differences in the structures for the two co-conformations in the LM. At the same packing area, the value of the overall tilt angle does not seem to be sensitive to whether the CBPQT(4+) ring is encircling the mpTTF or the DNP unit. However, the conformation of the dumbbell does depend on the location of the CBPQT(4+) ring, which is reflected in the segmental tilt angles of the mpTTF and DNP units. Using the Kirkwood-Buff formula in conjunction with MD calculations, we find the surface pressure-area isotherms for each co-conformation in which the CBPQT(4+)@mpTTF form has smaller surface tension and therefore larger surface pressure than the CBPQT(4+)@DNP at the same packing area, differences that decreases with increasing area per molecule, which is verified experimentally.

Air↗
PubMed2005

Shuttling dynamics in an acid-base-switchable [2]rotaxane.

Molecular shuttles are an intriguing class of rotaxanes which constitute prototypes of mechanical molecular machines and motors. By using stopped-flow spectroscopic techniques in acetonitrile solution, we investigated the kinetics of the shuttling process of a dibenzo[24]crown-8 ether (DB24C8) macrocycle between two recognition sites or "stations"--a secondary ammonium (-NH2+-)/amine (-NH-) center and a 4,4'-bipyridinium (bipy2+) unit--located on the dumbbell component in a [2]rotaxane. The affinity for DB24C8 decreases in the order -NH2+- > bipy2+ > -NH-. Hence, shuttling of the DB24C8 macrocycle can be obtained by deprotonation and reprotonation of the ammonium station, reactions which are easily accomplished by addition of base and acid to the solution. The rate constants were measured as a function of temperature in the range 277-303 K, and activation parameters for the shuttling motion in both directions were determined. The effect of different counterions on the shuttling rates was examined. The shuttling from the -NH2+- to the bipy2+ station, induced by the deprotonation of the ammonium site, is considerably slower than the shuttling in the reverse direction, which is, in turn, activated by reprotonation of the amine site. The results show that the dynamics of the shuttling processes are related to the change in the intercomponent interactions and structural features of the two mutually interlocked molecular components. Our observations also indicate that the counterions of the cationic rotaxane constitute an important contribution to the activation barrier for shuttling.

Journal Article↗
PubMed2005

Linear artificial molecular muscles.

Two switchable, palindromically constituted bistable [3]rotaxanes have been designed and synthesized with a pair of mechanically mobile rings encircling a single dumbbell. These designs are reminiscent of a "molecular muscle" for the purposes of amplifying and harnessing molecular mechanical motions. The location of the two cyclobis(paraquat-p-phenylene) (CBPQT(4+)) rings can be controlled to be on either tetrathiafulvalene (TTF) or naphthalene (NP) stations, either chemically ((1)H NMR spectroscopy) or electrochemically (cyclic voltammetry), such that switching of inter-ring distances from 4.2 to 1.4 nm mimics the contraction and extension of skeletal muscle, albeit on a shorter length scale. Fast scan-rate cyclic voltammetry at low temperatures reveals stepwise oxidations and movements of one-half of the [3]rotaxane and then of the other, a process that appears to be concerted at room temperature. The active form of the bistable [3]rotaxane bears disulfide tethers attached covalently to both of the CBPQT(4+) ring components for the purpose of its self-assembly onto a gold surface. An array of flexible microcantilever beams, each coated on one side with a monolayer of 6 billion of the active bistable [3]rotaxane molecules, undergoes controllable and reversible bending up and down when it is exposed to the synchronous addition of aqueous chemical oxidants and reductants. The beam bending is correlated with flexing of the surface-bound molecular muscles, whereas a monolayer of the dumbbell alone is inactive under the same conditions. This observation supports the hypothesis that the cumulative nanoscale movements within surface-bound "molecular muscles" can be harnessed to perform larger-scale mechanical work.

Biomimetic Materials↗
PubMed2005

A reversible molecular valve.

In everyday life, a macroscopic valve is a device with a movable control element that regulates the flow of gases or liquids by blocking and opening passageways. Construction of such a device on the nanoscale level requires (i) suitably proportioned movable control elements, (ii) a method for operating them on demand, and (iii) appropriately sized passageways. These three conditions can be fulfilled by attaching organic, mechanically interlocked, linear motor molecules that can be operated under chemical, electrical, or optical stimuli to stable inorganic porous frameworks (i.e., by self-assembling organic machinery on top of an inorganic chassis). In this article, we demonstrate a reversibly operating nanovalve that can be turned on and off by redox chemistry. It traps and releases molecules from a maze of nanoscopic passageways in silica by controlling the operation of redox-activated bistable [2]rotaxane molecules tethered to the openings of nanopores leading out of a nanoscale reservoir.

Models, Chemical↗
PubMed2005

The effect of reduction on rhenium(I) complexes with binaphthyridine and biquinoline ligands: a spectroscopic and computational study.

