Biomedical subjects

Amit Dhingra

Publications and source records attributed to Amit Dhingra.

10 recordsLinked to original sources

PubMed2006

Green light adjusts the plastid transcriptome during early photomorphogenic development.

During the transition from darkness to light, a suite of light sensors guides gene expression, biochemistry, and morphology to optimize acclimation to the new environment. Ultraviolet, blue, red, and far-red light all have demonstrated roles in modulating light responses, such as changes in gene expression and suppression of stem growth rate. However, green wavebands induce stem growth elongation, a response not likely mediated by known photosensors. In this study, etiolated Arabidopsis (Arabidopsis thaliana) seedlings were treated with a short, dim, single pulse of green light comparable in fluence and duration to that previously shown to excite robust stem elongation. Genome microarrays were then used to monitor coincident changes in gene expression. As anticipated, phytochrome A-regulated, nuclear-encoded transcripts were induced, confirming proper function of the sensitive phytochrome system. In addition, a suite of plastid-encoded transcripts decreased in abundance, including several typically up-regulated after phytochrome and/or cryptochrome activation. Further analyses using RNA gel-blot experiments demonstrated that the response is specific to green light, fluence dependent, and detectable within 30 min. The response obeys reciprocity and persists in the absence of known photosensors. Plastid transcript down-regulation was also observed in tobacco (Nicotiana tabacum) with similar temporal and fluence-response kinetics. Together, the down-regulation of plastid transcripts and increase in stem growth rate represent a mechanism that tempers progression of early commitment to the light environment, helping tailor seedling development during the critical process of establishment.

Arabidopsis↗

PubMed2006

Rapid and accurate pyrosequencing of angiosperm plastid genomes.

BACKGROUND: Plastid genome sequence information is vital to several disciplines in plant biology, including phylogenetics and molecular biology. The past five years have witnessed a dramatic increase in the number of completely sequenced plastid genomes, fuelled largely by advances in conventional Sanger sequencing technology. Here we report a further significant reduction in time and cost for plastid genome sequencing through the successful use of a newly available pyrosequencing platform, the Genome Sequencer 20 (GS 20) System (454 Life Sciences Corporation), to rapidly and accurately sequence the whole plastid genomes of the basal eudicot angiosperms Nandina domestica (Berberidaceae) and Platanus occidentalis (Platanaceae). RESULTS: More than 99.75% of each plastid genome was simultaneously obtained during two GS 20 sequence runs, to an average depth of coverage of 24.6x in Nandina and 17.3x in Platanus. The Nandina and Platanus plastid genomes shared essentially identical gene complements and possessed the typical angiosperm plastid structure and gene arrangement. To assess the accuracy of the GS 20 sequence, over 45 kilobases of sequence were generated for each genome using conventional sequencing. Overall error rates of 0.043% and 0.031% were observed in GS 20 sequence for Nandina and Platanus, respectively. More than 97% of all observed errors were associated with homopolymer runs, with approximately 60% of all errors associated with homopolymer runs of 5 or more nucleotides and approximately 50% of all errors associated with regions of extensive homopolymer runs. No substitution errors were present in either genome. Error rates were generally higher in the single-copy and noncoding regions of both plastid genomes relative to the inverted repeat and coding regions. CONCLUSION: Highly accurate and essentially complete sequence information was obtained for the Nandina and Platanus plastid genomes using the GS 20 System. More importantly, the high accuracy observed in the GS 20 plastid genome sequence was generated for a significant reduction in time and cost over traditional shotgun-based genome sequencing techniques, although with approximately half the coverage of previously reported GS 20 de novo genome sequence. The GS 20 should be broadly applicable to angiosperm plastid genome sequencing, and therefore promises to expand the scale of plant genetic and phylogenetic research dramatically.

Base Sequence↗

PubMed2006

Characterization of LF9, an octoploid strawberry genotype selected for rapid regeneration and transformation.

Cultivated strawberry (Fragaria xananassa) is a valuable crop, yet the absence of a rapid, high-throughput transgenic system has precluded meaningful application of biotechnology and translation of information from plant models to this crop. A new octoploid strawberry genetic line Laboratory Festival #9 has been identified, selected solely for its rapid regeneration and efficient transformation. Direct organogenesis has been achieved from all tissues tested, with rapidly-growing shoot initials visible in as few as 13 days. The conditions for optimal shoot regeneration, transformant selection, root generation, and plant acclimatization are presented. The progression from explant to plant in soil can be achieved in about 60 days. The development of transformation protocols in this rapid-cycling genotype allows high-throughput studies of gene function in the octoploid strawberry genetic background.

Acclimatization↗

PubMed2006

Chloroplast genetic engineering via organogenesis or somatic embryogenesis.

