Biomedical subjects

André A Poot

Publications and source records attributed to André A Poot.

3 recordsLinked to original sources

PubMed2003

Adhesion and growth of human Schwann cells on trimethylene carbonate (co)polymers.

Seeding of artificial nerve grafts with Schwann cells is a promising strategy for bridging large nerve defects. The aim of the present study was to evaluate the adhesion and growth of human Schwann cells (HSCs) on 1,3-trimethylene carbonate (TMC) and epsilon-caprolactone copolymers, with the final goal of using these materials in the development of an artificial nerve graft. The adhesion, proliferation, and morphology of HSCs on copolymers containing 10 and 82 mol % of TMC and on the parent homopolymers were investigated. HSCs adhered faster and in greater numbers on the copolymer with 82 mol % of TMC and on the TMC homopolymer compared with the other (co)polymers. On all polymer films, cell adhesion was lower than on gelatin (positive control). Despite differences in cell adhesion, cells displayed exponential growth on all tested surfaces, with similar growth rates. Cell numbers doubled approximately every 3 days on all substrates. When the polymer films were coated with fibronectin, no significant differences in cell adhesion and proliferation were observed between coated polymer surfaces and gelatin. The results indicate that all tested materials support the adhesion and proliferation of HSCs and can in principle be used for the preparation of flexible and slowly degrading nerve guides.

Cell Adhesion↗

PubMed2003

Biodegradable elastomeric scaffolds for soft tissue engineering.

Elastomeric copolymers of 1,3-trimethylene carbonate (TMC) and epsilon-caprolactone (CL) and copolymers of TMC and D,L-lactide (DLLA) have been evaluated as candidate materials for the preparation of biodegradable scaffolds for soft tissue engineering. TMC-DLLA copolymers are amorphous and degrade more rapidly in phosphate-buffered saline (PBS) of pH 7.4 at 37 degrees C than (semi-crystalline) TMC-CL copolymers. TMC-DLLA with 20 or 50 mol% TMC loose their tensile strength in less than 5 months and are totally resorbed in 11 months. In PBS, TMC-CL copolymers retain suitable mechanical properties for more than a year. Cell seeding studies show that rat cardiomyocytes and human Schwann cells attach and proliferate well on the TMC-based copolymers. TMC-DLLA copolymers with either 20 or 50 mol% of TMC are totally amorphous and very flexible, making them excellent polymers for the preparation of porous scaffolds for heart tissue engineering. Porous structures of TMC-DLLA copolymers were prepared by compression molding and particulate leaching techniques. TMC-CL (co)polymers were processed into porous two-ply tubes by means of salt leaching (inner layer) and fiber winding (outer layer) techniques. These grafts, seeded with Schwann cells, will be used as nerve guides for the bridging of large peripheral nerve defects.

Animals↗

PubMed2003

Physical properties of high molecular weight 1,3-trimethylene carbonate and D,L-lactide copolymers.

High molecular weight statistical copolymers of 1,3-trimethylene carbonate (TMC) and D,L-lactide (DLLA) were synthesized and characterized with the aim of assessing their potential in the development of degradable and flexible materials for application in the biomedical field. Under the applied polymerization conditions (130 degrees C, 3 days using stannous octoate as a catalyst) monomer conversion was high or almost complete, and high molecular weight polymers (M(n) above 170 000) were obtained. Significant improvement of the mechanical performance of these materials was observed in comparison to results previously reported for TMC and DLLA based copolymers of lower molecular weight. For the entire range of compositions the polymers are amorphous with a glass transition temperature ranging between -17 degrees C for poly(TMC) and 53 degrees C for poly(DLLA). The polymers vary from rubbers to stiff materials as the content of TMC decreases. All polymers are hydrophobic with very low equilibrium water absorption (<1.5 wt %). Thermal analyses and tensile tests were performed on polymer samples after water uptake. Due to a plasticizing effect of the water, the thermal properties, and consequently the mechanical performance, of the copolymers with higher content of DLLA were the most affected. After water absorption, the polymer mechanical behavior can change from glassy to rubbery, as observed for the copolymer with 80 mol % of DLLA. The obtained results suggest that these copolymers are promising candidates as biomaterials in the preparation of degradable medical devices and systems.

Journal Article↗