Biomedical subjects

Andrés J García

Publications and source records attributed to Andrés J García.

At least 19 recordsLinked to original sources

PubMed2007

In vitro and in vivo osteoblastic differentiation of BMP-2- and Runx2-engineered skeletal myoblasts.

Genetic engineering with osteogenic factors is a promising approach for cell-based therapeutics and orthopedic regeneration. However, the relative efficacy of different strategies for inducing osteoblastic differentiation remains unclear and is further complicated by varied delivery vehicles, cell types, and evaluation criteria. In order to elucidate the effects of distinct gene-based strategies, we quantitatively evaluated osteoblastic differentiation and mineralization of primary skeletal myoblasts overexpressing either the BMP-2 growth factor or Runx2 transcription factor. Retroviral delivery of BMP-2 or Runx2 stimulated differentiation into an osteoblastic phenotype, as demonstrated by the induction of osteogenic gene expression, alkaline phosphatase activity, and matrix mineralization in monolayer culture and on collagen scaffolds both in vitro and in an intramuscular site in vivo. In general, BMP-2 stimulated osteoblastic markers faster and to a greater extent than Runx2, although we also identified experimental conditions under which these two factors produced similar effects. Additionally, Runx2-engineered cells did not utilize paracrine signaling via secreted osteogenic factors, in contrast to cells overexpressing BMP-2, as demonstrated by conditioned media studies and activation of Smad signaling. These results emphasize the complexity of gene therapy-based orthopedic therapeutics as an integrated relationship of differentiation state, construct maturation, and paracrine signaling of osteogenic cells. This study is significant in evaluating proposed therapeutic systems and defining a successful strategy for integrating gene medicine and orthopedic regeneration.

Animals↗

PubMed2006

Male fertility and sex ratio at birth in red deer.

Efforts to test sex ratio theory have focused mostly on females. However, when males possess traits that could enhance the reproductive success of sons, males would also benefit from the manipulation of the offspring sex ratio. We tested the prediction that more-fertile red deer males produce more sons. Our findings reveal that male fertility is positively related to the proportion of male offspring. We also show that there is a positive correlation between the percentage of morphologically normal spermatozoa (a main determinant of male fertility) and the proportion of male offspring. Thus, males may contribute significantly to biases in sex ratio at birth among mammals, creating the potential for conflicts of interest between males and females.

Animals↗

PubMed2006

Inhibition of in vitro chondrogenesis in RGD-modified three-dimensional alginate gels.

The goal of this study was to investigate the effects of adhesion to the arginine-glycine-aspartic acid (RGD) sequence on the chondrogenesis of bone marrow stromal cells (BMSCs). Synthetic RGE- and RGD-containing peptides were conjugated to sodium alginate, and bovine BMSCs were seeded onto 2D alginate surfaces or encapsulated in 3D gels. BMSCs spread specifically on RGD-modified surfaces, and spreading was inhibited by a soluble RGD peptide and by anti-beta1 and anti-alpha(v)beta3 integrin blocking antibodies. After 7 days in 3D gel culture, the chondrogenic supplements (TGF-beta1 and dexamethasone) significantly stimulated chondrocytic gene expression (collagen II, aggrecan, and Sox-9) and matrix accumulation (collagen II and sGAG) in RGE-modified gels, but this response was inhibited in the RGD-modified gels. Inhibition of sGAG synthesis increased with increasing RGD density, and synthesis was partially rescued by adding a soluble RGD peptide. Addition of an anti-alpha(v)beta3 integrin blocking antibody had no effect on chondrogenesis, while an anti-alpha5 antibody reduced sGAG accumulation. Overall, this study demonstrates that interaction with the RGD motif significantly inhibits the initial chondrogenesis of BMSCs within 3D alginate gels. These results provide new insights into the role of cell-matrix interactions in regulating chondrogenesis and highlight the importance of choosing appropriate biomaterials for tissue engineering therapies.