Chloroplast genetic engineering offers a number of unique advantages, including high-level transgene expression, multigene engineering in a single transformation event, transgene containment via maternal inheritance, lack of gene silencing, position and pleiotropic effects and undesirable foreign DNA. More than 40 transgenes have been stably integrated and expressed via the tobacco chloroplast genome to confer desired agronomic traits or express high levels of vaccine antigens and biopharmaceuticals. Despite such significant progress, this technology has not been extended to other important plant species. For example, Arabidopsis may be an ideal model system for chloroplast functional genomics. The employment of chloroplast transformation technology in Arabidopsis has been hampered by the lack of an efficient and reproducible protocol that provides fertile chloroplast transgenic plants. Transformation of the Arabidopsis chloroplast genome was achieved via organogenesis but the efficiency was at least a 100-fold lower than in tobacco and had the drawback of polyploidy in the leaf tissue that resulted in sterile transgenic plants. This problem can be overcome by adapting procedures that are now available to regenerate plants from both diploid and tetraploid explants via callus. In addition, it is feasible to regenerate Arabidopsis via somatic embryogenesis. Recent breakthroughs in highly efficient plastid transformation of recalcitrant crops such as cotton and soybean have opened the possibility of engineering Arabidopsis plastid genome via somatic embryogenesis. Therefore, protocols of recent improvements in tissue culture, DNA delivery, and the novel vector designs are provided here in order to achieve highly efficient plastid transformation in Arabidopsis.

Arabidopsis↗

PubMed2005

ASAP: amplification, sequencing & annotation of plastomes.

BACKGROUND: Availability of DNA sequence information is vital for pursuing structural, functional and comparative genomics studies in plastids. Traditionally, the first step in mining the valuable information within a chloroplast genome requires sequencing a chloroplast plasmid library or BAC clones. These activities involve complicated preparatory procedures like chloroplast DNA isolation or identification of the appropriate BAC clones to be sequenced. Rolling circle amplification (RCA) is being used currently to amplify the chloroplast genome from purified chloroplast DNA and the resulting products are sheared and cloned prior to sequencing. Herein we present a universal high-throughput, rapid PCR-based technique to amplify, sequence and assemble plastid genome sequence from diverse species in a short time and at reasonable cost from total plant DNA, using the large inverted repeat region from strawberry and peach as proof of concept. The method exploits the highly conserved coding regions or intergenic regions of plastid genes. Using an informatics approach, chloroplast DNA sequence information from 5 available eudicot plastomes was aligned to identify the most conserved regions. Cognate primer pairs were then designed to generate approximately 1 - 1.2 kb overlapping amplicons from the inverted repeat region in 14 diverse genera. RESULTS: 100% coverage of the inverted repeat region was obtained from Arabidopsis, tobacco, orange, strawberry, peach, lettuce, tomato and Amaranthus. Over 80% coverage was obtained from distant species, including Ginkgo, loblolly pine and Equisetum. Sequence from the inverted repeat region of strawberry and peach plastome was obtained, annotated and analyzed. Additionally, a polymorphic region identified from gel electrophoresis was sequenced from tomato and Amaranthus. Sequence analysis revealed large deletions in these species relative to tobacco plastome thus exhibiting the utility of this method for structural and comparative genomics studies. CONCLUSION: This simple, inexpensive method now allows immediate access to plastid sequence, increasing experimental throughput and serving generally as a universal platform for plastid genome characterization. The method applies well to whole genome studies and speeds assessment of variability across species, making it a useful tool in plastid structural genomics.

Base Sequence↗

PubMed2005

Chloroplast genetic engineering to improve agronomic traits.

Major crop losses occur annually as a result of biotic and abiotic stresses. The ability to hyperexpress foreign proteins, single-step multigene engineering, lack of positive effect and gene silencing, vector sequences and pleiotropic effects have resulted in several hundred-fold more tolerance to the environmental stresses via chloroplast genetic engineering than nuclear genetic engineering. Maternal inheritance of chloroplast expressed transgenes renders the technology environmentally safe and promotes public acceptance. This review provides protocols for engineering agronomic traits like insect, herbicide and disease resistance; salt and drought tolerance; and phyto-remediation via chloroplast genome.

Animals↗

PubMed2004

Plastid-expressed betaine aldehyde dehydrogenase gene in carrot cultured cells, roots, and leaves confers enhanced salt tolerance.

