Biomedical subjects

Andreas Kohl

Publications and source records attributed to Andreas Kohl.

10 recordsLinked to original sources

PubMed2006

Crystal structure of a consensus-designed ankyrin repeat protein: implications for stability.

Consensus-designed ankyrin repeat (AR) proteins are thermodynamically very stable. The structural analysis of the designed AR protein E3_5 revealed that this stability is due to a regular fold with highly conserved structural motifs and H-bonding networks. However, the designed AR protein E3_19 exhibits a significantly lower stability than E3_5 (9.6 vs. 14.8 kcal/mol), despite 88% sequence identity. To investigate the structural correlations of this stability difference between E3_5 and E3_19, we determined the crystal structure of E3_19 at 1.9 A resolution. E3_19 as well has a regular AR domain fold with the characteristic H-bonding patterns. All structural features of the E3_5 and E3_19 molecules appear to be virtually identical (RMSD(Calpha) approximately 0.7 A). However, clear differences are observed in the surface charge distribution of the two AR proteins. E3_19 features clusters of charged residues and more exposed hydrophobic residues than E3_5. The atomic coordinates of E3_19 have been deposited in the Protein Data Bank. PDB ID: 2BKG.

Amino Acid Sequence↗

PubMed2006

Molecular dynamics study of the stabilities of consensus designed ankyrin repeat proteins.

Two designed ankyrin repeat (AR) proteins (E3_5 and E3_19) are high homologous (with about 87% sequence identity) and their crystal structures have a Calpha atom-positional root-mean-square difference of about 0.14 nm. However, it was found that E3_5 is considerably more stable than E3_19 in guanidinium hydrochloride and thermal denaturation experiments. With the goal of providing insights into the various factors contributing to the stabilities of the designed AR proteins and suggesting possible mutations to enhance their stabilities, homology modeling and molecular dynamics (MD) simulations with explicit solvent have been performed. Because the crystal structure of E3_19 was solved later than that of E3_5, a homology model of E3_19 based on the crystal structure of E3_5 was also used in the simulations. E3_5 shows a very stable trajectory in both crystal and solution simulations. In contrast, the C-terminal repeat of E3_19 unfolds in the simulations starting from either the modeled structure or the crystal structure, although it has a sequence identical to that of E3_5. A continuum electrostatic model was used to estimate the effect of single mutations on protein stability and to study the interaction between the internal ARs and the C-terminal capping AR. Mutations involving charged residues were found to have large effects on stability. Due to the difference in charge distribution in the internal ARs of E3_19 and E3_5, their interaction with the C-terminal capping AR is less favorable in E3_19. The simulation trajectories suggest that the stability of the designed AR proteins can be increased by optimizing the electrostatic interactions within and between the different repeats.

Ankyrin Repeat↗

PubMed2006

Crystal structure of a divalent metal ion transporter CorA at 2.9 angstrom resolution.

CorA family members are ubiquitously distributed transporters of divalent metal cations and are considered to be the primary Mg2+ transporter of Bacteria and Archaea. We have determined a 2.9 angstrom resolution structure of CorA from Thermotoga maritima that reveals a pentameric cone-shaped protein. Two potential regulatory metal binding sites are found in the N-terminal domain that bind both Mg2+ and Co2+. The structure of CorA supports an efflux system involving dehydration and rehydration of divalent metal ions potentially mediated by a ring of conserved aspartate residues at the cytoplasmic entrance and a carbonyl funnel at the periplasmic side of the pore.

Amino Acid Sequence↗

PubMed2005

Intracellular kinase inhibitors selected from combinatorial libraries of designed ankyrin repeat proteins.

The specific intracellular inhibition of protein activity at the protein level allows the determination of protein function in the cellular context. We demonstrate here the use of designed ankyrin repeat proteins as tailor-made intracellular kinase inhibitors. The target was aminoglycoside phosphotransferase (3')-IIIa (APH), which mediates resistance to aminoglycoside antibiotics in pathogenic bacteria and shares structural homology with eukaryotic protein kinases. Combining a selection and screening approach, we isolated 198 potential APH inhibitors from highly diverse combinatorial libraries of designed ankyrin repeat proteins. A detailed analysis of several inhibitors revealed that they bind APH with high specificity and with affinities down to the subnanomolar range. In vitro, the most potent inhibitors showed complete enzyme inhibition, and in vivo, a phenotype comparable with the gene knockout was observed, fully restoring antibiotic sensitivity in resistant bacteria. These results underline the great potential of designed ankyrin repeat proteins for modulation of intracellular protein function.

Amikacin↗

PubMed2005

Allosteric inhibition of aminoglycoside phosphotransferase by a designed ankyrin repeat protein.

Aminoglycoside phosphotransferase (3')-IIIa (APH) is a bacterial kinase that confers antibiotic resistance to many pathogenic bacteria and shares structural homology with eukaryotic protein kinases. We report here the crystal structure of APH, trapped in an inactive conformation by a tailor-made inhibitory ankyrin repeat (AR) protein, at 2.15 A resolution. The inhibitor was selected from a combinatorial library of designed AR proteins. The AR protein binds the C-terminal lobe of APH and thereby stabilizes three alpha helices, which are necessary for substrate binding, in a significantly displaced conformation. BIAcore analysis and kinetic enzyme inhibition experiments are consistent with the proposed allosteric inhibition mechanism. In contrast to most small-molecule kinase inhibitors, the AR proteins are not restricted to active site binding, allowing for higher specificity. Inactive conformations of pharmaceutically relevant enzymes, as can be elucidated with the approach presented here, represent powerful starting points for rational drug design.