Adsorption↗

PubMed2006

Virus-based gene therapy strategies for bone regeneration.

Gene therapy has emerged as a promising strategy for the repair and regeneration of damaged musculoskeletal tissues. Application of this paradigm to bone healing has shown enhanced efficacy in preclinical animal studies compared to conventional bone grafting approaches. This review discusses current and emerging virus-based genetic engineering strategies for the delivery of therapeutic molecules which promote skeletal regeneration. Viral gene delivery vectors are discussed in the context of bone repair in order to illustrate the challenges and applications of these methods with tissue-specific examples. Moreover the concepts discussed can be broadly applied to promote healing in a wide range of tissues. We also present important considerations involved in the application of these gene therapy techniques to a variety of osteogenic (e.g. bone marrow-derived cells) and non-osteogenic (e.g. fibroblasts and skeletal myoblasts) cell types. Criteria for the selection of regenerative molecules with soluble versus intracellular modes of action and emerging combinatorial approaches are also discussed. Overall, gene transfer technologies have the potential to overcome limitations associated with existing bone grafting approaches and may enable investigators to design therapies which more closely mimic the complex spatial and temporal cascade of proteins involved in endogenous bone development and repair.

Animals↗

PubMed2006

Mineralization capacity of Runx2/Cbfa1-genetically engineered fibroblasts is scaffold dependent.

Development of tissue-engineered constructs for skeletal regeneration of large critical-sized defects requires the identification of a sustained mineralizing cell source and careful optimization of scaffold architecture and surface properties. We have recently reported that Runx2-genetically engineered primary dermal fibroblasts express a mineralizing phenotype in monolayer culture, highlighting their potential as an autologous osteoblastic cell source which can be easily obtained in large quantities. The objective of the present study was to evaluate the osteogenic potential of Runx2-expressing fibroblasts when cultured in vitro on three commercially available scaffolds with divergent properties: fused deposition-modeled polycaprolactone (PCL), gas-foamed polylactide-co-glycolide (PLGA), and fibrous collagen disks. We demonstrate that the mineralization capacity of Runx2-engineered fibroblasts is scaffold dependent, with collagen foams exhibiting ten-fold higher mineral volume compared to PCL and PLGA matrices. Constructs were differentially colonized by genetically modified fibroblasts, but scaffold-directed changes in DNA content did not correlate with trends in mineral deposition. Sustained expression of Runx2 upregulated osteoblastic gene expression relative to unmodified control cells, and the magnitude of this expression was modulated by scaffold properties. Histological analyses revealed that matrix mineralization co-localized with cellular distribution, which was confined to the periphery of fibrous collagen and PLGA sponges and around the circumference of PCL microfilaments. Finally, FTIR spectroscopy verified that mineral deposits within all Runx2-engineered scaffolds displayed the chemical signature characteristic of carbonate-containing, poorly crystalline hydroxyapatite. These results highlight the important effect of scaffold properties on the capacity of Runx2-expressing primary dermal fibroblasts to differentiate into a mineralizing osteoblastic phenotype for bone tissue engineering applications.

Animals↗

PubMed2006

Integrin specificity and enhanced cellular activities associated with surfaces presenting a recombinant fibronectin fragment compared to RGD supports.

