PubMed Health⌕ Search

Biomedical subjects

Andreas Engel

Publications and source records attributed to Andreas Engel.

At least 19 recordsLinked to original sources

Ferrofluids as thermal ratchets.

Colloidal suspensions of ferromagnetic nanoparticles, so-called ferrofluids, are shown to be suitable systems to demonstrate and investigate thermal ratchet behavior: By rectifying thermal fluctuations, angular momentum is transferred to a resting ferrofluid from an oscillating magnetic field without net rotating component. Via viscous coupling the noise driven rotation of the microscopic ferromagnetic grains is transmitted to the carrier liquid to yield a macroscopic torque. For a simple setup we analyze the rotation of the ferrofluid theoretically and show that the results are compatible with the outcome of a simple demonstration experiment.

Journal Article↗

Robert Feulgen Lecture. Microscopic assessment of membrane protein structure and function.

Membrane proteins represent an important class of proteins that are encoded by about 40% of all genes, but compared to soluble proteins structural information is sparse. Most of the atomic coordinates currently available are from bacterial membrane proteins and have been obtained by X-ray crystallography. Recent results demonstrate the imaging power of the atomic force microscope and the accuracy of electron crystallography. These methods allow membrane proteins to be studied while embedded in the bilayer, and thus in a functional state. The low signal-to-noise ratio of cryoelectron microscopy is overcome by crystallizing membrane proteins in a two-dimensional protein-lipid membrane, allowing its atomic structure to be determined. In contrast, the high signal-to-noise ratio of atomic force microscopy allows individual protein surfaces to be imaged at subnanometer resolution, and their conformational states to be sampled. This review discusses examples of microscopic membrane protein structure determination and illuminates recent progress.

Animals↗

Type III protein translocase: HrcN is a peripheral ATPase that is activated by oligomerization.

Type III protein secretion (TTS) is catalyzed by translocases that span both membranes of Gram-negative bacteria. A hydrophilic TTS component homologous to F1/V1-ATPases is ubiquitous and essential for secretion. We show that hrcN encodes the putative TTS ATPase of Pseudomonas syringae pathovar phaseolicola and that HrcN is a peripheral protein that assembles in clusters at the membrane. A decahistidinyl HrcN derivative was overexpressed in Escherichia coli and purified to homogeneity in a folded state. Hydrodynamic analysis, cross-linking, and electron microscopy revealed four distinct HrcN forms: I, 48 kDa (monomer); II, approximately 300 kDa (putative hexamer); III, 575 kDa (dodecamer); and IV, approximately 3.5 MDa. Form III is the predominant form of HrcN at the membrane, and its ATPase activity is dramatically stimulated (>700-fold) over the basal activity of Form I. We propose that TTS ATPases catalyze protein translocation as activated homo-oligomers at the plasma membrane.

Adenosine Triphosphatases↗

Phase transition in multiprocessor scheduling.

An "easy-hard" phase transition is shown to characterize the multiprocessor scheduling problem in which one has to distribute the workload on a parallel computer such as to minimize the overall run time. The transition can be analyzed in detail by mapping it on a mean-field antiferromagnetic Potts model. The static phase transition, characterized by a vanishing ground state entropy, corresponds to a transition in the performance of practical scheduling algorithms.

Journal Article↗

Observing membrane protein diffusion at subnanometer resolution.

Single sodium-driven rotors from a bacterial ATP synthase were embedded into a lipid membrane and observed in buffer solution at subnanometer resolution using atomic force microscopy (AFM). Time-lapse AFM topographs show the movement of single proteins within the membrane. Subsequent analysis of their individual trajectories, in consideration of the environment surrounding the moving protein, allow principal modes of the protein motion to be distinguished. Within one trajectory, individual proteins can undergo movements assigned to free as well as to obstacled diffusion. The diffusion constants of these two modes of motion are considerably different. Without the structural information about the membrane environment restricting the moving proteins, it would not be possible to reveal insight into these mechanisms. The high-resolution AFM topographs suggest that, in future studies, such data revealed under various physiological conditions will provide novel insights into molecular mechanisms that drive membrane protein assembly and supply excellent boundary conditions to model protein-protein arrangements.

Diffusion↗

Organization of the G protein-coupled receptors rhodopsin and opsin in native membranes.

