PubMed Health⌕ Search

Biomedical subjects

Andrea J O'Connor

Publications and source records attributed to Andrea J O'Connor.

6 recordsLinked to original sources
PubMed2006

A blank slate? Layer-by-layer deposition of hyaluronic acid and chitosan onto various surfaces.

Although poly(alpha-hydroxy esters), especially the PLGA family of lactic acid/glycolic acid copolymers, have many properties which make them promising materials for tissue engineering, the inherent chemistry of surfaces made from these particular polymers is problematic. In vivo, they promote a strong foreign-body response as a result of nonspecific adsorption and denaturation of serum proteins, which generally results in the formation of a nonfunctional fibrous capsule. Surface modification post-production of the scaffolds is an often-utilized approach to solving this problem, conceptually allowing the formation of a scaffold with mechanical properties defined by the bulk material and molecular-level interactions defined by the modified surface properties. A promising concept is the so-called "blank slate": essentially a surface that is rendered resistant to nonspecific protein adsorption but can be readily activated to covalently bind bio-functional molecules such as extracellular matrix proteins, growth factors or polysaccharides. This study focuses on the use of the quartz crystal microbalance (QCM) to follow the layer-by-layer (LbL) electrostatic deposition of high molecular weight hyaluronic acid and chitosan onto PLGA surfaces rendered positively charged by aminolysis, to form a robust, protein-resistant coating. We further show that this surface may be further functionalized via the covalent attachment of collagen IV, which may then be used as a template for the self-assembly of basement membrane components from dilute Matrigel. The response of NIH-3T3 fibroblasts to these surfaces was also followed and shown to closely parallel the results observed in the QCM.

3T3 Cells↗
PubMed2005

Postsynthesis vapor-phase functionalization of MCM-48 with hexamethyldisilazane and 3-aminopropyldimethylethoxylsilane for bioseparation applications.

MCM-48 was surface modified via vapor-phase reactions with hexamethyldisilazane (CH(3)-MCM-48) and 3-aminopropyldimethylethoxysilane (NH(2)-MCM-48). (29)Si NMR confirmed that the resulting materials contained covalently attached trimethylsilane and 3-aminopropyldimethylsilane moieties, both important functionalities for bioseparation applications. The surface coverage was approximately 1.8 and 0.9 groups per nm(2), respectively. The X-ray diffraction patterns and the narrow pore size distributions obtained from the gas sorption isotherms showed that the modified materials retained the characteristic pore structure of the underlying MCM-48 material. CH(3)-MCM-48 exhibited significantly improved hydrolytic stability over the unmodified MCM-48 under the aqueous conditions tested, whereas NH(2)-MCM-48 appeared to be less stable than the unmodified MCM-48. The decrease in stability is most likely due to the nature of the attachment of the 3-aminopropyldimethylsilane moiety, where the conversion of surface silanol groups is limited by H bonding with the amino end, leading to a 50% lower surface concentration and resulting in an increased likelihood of nucleophilic attack on the silica surface, enhancing the rate of hydrolysis. Hexamethyldisilazane thus appears to be a superior functional group for modifying the MCM-48 surface.

Indicators and Reagents↗
PubMed2004

Architecture control of three-dimensional polymeric scaffolds for soft tissue engineering. I. Establishment and validation of numerical models.

One of the most important functions of artificial three-dimensional (3D) polymeric scaffolds is to serve as a physical support to provide tissues with an appropriate architecture for in vitro cell culture as well as in vivo tissue regeneration. The production of three-dimensional (3D) polymeric scaffolds with tailored macroporous architecture is thus a crucial step in promoting controlled vascularization and tissue growth within host environments. In this study, 3D poly(lactic-co-glycolic acid) (PLGA) scaffolds were manufactured by a thermally induced phase-separation (TIPS) technique. By controlling the quenching strategy, 3D interconnected PLGA scaffolds with tunable pore size and alignment were obtained and characterized with the use of scanning electron microscopy (SEM). A series of numerical heat-transfer models were established in an effort to describe the cooling process within the PLGA freezing regime. Among them, a two-dimensional (2D) solidification model has proved to be the most successful in describing the quenching of the polymer solution and has the potential to be used to infer the various 3D macroporous architectures created from different quenching conditions.

Biocompatible Materials↗
PubMed2003

Increasing the volume of vascularized tissue formation in engineered constructs: an experimental study in rats.

The authors have previously described a model of in vivo tissue generation based on an implanted, microsurgically created vessel loop in a plastic chamber (volume, 0.45 ml) containing a poly(DL-lactic-co-glycolic acid) (PLGA) scaffold. Tissue grew spontaneously in association with an intense angiogenic sprouting from the loop and almost filled the chamber, resulting in a mean amount of tissue in chambers of 0.23 g with no added matrix scaffold and 0.33 g of tissue in PLGA-filled chambers after 4 weeks of incubation. The aim of the present study was to investigate whether a greater volume of tissue could be generated when the same-size vessel loop was inserted into a larger (1.9 ml) chamber. In four groups of five rats, an arteriovenous shunt sandwiched between two disks of PLGA, used as a scaffold for structural support, was placed inside a large polycarbonate growth chamber. Tissue and PLGA weight and volume, as well as histological characteristics of the newly formed tissue, were assessed at 2, 4, 6, and 8 weeks. Tissue weight and volume showed a strong linear correlation. Tissue weight increased progressively from 0.13 +/- 0.04 g at 2 weeks to 0.57 +/- 0.06 g at 6 weeks (p < 0.0005). PLGA weight decreased progressively from 0.89 +/- 0.07 g at 2 weeks to 0.20 +/- 0.09 g at 8 weeks (p < 0.0005). Histological examination of the specimens confirmed increased tissue growth and maturation over time. It is concluded that larger quantities of tissue can be grown over a longer period of time by using larger-size growth chambers.

Animals↗
PubMedDate not supplied

Controllable surface modification of poly(lactic-co-glycolic acid) (PLGA) by hydrolysis or aminolysis I: physical, chemical, and theoretical aspects.

While biodegradable, biocompatible polyesters such as poly (lactic-co-glycolic acid) (PLGA) are popular materials for the manufacture of tissue engineering scaffolds, their surface properties are not particularly suitable for directed tissue growth. Although a number of approaches to chemically modify the PLGA surface have been reported, their applicability to soft tissue scaffolds, which combine large volumes, complex shapes, and extremely fine structures, is questionable. In this paper, we describe two wet-chemical methods, base hydrolysis and aminolysis, to introduce useful levels of carboxylic acid or primary and secondary amine groups, respectively, onto the surface of PLGA with minimal degradation. The effects of temperature, concentration, pH, and solvent type on the kinetics of these reactions are studied by following changes in the wettability of the PLGA using contact angle measurements. In addition, the treated surfaces are studied using X-ray photoelectron spectroscopy (XPS) to determine the effect on the surface chemical structure. Furthermore, we show using XPS analysis that these carboxyl and amine groups are readily activated to allow the covalent attachment of biological macromolecules.

Amines↗