Biomimetic strategies focusing on presenting short bioadhesive oligopeptides, including the arginine-glycine-aspartic acid (RGD) motif present in numerous adhesive proteins, on a non-fouling support have emerged as promising approaches to improve cellular activities and healing responses. Nevertheless, these bio-inspired strategies are limited by low activity of the oligopeptides compared to the native ligand due to the absence of complementary or modulatory domains. In the present analysis, we generated well-defined biointerfaces presenting RGD-based ligands of increasing complexity to directly compare their biological activities in terms of cell adhesion strength, integrin binding and signaling. Mixed self-assembled monolayers of alkanethiols on gold were optimized to engineer robust supports that present anchoring groups for ligand tethering within a non-fouling, protein adsorption-resistant background. Controlled bioadhesive interfaces were generated by tethering adhesive ligands via standard peptide chemistry. On a molar basis, biointerfaces functionalized with the FNIII7-10 recombinant fragment presenting the RGD and PHSRN adhesive motifs in the correct structural context exhibited significantly higher adhesion strength, FAK activation, and cell proliferation rate than supports presenting RGD ligand or RGD-PHSRN, an oligopeptide presenting these two sites separated by a polyglycine linker. Moreover, FNIII7-10-functionalized surfaces displayed specificity for alpha5beta1 integrin, while cell adhesion to supports presenting RGD or RGD-PHSRN was primarily mediated by alphavbeta3 integrin. These results are significant to the rational engineering of bioactive materials that convey integrin binding specificity for directed cellular and tissue responses in biomedical and biotechnological applications.

Animals↗

PubMed2006

Model of integrin-mediated cell adhesion strengthening.

Cell adhesion to extracellular matrix components involves integrin binding, receptor clustering, and recruitment of cytoskeletal elements, leading to the formation of discrete adhesive structures (focal adhesions). A force balance, macroscopic-to-microscopic model of these adhesive events is presented in the context of experimentally measured parameters. Integrin bond force, bond numbers, and distribution along the contact area strongly modulated the resulting adhesive force. Furthermore, focal adhesion assembly enhanced adhesion strength by 30% over integrin clustering alone. Predicted values are in excellent agreement with experimental results. This model provides a simple framework to systematically analyze the contributions of different adhesive parameters to overall adhesion strength.

Adhesiveness↗

PubMed2006

Thermoreversible laminin-functionalized hydrogel for neural tissue engineering.

Traumatic injury to the central nervous system (CNS) triggers cell death and deafferentation, which may activate a cascade of cellular and network disturbances. These events often result in the formation of irregularly shaped lesions comprised of necrotic tissue and/or a fluid-filled cavity. Tissue engineering represents a promising treatment strategy for the injured neural tissue. To facilitate minimally invasive delivery of a tissue engineered system, a thermoreversible polymer is an attractive scaffold candidate. We have developed a bioactive scaffold for neural tissue engineering by tethering laminin-1 (LN) to methylcellulose (MC), a thermoresponsive hydrogel. The base MC chain was oxidized via sodium m-periodate to increase MC tethering capacity. Protein immobilization was facilitated by a Schiff base reaction between primary amine groups on LN and the carbonyl groups of the oxidized MC chain. Immunoassays demonstrated tethering of LN at 1.6 +/- 0.5 ng of LN per milligram of MC. Rheological measurements for different MC-LN constructs indicated MC composition- and MC treatment-dependent effects on solution-gelation transition temperature. Cellular assays with primary rat cortical neurons demonstrated enhanced cell adhesion and viability on LN-functionalized MC when compared with base and oxidized MC. This bioadhesive thermoresponsive scaffold may provide a robust delivery vehicle to injured CNS tissue for neural cell transplantation strategies.

Animals↗

PubMed2006

Effects of Runx2 genetic engineering and in vitro maturation of tissue-engineered constructs on the repair of critical size bone defects.

Genetic and tissue engineering strategies are being pursued to address the clinical limitations of current bone grafting materials. Based on our previous work demonstrating that overexpression of the Runx2 osteoblastic transcription factor and in vitro construct maturation synergistically enhanced in vivo mineralization in an ectopic site (Byers et al., Tissue Eng 2004;10:1757-1766), we examined the effects of these two parameters on the repair of critical size bone defects. Primary rat bone marrow stromal cells transduced with Runx2 or control (no Runx2 insert) retroviral vector were seeded onto 3D fused deposition-modeled polycaprolactone scaffolds. Runx2-modified cells produced biologically-equivalent mineralized matrices at nearly 2-fold higher rates than control cells. Constructs cultured in vitro for 1 day (immature) or 21 days (mineralized) were subsequently implanted into critical size calvaria defects in syngeneic rats, and bone healing was analyzed by micro-CT and histomorphometry at 28 days. Runx2-modified and control constructs precultured for 1 day healed to a greater extent than defects receiving no implant. Cell-free scaffolds yielded equivalent levels of bone formation as constructs precultured for 1 day. Interestingly, defects treated with control cell-seeded constructs precultured for 21 days exhibited low bone formation compared to other construct treatments, and repair was comparable to empty defects. In contrast, Runx2-modified constructs precultured for 21 days contained twice as much bone as control constructs precultured for 21 days and equivalent levels of new bone as cell-free and 1 day precultured constructs. These results demonstrate interplay between Runx2 genetically-modified cells and in vitro construct maturation in bone healing responses.