G protein-coupled receptors (GPCRs), which constitute the largest and structurally best conserved family of signaling molecules, are involved in virtually all physiological processes. Crystal structures are available only for the detergent-solubilized light receptor rhodopsin. In addition, this receptor is the only GPCR for which the presumed higher order oligomeric state in native membranes has been demonstrated (Fotiadis, D., Liang, Y., Filipek, S., Saperstein, D. A., Engel, A., and Palczewski, K. (2003) Nature 421, 127-128). Here, we have determined by atomic force microscopy the organization of rhodopsin in native membranes obtained from wild-type mouse photoreceptors and opsin isolated from photoreceptors of Rpe65-/- mutant mice, which do not produce the chromophore 11-cis-retinal. The higher order organization of rhodopsin was present irrespective of the support on which the membranes were adsorbed for imaging. Rhodopsin and opsin form structural dimers that are organized in paracrystalline arrays. The intradimeric contact is likely to involve helices IV and V, whereas contacts mainly between helices I and II and the cytoplasmic loop connecting helices V and VI facilitate the formation of rhodopsin dimer rows. Contacts between rows are on the extracellular side and involve helix I. This is the first semi-empirical model of a higher order structure of a GPCR in native membranes, and it has profound implications for the understanding of how this receptor interacts with partner proteins.

Animals↗

Reconstitution of water channel function of an aquaporin overexpressed and purified from Pichia pastoris.

The aquaporin PM28A is one of the major integral proteins in spinach leaf plasma membranes. Phosphorylation/dephosphorylation of Ser274 at the C-terminus and of Ser115 in the first cytoplasmic loop has been shown to regulate the water channel activity of PM28A when expressed in Xenopus oocytes. To understand the mechanisms of the phosphorylation-mediated gating of the channel the structure of PM28A is required. In a first step we have used the methylotrophic yeast Pichia pastoris for expression of the pm28a gene. The expressed protein has a molecular mass of 32462 Da as determined by matrix-assisted laser desorption ionization-mass spectrometry, forms tetramers as revealed by electron microscopy and is functionally active when reconstituted in proteoliposomes. PM28A was efficiently solubilized from urea- and alkali-stripped Pichia membranes by octyl-beta-D-thioglucopyranoside resulting in a final yield of 25 mg of purified protein per liter of cell culture.

Animals↗

The structure of the aquaporin-1 water channel: a comparison between cryo-electron microscopy and X-ray crystallography.

Three different medium-resolution structures of the human water channel aquaporin-1 (AQP1) have been solved by cryo-electron microscopy (cryo-EM) during the last two years. Recently, the structure of the strongly related bovine AQP1 was solved by X-ray crystallography at higher resolution, allowing a validation of the original medium-resolution structures, and providing a good indication for the strengths and limitations of state of the art cryo-EM methods. We present a detailed comparison between the different models, which shows that overall, the structures are highly similar, deviating less than 2.5 A from each other in the helical backbone regions. The two original cryo-EM structures, however, also show a number of significant deviations from the X-ray structure, both in the backbone positions of the transmembrane helices and in the location of the amino acid side-chains facing the pore. In contrast, the third cryo-EM structure that included information from the X-ray structure of the homologous bacterial glycerol facilitator GlpF and that was subsequently refined against cryo-EM AQP1 data, shows a root mean square deviation of 0.9A from the X-ray structure in the helical backbone regions.

Animals↗

Determining molecular forces that stabilize human aquaporin-1.

Atomic force microscopy (AFM) was used to measure the forces stabilizing human aquaporin-1 (hAQP1), a tetrameric transmembrane protein that forms highly specific water channels. To this end, the AFM tip was attached to the C-terminus of hAQP1 and secondary structure elements were extracted from the membrane while the single-molecule force-extension curve was being recorded. Force peaks, reflecting the unfolding of secondary structure elements, could be interpreted in depth using the atomic model of hAQP1. Different classes of force-extension curves indicated the existence of alternative unfolding pathways for individual proteins. In addition, transmembrane helices at the periphery of the hAQP1 tetramer exhibited smaller extraction forces than helices at the interface between hAQP1 monomers. These results represent the first direct assessment of intermolecular forces defining the oligomeric state of a membrane protein.

Aquaporin 1↗

Influence of spacer length on interaction of mannosylated liposomes with human phagocytic cells.