Salinity is one of the major factors that limits geographical distribution of plants and adversely affects crop productivity and quality. We report here high-level expression of betaine aldehyde dehydrogenase (BADH) in cultured cells, roots, and leaves of carrot (Daucus carota) via plastid genetic engineering. Homoplasmic transgenic plants exhibiting high levels of salt tolerance were regenerated from bombarded cell cultures via somatic embryogenesis. Transformation efficiency of carrot somatic embryos was very high, with one transgenic event per approximately seven bombarded plates under optimal conditions. In vitro transgenic carrot cells transformed with the badh transgene were visually green in color when compared to untransformed carrot cells, and this offered a visual selection for transgenic lines. BADH enzyme activity was enhanced 8-fold in transgenic carrot cell cultures, grew 7-fold more, and accumulated 50- to 54-fold more betaine (93-101 micromol g(-1) dry weight of beta-Ala betaine and Gly betaine) than untransformed cells grown in liquid medium containing 100 mm NaCl. Transgenic carrot plants expressing BADH grew in the presence of high concentrations of NaCl (up to 400 mm), the highest level of salt tolerance reported so far among genetically modified crop plants. BADH expression was 74.8% in non-green edible parts (carrots) containing chromoplasts, and 53% in proplastids of cultured cells when compared to chloroplasts (100%) in leaves. Demonstration of plastid transformation via somatic embryogenesis utilizing non-green tissues as recipients of foreign DNA for the first time overcomes two of the major obstacles in extending this technology to important crop plants.

Aldehyde Oxidoreductases↗

PubMed2004

Enhanced translation of a chloroplast-expressed RbcS gene restores small subunit levels and photosynthesis in nuclear RbcS antisense plants.

Ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco) is a key enzyme that converts atmospheric carbon to food and supports life on this planet. Its low catalytic activity and specificity for oxygen leads to photorespiration, severely limiting photosynthesis and crop productivity. Consequently, Rubisco is a primary target for genetic engineering. Separate localization of the genes in the nuclear and chloroplast genomes and a complex assembly process resulting in a very low catalytic activity of hybrid Rubisco enzymes have rendered several earlier attempts of Rubisco engineering unsuccessful. Here we demonstrate that the RbcS gene, when integrated at a transcriptionally active spacer region of the chloroplast genome, in a nuclear RbcS antisense line and expressed under the regulation of heterologous (gene 10) or native (psbA) UTRs, results in the assembly of a functional holoenzyme and normal plant growth under ambient CO(2) conditions, fully shortcircuiting nuclear control of gene regulation. There was approximately 150-fold more RbcS transcript in chloroplast transgenic lines when compared with the nuclear RbcS antisense line, whereas the wild type has 7-fold more transcript. The small subunit protein levels in the gene 10/RbcS and psbA/RbcS plants were 60% and 106%, respectively, of the wild type. Photosynthesis of gene 10/RbcS plants was approximately double that of the antisense plants, whereas that of psbA/RbcS plants was restored almost completely to the wild-type rates. These results have opened an avenue for using chloroplast engineering for the evaluation of foreign Rubisco genes in planta that eventually can result in achieving efficient photosynthesis and increased crop productivity.

Carbon Dioxide↗

PubMed2004

Stable transformation of the cotton plastid genome and maternal inheritance of transgenes.

Chloroplast genetic engineering overcomes concerns of gene containment, low levels of transgene expression, gene silencing, positional and pleiotropic effects or presence of vector sequences in transformed genomes. Several therapeutic proteins and agronomic traits have been highly expressed via the tobacco chloroplast genome but extending this concept to important crops has been a major challenge; lack of 100 homologous species-specific chloroplast transformation vectors containing suitable selectable markers, ability to regulate transgene expression in developing plastids and inadequate tissue culture systems via somatic embryogenesis are major challenges. We employed a 'Double Gene/Single Selection (DGSS)' plastid transformation vector that harbors two selectable marker genes (aph A-6 and npt II) to detoxify the same antibiotic by two enzymes, irrespective of the type of tissues or plastids; by combining this with an efficient regeneration system via somatic embryogenesis, cotton plastid transformation was achieved for the first time. The DGSS transformation vector is at least 8-fold (1 event/2.4 bombarded plates) more efficient than 'Single Gene/Single Selection (SGSS)' vector (aph A-6; 1 event per 20 bombarded plates). Chloroplast transgenic lines were fertile, flowered and set seeds similar to untransformed plants. Transgenes stably integrated into the cotton chloroplast genome were maternally inherited and were not transmitted via pollen when out-crossed with untransformed female plants. Cotton is one of the most important genetically modified crops (120 billion US dollars US annual economy). Successful transformation of the chloroplast genome should address concerns about transgene escape, insects developing resistance, inadequate insect control and promote public acceptance of genetically modified cotton.

Blotting, Southern↗

PubMed2002

Multigene engineering: dawn of an exciting new era in biotechnology.

Development of a rice variety enriched in provitamin A, the accumulation of polyhydroxybutyrate polyester in Arabidopsis nuclear transgenic plants (with enzymes targeted to chloroplasts in both), and the expression of bacterial operons via the chloroplast genome are recent landmark achievements in multigene engineering. Hyper-expression of transgenes has resulted in the formation of insecticidal protein crystals or inclusion bodies of pharmaceutical proteins in transgenic chloroplasts, achieving the highest level of transgene expression ever reported in transgenic plants. These achievements illustrate the potential of multigene engineering to realize benefits of the post-genomic revolution.

Biopharmaceutics↗