Absorbable Implants↗

PubMed2006

Glucocorticoid-induced osteogenesis is negatively regulated by Runx2/Cbfa1 serine phosphorylation.

Glucocorticoid hormones have complex stimulatory and inhibitory effects on skeletal metabolism. Endogenous glucocorticoid signaling is required for normal bone formation in vivo, and synthetic glucocorticoids, such as dexamethasone, promote osteoblastic differentiation in several in vitro model systems. The mechanism by which these hormones induce osteogenesis remains poorly understood. We demonstrate here that the coordinate action of dexamethasone and the osteogenic transcription factor Runx2/Cbfa1 synergistically induces osteocalcin and bone sialoprotein gene expression, alkaline phosphatase activity, and biological mineral deposition in primary dermal fibroblasts. Dexamethasone decreased Runx2 phosphoserine levels, particularly on Ser125, in parallel with the upregulation of mitogen-activated protein kinase (MAPK) phosphatase-1 (MKP-1) through a glucocorticoid-receptor-mediated mechanism. Inhibition of MKP-1 abrogated the dexamethasone-induced decrease in Runx2 serine phosphorylation, suggesting that glucocorticoids modulate Runx2 phosphorylation via MKP-1. Mutation of Ser125 to glutamic acid, mimicking constitutive phosphorylation, inhibited Runx2-mediated osteoblastic differentiation, which was not rescued by dexamethasone treatment. Conversely, mutation of Ser125 to glycine, mimicking constitutive dephosphorylation, markedly increased osteoblastic differentiation, which was enhanced by, but did not require, additional dexamethasone supplementation. Collectively, these results demonstrate that dexamethasone induces osteogenesis, at least in part, by modulating the phosphorylation state of a negative-regulatory serine residue (Ser125) on Runx2. This work identifies a novel mechanism for glucocorticoid-induced osteogenic differentiation and provides insights into the role of Runx2 phosphorylation during skeletal development.

Amino Acid Substitution↗

PubMed2006

Functional lactide monomers: methodology and polymerization.

Side-chain-functionalized lactide analogues have been synthesized from commercially available amino acids and polymerized using stannous octoate as a catalyst. The synthetic strategy presented allows for the incorporation of any protected amino acid for the preparation of functionalized diastereomerically pure lactide monomers. The resulting functionalized cyclic monomers can be homopolymerized and copolymerized with lactides and then quantitatively deprotected forming new functional poly(lactide)-based materials. This strategy allows for the introduction of functional groups along a poly(lactide) (PLA) backbone that after deprotection can be viewed as chemical handles for further functionalization of PLA, yielding improved biomaterials for a variety of applications.

Amino Acids↗

PubMed2005

Combined microscale mechanical topography and chemical patterns on polymer cell culture substrates.