PURPOSE: To improve target specificity and uptake of liposomes by macrophages, one can improve high-affinity receptor binding to mannose determinants with their 175-kDa mannose receptor (MR), which is mainly influenced by the length and flexibility of the spacer between the carbohydrate head group and liposome surface. Liposomes containing alkylmannosides with hydrophilic spacers 0 to 8 ethyleneoxy units (EO) long (Man0...Man8) were used to investigate systematically the effects of spacer length on liposome-cell interactions. METHODS: Concanavalin A (ConA)-induced liposome aggregation was studied by turbidity measurement and cell uptake using PMA-induced HL-60 cells or native human macrophages by determining 6-CF after cell lysis or NBD-fluorescence with flow cytometry. Detection of MR in native cell populations was carried out by an antibody assay using flow cytometry; MR-representing cells were selected analytically. RESULTS: Liposomes containing mannosides with more than one EO spacer length were specifically aggregated by ConA, indicating accessibility of the carbohydrate ligands of these derivatives. Increase in EO spacer units of incorporated mannosides (two or more EO) led to suppression of cellular uptake of mannosylated liposomes by phagocytes lacking MR (HL60, U937). The extent of suppression increased with spacer length. Liposome uptake by native macrophages expressing MR was, on the contrary, improved, particularly by Man6 and Man8. CONCLUSIONS: Uptake of liposomes modified with Man6 or Man8 by native cells was enhanced but did not reach an optimum. Thus, Man6, Man8, and mannosides with even longer spacer arms are of potential use in receptor-mediated targeting.

Cell Communication↗

Generalization and capacity of extensively large two-layered perceptrons.

The generalization ability and storage capacity of a treelike two-layered neural network with a number of hidden units scaling as the input dimension is examined. The mapping from the input to the hidden layer is via Boolean functions; the mapping from the hidden layer to the output is done by a perceptron. The analysis is within the replica framework where an order parameter characterizing the overlap between two networks in the combined space of Boolean functions and hidden-to-output couplings is introduced. The maximal capacity of such networks is found to scale linearly with the logarithm of the number of Boolean functions per hidden unit. The generalization process exhibits a first-order phase transition from poor to perfect learning for the case of discrete hidden-to-output couplings. The critical number of examples per input dimension, alpha(c), at which the transition occurs, again scales linearly with the logarithm of the number of Boolean functions. In the case of continuous hidden-to-output couplings, the generalization error decreases according to the same power law as for the perceptron, with the prefactor being different.

Journal Article↗

Conformational changes in surface structures of isolated connexin 26 gap junctions.

Gap junction channels mediate communication between adjacent cells. Using atomic force microscopy (AFM), we have imaged conformational changes of the cytoplasmic and extracellular surfaces of native connexin 26 gap junction plaques. The cytoplasmic domains of the gap junction surface, imaged at submolecular resolution, form a hexameric pore protruding from the membrane bilayer. Exhibiting an intrinsic flexibility, these cytoplasmic domains, comprising the C-terminal connexin end, reversibly collapse by increasing the forces applied to the AFM stylus. The extracellular connexon surface was imaged after dissection of the gap junction with the AFM stylus. Upon injection of Ca(2+) into the buffer solution, the extracellular channel entrance reduced its diameter from 1.5 to 0.6 nm, a conformational change that is fully reversible and specific among the divalent cations tested. Ca(2+) had a profound effect on the cytoplasmic surface also, inducing the formation of microdomains. Consequently, the plaque height increased by 0.6 nm to 18 nm. This suggests that calcium ions induce conformational changes affecting the structure of both the hemichannels and the intact channels forming cell-cell contacts.

Connexin 26↗

Aquaporin water channels--from atomic structure to clinical medicine.

The water permeability of biological membranes has been a longstanding problem in physiology, but the proteins responsible for this remained unknown until discovery of the aquaporin 1 (AQP1) water channel protein. AQP1 is selectively permeated by water driven by osmotic gradients. The atomic structure of human AQP1 has recently been defined. Each subunit of the tetramer contains an individual aqueous pore that permits single-file passage of water molecules but interrupts the hydrogen bonding needed for passage of protons. At least 10 mammalian aquaporins have been identified, and these are selectively permeated by water (aquaporins) or water plus glycerol (aquaglyceroporins). The sites of expression coincide closely with the clinical phenotypes--ranging from congenital cataracts to nephrogenic diabetes insipidus. More than 200 members of the aquaporin family have been found in plants, microbials, invertebrates and vertebrates, and their importance to the physiology of these organisms is being uncovered.

Animals↗

Jamming transitions and avalanches in the game of Dots-and-Boxes.

We study the game of Dots-and-Boxes from a statistical point of view. The early game can be treated as a case of random sequential adsorption, with a jamming transition that marks the beginning of the end game. We derive a set of differential equations to make predictions about the state of the lattice at the transition, and thus about the distribution of avalanches in the end game.