Allosteric Regulation↗

PubMed2004

High-affinity binders selected from designed ankyrin repeat protein libraries.

We report here the evolution of ankyrin repeat (AR) proteins in vitro for specific, high-affinity target binding. Using a consensus design strategy, we generated combinatorial libraries of AR proteins of varying repeat numbers with diversified binding surfaces. Libraries of two and three repeats, flanked by 'capping repeats,' were used in ribosome-display selections against maltose binding protein (MBP) and two eukaryotic kinases. We rapidly enriched target-specific binders with affinities in the low nanomolar range and determined the crystal structure of one of the selected AR proteins in complex with MBP at 2.3 A resolution. The interaction relies on the randomized positions of the designed AR protein and is comparable to natural, heterodimeric protein-protein interactions. Thus, our AR protein libraries are valuable sources for binding molecules and, because of the very favorable biophysical properties of the designed AR proteins, an attractive alternative to antibody libraries.

Amino Acid Sequence↗

PubMed2004

Fire and death: the pyrin domain joins the death-domain superfamily.

Apoptosis and inflammation are important cellular processes that are highly regulated through specific protein-protein interactions (PPI). Proteins involved in these signaling cascades often carry PPI domains that belong to the death-domain superfamily. This includes the structurally well-characterized Death Domain (DD), the Death Effector Domain (DED) and the Caspase Recruitment Domain (CARD) subfamilies. Recently, a fourth member of the DD superfamily was identified, the Pyrin Domain (PYD). Based on sequence alignments, homology to other domains occurring in death-signalling pathways, and secondary-structure prediction, the PYD was predicted to have an overall fold similar to other DD superfamily members. Just recently, NMR structures of two PYDs have been determined. The PYD structures not only revealed the DD superfamily fold as previously predicted, but also distinct features that are characteristic exclusively for this subfamily. This review summarizes recent findings and developments regarding structural aspects of the DD superfamily, with a special emphasis on the PPIs of the DD superfamily.

Apoptosis↗

PubMed2003

Designed to be stable: crystal structure of a consensus ankyrin repeat protein.

Ankyrin repeat (AR) proteins mediate innumerable protein-protein interactions in virtually all phyla. This finding suggested the use of AR proteins as designed binding molecules. Based on sequence and structural analyses, we designed a consensus AR with fixed framework and randomized interacting residues. We generated several combinatorial libraries of AR proteins consisting of defined numbers of this repeat. Randomly chosen library members are expressed in soluble form in the cytoplasm of Escherichia coli constituting up to 30% of total cellular protein and show high thermodynamic stability. We determined the crystal structure of one of those library members to 2.0-A resolution, providing insight into the consensus AR fold. Besides the highly complementary hydrophobic repeat-repeat interfaces and the absence of structural irregularities in the consensus AR protein, the regular and extended hydrogen bond networks in the beta-turn and loop regions are noteworthy. Furthermore, all residues found in the turn region of the Ramachandran plot are glycines. Many of these features also occur in natural AR proteins, but not in this rigorous and standardized fashion. We conclude that the AR domain fold is an intrinsically very stable and well-expressed scaffold, able to display randomized interacting residues. This scaffold represents an excellent basis for the design of novel binding molecules.

Amino Acid Sequence↗

PubMed2003

NMR structure of the apoptosis- and inflammation-related NALP1 pyrin domain.

Signaling in apoptosis and inflammation is often mediated by proteins of the death domain superfamily in the Fas/FADD/Caspase-8 or the Apaf-1/Caspase-9 pathways. This superfamily currently comprises the death domain (DD), death effector domain (DED), caspase recruitment domain (CARD), and pyrin domain (PYD) subfamilies. The PYD subfamily is most abundant, but three-dimensional structures are only available for the subfamilies DD, DED, and CARD, which have an antiparallel arrangement of six alpha helices as common fold. This paper presents the NMR structure of PYD of NALP1, a protein that is involved in the innate immune response and is a component of the inflammasome. The structure of NALP1 PYD differs from all other known death domain superfamily structures in that the third alpha helix is replaced by a flexibly disordered loop. This unique feature appears to relate to the molecular basis of familial Mediterranean fever (FMF), a genetic disease caused by single-point mutations.

Adaptor Proteins, Signal Transducing↗

PubMed2002

Identification of a basic surface area of the FADD death effector domain critical for apoptotic signaling.

Death effector domains (DEDs) are protein-protein interaction domains found in the death inducing signaling complex (DISC). Performing a structure-based alignment of all DED sequences we identified a region of high diversity in alpha-helix 3 and propose a classification of DEDs into class I DEDs typically containing a stretch of basic residues in the alpha-helix 3 region whereas DEDs of class II do not. Functional assays using mutants of Fas-associated death domain revealed that this basic region influences binding and recruitment of caspase-8 and cellular FLICE inhibitor protein to the DISC.

Adaptor Proteins, Signal Transducing↗