This paper presents a technique to independently form mechanical topography and surface chemical patterns on polymer cell substrates, and studies the response of osteoblast cells to these surface patterns. The patterns were formed in two separate steps: hot embossing imprint lithography formed the mechanical topography and microcontact printing created the chemical pattern. The resulting substrate had surface features consisting of embossed grooves 4 microm deep and 8 microm wide spaced by 16 microm wide mesas and microcontact printed adhesive lanes 10 microm wide with spacings that ranged from 10 to 100 microm. When presented with either mechanical topography or chemical patterns alone, the cells significantly aligned to the pattern presented. When presented with mechanical topography overlaid with an orthogonal chemical pattern, the cells aligned to the mechanical topography. As the chemical pattern spacing was increased, osteoblasts remained aligned to the mechanical topography. Unlike traditional microfabrication approaches based on photolithography and wet chemistry, the patterning technique presented is compatible with a large number of biomaterials, could form patterns with features much smaller than 1 microm, and is highly scalable to large substrates.

3T3 Cells↗

PubMed2005

Cell adhesion strengthening: contributions of adhesive area, integrin binding, and focal adhesion assembly.

Mechanical interactions between a cell and its environment regulate migration, contractility, gene expression, and cell fate. We integrated micropatterned substrates to engineer adhesive area and a hydrodynamic assay to analyze fibroblast adhesion strengthening on fibronectin. Independently of cell spreading, integrin binding and focal adhesion assembly resulted in rapid sevenfold increases in adhesion strength to steady-state levels. Adhesive area strongly modulated adhesion strength, integrin binding, and vinculin and talin recruitment, exhibiting linear increases for small areas. However, above a threshold area, adhesion strength and focal adhesion assembly reached a saturation limit, whereas integrin binding transitioned from a uniform distribution to discrete complexes. Adhesion strength exhibited exponential increases with bound integrin numbers as well as vinculin and talin recruitment, and the relationship between adhesion strength and these biochemical events was accurately described by a simple mechanical model. Furthermore, adhesion strength was regulated by the position of an adhesive patch, comprised of bound integrins and cytoskeletal elements, which generated a constant 200-nN adhesive force. Unexpectedly, focal adhesion assembly, in particular vinculin recruitment, contributed only 30% of the adhesion strength. This work elucidates the roles of adhesive complex size and position in the generation of cell-extracellular matrix forces.

Animals↗

PubMed2005

Integrin binding specificity regulates biomaterial surface chemistry effects on cell differentiation.

Biomaterial surface chemistry has profound consequences on cellular and host responses, but the underlying molecular mechanisms remain poorly understood. Using self-assembled monolayers as model biomaterial surfaces presenting well defined chemistries, we demonstrate that surface chemistry modulates osteoblastic differentiation and matrix mineralization independently from alterations in cell proliferation. Surfaces were precoated with equal densities of fibronectin (FN), and surface chemistry modulated FN structure to alter integrin adhesion receptor binding. OH- and NH(2)-terminated surfaces up-regulated osteoblast-specific gene expression, alkaline phosphatase enzymatic activity, and matrix mineralization compared with surfaces presenting COOH and CH(3) groups. These surface chemistry-dependent differences in cell differentiation were controlled by binding of specific integrins to adsorbed FN. Function-perturbing antibodies against the central cell binding domain of FN completely inhibited matrix mineralization. Furthermore, blocking antibodies against beta(1) integrin inhibited matrix mineralization on the OH and NH(2) surfaces, whereas function-perturbing antibodies specific for beta(3) integrin increased mineralization on the COOH substrate. These results establish surface-dependent differences in integrin binding as a mechanism regulating differential cellular responses to biomaterial surfaces. This mechanism could be exploited to engineer materials that control integrin binding specificity to elicit desired cellular activities to enhance the integration of biomaterials and improve the performance of biotechnological culture supports.

3T3 Cells↗

PubMed2005

Quantitative methods for analysis of integrin binding and focal adhesion formation on biomaterial surfaces.