A number of rhenium complexes with binaphthyridine and biquinoline ligands have been synthesized and studied. These are [Re(L)(CO)3Cl] where L = 3,3'-dimethylene-2,2'-bi-1,8-naphthyridine (dbn), 2,2'-bi-1,8-naphthyridine (bn), 3,3'-dimethylene-2,2'-biquinoline (dbq), and 3,3'-dimethyl-2,2'-biquinoline (diq). This series represents ligands in which the electronic properties and steric preferences are tuned. These complexes are modeled using density functional theory (DFT). An analysis of the resonance Raman spectra for these complexes, in concert with the vibrational assignments, reveals that the accepting molecular orbital (MO) in the metal-to-ligand charge transfer (MLCT) transition is the LUMO and causes bonding changes at the inter-ring section of the ligand. The electronic absorption spectroelectrochemistry for the reduced complexes of [Re(dbn)(CO)3Cl], [Re(dbq)(CO)3Cl], and [Re(diq)(CO)3Cl] suggest that the singly occupied MO is delocalized over the entire ligand structure despite the nonplanar nature of the diq ligand in [Re(diq)(CO)3Cl]. The IR spectroelectrochemistry for [Re(dbn)(CO)3Cl], [Re(dbq)(CO)3Cl], and [Re(bn)(CO)3Cl] reveal that reduction lowers the CO ligand vibrational frequencies to a similar extent in all three complexes. The substitution of naphthyridine for quinoline has little effect on the nature of the singly occupied MO. These data are supported by DFT calculations on the reduced complexes, which reveal that the ligands are flattened out by reduction: This may explain the similarity in the properties of the reduced complexes.

Journal Article↗
PubMed2005

Structures and properties of self-assembled monolayers of bistable [2]rotaxanes on Au (111) surfaces from molecular dynamics simulations validated with experiment.

Bistable [2]rotaxanes display controllable switching properties in solution, on surfaces, and in devices. These phenomena are based on the electrochemically and electrically driven mechanical shuttling motion of the ring-shaped component, cyclobis(paraquat-p-phenylene) (CBPQT(4+)) (denoted as the ring), between a tetrathiafulvalene (TTF) unit and a 1,5-dioxynaphthalene (DNP) ring system located along a dumbbell component. When the ring is encircling the TTF unit, this co-conformation of the rotaxane is the most stable and thus designated the ground-state co-conformer (GSCC), whereas the other co-conformation with the ring surrounding the DNP ring system is less favored and so designated the metastable-state co-conformer (MSCC). We report here the structure and properties of self-assembled monolayers (SAMs) of a bistable [2]rotaxane on Au (111) surfaces as a function of surface coverage based on atomistic molecular dynamics (MD) studies with a force field optimized from DFT calculations and we report several experiments that validate the predictions. On the basis of both the total energy per rotaxane and the calculated stress that is parallel to the surface, we find that the optimal packing density of the SAM corresponds to a surface coverage of 115 A(2)/molecule (one molecule per 4 x 4 grid of surface Au atoms) for both the GSCC and MSCC, and that the former is more stable than the latter by 14 kcal/mol at the optimum packing density. We find that the SAM retains hexagonal packing, except for the case at twice the optimum packing density (65 A(2)/molecule, the 3 x 3 grid). For the GSCC and MSCC, investigated at the optimum coverage, the tilt of the ring with respect to the normal is theta = 39 degrees and 61 degrees, respectively, while the tilt angle of the entire rotaxane is psi = 41 degrees and 46 degrees , respectively. Although the tilt angle of the ring decreases with decreasing surface coverage, the tilt angle of the rotaxane has a maximum at 144 A(2)/molecule (the 4 x 5 grid/molecule) of 50 degrees and 51 degrees for the GSCC and MSCC, respectively. The hexafluorophosphate counterions (PF(6)(-)) stay localized around the ring during the 2 ns MD simulation. On the basis of the calculated density profile, we find that the thickness of the SAM is 40.5 A at the optimum coverage for the GSCC and 40.0 A for MSCC, and that the thicknesses become less with decreasing surface coverage. The calculated surface tension at the optimal packing density is 45 and 65 dyn/cm for the GSCC and MSCC, respectively. This difference suggests that the water contact angle for the GSCC is larger than for the MSCC, a prediction that is verified by experiments on Langmuir-Blodgett monolayers of amphiphilic [2]rotaxanes.

Journal Article↗
PubMed2004

Versatile self-complexing compounds based on covalently linked donor-acceptor cyclophanes.

A range of covalently linked donor-acceptor compounds which contain 1) a hydroquinone (HQ) unit, 2) a 1,5-dioxynaphthalene (DNP) ring system, or 3) a tetrathiafulvalene (TTF) unit as the pi-donor, and 4) cyclobis(paraquat-p-phenylene) (CBPQT(4+)) as the pi-accepting tetracationic cyclophane were prepared and shown to operate as simple molecular machines. The pi-donating arms can be included inside the cyclophane in an intramolecular fashion by virtue of stabilizing noncovalent bonding interactions. What amounts to self-complexing/decomplexing equilibria were shown to be highly temperature dependent when the pi-donating arm contains either an HQ or DNP moiety. The thermodynamic parameters associated with the equilibria have been unraveled by using variable-temperature (1)H NMR spectroscopy. The negative DeltaH degrees and DeltaS degrees values account for the fact that the "uncomplexed" conformation becomes the dominant species, since the entropy gain associated with the decomplexation process overcomes the enthalpy loss resulting from the breaking of the donor-acceptor interactions. The arm's in-and-out movements with respect to the linked cyclophanes can be arrested by installing a bulky substituent at the end of the arm. In the case of compounds carrying a DNP ring system in their side arm, two diastereoisomeric, self-complexing conformations are observed below 272 K in hexadeuterioacetone. By contrast, control over the TTF-containing arm's movement is more or less ineffective through the thermally sensitive equilibrium although it can be realized by chemical and electrochemical ways as a result of TTF's excellent redox properties. Such self-complexing compounds could find applications as thermo- and electroswitches. In addition, the thermochromism associated with the arm's movement could lead to some of the compounds finding uses as imaging and sensing materials.

Journal Article↗