Journal Article↗

Identification and structure of a putative Ca2+-binding domain at the C terminus of AQP1.

Aquaporin-1 (AQP1) is the first functionally identified aquaporin of a growing family of membrane water channels found in all forms of life. Recently, a possible secondary function as a cyclic guanosine monophosphate (cGMP) gated ion channel was attributed to AQP1. We have reconstituted purified protein from bovine and human red blood cell membranes into highly ordered 2D crystals. The topography of both AQP1s was determined by electron microscopy from freeze-dried, unidirectionally metal-shadowed 2D crystals as well as from surface topographs of native crystals recorded in buffer solution with the atomic force microscope (AFM). In spite of the high level of sequence homology between bovine and human AQP1, the surfaces showed distinct differences. Alignment of both sequences and comparison of the acquired surface topographies with the atomic model of human AQP1 revealed the topographic changes on the surface of bovine AQP1 to be induced by a few amino acid substitutions. A striking degree of sequence homology was found between the carboxyl-terminal domains of AQP1s from different organisms and EF-hands from Ca2+-binding proteins belonging to the calmodulin superfamily, suggesting the existence of a Ca2+-binding site at the C terminus of AQP1 instead of the putative cGMP-binding site reported previously. To unveil its position on the acquired surface topographies, 2D crystals of AQP1 were digested with carboxypeptidase Y, which cleaves off the intracellular C terminus. Difference maps of AFM topographs between the native and the peptidase-treated AQP1s showed the carboxylic tail to be close to the 4-fold symmetry axis of the tetramer. SDS-PAGE and matrix-assisted laser desorption/ionisation mass spectrometry of native and decarboxylated bovine and human AQP1 revealed that the EF-hand motif found at the C terminus of AQP1 was partially resistant to peptidase digestion. The importance of the C-terminal domain is implicated by structural instability of decarboxylated AQP1. A possible role of the C terminus and calcium in translocation of AQP1 in cholangiocytes from intracellular vesicles to the plasma membrane and in triggering its fusion is discussed. Functional studies are now required to identify the physiological role of the Ca2+-binding site.

Amino Acid Sequence↗

Sampling the conformational space of membrane protein surfaces with the AFM.

The atomic force microscope acquires topographs of single native membrane proteins at subnanometer resolution. Owing to the high signal-to-noise ratio, such images allow the conformational space of membrane protein surfaces to be sampled. This is demonstrated by topographs of porin OmpF, aquaporin-Z, and bacteriorhodopsin, all recorded at a lateral resolution of <7 A and a vertical resolution of ~1 A. The amplitudes of the domain movements were estimated from a large number of single molecule topographs and the corresponding energy landscapes calculated. To visualize the motion of protein domains, movies were generated by similarity ranking of the observed protein configurations. Electronic supplementary material to this paper can be obtained by using the Springer Link server located at http://dx.doi.org/10.1007/s00249-001-0197-8

Aquaporins↗

Isolation and characterization of gap junctions from tissue culture cells.

The purification of membrane proteins in a form and amount suitable for structural or biochemical studies still remains a great challenge. Gap junctions have long been studied using electron microscopy and X-ray diffraction. However, only a limited number of proteins in the connexin family have been amenable to protein or membrane purification techniques. Molecular biology techniques for expressing large gap junctions in tissue culture cells combined with improvements in electron crystallography have shown great promise for determining the channel structure to better than 10 A resolution. Here, we have isolated two-dimensional (2D) gap junction crystals from HeLa Cx26 transfectants. This isoform has never been isolated in large fractions from tissues. We characterize these preparations by SDS-PAGE, Western blotting, negative stain electron microscopy and atomic force microscopy. In our preparations, the Cx26 is easily detected in the Western blots and we have increased expression levels so that connexin bands are visible on SDS-PAGE gels. Preliminary assessment of the samples by electron cryo-microscopy shows that these 2D crystals diffract to at least 22 A. Atomic force microscopy of these Cx26 gap junctions show exquisite surface modulation at the extracellular surface in force dissected gap junctions. We also applied our protocol to cell lines such as NRK cells that express endogenous Cx43 and NRK and HeLa cell lines transfected with exogenous connexins. While the gap junction membrane channels are recognizable in negatively stained electron micrographs, these lattices are disordered and the gap junction plaques are smaller. SDS-PAGE and Western blotting revealed expression of connexins, but at a lower level than with our HeLa Cx26 transfectants. Therefore, the purity and morphology of the gap junction plaques depends the size and abundance of the gap junctions in the cell line itself.

Animals↗