Integrin binding and focal adhesion assembly are critical to cellular responses to biomaterial surfaces in biomedical and biotechnological applications. While immunostaining techniques to study focal adhesion assembly are well established, a crucial need remains for quantitative methods for analyzing adhesive structures. We present simple yet robust approaches to quantify integrin binding and focal adhesion assembly on biomaterial surfaces. Integrin binding to fibronectin and a RGD-containing synthetic peptide was quantified by sequentially cross-linking integrin-ligand complexes via a water-soluble homo-bifunctional cross-linker, extracting bulk cellular components in detergent, and detecting bound integrins by ELISA. Focal adhesion components (vinculin, talin, alpha-actinin) localized to adhesion plaques were isolated from bulk cytoskeletal and cytoplasmic components by mechanical rupture at a plane close to the basal cell surface and quantified by Western blotting. These approaches represent simple and efficient methodologies to analyze structure-function relationships in cell-material interactions.

3T3 Cells↗

PubMed2005

Get a grip: integrins in cell-biomaterial interactions.

Integrin adhesion receptors have emerged as central regulators of cell-biomaterial interactions. This opinion paper discusses how integrins control cellular and host responses to biomaterials and new strategies to manipulate these adhesive interactions in order to elicit specific cellular responses.

Adsorption↗

PubMed2004

Myoblast proliferation and differentiation on fibronectin-coated self assembled monolayers presenting different surface chemistries.

Biomaterial surface properties modulate protein adsorption and cell adhesion to elicit diverse cellular responses in biomedical and biotechnological applications. We used alkanethiol self-assembled monolayers presenting well-defined chemistries (OH, CH(3), NH(2), and COOH) to analyze the effects of surface chemistry on myoblast proliferation and differentiation. Surfaces were pre-coated with equivalent densities of fibronectin. C2C12 skeletal myoblasts exhibited surface-dependent differences in cell proliferation (COOH = NH(2) > CH(3) = OH). Myogenin and troponin T gene expression levels were up-regulated on CH(3) and OH surfaces compared to other chemistries. Furthermore, immunostaining for sarcomeric myosin revealed surface chemistry-dependent differences in myogenic differentiation following the pattern OH > CH(3) > NH(2) = COOH. Immunostaining analyses of integrin subunits demonstrated surface chemistry-dependent differences in integrin binding to adsorbed fibronectin. OH and CH(3) surfaces supported selective binding of alpha(5)beta(1) integrin while the COOH and NH(2) functionalities displayed binding of both alpha(5)beta(1) and alpha(V)beta(3) Myogenic differentiation correlated with differences in integrin binding; surface chemistries that supported selective binding of alpha(5)beta(1) displayed enhanced differentiation. Finally, blocking beta(1), but not beta(3), integrins inhibited differentiation, implicating specific integrins in the differentiation process. These results demonstrate that surface chemistry modulates myoblast proliferation and differentiation via differences in integrin binding to adsorbed fibronectin.

Animals↗

PubMed2004

Male fertility in natural populations of red deer is determined by sperm velocity and the proportion of normal spermatozoa.

Male reproductive success is determined by the ability of males to gain sexual access to females and by their ability to fertilize ova. Among polygynous mammals, males differ markedly in their reproductive success, and a great deal of effort has been made to understand how selective forces have shaped traits that enhance male competitiveness both before and after copulation (i.e., sperm competition). However, the possibility that males also may differ in their fertility has been ignored under the assumption that male infertility is rare in natural populations because selection against it is likely to be strong. In the present study, we examined which semen traits correlate with male fertility in natural populations of Iberian red deer (Cervus elaphus hispanicus). We found no trade-offs between semen traits. Our analyses revealed strong associations between sperm production and sperm swimming velocity, sperm motility and proportion of morphologically normal spermatozoa, and sperm viability and acrosome integrity. These last two variables had the lowest coefficients of variation, suggesting that these traits have stabilized at high values and are unlikely to be related to fitness. In a fertility trial, our results show a large degree of variation in male fertility, and differences in fertility were determined mainly by sperm swimming velocity and by the proportion of morphologically normal sperm. We conclude that male fertility varies substantially in natural populations of Iberian red deer and that, when sperm numbers are equal, it is determined mainly by sperm swimming velocity and sperm morphology.

Animals↗